1999-02-05 21:26:01 +00:00
|
|
|
/*******************************************************************************
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
Header: FGEngine.h
|
|
|
|
Author: Jon S. Berndt
|
|
|
|
Date started: 01/21/99
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
------------- Copyright (C) 1999 Jon S. Berndt (jsb@hal-pc.org) -------------
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
This program is free software; you can redistribute it and/or modify it under
|
|
|
|
the terms of the GNU General Public License as published by the Free Software
|
|
|
|
Foundation; either version 2 of the License, or (at your option) any later
|
|
|
|
version.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
This program is distributed in the hope that it will be useful, but WITHOUT
|
|
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
|
|
|
|
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
|
|
|
|
details.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
|
|
this program; if not, write to the Free Software Foundation, Inc., 59 Temple
|
|
|
|
Place - Suite 330, Boston, MA 02111-1307, USA.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
Further information about the GNU General Public License can also be found on
|
|
|
|
the world wide web at http://www.gnu.org.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
FUNCTIONAL DESCRIPTION
|
|
|
|
--------------------------------------------------------------------------------
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
Based on Flightgear code, which is based on LaRCSim. This class simulates
|
|
|
|
a generic engine.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
HISTORY
|
|
|
|
--------------------------------------------------------------------------------
|
|
|
|
01/21/99 JSB Created
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-11 21:05:34 +00:00
|
|
|
********************************************************************************
|
1999-02-05 21:26:01 +00:00
|
|
|
SENTRY
|
|
|
|
*******************************************************************************/
|
|
|
|
|
|
|
|
#ifndef FGEngine_H
|
|
|
|
#define FGEngine_H
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
INCLUDES
|
|
|
|
*******************************************************************************/
|
|
|
|
|
1999-02-26 22:09:10 +00:00
|
|
|
#ifdef FGFS
|
2000-02-15 03:30:01 +00:00
|
|
|
# include <simgear/compiler.h>
|
1999-02-26 22:09:10 +00:00
|
|
|
# include STL_STRING
|
1999-12-20 20:24:49 +00:00
|
|
|
FG_USING_STD(string);
|
1999-02-26 22:09:10 +00:00
|
|
|
#else
|
|
|
|
# include <string>
|
|
|
|
#endif
|
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
/*******************************************************************************
|
|
|
|
DEFINES
|
|
|
|
*******************************************************************************/
|
|
|
|
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
using std::string;
|
1999-05-08 03:19:08 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
/*******************************************************************************
|
|
|
|
CLASS DECLARATION
|
|
|
|
*******************************************************************************/
|
|
|
|
|
1999-02-11 21:05:34 +00:00
|
|
|
class FGFDMExec;
|
|
|
|
class FGState;
|
|
|
|
class FGAtmosphere;
|
|
|
|
class FGFCS;
|
|
|
|
class FGAircraft;
|
|
|
|
class FGTranslation;
|
|
|
|
class FGRotation;
|
|
|
|
class FGPosition;
|
|
|
|
class FGAuxiliary;
|
|
|
|
class FGOutput;
|
|
|
|
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
class FGEngine {
|
1999-02-05 21:26:01 +00:00
|
|
|
public:
|
1999-02-26 22:09:10 +00:00
|
|
|
FGEngine(FGFDMExec*, string, string, int);
|
1999-02-05 21:26:01 +00:00
|
|
|
~FGEngine(void);
|
|
|
|
|
1999-02-26 22:09:10 +00:00
|
|
|
enum EngineType {etUnknown, etRocket, etPiston, etTurboProp, etTurboJet};
|
|
|
|
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
float GetThrottle(void) { return Throttle; }
|
|
|
|
float GetThrust(void) { return Thrust; }
|
|
|
|
float GetThrottleMin(void) { return MinThrottle; }
|
|
|
|
float GetThrottleMax(void) { return MaxThrottle; }
|
|
|
|
bool GetStarved(void) { return Starved; }
|
|
|
|
bool GetFlameout(void) { return Flameout; }
|
2000-10-02 23:07:30 +00:00
|
|
|
bool GetRunning(void) { return Running; }
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
int GetType(void) { return Type; }
|
|
|
|
string GetName() { return Name; }
|
|
|
|
|
|
|
|
void SetStarved(bool tt) {
|
|
|
|
Starved = tt;
|
|
|
|
}
|
|
|
|
void SetStarved(void) {
|
|
|
|
Starved = true;
|
|
|
|
}
|
2000-10-02 23:07:30 +00:00
|
|
|
|
|
|
|
void SetRunning(bool bb) { Running=bb; }
|
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
float CalcThrust(void);
|
|
|
|
float CalcFuelNeed(void);
|
|
|
|
float CalcOxidizerNeed(void);
|
|
|
|
|
|
|
|
private:
|
1999-02-26 22:09:10 +00:00
|
|
|
string Name;
|
|
|
|
EngineType Type;
|
1999-02-05 21:26:01 +00:00
|
|
|
float X, Y, Z;
|
2000-07-06 21:02:46 +00:00
|
|
|
float EnginePitch;
|
|
|
|
float EngineYaw;
|
1999-02-05 21:26:01 +00:00
|
|
|
float SLThrustMax;
|
|
|
|
float VacThrustMax;
|
|
|
|
float SLFuelFlowMax;
|
|
|
|
float SLOxiFlowMax;
|
|
|
|
float MaxThrottle;
|
|
|
|
float MinThrottle;
|
|
|
|
|
1999-12-20 20:24:49 +00:00
|
|
|
float BrakeHorsePower;
|
|
|
|
float SpeedSlope;
|
|
|
|
float SpeedIntercept;
|
|
|
|
float AltitudeSlope;
|
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
float Thrust;
|
|
|
|
float Throttle;
|
|
|
|
float FuelNeed, OxidizerNeed;
|
|
|
|
bool Starved;
|
|
|
|
bool Flameout;
|
2000-10-02 23:07:30 +00:00
|
|
|
bool Running;
|
1999-02-05 21:26:01 +00:00
|
|
|
float PctPower;
|
1999-02-11 21:05:34 +00:00
|
|
|
int EngineNumber;
|
|
|
|
|
|
|
|
FGFDMExec* FDMExec;
|
|
|
|
FGState* State;
|
|
|
|
FGAtmosphere* Atmosphere;
|
|
|
|
FGFCS* FCS;
|
|
|
|
FGAircraft* Aircraft;
|
|
|
|
FGTranslation* Translation;
|
|
|
|
FGRotation* Rotation;
|
|
|
|
FGPosition* Position;
|
|
|
|
FGAuxiliary* Auxiliary;
|
|
|
|
FGOutput* Output;
|
1999-02-26 22:09:10 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
protected:
|
|
|
|
float CalcRocketThrust(void);
|
|
|
|
float CalcPistonThrust(void);
|
|
|
|
|
|
|
|
};
|
|
|
|
|
|
|
|
/******************************************************************************/
|
1999-02-26 22:09:10 +00:00
|
|
|
#endif
|