1
0
Fork 0
flightgear/src/FDM/LaRCsim.hxx

98 lines
2.7 KiB
C++
Raw Normal View History

1998-10-17 01:33:52 +00:00
//*************************************************************************
// LaRCsim.hxx -- interface to the "LaRCsim" flight model
//
// Written by Curtis Olson, started May 1997.
//
// Copyright (C) 1997 Curtis L. Olson - curt@infoplane.com
//
// This program is free software; you can redistribute it and/or
// modify it under the terms of the GNU General Public License as
// published by the Free Software Foundation; either version 2 of the
// License, or (at your option) any later version.
//
// This program is distributed in the hope that it will be useful, but
// WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
//
// $Id$
//*************************************************************************/
1998-10-17 00:43:58 +00:00
#ifndef _LARCSIM_HXX
#define _LARCSIM_HXX
#include "IO360.hxx"
1998-10-17 00:43:58 +00:00
#include "flight.hxx"
I tested: LaRCsim c172 on-ground and in-air starts, reset: all work UIUC Cessna172 on-ground and in-air starts work as expected, reset results in an aircraft that is upside down but does not crash FG. I don't know what it was like before, so it may well be no change. JSBSim c172 and X15 in-air starts work fine, resets now work (and are trimmed), on-ground starts do not -- the c172 ends up on its back. I suspect this is no worse than before. I did not test: Balloon (the weather code returns nan's for the atmosphere data --this is in the weather module and apparently is a linux only bug) ADA (don't know how) MagicCarpet (needs work yet) External (don't know how) known to be broken: LaRCsim c172 on-ground starts with a negative terrain altitude (this happens at KPAO when the scenery is not present). The FDM inits to about 50 feet AGL and the model falls to the ground. It does stay upright, however, and seems to be fine once it settles out, FWIW. To do: --implement set_Model on the bus --bring Christian's weather data into JSBSim -- add default method to bus for updating things like the sin and cos of latitude (for Balloon, MagicCarpet) -- lots of cleanup The files: src/FDM/flight.cxx src/FDM/flight.hxx -- all data members now declared protected instead of private. -- eliminated all but a small set of 'setters', no change to getters. -- that small set is declared virtual, the default implementation provided preserves the old behavior -- all of the vector data members are now initialized. -- added busdump() method -- FG_LOG's all the bus data when called, useful for diagnostics. src/FDM/ADA.cxx -- bus data members now directly assigned to src/FDM/Balloon.cxx -- bus data members now directly assigned to -- changed V_equiv_kts to V_calibrated_kts src/FDM/JSBSim.cxx src/FDM/JSBSim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with JSBSim specific logic -- changed the static FDMExec to a dynamic fdmex (needed so that the JSBSim object can be deleted when a model change is called for) -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- added logic to bring up FGEngInterface objects and set the RPM and throttle values. src/FDM/LaRCsim.cxx src/FDM/LaRCsim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with LaRCsim specific logic, uses LaRCsimIC -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- moved default inertias to here from fg_init.cxx -- eliminated the climb rate calculation. The equivalent, climb_rate = -1*vdown, is now in copy_from_LaRCsim(). src/FDM/LaRCsimIC.cxx src/FDM/LaRCsimIC.hxx -- similar to FGInitialCondition, this class has all the logic needed to turn data like Vc and Mach into the more fundamental quantities LaRCsim needs to initialize. -- put it in src/FDM since it is a class src/FDM/MagicCarpet.cxx -- bus data members now directly assigned to src/FDM/Makefile.am -- adds LaRCsimIC.hxx and cxx src/FDM/JSBSim/FGAtmosphere.h src/FDM/JSBSim/FGDefs.h src/FDM/JSBSim/FGInitialCondition.cpp src/FDM/JSBSim/FGInitialCondition.h src/FDM/JSBSim/JSBSim.cpp -- changes to accomodate the new bus src/FDM/LaRCsim/atmos_62.h src/FDM/LaRCsim/ls_geodesy.h -- surrounded prototypes with #ifdef __cplusplus ... #endif , functions here are needed in LaRCsimIC src/FDM/LaRCsim/c172_main.c src/FDM/LaRCsim/cherokee_aero.c src/FDM/LaRCsim/ls_aux.c src/FDM/LaRCsim/ls_constants.h src/FDM/LaRCsim/ls_geodesy.c src/FDM/LaRCsim/ls_geodesy.h src/FDM/LaRCsim/ls_step.c src/FDM/UIUCModel/uiuc_betaprobe.cpp -- changed PI to LS_PI, eliminates preprocessor naming conflict with weather module src/FDM/LaRCsim/ls_interface.c src/FDM/LaRCsim/ls_interface.h -- added function ls_set_model_dt() src/Main/bfi.cxx -- eliminated calls that set the NED speeds to body components. They are no longer needed and confuse the new bus. src/Main/fg_init.cxx -- eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). or set default values. The bus now handles the defaults and updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- added fgVelocityInit() to set the speed the user asked for. Both JSBSim and LaRCsim can now be initialized using any of: vc,mach, NED components, UVW components. src/Main/main.cxx --eliminated call to fgFDMSetGroundElevation, this data is now 'pulled' onto the bus every update() src/Main/options.cxx src/Main/options.hxx -- added enum to keep track of the speed requested by the user -- eliminated calls to set NED velocity properties to body speeds, they are no longer needed. -- added options for the NED components. src/Network/garmin.cxx src/Network/nmea.cxx --eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). The bus now updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- changed set_V_equiv_kts to set_V_calibrated_kts. set_V_equiv_kts no longer exists ( get_V_equiv_kts still does, though) src/WeatherCM/FGLocalWeatherDatabase.cpp -- commented out the code to put the weather data on the bus, a different scheme for this is needed.
2000-10-24 00:34:50 +00:00
#include <FDM/LaRCsimIC.hxx>
1998-10-17 00:43:58 +00:00
1999-10-11 23:09:07 +00:00
class FGLaRCsim: public FGInterface {
1998-10-17 00:43:58 +00:00
2001-06-06 19:12:24 +00:00
private:
FGNewEngine eng;
I tested: LaRCsim c172 on-ground and in-air starts, reset: all work UIUC Cessna172 on-ground and in-air starts work as expected, reset results in an aircraft that is upside down but does not crash FG. I don't know what it was like before, so it may well be no change. JSBSim c172 and X15 in-air starts work fine, resets now work (and are trimmed), on-ground starts do not -- the c172 ends up on its back. I suspect this is no worse than before. I did not test: Balloon (the weather code returns nan's for the atmosphere data --this is in the weather module and apparently is a linux only bug) ADA (don't know how) MagicCarpet (needs work yet) External (don't know how) known to be broken: LaRCsim c172 on-ground starts with a negative terrain altitude (this happens at KPAO when the scenery is not present). The FDM inits to about 50 feet AGL and the model falls to the ground. It does stay upright, however, and seems to be fine once it settles out, FWIW. To do: --implement set_Model on the bus --bring Christian's weather data into JSBSim -- add default method to bus for updating things like the sin and cos of latitude (for Balloon, MagicCarpet) -- lots of cleanup The files: src/FDM/flight.cxx src/FDM/flight.hxx -- all data members now declared protected instead of private. -- eliminated all but a small set of 'setters', no change to getters. -- that small set is declared virtual, the default implementation provided preserves the old behavior -- all of the vector data members are now initialized. -- added busdump() method -- FG_LOG's all the bus data when called, useful for diagnostics. src/FDM/ADA.cxx -- bus data members now directly assigned to src/FDM/Balloon.cxx -- bus data members now directly assigned to -- changed V_equiv_kts to V_calibrated_kts src/FDM/JSBSim.cxx src/FDM/JSBSim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with JSBSim specific logic -- changed the static FDMExec to a dynamic fdmex (needed so that the JSBSim object can be deleted when a model change is called for) -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- added logic to bring up FGEngInterface objects and set the RPM and throttle values. src/FDM/LaRCsim.cxx src/FDM/LaRCsim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with LaRCsim specific logic, uses LaRCsimIC -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- moved default inertias to here from fg_init.cxx -- eliminated the climb rate calculation. The equivalent, climb_rate = -1*vdown, is now in copy_from_LaRCsim(). src/FDM/LaRCsimIC.cxx src/FDM/LaRCsimIC.hxx -- similar to FGInitialCondition, this class has all the logic needed to turn data like Vc and Mach into the more fundamental quantities LaRCsim needs to initialize. -- put it in src/FDM since it is a class src/FDM/MagicCarpet.cxx -- bus data members now directly assigned to src/FDM/Makefile.am -- adds LaRCsimIC.hxx and cxx src/FDM/JSBSim/FGAtmosphere.h src/FDM/JSBSim/FGDefs.h src/FDM/JSBSim/FGInitialCondition.cpp src/FDM/JSBSim/FGInitialCondition.h src/FDM/JSBSim/JSBSim.cpp -- changes to accomodate the new bus src/FDM/LaRCsim/atmos_62.h src/FDM/LaRCsim/ls_geodesy.h -- surrounded prototypes with #ifdef __cplusplus ... #endif , functions here are needed in LaRCsimIC src/FDM/LaRCsim/c172_main.c src/FDM/LaRCsim/cherokee_aero.c src/FDM/LaRCsim/ls_aux.c src/FDM/LaRCsim/ls_constants.h src/FDM/LaRCsim/ls_geodesy.c src/FDM/LaRCsim/ls_geodesy.h src/FDM/LaRCsim/ls_step.c src/FDM/UIUCModel/uiuc_betaprobe.cpp -- changed PI to LS_PI, eliminates preprocessor naming conflict with weather module src/FDM/LaRCsim/ls_interface.c src/FDM/LaRCsim/ls_interface.h -- added function ls_set_model_dt() src/Main/bfi.cxx -- eliminated calls that set the NED speeds to body components. They are no longer needed and confuse the new bus. src/Main/fg_init.cxx -- eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). or set default values. The bus now handles the defaults and updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- added fgVelocityInit() to set the speed the user asked for. Both JSBSim and LaRCsim can now be initialized using any of: vc,mach, NED components, UVW components. src/Main/main.cxx --eliminated call to fgFDMSetGroundElevation, this data is now 'pulled' onto the bus every update() src/Main/options.cxx src/Main/options.hxx -- added enum to keep track of the speed requested by the user -- eliminated calls to set NED velocity properties to body speeds, they are no longer needed. -- added options for the NED components. src/Network/garmin.cxx src/Network/nmea.cxx --eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). The bus now updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- changed set_V_equiv_kts to set_V_calibrated_kts. set_V_equiv_kts no longer exists ( get_V_equiv_kts still does, though) src/WeatherCM/FGLocalWeatherDatabase.cpp -- commented out the code to put the weather data on the bus, a different scheme for this is needed.
2000-10-24 00:34:50 +00:00
LaRCsimIC* lsic;
void set_ls(void);
void snap_shot(void);
I tested: LaRCsim c172 on-ground and in-air starts, reset: all work UIUC Cessna172 on-ground and in-air starts work as expected, reset results in an aircraft that is upside down but does not crash FG. I don't know what it was like before, so it may well be no change. JSBSim c172 and X15 in-air starts work fine, resets now work (and are trimmed), on-ground starts do not -- the c172 ends up on its back. I suspect this is no worse than before. I did not test: Balloon (the weather code returns nan's for the atmosphere data --this is in the weather module and apparently is a linux only bug) ADA (don't know how) MagicCarpet (needs work yet) External (don't know how) known to be broken: LaRCsim c172 on-ground starts with a negative terrain altitude (this happens at KPAO when the scenery is not present). The FDM inits to about 50 feet AGL and the model falls to the ground. It does stay upright, however, and seems to be fine once it settles out, FWIW. To do: --implement set_Model on the bus --bring Christian's weather data into JSBSim -- add default method to bus for updating things like the sin and cos of latitude (for Balloon, MagicCarpet) -- lots of cleanup The files: src/FDM/flight.cxx src/FDM/flight.hxx -- all data members now declared protected instead of private. -- eliminated all but a small set of 'setters', no change to getters. -- that small set is declared virtual, the default implementation provided preserves the old behavior -- all of the vector data members are now initialized. -- added busdump() method -- FG_LOG's all the bus data when called, useful for diagnostics. src/FDM/ADA.cxx -- bus data members now directly assigned to src/FDM/Balloon.cxx -- bus data members now directly assigned to -- changed V_equiv_kts to V_calibrated_kts src/FDM/JSBSim.cxx src/FDM/JSBSim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with JSBSim specific logic -- changed the static FDMExec to a dynamic fdmex (needed so that the JSBSim object can be deleted when a model change is called for) -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- added logic to bring up FGEngInterface objects and set the RPM and throttle values. src/FDM/LaRCsim.cxx src/FDM/LaRCsim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with LaRCsim specific logic, uses LaRCsimIC -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- moved default inertias to here from fg_init.cxx -- eliminated the climb rate calculation. The equivalent, climb_rate = -1*vdown, is now in copy_from_LaRCsim(). src/FDM/LaRCsimIC.cxx src/FDM/LaRCsimIC.hxx -- similar to FGInitialCondition, this class has all the logic needed to turn data like Vc and Mach into the more fundamental quantities LaRCsim needs to initialize. -- put it in src/FDM since it is a class src/FDM/MagicCarpet.cxx -- bus data members now directly assigned to src/FDM/Makefile.am -- adds LaRCsimIC.hxx and cxx src/FDM/JSBSim/FGAtmosphere.h src/FDM/JSBSim/FGDefs.h src/FDM/JSBSim/FGInitialCondition.cpp src/FDM/JSBSim/FGInitialCondition.h src/FDM/JSBSim/JSBSim.cpp -- changes to accomodate the new bus src/FDM/LaRCsim/atmos_62.h src/FDM/LaRCsim/ls_geodesy.h -- surrounded prototypes with #ifdef __cplusplus ... #endif , functions here are needed in LaRCsimIC src/FDM/LaRCsim/c172_main.c src/FDM/LaRCsim/cherokee_aero.c src/FDM/LaRCsim/ls_aux.c src/FDM/LaRCsim/ls_constants.h src/FDM/LaRCsim/ls_geodesy.c src/FDM/LaRCsim/ls_geodesy.h src/FDM/LaRCsim/ls_step.c src/FDM/UIUCModel/uiuc_betaprobe.cpp -- changed PI to LS_PI, eliminates preprocessor naming conflict with weather module src/FDM/LaRCsim/ls_interface.c src/FDM/LaRCsim/ls_interface.h -- added function ls_set_model_dt() src/Main/bfi.cxx -- eliminated calls that set the NED speeds to body components. They are no longer needed and confuse the new bus. src/Main/fg_init.cxx -- eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). or set default values. The bus now handles the defaults and updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- added fgVelocityInit() to set the speed the user asked for. Both JSBSim and LaRCsim can now be initialized using any of: vc,mach, NED components, UVW components. src/Main/main.cxx --eliminated call to fgFDMSetGroundElevation, this data is now 'pulled' onto the bus every update() src/Main/options.cxx src/Main/options.hxx -- added enum to keep track of the speed requested by the user -- eliminated calls to set NED velocity properties to body speeds, they are no longer needed. -- added options for the NED components. src/Network/garmin.cxx src/Network/nmea.cxx --eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). The bus now updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- changed set_V_equiv_kts to set_V_calibrated_kts. set_V_equiv_kts no longer exists ( get_V_equiv_kts still does, though) src/WeatherCM/FGLocalWeatherDatabase.cpp -- commented out the code to put the weather data on the bus, a different scheme for this is needed.
2000-10-24 00:34:50 +00:00
double time_step;
2001-06-06 19:12:24 +00:00
SGPropertyNode *speed_up;
SGPropertyNode *aero;
I tested: LaRCsim c172 on-ground and in-air starts, reset: all work UIUC Cessna172 on-ground and in-air starts work as expected, reset results in an aircraft that is upside down but does not crash FG. I don't know what it was like before, so it may well be no change. JSBSim c172 and X15 in-air starts work fine, resets now work (and are trimmed), on-ground starts do not -- the c172 ends up on its back. I suspect this is no worse than before. I did not test: Balloon (the weather code returns nan's for the atmosphere data --this is in the weather module and apparently is a linux only bug) ADA (don't know how) MagicCarpet (needs work yet) External (don't know how) known to be broken: LaRCsim c172 on-ground starts with a negative terrain altitude (this happens at KPAO when the scenery is not present). The FDM inits to about 50 feet AGL and the model falls to the ground. It does stay upright, however, and seems to be fine once it settles out, FWIW. To do: --implement set_Model on the bus --bring Christian's weather data into JSBSim -- add default method to bus for updating things like the sin and cos of latitude (for Balloon, MagicCarpet) -- lots of cleanup The files: src/FDM/flight.cxx src/FDM/flight.hxx -- all data members now declared protected instead of private. -- eliminated all but a small set of 'setters', no change to getters. -- that small set is declared virtual, the default implementation provided preserves the old behavior -- all of the vector data members are now initialized. -- added busdump() method -- FG_LOG's all the bus data when called, useful for diagnostics. src/FDM/ADA.cxx -- bus data members now directly assigned to src/FDM/Balloon.cxx -- bus data members now directly assigned to -- changed V_equiv_kts to V_calibrated_kts src/FDM/JSBSim.cxx src/FDM/JSBSim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with JSBSim specific logic -- changed the static FDMExec to a dynamic fdmex (needed so that the JSBSim object can be deleted when a model change is called for) -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- added logic to bring up FGEngInterface objects and set the RPM and throttle values. src/FDM/LaRCsim.cxx src/FDM/LaRCsim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with LaRCsim specific logic, uses LaRCsimIC -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- moved default inertias to here from fg_init.cxx -- eliminated the climb rate calculation. The equivalent, climb_rate = -1*vdown, is now in copy_from_LaRCsim(). src/FDM/LaRCsimIC.cxx src/FDM/LaRCsimIC.hxx -- similar to FGInitialCondition, this class has all the logic needed to turn data like Vc and Mach into the more fundamental quantities LaRCsim needs to initialize. -- put it in src/FDM since it is a class src/FDM/MagicCarpet.cxx -- bus data members now directly assigned to src/FDM/Makefile.am -- adds LaRCsimIC.hxx and cxx src/FDM/JSBSim/FGAtmosphere.h src/FDM/JSBSim/FGDefs.h src/FDM/JSBSim/FGInitialCondition.cpp src/FDM/JSBSim/FGInitialCondition.h src/FDM/JSBSim/JSBSim.cpp -- changes to accomodate the new bus src/FDM/LaRCsim/atmos_62.h src/FDM/LaRCsim/ls_geodesy.h -- surrounded prototypes with #ifdef __cplusplus ... #endif , functions here are needed in LaRCsimIC src/FDM/LaRCsim/c172_main.c src/FDM/LaRCsim/cherokee_aero.c src/FDM/LaRCsim/ls_aux.c src/FDM/LaRCsim/ls_constants.h src/FDM/LaRCsim/ls_geodesy.c src/FDM/LaRCsim/ls_geodesy.h src/FDM/LaRCsim/ls_step.c src/FDM/UIUCModel/uiuc_betaprobe.cpp -- changed PI to LS_PI, eliminates preprocessor naming conflict with weather module src/FDM/LaRCsim/ls_interface.c src/FDM/LaRCsim/ls_interface.h -- added function ls_set_model_dt() src/Main/bfi.cxx -- eliminated calls that set the NED speeds to body components. They are no longer needed and confuse the new bus. src/Main/fg_init.cxx -- eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). or set default values. The bus now handles the defaults and updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- added fgVelocityInit() to set the speed the user asked for. Both JSBSim and LaRCsim can now be initialized using any of: vc,mach, NED components, UVW components. src/Main/main.cxx --eliminated call to fgFDMSetGroundElevation, this data is now 'pulled' onto the bus every update() src/Main/options.cxx src/Main/options.hxx -- added enum to keep track of the speed requested by the user -- eliminated calls to set NED velocity properties to body speeds, they are no longer needed. -- added options for the NED components. src/Network/garmin.cxx src/Network/nmea.cxx --eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). The bus now updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- changed set_V_equiv_kts to set_V_calibrated_kts. set_V_equiv_kts no longer exists ( get_V_equiv_kts still does, though) src/WeatherCM/FGLocalWeatherDatabase.cpp -- commented out the code to put the weather data on the bus, a different scheme for this is needed.
2000-10-24 00:34:50 +00:00
1999-10-11 23:09:07 +00:00
public:
2001-06-06 19:12:24 +00:00
FGLaRCsim( double dt );
I tested: LaRCsim c172 on-ground and in-air starts, reset: all work UIUC Cessna172 on-ground and in-air starts work as expected, reset results in an aircraft that is upside down but does not crash FG. I don't know what it was like before, so it may well be no change. JSBSim c172 and X15 in-air starts work fine, resets now work (and are trimmed), on-ground starts do not -- the c172 ends up on its back. I suspect this is no worse than before. I did not test: Balloon (the weather code returns nan's for the atmosphere data --this is in the weather module and apparently is a linux only bug) ADA (don't know how) MagicCarpet (needs work yet) External (don't know how) known to be broken: LaRCsim c172 on-ground starts with a negative terrain altitude (this happens at KPAO when the scenery is not present). The FDM inits to about 50 feet AGL and the model falls to the ground. It does stay upright, however, and seems to be fine once it settles out, FWIW. To do: --implement set_Model on the bus --bring Christian's weather data into JSBSim -- add default method to bus for updating things like the sin and cos of latitude (for Balloon, MagicCarpet) -- lots of cleanup The files: src/FDM/flight.cxx src/FDM/flight.hxx -- all data members now declared protected instead of private. -- eliminated all but a small set of 'setters', no change to getters. -- that small set is declared virtual, the default implementation provided preserves the old behavior -- all of the vector data members are now initialized. -- added busdump() method -- FG_LOG's all the bus data when called, useful for diagnostics. src/FDM/ADA.cxx -- bus data members now directly assigned to src/FDM/Balloon.cxx -- bus data members now directly assigned to -- changed V_equiv_kts to V_calibrated_kts src/FDM/JSBSim.cxx src/FDM/JSBSim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with JSBSim specific logic -- changed the static FDMExec to a dynamic fdmex (needed so that the JSBSim object can be deleted when a model change is called for) -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- added logic to bring up FGEngInterface objects and set the RPM and throttle values. src/FDM/LaRCsim.cxx src/FDM/LaRCsim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with LaRCsim specific logic, uses LaRCsimIC -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- moved default inertias to here from fg_init.cxx -- eliminated the climb rate calculation. The equivalent, climb_rate = -1*vdown, is now in copy_from_LaRCsim(). src/FDM/LaRCsimIC.cxx src/FDM/LaRCsimIC.hxx -- similar to FGInitialCondition, this class has all the logic needed to turn data like Vc and Mach into the more fundamental quantities LaRCsim needs to initialize. -- put it in src/FDM since it is a class src/FDM/MagicCarpet.cxx -- bus data members now directly assigned to src/FDM/Makefile.am -- adds LaRCsimIC.hxx and cxx src/FDM/JSBSim/FGAtmosphere.h src/FDM/JSBSim/FGDefs.h src/FDM/JSBSim/FGInitialCondition.cpp src/FDM/JSBSim/FGInitialCondition.h src/FDM/JSBSim/JSBSim.cpp -- changes to accomodate the new bus src/FDM/LaRCsim/atmos_62.h src/FDM/LaRCsim/ls_geodesy.h -- surrounded prototypes with #ifdef __cplusplus ... #endif , functions here are needed in LaRCsimIC src/FDM/LaRCsim/c172_main.c src/FDM/LaRCsim/cherokee_aero.c src/FDM/LaRCsim/ls_aux.c src/FDM/LaRCsim/ls_constants.h src/FDM/LaRCsim/ls_geodesy.c src/FDM/LaRCsim/ls_geodesy.h src/FDM/LaRCsim/ls_step.c src/FDM/UIUCModel/uiuc_betaprobe.cpp -- changed PI to LS_PI, eliminates preprocessor naming conflict with weather module src/FDM/LaRCsim/ls_interface.c src/FDM/LaRCsim/ls_interface.h -- added function ls_set_model_dt() src/Main/bfi.cxx -- eliminated calls that set the NED speeds to body components. They are no longer needed and confuse the new bus. src/Main/fg_init.cxx -- eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). or set default values. The bus now handles the defaults and updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- added fgVelocityInit() to set the speed the user asked for. Both JSBSim and LaRCsim can now be initialized using any of: vc,mach, NED components, UVW components. src/Main/main.cxx --eliminated call to fgFDMSetGroundElevation, this data is now 'pulled' onto the bus every update() src/Main/options.cxx src/Main/options.hxx -- added enum to keep track of the speed requested by the user -- eliminated calls to set NED velocity properties to body speeds, they are no longer needed. -- added options for the NED components. src/Network/garmin.cxx src/Network/nmea.cxx --eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). The bus now updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- changed set_V_equiv_kts to set_V_calibrated_kts. set_V_equiv_kts no longer exists ( get_V_equiv_kts still does, though) src/WeatherCM/FGLocalWeatherDatabase.cpp -- commented out the code to put the weather data on the bus, a different scheme for this is needed.
2000-10-24 00:34:50 +00:00
~FGLaRCsim(void);
1999-10-11 23:09:07 +00:00
// copy FDM state to LaRCsim structures
bool copy_to_LaRCsim();
1998-10-17 00:43:58 +00:00
1999-10-11 23:09:07 +00:00
// copy FDM state from LaRCsim structures
bool copy_from_LaRCsim();
1999-10-11 23:09:07 +00:00
// reset flight params to a specific position
void init();
1999-10-11 23:09:07 +00:00
// update position based on inputs, positions, velocities, etc.
void update( double dt );
I tested: LaRCsim c172 on-ground and in-air starts, reset: all work UIUC Cessna172 on-ground and in-air starts work as expected, reset results in an aircraft that is upside down but does not crash FG. I don't know what it was like before, so it may well be no change. JSBSim c172 and X15 in-air starts work fine, resets now work (and are trimmed), on-ground starts do not -- the c172 ends up on its back. I suspect this is no worse than before. I did not test: Balloon (the weather code returns nan's for the atmosphere data --this is in the weather module and apparently is a linux only bug) ADA (don't know how) MagicCarpet (needs work yet) External (don't know how) known to be broken: LaRCsim c172 on-ground starts with a negative terrain altitude (this happens at KPAO when the scenery is not present). The FDM inits to about 50 feet AGL and the model falls to the ground. It does stay upright, however, and seems to be fine once it settles out, FWIW. To do: --implement set_Model on the bus --bring Christian's weather data into JSBSim -- add default method to bus for updating things like the sin and cos of latitude (for Balloon, MagicCarpet) -- lots of cleanup The files: src/FDM/flight.cxx src/FDM/flight.hxx -- all data members now declared protected instead of private. -- eliminated all but a small set of 'setters', no change to getters. -- that small set is declared virtual, the default implementation provided preserves the old behavior -- all of the vector data members are now initialized. -- added busdump() method -- FG_LOG's all the bus data when called, useful for diagnostics. src/FDM/ADA.cxx -- bus data members now directly assigned to src/FDM/Balloon.cxx -- bus data members now directly assigned to -- changed V_equiv_kts to V_calibrated_kts src/FDM/JSBSim.cxx src/FDM/JSBSim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with JSBSim specific logic -- changed the static FDMExec to a dynamic fdmex (needed so that the JSBSim object can be deleted when a model change is called for) -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- added logic to bring up FGEngInterface objects and set the RPM and throttle values. src/FDM/LaRCsim.cxx src/FDM/LaRCsim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with LaRCsim specific logic, uses LaRCsimIC -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- moved default inertias to here from fg_init.cxx -- eliminated the climb rate calculation. The equivalent, climb_rate = -1*vdown, is now in copy_from_LaRCsim(). src/FDM/LaRCsimIC.cxx src/FDM/LaRCsimIC.hxx -- similar to FGInitialCondition, this class has all the logic needed to turn data like Vc and Mach into the more fundamental quantities LaRCsim needs to initialize. -- put it in src/FDM since it is a class src/FDM/MagicCarpet.cxx -- bus data members now directly assigned to src/FDM/Makefile.am -- adds LaRCsimIC.hxx and cxx src/FDM/JSBSim/FGAtmosphere.h src/FDM/JSBSim/FGDefs.h src/FDM/JSBSim/FGInitialCondition.cpp src/FDM/JSBSim/FGInitialCondition.h src/FDM/JSBSim/JSBSim.cpp -- changes to accomodate the new bus src/FDM/LaRCsim/atmos_62.h src/FDM/LaRCsim/ls_geodesy.h -- surrounded prototypes with #ifdef __cplusplus ... #endif , functions here are needed in LaRCsimIC src/FDM/LaRCsim/c172_main.c src/FDM/LaRCsim/cherokee_aero.c src/FDM/LaRCsim/ls_aux.c src/FDM/LaRCsim/ls_constants.h src/FDM/LaRCsim/ls_geodesy.c src/FDM/LaRCsim/ls_geodesy.h src/FDM/LaRCsim/ls_step.c src/FDM/UIUCModel/uiuc_betaprobe.cpp -- changed PI to LS_PI, eliminates preprocessor naming conflict with weather module src/FDM/LaRCsim/ls_interface.c src/FDM/LaRCsim/ls_interface.h -- added function ls_set_model_dt() src/Main/bfi.cxx -- eliminated calls that set the NED speeds to body components. They are no longer needed and confuse the new bus. src/Main/fg_init.cxx -- eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). or set default values. The bus now handles the defaults and updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- added fgVelocityInit() to set the speed the user asked for. Both JSBSim and LaRCsim can now be initialized using any of: vc,mach, NED components, UVW components. src/Main/main.cxx --eliminated call to fgFDMSetGroundElevation, this data is now 'pulled' onto the bus every update() src/Main/options.cxx src/Main/options.hxx -- added enum to keep track of the speed requested by the user -- eliminated calls to set NED velocity properties to body speeds, they are no longer needed. -- added options for the NED components. src/Network/garmin.cxx src/Network/nmea.cxx --eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). The bus now updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- changed set_V_equiv_kts to set_V_calibrated_kts. set_V_equiv_kts no longer exists ( get_V_equiv_kts still does, though) src/WeatherCM/FGLocalWeatherDatabase.cpp -- commented out the code to put the weather data on the bus, a different scheme for this is needed.
2000-10-24 00:34:50 +00:00
// Positions
void set_Latitude(double lat); //geocentric
void set_Longitude(double lon);
void set_Altitude(double alt); // triggers re-calc of AGL altitude
void set_AltitudeAGL(double altagl); // and vice-versa
// Speeds -- setting any of these will trigger a re-calc of the rest
void set_V_calibrated_kts(double vc);
void set_Mach_number(double mach);
void set_Velocities_Local( double north, double east, double down );
void set_Velocities_Wind_Body( double u, double v, double w);
// Euler angles
void set_Euler_Angles( double phi, double theta, double psi );
// Flight Path
void set_Climb_Rate( double roc);
void set_Gamma_vert_rad( double gamma);
// Earth
void set_Static_pressure(double p);
void set_Static_temperature(double T);
void set_Density(double rho);
From: "Jim Wilson" <jimw@kelcomaine.com> This is a new improved patch for the previous tile manager fixes. Rather than building dependencies between FGlocation or the viewer or fdm with tilemgr what I ended up doing was linking the pieces together in the Mainloop in main.cxx. You'll see what I mean...it's been commented fairly well. More than likely we should move that chunk somewhere...just not sure where yet. The changes seem clean now. As I get more ideas there could be some further improvement in organizing the update in tilemgr. You'll note that I left an override in there for the tilemgr::update() function to preserve earlier functionality if someone needs it (e.g. usage independent of an fdm or viewer), not to mention there are a few places in flightgear that call it directly that have not been changed to the new interface (and may not need to be). The code has been optimized to avoid duplicate traversals and seems to run generally quite well. Note that there can be a short delay reloading tiles that have been dropped from static views. We could call the tile scheduler on a view switch, but it's not a big deal and at the moment I'd like to get this in so people can try it and comment on it as it is. Everything has been resycned with CVS tonight and I've included the description submitted earlier (below). Best, Jim Changes synced with CVS approx 20:30EDT 2002-05-09 (after this evenings updates). Files: http://www.spiderbark.com/fgfs/viewer-update-20020516.tar.gz or http://www.spiderbark.com/fgfs/viewer-update-20020516.diffs.gz Description: In a nutshell, these patches begin to take what was one value for ground elevation and calculate ground elevation values seperately for the FDM and the viewer (eye position). Several outstanding view related bugs have been fixed. With the introduction of the new viewer code a lot of that Flight Gear code broke related to use of a global variable called "scenery.cur_elev". Therefore the ground_elevation and other associated items (like the current tile bucket) is maintained per FDM instance and per View. Each of these has a "point" or location that can be identified. See changes to FGLocation class and main.cxx. Most of the problems related to the new viewer in terms of sky, ground and runway lights, and tower views are fixed. There are four minor problems remaining. 1) The sun/moon spins when you pan the "lookat" tower view only (view #3). 2) Under stress (esp. magic carpet full speed with max visibility), there is a memory leak in the tile caching that was not introduced with these changes. 3) I have not tested these changes or made corrections to the ADA or External FDM interfaces. 4) The change view function doesn't call the time/light update (not a problem unless a tower is very far away). Details: FDM/flight.cxx, flight.hxx - FGInterface ties to FGAircraftModel so that it's location data can be accessed for runway (ground elevation under aircraft) elevation. FDM/larsim.cxx, larcsim.hxx - gets runway elevation from FGInterface now. Commented out function that is causing a namespace conflict, hasn't been called with recent code anyway. FDM/JSBSim/JSBSim.cxx, YASim/YASim.cxx - gets runway elevation from FGInterface now. Scenery/newcache.cxx, newcache.hxx - changed caching scheme to time based (oldest tiles discard). Scenery/tileentry.cxx, tileentry.hxx - added place to record time, changed rendering to reference viewer altitude in order to fix a problem with ground and runway lights. Scenery/tilemgr.cxx, tilemgr.hxx - Modified update() to accept values for multiple locations. Refresh function added in order to periodically make the tiles current for a non-moving view (like a tower). Main/fg_init.cxx - register event for making tiles current in a non-moving view (like a tower). Main/location.hxx - added support for current ground elevation data. Main/main.cxx - added second tilemgr call for fdm, fixed places where viewer position data was required for correct sky rendering. Main/options.cxx - fixed segfault reported by Curtis when using --view-offset command line parameter. Main/viewer.cxx, viewer.hxx - removed fudging of view position. Fixed numerous bugs that were causing eye and target values to get mixed up.
2002-05-17 17:25:28 +00:00
/*
I tested: LaRCsim c172 on-ground and in-air starts, reset: all work UIUC Cessna172 on-ground and in-air starts work as expected, reset results in an aircraft that is upside down but does not crash FG. I don't know what it was like before, so it may well be no change. JSBSim c172 and X15 in-air starts work fine, resets now work (and are trimmed), on-ground starts do not -- the c172 ends up on its back. I suspect this is no worse than before. I did not test: Balloon (the weather code returns nan's for the atmosphere data --this is in the weather module and apparently is a linux only bug) ADA (don't know how) MagicCarpet (needs work yet) External (don't know how) known to be broken: LaRCsim c172 on-ground starts with a negative terrain altitude (this happens at KPAO when the scenery is not present). The FDM inits to about 50 feet AGL and the model falls to the ground. It does stay upright, however, and seems to be fine once it settles out, FWIW. To do: --implement set_Model on the bus --bring Christian's weather data into JSBSim -- add default method to bus for updating things like the sin and cos of latitude (for Balloon, MagicCarpet) -- lots of cleanup The files: src/FDM/flight.cxx src/FDM/flight.hxx -- all data members now declared protected instead of private. -- eliminated all but a small set of 'setters', no change to getters. -- that small set is declared virtual, the default implementation provided preserves the old behavior -- all of the vector data members are now initialized. -- added busdump() method -- FG_LOG's all the bus data when called, useful for diagnostics. src/FDM/ADA.cxx -- bus data members now directly assigned to src/FDM/Balloon.cxx -- bus data members now directly assigned to -- changed V_equiv_kts to V_calibrated_kts src/FDM/JSBSim.cxx src/FDM/JSBSim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with JSBSim specific logic -- changed the static FDMExec to a dynamic fdmex (needed so that the JSBSim object can be deleted when a model change is called for) -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- added logic to bring up FGEngInterface objects and set the RPM and throttle values. src/FDM/LaRCsim.cxx src/FDM/LaRCsim.hxx -- bus data members now directly assigned to -- implemented the FGInterface virtual setters with LaRCsim specific logic, uses LaRCsimIC -- implemented constructor and destructor, moved some of the logic formerly in init() to constructor -- moved default inertias to here from fg_init.cxx -- eliminated the climb rate calculation. The equivalent, climb_rate = -1*vdown, is now in copy_from_LaRCsim(). src/FDM/LaRCsimIC.cxx src/FDM/LaRCsimIC.hxx -- similar to FGInitialCondition, this class has all the logic needed to turn data like Vc and Mach into the more fundamental quantities LaRCsim needs to initialize. -- put it in src/FDM since it is a class src/FDM/MagicCarpet.cxx -- bus data members now directly assigned to src/FDM/Makefile.am -- adds LaRCsimIC.hxx and cxx src/FDM/JSBSim/FGAtmosphere.h src/FDM/JSBSim/FGDefs.h src/FDM/JSBSim/FGInitialCondition.cpp src/FDM/JSBSim/FGInitialCondition.h src/FDM/JSBSim/JSBSim.cpp -- changes to accomodate the new bus src/FDM/LaRCsim/atmos_62.h src/FDM/LaRCsim/ls_geodesy.h -- surrounded prototypes with #ifdef __cplusplus ... #endif , functions here are needed in LaRCsimIC src/FDM/LaRCsim/c172_main.c src/FDM/LaRCsim/cherokee_aero.c src/FDM/LaRCsim/ls_aux.c src/FDM/LaRCsim/ls_constants.h src/FDM/LaRCsim/ls_geodesy.c src/FDM/LaRCsim/ls_geodesy.h src/FDM/LaRCsim/ls_step.c src/FDM/UIUCModel/uiuc_betaprobe.cpp -- changed PI to LS_PI, eliminates preprocessor naming conflict with weather module src/FDM/LaRCsim/ls_interface.c src/FDM/LaRCsim/ls_interface.h -- added function ls_set_model_dt() src/Main/bfi.cxx -- eliminated calls that set the NED speeds to body components. They are no longer needed and confuse the new bus. src/Main/fg_init.cxx -- eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). or set default values. The bus now handles the defaults and updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- added fgVelocityInit() to set the speed the user asked for. Both JSBSim and LaRCsim can now be initialized using any of: vc,mach, NED components, UVW components. src/Main/main.cxx --eliminated call to fgFDMSetGroundElevation, this data is now 'pulled' onto the bus every update() src/Main/options.cxx src/Main/options.hxx -- added enum to keep track of the speed requested by the user -- eliminated calls to set NED velocity properties to body speeds, they are no longer needed. -- added options for the NED components. src/Network/garmin.cxx src/Network/nmea.cxx --eliminated calls that just brought the bus data up-to-date (e.g. set_sin_cos_latitude). The bus now updates itself when the setters are called (for LaRCsim and JSBSim). A default method for doing this needs to be added to the bus. -- changed set_V_equiv_kts to set_V_calibrated_kts. set_V_equiv_kts no longer exists ( get_V_equiv_kts still does, though) src/WeatherCM/FGLocalWeatherDatabase.cpp -- commented out the code to put the weather data on the bus, a different scheme for this is needed.
2000-10-24 00:34:50 +00:00
void set_Velocities_Local_Airmass (double wnorth,
double weast,
double wdown );
From: "Jim Wilson" <jimw@kelcomaine.com> This is a new improved patch for the previous tile manager fixes. Rather than building dependencies between FGlocation or the viewer or fdm with tilemgr what I ended up doing was linking the pieces together in the Mainloop in main.cxx. You'll see what I mean...it's been commented fairly well. More than likely we should move that chunk somewhere...just not sure where yet. The changes seem clean now. As I get more ideas there could be some further improvement in organizing the update in tilemgr. You'll note that I left an override in there for the tilemgr::update() function to preserve earlier functionality if someone needs it (e.g. usage independent of an fdm or viewer), not to mention there are a few places in flightgear that call it directly that have not been changed to the new interface (and may not need to be). The code has been optimized to avoid duplicate traversals and seems to run generally quite well. Note that there can be a short delay reloading tiles that have been dropped from static views. We could call the tile scheduler on a view switch, but it's not a big deal and at the moment I'd like to get this in so people can try it and comment on it as it is. Everything has been resycned with CVS tonight and I've included the description submitted earlier (below). Best, Jim Changes synced with CVS approx 20:30EDT 2002-05-09 (after this evenings updates). Files: http://www.spiderbark.com/fgfs/viewer-update-20020516.tar.gz or http://www.spiderbark.com/fgfs/viewer-update-20020516.diffs.gz Description: In a nutshell, these patches begin to take what was one value for ground elevation and calculate ground elevation values seperately for the FDM and the viewer (eye position). Several outstanding view related bugs have been fixed. With the introduction of the new viewer code a lot of that Flight Gear code broke related to use of a global variable called "scenery.cur_elev". Therefore the ground_elevation and other associated items (like the current tile bucket) is maintained per FDM instance and per View. Each of these has a "point" or location that can be identified. See changes to FGLocation class and main.cxx. Most of the problems related to the new viewer in terms of sky, ground and runway lights, and tower views are fixed. There are four minor problems remaining. 1) The sun/moon spins when you pan the "lookat" tower view only (view #3). 2) Under stress (esp. magic carpet full speed with max visibility), there is a memory leak in the tile caching that was not introduced with these changes. 3) I have not tested these changes or made corrections to the ADA or External FDM interfaces. 4) The change view function doesn't call the time/light update (not a problem unless a tower is very far away). Details: FDM/flight.cxx, flight.hxx - FGInterface ties to FGAircraftModel so that it's location data can be accessed for runway (ground elevation under aircraft) elevation. FDM/larsim.cxx, larcsim.hxx - gets runway elevation from FGInterface now. Commented out function that is causing a namespace conflict, hasn't been called with recent code anyway. FDM/JSBSim/JSBSim.cxx, YASim/YASim.cxx - gets runway elevation from FGInterface now. Scenery/newcache.cxx, newcache.hxx - changed caching scheme to time based (oldest tiles discard). Scenery/tileentry.cxx, tileentry.hxx - added place to record time, changed rendering to reference viewer altitude in order to fix a problem with ground and runway lights. Scenery/tilemgr.cxx, tilemgr.hxx - Modified update() to accept values for multiple locations. Refresh function added in order to periodically make the tiles current for a non-moving view (like a tower). Main/fg_init.cxx - register event for making tiles current in a non-moving view (like a tower). Main/location.hxx - added support for current ground elevation data. Main/main.cxx - added second tilemgr call for fdm, fixed places where viewer position data was required for correct sky rendering. Main/options.cxx - fixed segfault reported by Curtis when using --view-offset command line parameter. Main/viewer.cxx, viewer.hxx - removed fudging of view position. Fixed numerous bugs that were causing eye and target values to get mixed up.
2002-05-17 17:25:28 +00:00
*/
1999-10-11 23:09:07 +00:00
};
1998-10-17 00:43:58 +00:00
1998-10-17 01:33:52 +00:00
#endif // _LARCSIM_HXX
1998-10-17 00:43:58 +00:00