#!/bin/bash #* Written by Francesco Angelo Brisa, started January 2008. # # Copyright (C) 2013 Francesco Angelo Brisa # email: fbrisa@gmail.com - fbrisa@yahoo.it # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # Setting up for download_and_compile.sh is documented # on VERSION="1.9-14a" # See change log below # # Changes in 1.9.14a # # fixed distribution detection. # # Changes in 1.9.14 # 1. Version bump for 2.99.9 now 3.0.0 # 2. changed logging to log entire output of a sub-process # rather than write individual lines of output to a logfile. # 3. logs are versioned. # 4. fix to support a change in fgdata version when fgdata is a symlink # 5. Automatic j option # of cores + 1 # 6. fixed stable fgrun build # 7. stable is now 2.12.0 for fgfs & simgear, 2.12.1 for fgdata # 8. fixed broken stable build for 2.12.0 # 9. Added section on setup # 10. once built, unless specifically requested by parameter OSG or PLIB: # Don't rebuild OSG or plib # Don't update OSG or plib sources # 12. self testing with ./download_and_compile.sh test. # # Note: using the self test multiple times can cause problems. Only so much bandwidth is allocated # to you when downloading OSG. Use it up and you will be shut off for a while. As an alternative # provide copies of the OSG sources in the same directory as download_and_compile.sh # the copy should be labeled with the version of OSG it contains. OpenSceneGraph-3.0.1 and OpenSceneGraph-3.2.0 # plib is handled the same way, but only one version of it exists so its just plib. # # the symptom of overuse of svn.openscenegraph.org is: # svn: E175002: OPTIONS of 'http://svn.openscenegraph.org/osg/OpenSceneGraph/tags/OpenSceneGraph-3.0.1': # could not connect to server (http://svn.openscenegraph.org) # # setup and minimal instructions: # see http://wiki.flightgear.org/Scripted_Compilation_on_Linux_Debian/Ubuntu#Cut_to_the_Chase:_for_the_impatient # ####################################################### # THANKS TO ####################################################### # Special thanks to Alessandro Garosi for FGComGui and # other patches # Thanks to "Pat Callahan" for patches for fgrun compilation # Thanks to "F-JJTH" for bug fixes and suggestions # Thanks again to "F-JJTH" for OpenRTI and FGX # Thanks to André, ( taureau89_9 ) for debian stable packages fixes # --------------------------------------------------------- # Script Section: Self Test # --------------------------------------------------------- function self_test_one(){ test_dir="$1$3" test_options_and_parameters="$2" test_sub_dir="$3" mkdir -p ${test_dir}${test_sub_dir} if [[ "$test_sub_dir" != "" ]] then cp -f download_and_compile.sh ${test_dir}/../ fi cd ${test_dir} $test_start_dir/download_and_compile.sh $test_options_and_parameters cd $test_start_dir if [[ -e $test_dir/install/fgfs/bin/fgfs && -e $test_dir/install/fgrun/bin/fgrun ]] then test_dir="$1" touch ${test_dir}_ok ls -lah ${test_dir}/install/fgfs else test_dir="$1" touch ${test_dir}_failed fi echo '----------------------------------------------------------' echo '----------------------------------------------------------' echo '----------------------------------------------------------' echo Finished test build in ${test_dir} echo '----------------------------------------------------------' echo '----------------------------------------------------------' echo '----------------------------------------------------------' } if [[ "$1" = "selftest" || "$1" = "test" ]] then # this takes a LOT of disk space. set -x set -v test_start_dir=$(pwd) pwd ls if [[ "$2" = "reset" ]] then rm -rf b_stable rm -rf b_next rm -rf b_master rm -rf b_3.0.0 rm -rf b_2.12.1 rm -rf b_selftest fi if test -n "$(find . -maxdepth 1 -name 'b_*_ok' -print -quit)" then rm b_*_ok fi if test -n "$(find . -maxdepth 1 -name 'b_*_failed' -print -quit)" then rm b_*_failed fi mkdir -p fgsrc mkdir -p othersrc # fgdata_2.12.0 and fgdata_3.0.0 contain complete copies of fgdata # so multiple versions can be built and then tested. # the fgdata_ directories can exist in ../, ../../ or ../../.. # if you already have an fgdata downloaded for 2.12.0, 2.12.1 or 3.0.0, # you can copy the entire fgdata folder to any empty fgdata_ folder in the # same folder as download_and_compile.sh is being tested from The script will use these # where appropriate. If you choose not to put an fgdata in the fgdata_${version} directories, # fgdata will be downloaded and place there for future use. # mv $path_to_fgdata_2.12/fgdata -R fgdata_2.12.0/ # mv $path_to_fgdata_3.0.0/fgdata -R fgdata_3.0.0/ self_test_one b_stable "-sxvp n" self_test_one b_next "-xvp n -G 3.2.0" self_test_one b_2.12.1 "-xvp n -B release/2.12.1 -G 3.2.0" self_test_one b_3.0.0 "-xvp n -B release/3.0.0 -G 3.2.0" self_test_one b_master "-xvp n -B master -G 3.2.0" self_test_one b_selftest "-xvp n -G 3.2.0" "/selftest/selftest" # note the b_selftest is guaranteed to download everything but OSG and plib. echo "Test Results:" ls -l |grep ' b_*' exit 0 fi # --------------------------------------------------------- # Script Section: Script and Option Initialization # --------------------------------------------------------- function write_log(){ if [[ "$1" = "separator" ]] then echo "" | tee -a download_and_compile_summary.log echo "-----------------------------------------------------------------------------------" \ | tee -a download_and_compile_summary.log echo "" | tee -a download_and_compile_summary.log else echo "$(date) $1"| tee -a download_and_compile_summary.log fi } function write_log_and_exec(){ write_log "$1 $2" $1 } function write_log_and_exec_subprocess(){ write_log "$1 $2" if [[ "$3" = "noerror" ]] then $1 2>/dev/null || true else $1 fi } function git_check_branch_or_tag(){ if [[ "$1" != "" ]] then branch="$(git branch |sed "s/* //" |grep $1)" tag="$(git tag |sed "s/* //" |grep $1)" echo $branch$tag fi } function SET_WINDOW_TITLE(){ echo -ne "\033]0;Build Flightgear: - ${current_build_dir} - $1\007" } function check_build(){ # # which directories have flightgear installations # cd $1 pwd=$(pwd) for fgfs_install_dir in $(find $1 -type d -regex '.*install/fgfs') do write_log; write_log; cd $pwd cd "${fgfs_install_dir}/.." install_dir=$(pwd) exe_fgfs="" exe_fgrun="" exe_fgcom="" exe_fgcomgui="" INSTALL_DIR_FGFS="" install_dir_fgrun="" install_dir_fgcom="" install_dir_fgcomgui="" no_exe_fgfs="" no_exe_fgrun="" no_exe_fgcom="" no_exe_fgcomgui="" no_INSTALL_DIR_FGFS="" no_install_dir_fgrun="" no_install_dir_fgcom="" no_install_dir_fgcomgui="" if [[ -e ${install_dir}/fgfs/bin/fgfs ]] then exe_fgfs="fgfs" else no_exe_fgfs="fgfs" fi if [[ -e "${install_dir}/fgrun/bin/fgrun" ]] then exe_fgrun="fgrun" else no_exe_fgrun="fgrun" fi if [[ -e "${install_dir}/fgfs/bin/fgcom" ]] then exe_fgcom="fgcom" else no_exe_fgcom="fgcom" fi if [[ -e "${install_dir}/fgcomgui/bin/fgcomgui" ]] then exe_fgcomgui="fgcomgui" else no_exe_fgcomgui="fgcomgui" fi if [[ -e ${install_dir}/fgfs ]] then INSTALL_DIR_FGFS="fgfs" else no_INSTALL_DIR_FGFS="fgfs" fi if [[ -e "${install_dir}/fgrun" ]] then install_dir_fgrun="fgrun" else no_install_dir_fgrun="fgrun" fi if [[ -e "${install_dir}/fgfs" ]] then install_dir_fgcom="fgcom" else no_install_dir_fgcom="fgcom" fi if [[ -e "${install_dir}/fgcomgui" ]] then install_dir_fgcomgui="fgcomgui" else no_install_dir_fgcomgui="fgcomgui" fi found_exe="$exe_fgfs $exe_fgrun $exe_fgcom $exe_fgcomgui" no_exe="$no_exe_fgfs $no_exe_fgrun $no_exe_fgcom $no_exe_fgcomgui" found_install_dir="$INSTALL_DIR_FGFS $install_dir_fgrun $install_dir_fgcom $install_dir_fgcomgui" no_install_dir="$no_INSTALL_DIR_FGFS $no_install_dir_fgrun $no_install_dir_fgcom $no_install_dir_fgcomgui" found_exe=${found_exe=## } found_install_dir=${found_install_dir=##} no_exe=${no_exe##} no_install_dir=${no_install_dir##} cd $pwd write_log separator write_log "Install dir: ${install_dir}" write_log separator write_log "Found fgdata: $(cat $install_dir/fgfs/fgdata/version)" write_log "Found Executables: $found_exe" write_log "Found Install Dir: $found_install_dir" write_log "Found No Executables: $no_exe" write_log "Found No Install Dir: $no_install_dir" write_log "" write_log separator write_log separator write_log "" done } set -x if [[ "$DOWNLOAD_AND_COMPILE_LOG" == "" ]] then log_version=0 if test -n "$(find . -maxdepth 1 -name 'download_and_compile.log:*' -print -quit)" then for f in download_and_compile.log:* do log_version_found=$(( 10#${f##*:} )) if [[ $log_version_found -gt $log_version ]] then log_version=$log_version_found fi done fi if [[ -e download_and_compile.log ]] then let log_version=$(( $log_version + 1)) if [[ $log_version -lt 10 ]] then log_version='0'$log_version fi mv download_and_compile.log download_and_compile.log:$log_version fi export DOWNLOAD_AND_COMPILE_LOG=download_and_compile.log bash $0 $* 2>&1 |tee $DOWNLOAD_AND_COMPILE_LOG exit fi rebuild_command="$0 $*" echo $0 $* echo " started building in $(pwd)" echo " at $(date)" LOGSEP="***********************************" UPDATE= STABLE= STOP_AFTER_ONE_MODULE=false APT_GET_UPDATE="y" DOWNLOAD_PACKAGES="y" COMPILE="y" RECONFIGURE="y" DOWNLOAD="y" JOPTION="-j $(( $(nproc) + 1))" OOPTION="" DEBUG="" WITH_EVENT_INPUT="" WITH_OPENRTI="" FGSG_BRANCH="next" FGSG_REVISION="HEAD" osg_version="3.2.0" # --------------------------------------------------------- # Script Section: Option Interpretation # --------------------------------------------------------- SET_WINDOW_TITLE "Script and Option Initialization" while getopts "zsuhgeixvwc:p:a:d:r:j:O:B:R:G:" OPTION do echo $OPTION case $OPTION in s) STABLE="STABLE" FGSG_BRANCH="2.12.1" FGSG_REVISION="HEAD" ;; B) FGSG_BRANCH=$OPTARG ;; R) FGSG_REVISION=$OPTARG ;; G) osg_version=${OPTARG^^} #3.0.1, 3.0.1d 3.1.9 3.1.9d, 3.2.0 next nextd, etc OSG_DEBUG_OR_RELEASE='Release' if [[ ${osg_version%d} != ${osg_version} ]] then OSG_DEBUG_OR_RELEASE='Debug' osg_version= ${osg_version%d} fi ;; u) UPDATE="UPDATE" ;; h) HELP="HELP" ;; a) APT_GET_UPDATE=$OPTARG ;; c) COMPILE=$OPTARG ;; p) DOWNLOAD_PACKAGES=$OPTARG ;; d) DOWNLOAD=$OPTARG ;; r) RECONFIGURE=$OPTARG ;; j) JOPTION=" -j"$OPTARG" " ;; O) OOPTION=" -O"$OPTARG" " ;; g) DEBUG="CXXFLAGS=-g" ;; e) WITH_EVENT_INPUT="--with-eventinput" ;; i) WITH_OPENRTI="-D ENABLE_RTI=ON" ;; x) set -x ;; v) set -v ;; w) VERBOSE_MAKEFILE="-D CMAKE_VERBOSE_MAKEFILE=ON" ;; z) STOP_AFTER_ONE_MODULE=true ;; ?) echo "error" HELP="HELP" #exit ;; esac done opts=$- # --------------------------------------------------------- # Script Section: Set Source Archive Version Variables # --------------------------------------------------------- # Last stable revision: currently FlightGear 2.10.0 with 3.0.1 PLIB_STABLE_REVISION="2172" OSG_SVN="http://svn.openscenegraph.org/osg/OpenSceneGraph/tags/OpenSceneGraph-${osg_version}/" declare -A OPENRTI_MAP declare -A FGSG_MAP declare -A FGRUN_MAP declare -A fgdata_map FGSG_MAP=( [next]="next HEAD" \ [master]="master HEAD " \ [3.0.0]="release/3.0.0 HEAD" \ [2.12.1]="release/2.12.0 HEAD" \ [2.12.0]="release/2.12.0 HEAD" \ [2.10.0]="release/2.10.0 HEAD " \ [2.8.0]="release/2.8.0 version/2.8.0-final" ) FGRUN_MAP=( [next]="next HEAD" \ [master]="master HEAD " \ [3.0.0]="release/3.0.0 HEAD " \ [2.12.1]="release/2.12 HEAD" \ [2.12.0]="release/2.12 HEAD" \ [2.10.0]="release/2.12 HEAD " \ [2.8.0]="release/2.12 HEAD" ) fgdata_map=([next]="master HEAD 3.0.0" \ [master]="master HEAD 3.0.0" \ [3.0.0]="release/3.0.0 HEAD 3.0.0" \ [2.12.1]="release/2.12.0 HEAD 2.12.1 " \ [2.12.0]="release/2.12.0 HEAD 2.12.1" \ [2.10.0]="release/2.10.0 HEAD 2.10.0" \ [2.8.0]="release/2.8.0 HEAD 2.8.0" ) OPENRTI_MAP=( [next]="master HEAD" \ [master]="master HEAD" \ [2.12.1]="master HEAD" \ [2.12.0]="master HEAD" \ [2.10.0]="master HEAD" \ [2.8.0]="release-0.3 OpenRTI-0.3.0" ) FG_SG_VERSION=${FGSG_BRANCH##*/} MAP_ITEM=( ${FGSG_MAP[${FG_SG_VERSION}]} ) FGSG_BRANCH=${MAP_ITEM[0]} FGSG_REVISION=${MAP_ITEM[1]} MAP_ITEM=( ${FGRUN_MAP[${FG_SG_VERSION}]} ) FGRUN_BRANCH=${MAP_ITEM[0]} FGRUN_REVISION=${MAP_ITEM[1]} MAP_ITEM=( ${fgdata_map[${FG_SG_VERSION}]} ) fgdata_branch=${MAP_ITEM[0]} fgdata_revision=${MAP_ITEM[1]} fgdata_version=${MAP_ITEM[2]} MAP_ITEM=( ${OPENRTI_MAP[${FG_SG_VERSION}]} ) OPENRTI_BRANCH=${MAP_ITEM[0]} OPENRTI_REVISION=${MAP_ITEM[1]} # FGCOMGUI FGCOMGUI_STABLE_REVISION="46" #OpenRadar OR_STABLE_RELEASE="http://wagnerw.de/OpenRadar.zip" fgdata_git="git://gitorious.org/fg/fgdata.git" echo $(pwd) # --------------------------------------------------------- # Script Section: Display Script Help # --------------------------------------------------------- set +x if [ "$HELP" = "HELP" ] then echo "$0 Version $VERSION" echo "Usage:" echo "./$0 [-u] [-h] [-s] [-e] [-i] [-g] [-a y|n] [-c y|n] [-p y|n] [-d y|n] [-r y|n] [ALL|PLIB|OSG|OPENRTI|SIMGEAR|FGFS|FGO|FGX|FGRUN|FGCOMGUI|ATLAS] [UPDATE]" echo "* without options it recompiles: PLIB,OSG,OPENRTI,SIMGEAR,FGFS,FGRUN" echo "* Using ALL compiles everything" echo "* Adding UPDATE it does not rebuild all (faster but to use only after one successfull first compile)" echo "Switches:" echo "* -u such as using UPDATE" echo "* -h show this help" echo "* -e compile FlightGear with --with-eventinput option (experimental)" echo "* -i compile SimGear and FlightGear with -D ENABLE_RTI=ON option (experimental)" echo "* -g compile with debug info for gcc" echo "* -a y|n y=do an apt-get update n=skip apt-get update default=y" echo "* -p y|n y=download packages n=skip download packages default=y" echo "* -c y|n y=compile programs n=do not compile programs default=y" echo "* -d y|n y=fetch programs from internet (cvs, svn, etc...) n=do not fetch default=y" echo "* -j X Add -jX to the make compilation default=None" echo "* -O X Add -OX to the make compilation default=None" echo "* -r y|n y=reconfigure programs before compiling them n=do not reconfigure default=y" echo "* -s compile only last stable known versions default=y" echo "* -w cmake verbose option" echo "* -x set -x bash option" echo "* -v set -v bash option" echo "* -B branch" echo "* -R revision" echo "* -G osg version" exit fi # -------------------------------------------- # Warning about compilation time and size # Idea from Jester echo "**************************************" echo "* *" echo "* Warning, the compilation process *" echo "* is going to use 12 or more Gbytes *" echo "* of space and at least a couple of *" echo "* hours to download and build FG. *" echo "* *" echo "* Please, be patient ...... *" echo "* *" echo "**************************************" # --------------------------------------------------------- # Script Section: Debian Backports # --------------------------------------------------------- # Debian 4.0rX (Etch) backports.org # From D-HUND ISSUE=$(cat /etc/issue) # Uncomment following line to confirm backports.org is in sources.list: #ISSUE="" if [ "$ISSUE" = "Debian GNU/Linux 4.0 \n \l" ]; then clear echo "*****************************************************" echo "* Note to users of Debian Etch (Stable 4.0rX) *" echo "*****************************************************" echo echo "Since autumn 2008 it is not possible anymore to easily install fgfs" echo "cvs by using standard repositry. Therefore it is necessary to have" echo "backports.org in the apt sources.list to run this script." echo echo "If you're using synaptic you may follow these steps:" echo " - Open synaptics menu 'Settings' --> 'Repositories'" echo " - Click 'Add' and do" echo " select 'Binaries (deb)'" echo " enter Address: 'www.backports.org/backports.org/'" echo " enter Distribution: 'etch-backports'" echo " enter Section(s): 'main contrib non-free'" echo " - Close Repositries window using 'OK'" echo " - Click 'Reload' to update database." echo echo "If you have backports.org in your apt-repositries and want to get" echo "rid of this message have a look at the script." echo -n "[c] to continue or just [ENTER] to exit script: " if [ "$(read GOON)" != "c" ]; then echo "Script aborted!" exit 0 fi fi # --------------------------------------------------------- # Script Section: Display Options Chosen # --------------------------------------------------------- echo $0 $* echo "APT_GET_UPDATE=$APT_GET_UPDATE" echo "DOWNLOAD_PACKAGES=$DOWNLOAD_PACKAGES" echo "COMPILE=$COMPILE" echo "RECONFIGURE=$RECONFIGURE" echo "DOWNLOAD=$DOWNLOAD" echo "JOPTION=$JOPTION" echo "OOPTION=$OOPTION" echo "DEBUG=$DEBUG" echo "FGSG_VERSION=$FGSG_VERSION" echo "FGSG_REVISION=$FGSG_REVISION" echo "fgdata_branch=$fgdata_branch" echo "fgdata_revision=$fgdata_revision" echo "fgdata_version=$fgdata_version" echo "$LOGSEP" set -$opts # --------------------------------------------------------- # Script Section: Determine Linux Distribution # --------------------------------------------------------- if [ -e /etc/lsb-release ] then . /etc/lsb-release fi # default is hardy DISTRO_PACKAGES="libopenal-dev libalut-dev libalut0 cvs subversion cmake make build-essential automake zlib1g-dev zlib1g libwxgtk2.8-0 libwxgtk2.8-dev fluid gawk gettext libxi-dev libxi6 libxmu-dev libxmu6 libboost-dev libasound2-dev libasound2 libpng12-dev libpng12-0 libjasper1 libjasper-dev libopenexr-dev libboost-serialization-dev git-core libqt4-dev scons python-tk python-imaging-tk libsvn-dev libglew1.5-dev libxft2 libxft-dev libxinerama1 libxinerama-dev" UBUNTU_PACKAGES="freeglut3-dev libjpeg62-dev libjpeg62 libapr1-dev libfltk1.3-dev libfltk1.3" if [[ ( "$DISTRIB_ID" = "Ubuntu" || "$DISTRIB_ID" = "LinuxMint" ) && "$DISTRIB_RELEASE" < "13.10" ]] then UBUNTU_PACKAGES="$UBUNTU_PACKAGES libhal-dev" fi DEBIAN_PACKAGES_STABLE="freeglut3-dev libjpeg8-dev libjpeg8 libfltk1.1-dev libfltk1.1" DEBIAN_PACKAGES_TESTING="freeglut3-dev libjpeg8-dev libjpeg8 libfltk1.3-dev libfltk1.3" DEBIAN_PACKAGES_UNSTABLE="freeglut3-dev libjpeg8-dev libjpeg8 libfltk1.3-dev libfltk1.3" if [ "$DISTRIB_ID" = "Ubuntu" -o "$DISTRIB_ID" = "LinuxMint" ] then echo "$DISTRIB_ID $DISTRIB_RELEASE" DISTRO_PACKAGES="$DISTRO_PACKAGES $UBUNTU_PACKAGES" else echo "DEBIAN I SUPPOUSE" DEBIAN_PACKAGES=$DEBIAN_PACKAGES_STABLE if [ ! "$(apt-cache search libfltk1.3)" = "" ] then #TESTING MAYBE DEBIAN_PACKAGES=$DEBIAN_PACKAGES_TESTING fi DISTRO_PACKAGES="$DISTRO_PACKAGES $DEBIAN_PACKAGES" fi echo "$LOGSEP" # --------------------------------------------------------- # Script Section: Install Prerequisite Development Packages # --------------------------------------------------------- SET_WINDOW_TITLE "Install Prerequisite Development Packages" if [ "$DOWNLOAD_PACKAGES" = "y" ] then echo -n "PACKAGE INSTALLATION ... " LIBOPENALPACKAGE=$(apt-cache search libopenal | grep "libopenal. " | sed s/\ .*//) DISTRO_PACKAGES=$DISTRO_PACKAGES" "$LIBOPENALPACKAGE # checking linux distro and version to differ needed packages if [ "$DISTRIB_ID" = "Ubuntu" ] then if [ "$APT_GET_UPDATE" = "y" ] then echo "Asking your password to perform an apt-get update" sudo apt-get update fi echo "Asking your password to perform an apt-get install ... " sudo apt-get install $DISTRO_PACKAGES else # WE ARE USING DEBIAN if [ "$APT_GET_UPDATE" = "y" ] then echo "Asking root password to perform an apt-get update" su -c "apt-get update" fi echo "Asking root password to perform an apt-get install ... " su -c "apt-get install $DISTRO_PACKAGES" fi echo " OK" fi # ------------------------------------------------------------- # Script Section: Create Required Build and install Directories # ------------------------------------------------------------- SET_WINDOW_TITLE "Create Required Build and install Directories" COMPILE_BASE_DIR=. #cd into compile base directory cd "$COMPILE_BASE_DIR" #get absolute path current_build_dir=$(pwd) current_build_dir=$(pwd) # ---------------------------------------------------------------------------------------- # Special handling for plib and OpenSceneGraph # # These container, src, install and build directories support # doing a single download, configure and build for osg versions and plib-1.8.5 # This means that src, build and install directories for OSG can be separate from # the build and install directories for openrti, simgear, flightgear, fgrun and fgcom # this is optional and is conditioned on the existence of certain directories in the parent # of where you are building. The scheme supports as many osg versions as you care to download. # it should also support debug versions of the osg libraries, but this has not been tried yet. # care to build. # handling plib and OSG in this way will save # time # network bandwidth # disk space # # To trigger this option, two things are required: # 1. create a folder othersrc in the directory containing download_and_compile.sh # 2. always build in a subdirectory of the one containing download_and_compile.sh # # Directory Scheme: # download_and_compile.sh # othersrc # plib-1.8.5 # plib # osg${osg_version1} # osg${osg_version2} # install # plib # osg${osg_version} # build # plib # osg${osg_version1} # next # master # stable # 2.12.0 # 3.0.0 # to build, cd into one of next, master, stable, 2.12.0 or 3.0.0 # and run ../download_and_compile.sh with appropriate parameters. # first the defaults plib_src_container=$current_build_dir osg_src_container=$current_build_dir install_dir_osg= # then override with the optional scheme for othersrc if [[ -e ../othersrc ]] then mkdir -p ../othersrc/plib-1.8.5 mkdir -p ../build/plib mkdir -p ../install/plib plib_src_container=$(cd ../othersrc/plib-1.8.5; pwd;) build_dir_plib=$(cd ../build/plib; pwd;) install_dir_plib=$(cd ../install/plib; pwd;) mkdir -p ../othersrc/OpensceneGraph-${osg_version} mkdir -p ../build/osg-${osg_version} mkdir -p ../install/osg-${osg_version} osg_src_container=$(cd ../othersrc/OpensceneGraph-${osg_version}; pwd;) install_dir_osg=$(cd ../install/osg-${osg_version}; pwd;) build_dir_osg=$(cd ../build/osg-${osg_version}; pwd;) fi if [[ "${install_dir_osg}" = "" ]] then mkdir -p build/plib mkdir -p install/plib mkdir -p build/osg mkdir -p install/osg install_dir_osg=$(cd build/plib; pwd;) install_dir_plib=$(cd install/plib; pwd;) build_dir_osg=$(cd build/osg; pwd;) build_dir_plib=$(cd install/osg; pwd;) fi # set it all up ahead of time: mkdir -p ${plib_src_container} mkdir -p ${osg_src_container} mkdir -p ${install_dir_osg} mkdir -p ${install_dir_plib} mkdir -p ${build_dir_osg} mkdir -p ${build_dir_plib} plib_src=$plib_src_container/plib osg_src=$osg_src_container/OpenSceneGraph # --------------------------------------------------------- # Script Section: Build Argument Interpretation # --------------------------------------------------------- #SET_WINDOW_TITLE "Option Interpretation" shift $(($OPTIND - 1)) WHATTOBUILD= # supress build of plib and osg if the libraries are in place if [[ ! -e ${install_dir_plib}/lib/libplibsg.a ]] then build_plib=PLIB fi if [[ ! -e ${install_dir_osg}/lib/libosgWidget.so.${osg_version} ]] then build_osg=OSG fi WHATTOBUILDALL=( $build_plib $build_osg OPENRTI SIMGEAR FGFS DATA FGRUN ) #printf "Remaining arguments are: %s\n" "$*" #printf "Num: %d\n" "$#" if [ ! "$#" = "0" ] then for arg in $* do #echo "$arg" if [ "${arg^^}" == "UPDATE" ] then UPDATE="UPDATE" else WHATTOBUILD=( "${WHATTOBUILD[@]}" "${arg^^}" ) fi done else WHATTOBUILD=( "${WHATTOBUILDALL[@]}" ) fi if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="ALL"' ]] then WHATTOBUILD=( "${WHATTOBUILDALL[@]}" ) fi # # printf "%s\n" "${WHATTOBUILD[@]}" echo "DIRECTORY= $current_build_dir" echo "$LOGSEP" mkdir -p install SUB_INSTALL_DIR=install INSTALL_DIR=$current_build_dir/$SUB_INSTALL_DIR cd "$current_build_dir" mkdir -p build # --------------------------------------------------------- # Script Section: set script to stop if an error occours # --------------------------------------------------------- set -e # --------------------------------------------------------- # Script Section: Build Components # --------------------------------------------------------- ####################################################### # PLIB ####################################################### export INSTALL_DIR_PLIB=${install_dir_plib} if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="PLIB"' ]] then if [ ! "$UPDATE" = "UPDATE" ] then set +x echo "****************************************" echo "**************** PLIB ******************" echo "****************************************" SET_WINDOW_TITLE "Building PLIB" echo "BUILDING PLIB" echo "plib_src_container:$plib_src_container" echo "plib_src: $install_dir_plib" echo "install_dir_plib: $install_dir_plib" set -$opts if [ "$DOWNLOAD" = "y" ] then if [ -d "${plib_src_dir}/.svn" ] then echo -n "updating plib svn" cd ${plib_src} svn update else echo -n "DOWNLOADING FROM http://svn.code.sf.net/p/plib/code/trunk/ ..." cd ${plib_src_container} svn co http://svn.code.sf.net/p/plib/code/trunk/ plib echo " OK" fi fi if [ "$RECONFIGURE" = "y" ] then cd ${plib_src} echo "AUTOGEN plib" ./autogen.sh echo "CONFIGURING plib" cd ${build_dir_plib} ${plib_src}/configure --disable-pw --disable-sl --disable-psl --disable-ssg --disable-ssgaux --prefix="$INSTALL_DIR_PLIB" --exec-prefix="$INSTALL_DIR_PLIB" echo "CONFIGURE/RECONFIGURE OSG DONE." else echo "NO RECONFIGURE FOR plib" fi if [ "$COMPILE" = "y" ] then echo "MAKE plib" echo "make $JOPTION $OOPTION" cd $build_dir_plib make $JOPTION $OOPTION echo "INSTALL plib" echo "make install" make install fi fi if [[ $STOP_AFTER_ONE_MODULE = true ]]; then exit; fi fi ####################################################### # OpenSceneGraph ####################################################### SET_WINDOW_TITLE "Building OpenSceneGraph" export INSTALL_DIR_OSG=${install_dir_osg} if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="OSG"' ]] then set +x echo "****************************************" echo "**************** OSG *******************" echo "****************************************" echo "BUILDING PLIB" echo "osg_src_container:$osg_src_container" echo "osg_src: $install_dir_osg" echo "install_dir_osg: $install_dir_osg" set -$opts if [ "$DOWNLOAD" = "y" ] then echo -n "SVN FROM $OSG_SVN ... " if [ -d "${osg_src}/.svn" ] then echo -n "updating OpenSceneGraph svn" cd ${osg_src} svn update else echo -n "downloadING FROM $OSG_SVN ..." cd $osg_src_container svn co "$OSG_SVN" OpenSceneGraph fi fi if [ ! "$UPDATE" = "UPDATE" ] then if [ "$RECONFIGURE" = "y" ] then cd ${build_dir_osg} echo -n "RECONFIGURE OSG ... " rm -f CMakeCache.txt ${osg_src}/CMakeCache.txt CMakeCache.txt cmake ${osg_src} cmake ${VERBOSE_MAKEFILE} -D CMAKE_BUILD_TYPE="Release" -D CMAKE_CXX_FLAGS="-O3 -D__STDC_CONSTANT_MACROS" -D CMAKE_C_FLAGS="-O3" -D CMAKE_INSTALL_PREFIX:PATH="$INSTALL_DIR_OSG" $osg_src echo "RECONFIGURE OSG DONE." fi fi if [ "$COMPILE" = "y" ] then echo "COMPILING OSG" cd ${build_dir_osg} make $JOPTION $OOPTION echo "INSTALLING OSG" make install fi #FIX FOR 64 BIT COMPILATION if [ -d "$INSTALL_DIR_OSG/lib64" ] then if [ -L "$INSTALL_DIR_OSG/lib" ] then echo "link already done" else ln -s "$INSTALL_DIR_OSG/lib64" "$INSTALL_DIR_OSG/lib" fi fi if [[ $STOP_AFTER_ONE_MODULE = true ]]; then exit; fi fi ####################################################### # OPENRTI ####################################################### SET_WINDOW_TITLE "Building OPENRTI" OPENRTI_INSTALL_DIR=openrti INSTALL_DIR_OPENRTI=$INSTALL_DIR/$OPENRTI_INSTALL_DIR cd "$current_build_dir" if [ ! -d "openrti" ] then mkdir "openrti" fi if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="OPENRTI"' ]] then echo "****************************************" echo "**************** OPENRTI ***************" echo "****************************************" if [ "$DOWNLOAD" = "y" ] then cd openrti echo -n "git FROM git://gitorious.org/openrti/openrti.git ... " if [ -d "openrti" ] then echo "openrti exists already." else git clone git://gitorious.org/openrti/openrti.git fi cd openrti git fetch origin if [ "$STABLE" = "STABLE" ] then # switch to stable branch # create local stable branch, ignore errors if it exists git branch -f $OPENRTI_BRANCH origin/$OPENRTI_BRANCH 2> /dev/null || true # switch to stable branch. No error is reported if we're already on the branch. git checkout -f $OPENRTI_BRANCH # get indicated stable version git reset --hard $OPENRTI_REVISION else # switch to unstable branch # create local unstable branch, ignore errors if it exists git branch -f $OPENRTI_BRANCH origin/$OPENRTI_BRANCH 2> /dev/null || true # switch to unstable branch. No error is reported if we're already on the branch. git checkout -f $OPENRTI_BRANCH # pull latest version from the unstable branch git pull fi cd .. echo " OK" cd .. fi cd "openrti/openrti" if [ ! "$UPDATE" = "UPDATE" ] then if [ "$RECONFIGURE" = "y" ] then cd "$current_build_dir" mkdir -p build/openrti cd "$current_build_dir"/build/openrti echo -n "RECONFIGURE OPENRTI ... " rm -f ../../openrti/openrti/CMakeCache.txt cmake ${VERBOSE_MAKEFILE} -D CMAKE_BUILD_TYPE="Release" -D CMAKE_CXX_FLAGS="-O3 -D__STDC_CONSTANT_MACROS" -D CMAKE_INSTALL_PREFIX:PATH="$INSTALL_DIR_OPENRTI" ../../openrti/openrti/ echo " OK" fi fi if [ "$COMPILE" = "y" ] then cd "$current_build_dir"/build/openrti echo "MAKE OPENRTI" echo "make $JOPTION $OOPTION " make $JOPTION $OOPTION echo "INSTALL OPENRTI" make install fi cd - if [[ $STOP_AFTER_ONE_MODULE = true ]]; then exit; fi fi ####################################################### # SIMGEAR ####################################################### SET_WINDOW_TITLE "Building Simgear" SIMGEAR_INSTALL_DIR=simgear INSTALL_DIR_SIMGEAR=$INSTALL_DIR/$SIMGEAR_INSTALL_DIR cd "$current_build_dir" if [ ! -d "simgear" ] then mkdir "simgear" fi if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="SIMGEAR"' ]] then echo "****************************************" echo "**************** SIMGEAR ***************" echo "****************************************" if [ "$DOWNLOAD" = "y" ] then cd simgear echo -n "git FROM git://gitorious.org/fg/simgear.git ... " if [ -d "simgear" ] then echo "simgear exists already." else git clone git://gitorious.org/fg/simgear.git fi cd simgear git fetch origin if [ "$STABLE" = "STABLE" ] then # switch to stable branch # create local stable branch, ignore errors if it exists git branch -f $FGSG_BRANCH origin/$FGSG_BRANCH 2> /dev/null || true # switch to stable branch. No error is reported if we're already on the branch. git checkout -f $FGSG_BRANCH # get indicated stable version git reset --hard $SIMGEAR_STABLE_REVISION else # switch to unstable branch # create local unstable branch, ignore errors if it exists git branch -f $FGSG_BRANCH origin/$FGSG_BRANCH 2> /dev/null || true # switch to unstable branch. No error is reported if we're already on the branch. git checkout -f $FGSG_BRANCH # pull latest version from the unstable branch git pull fi cd .. echo " OK" cd .. fi cd "simgear/simgear" if [ ! "$UPDATE" = "UPDATE" ] then if [ "$RECONFIGURE" = "y" ] then cd "$current_build_dir" mkdir -p build/simgear cd "$current_build_dir"/build/simgear echo -n "RECONFIGURE SIMGEAR ... " rm -f ../../simgear/simgear/CMakeCache.txt rm -f CMakeCache.txt cmake ${VERBOSE_MAKEFILE} -D CMAKE_BUILD_TYPE="Release" $WITH_OPENRTI -D CMAKE_CXX_FLAGS="-O3 -D__STDC_CONSTANT_MACROS" -D CMAKE_C_FLAGS="-O3" -D CMAKE_INSTALL_PREFIX:PATH="$INSTALL_DIR_SIMGEAR" -D "CMAKE_PREFIX_PATH=$INSTALL_DIR_OSG;$INSTALL_DIR_OPENRTI" ../../simgear/simgear/ echo " OK" fi fi if [ "$COMPILE" = "y" ] then cd "$current_build_dir"/build/simgear echo "MAKE SIMGEAR" echo "make $JOPTION $OOPTION " make $JOPTION $OOPTION echo "INSTALL SIMGEAR" make install fi cd - if [[ $STOP_AFTER_ONE_MODULE = true ]]; then exit; fi fi ####################################################### # FGFS ####################################################### SET_WINDOW_TITLE "Building Flightgear" FGFS_INSTALL_DIR=fgfs INSTALL_DIR_FGFS=$INSTALL_DIR/$FGFS_INSTALL_DIR cd "$current_build_dir" if [ ! -d "fgfs" ] then mkdir "fgfs" fi #if [ "$WHATTOBUILD" = "" -o "$WHATTOBUILD" = "FGFS" -o "$WHATTOBUILD" = "DATA" -o "$WHATTOBUILD" = "ALL" ] if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="FGFS"' || "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="DATA"' ]] then echo "****************************************" echo "**************** FGFS ******************" echo "****************************************" cd fgfs if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="FGFS"' ]] then if [ "$DOWNLOAD" = "y" ] then echo -n "GIT FROM git://gitorious.org/fg/flightgear.git ... " if [ -d "flightgear" ] then echo "flightgear exists already." else git clone git://gitorious.org/fg/flightgear.git fi cd flightgear # fix for CMakeLists.txt broken by fltk issues on Ubuntu 13.10 git fetch origin if [ "$STABLE" = "STABLE" ] then # switch to stable branch # create local stable branch, ignore errors if it exists git branch -f $FGSG_BRANCH origin/$FGSG_BRANCH 2> /dev/null || true # switch to stable branch. No error is reported if we're already on the branch. git checkout -f $FGSG_BRANCH # get indicated stable version git reset --hard $FGFS_STABLE_REVISION else # switch to unstable branch # create local unstable branch, ignore errors if it exists git branch -f $FGSG_BRANCH origin/$FGSG_BRANCH 2> /dev/null || true # switch to unstable branch. No error is reported if we're already on the branch. git checkout -f $FGSG_BRANCH # pull latest version from the unstable branch git pull fi cd .. echo " OK" fi cd flightgear if [[ "$STABLE" = "STABLE" && $(grep -L 'list(APPEND FLTK_LIBRARIES ${CMAKE_DL_LIBS})' CMakeLists.txt) != "" ]] then patch CMakeLists.txt <<\EOF --- fgfs/flightgear/CMakeLists.txt_old 2013-08-04 08:59:00.614104454 -0400 +++ fgfs/flightgear/CMakeLists.txt_new 2013-08-04 09:03:32.430104979 -0400 @@ -203,6 +203,10 @@ list(APPEND FLTK_LIBRARIES ${X11_Xft_LIB}) endif() + if ( CMAKE_DL_LIBS ) + list(APPEND FLTK_LIBRARIES ${CMAKE_DL_LIBS}) + endif() + message(STATUS "Using FLTK_LIBRARIES for fgadmin: ${FLTK_LIBRARIES}") endif ( FLTK_FOUND ) endif(ENABLE_FGADMIN) EOF fi if [ ! "$UPDATE" = "UPDATE" ] then if [ "$RECONFIGURE" = "y" ] then cd "$current_build_dir" mkdir -p build/fgfs cd "$current_build_dir"/build/fgfs echo -n "RECONFIGURE FGFS ... " rm -f ../../fgfs/flightgear/CMakeCache.txt rm -f CMakeCache.txt # REMOVING BAD LINES IN CMakeLists.txt #echo "REMOVING BAD LINES IN CMakeLists.txt" #cat utils/fgadmin/src/CMakeLists.txt | sed /X11_Xft_LIB/d | sed /X11_Xinerama_LIB/d > utils/fgadmin/src/CMakeLists_without_err.txt #cp -f utils/fgadmin/src/CMakeLists_without_err.txt utils/fgadmin/src/CMakeLists.txt cmake ${VERBOSE_MAKEFILE} -D CMAKE_BUILD_TYPE="Release" $WITH_OPENRTI -D "WITH_FGPANEL=OFF" -D CMAKE_CXX_FLAGS="-O3 -D__STDC_CONSTANT_MACROS" -D CMAKE_C_FLAGS="-O3" -D CMAKE_INSTALL_PREFIX:PATH="$INSTALL_DIR_FGFS" -D "CMAKE_PREFIX_PATH=$INSTALL_DIR_OSG;$INSTALL_DIR_PLIB;$INSTALL_DIR_SIMGEAR;$INSTALL_DIR_OPENRTI" ../../fgfs/flightgear echo " OK" fi fi if [ "$COMPILE" = "y" ] then cd "$current_build_dir" mkdir -p build/fgfs cd "$current_build_dir"/build/fgfs echo "MAKE FGFS" echo "make $JOPTION $OOPTION" make $JOPTION $OOPTION echo "INSTALL FGFS" make install fi fi # # Use a scheme similar to the one for osg and plib for fgdata # #fgdata-2.12.1 # fgdata #fgdata-3.0.0 # fgdata if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="DATA"' ]] then if [ ! "$UPDATE" = "UPDATE" ] then if [ "$DOWNLOAD" = "y" ] then cd $current_build_dir fgdata_container= echo "fgdata_version: ${fgdata_version}" for f in ../../../fgdata[-_]${fgdata_version} \ ../../fgdata[-_]${fgdata_version} \ ../fgdata[-_]${fgdata_version} \ ./fgdata[-_]${fgdata_version} do if [[ -e $f ]] then echo checking $f fgdata_container=$(cd ${f}; pwd;) fgdata_directory=$fgdata_container/fgdata if [[ -L $INSTALL_DIR_FGFS/fgdata ]] then rm $INSTALL_DIR_FGFS/fgdata fi if [[ -d $INSTALL_DIR_FGFS/fgdata ]] then rm -rf $INSTALL_DIR_FGFS/fgdata fi ln -s -T $fgdata_directory $INSTALL_DIR_FGFS/fgdata echo "$INSTALL_DIR_FGFS/fgdata is a symbolic link" echo "It points to $(readlink -f $INSTALL_DIR_FGFS/fgdata)" fi done if [[ "$fgdata_container" = "" ]] then fgdata_container=$(cd $INSTALL_DIR_FGFS; pwd;) fgdata_directory=${f}/fgdata if [[ -e $INSTALL_DIR_FGFS/fgdata ]] then echo "$fgdata_directory is a directory" echo "fgdata has been downloaded" fi fi if [[ -e $INSTALL_DIR_FGFS/fgdata ]] then echo "fgdata version $fgdata_version has been downloaded" else echo "fgdata version $fgdata_version will be downloaded." fi SET_WINDOW_TITLE " FGDATA" EXDIR=$(pwd) cd $INSTALL_DIR_FGFS echo "GIT DATA FROM $fgdata_git ... " if [ ! -e "fgdata" ] then # no repository yet - need to clone a fresh one git clone $fgdata_git fgdata fi cd $INSTALL_DIR_FGFS/fgdata git remote set-url origin $fgdata_git git fetch origin if [ "$STABLE" = "STABLE" ] then # switch to stable branch # create local stable branch, ignore errors if it exists if [[ "$(git_check_branch_or_tag $fgdata_branch)" = "" ]] then write_log_and_exec \ "git branch -f $fgdata_branch origin/$fgdata_branch" fi # switch to stable branch. No error is reported if we're already on the branch. write_log_and_exec "git checkout -f $fgdata_branch" # get indicated stable version write_log_and_exec "git reset --hard $fgdata_branch" else # switch to unstable branch # create local unstable branch, ignore errors if it exists $(git_check_branch_or_tag) if [[ "$(git_check_branch_or_tag $fgdata_branch)" = "" ]] then write_log_and_exec \ "git branch -f $fgdata_branch origin/$fgdata_branch" fi # switch to unstable branch. No error is reported if we're already on the branch. write_log_and_exec "git checkout -f $fgdata_branch" # pull latest version from the unstable branch write_log_and_exec "git pull" fi fi fi fi cd "$current_build_dir" # IF SEPARATED FOLDER FOR AIRCRAFTS # --fg-aircraft=\$PWD/../aircrafts cat > run_fgfs.sh << ENDOFALL #!/bin/sh cd \$(dirname \$0) cd $SUB_INSTALL_DIR/$FGFS_INSTALL_DIR/bin export LD_LIBRARY_PATH=$install_dir_plib/lib:$install_dir_osg/lib:../../$SIMGEAR_INSTALL_DIR/lib:../../$OPENRTI_INSTALL_DIR/lib ./fgfs --fg-root=\$PWD/../fgdata/ \$@ ENDOFALL chmod 755 run_fgfs.sh cat > run_fgfs_debug.sh << ENDOFALL2 #!/bin/sh cd \$(dirname \$0) P1=\$PWD cd $SUB_INSTALL_DIR/$FGFS_INSTALL_DIR/bin export LD_LIBRARY_PATH=$install_dir_plib/lib:$install_dir_osg/lib:../../$SIMGEAR_INSTALL_DIR/lib:../../$OPENRTI_INSTALL_DIR/lib gdb --directory="\$P1"/fgfs/source/src/ --args fgfs --fg-root=\$PWD/../fgdata/ \$@ ENDOFALL2 chmod 755 run_fgfs_debug.sh SCRIPT=run_terrasync.sh echo "#!/bin/sh" > $SCRIPT echo "cd \$(dirname \$0)" >> $SCRIPT echo "cd $SUB_INSTALL_DIR/$FGFS_INSTALL_DIR/bin" >> $SCRIPT echo "export LD_LIBRARY_PATH=$install_dir_plib/lib:$install_dir_osg/lib:../../$SIMGEAR_INSTALL_DIR/lib" >> $SCRIPT echo "./terrasync \$@" >> $SCRIPT chmod 755 $SCRIPT SCRIPT=run_fgcom.sh echo "#!/bin/sh" > $SCRIPT echo "cd \$(dirname \$0)" >> $SCRIPT echo "cd $SUB_INSTALL_DIR/$FGFS_INSTALL_DIR/bin" >> $SCRIPT echo "export LD_LIBRARY_PATH=$install_dir_plib/lib:$install_dir_osg/lib:../../$SIMGEAR_INSTALL_DIR/lib" >> $SCRIPT echo "./fgcom \$@" >> $SCRIPT chmod 755 $SCRIPT if [[ $STOP_AFTER_ONE_MODULE = true ]]; then exit; fi fi ####################################################### # FGO! ####################################################### SET_WINDOW_TITLE "Building FGO" FGO_INSTALL_DIR=fgo INSTALL_DIR_FGO=$INSTALL_DIR/$FGO_INSTALL_DIR cd "$current_build_dir" if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="FGO"' ]] then echo "****************************************" echo "***************** FGO ******************" echo "****************************************" if [ "$DOWNLOAD" = "y" ] then wget http://sites.google.com/site/erobosprojects/flightgear/add-ons/fgo/download/fgo-1-3-1.tar.gz?attredirects=0 -O fgo-1-3-1.tar.gz cd install tar zxvf ../fgo-1-3-1.tar.gz cat fgo/src/gui.py | sed s/"self.process = subprocess.Popen".*/"self.process = subprocess.Popen(self.options, cwd=self.FG_working_dir,env=os.environ)"/g > fgo/src/gui.py-new mv fgo/src/gui.py-new fgo/src/gui.py cd .. fi SCRIPT=run_fgo.sh echo "#!/bin/sh" > $SCRIPT echo "cd \$(dirname \$0)" >> $SCRIPT echo "cd $SUB_INSTALL_DIR" >> $SCRIPT echo "p=\$(pwd)" >> $SCRIPT echo "cd $FGO_INSTALL_DIR" >> $SCRIPT echo "export LD_LIBRARY_PATH=\$p/plib/lib:\$p/OpenSceneGraph/lib:\$p/simgear/lib" >> $SCRIPT echo "python fgo" >> $SCRIPT chmod 755 $SCRIPT if [[ $STOP_AFTER_ONE_MODULE = true ]]; then exit; fi fi ####################################################### # FGx ####################################################### SET_WINDOW_TITLE "Building FGX" FGX_INSTALL_DIR=fgx INSTALL_DIR_FGX=$INSTALL_DIR/$FGX_INSTALL_DIR cd "$current_build_dir" if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="FGX"' ]] then echo "****************************************" echo "***************** FGX ******************" echo "****************************************" if [ "$DOWNLOAD" = "y" ] then echo -n "git clone git://gitorious.org/fgx/fgx.git ... " if [ -d "fgx" ] then echo "fgx exists already." else git clone git://gitorious.org/fgx/fgx.git fgx fi echo " OK" fi cd fgx/ git branch -f $FGX_BRANCH origin/$FGX_BRANCH 2> /dev/null || true git checkout -f $FGX_BRANCH git pull cd .. cd fgx/src/ #Patch in order to pre-setting paths cd resources/default/ cp x_default.ini x_default.ini.orig cat x_default.ini | sed s/\\/usr\\/bin\\/fgfs/INSTALL_DIR_FGXMY_SLASH_HERE..MY_SLASH_HEREfgfsMY_SLASH_HEREbinMY_SLASH_HEREfgfs/g > tmp1 cat tmp1 | sed s/\\/usr\\/share\\/flightgear/INSTALL_DIR_FGXMY_SLASH_HERE..MY_SLASH_HEREfgfsMY_SLASH_HEREfgdata/g > tmp2 cat tmp2 | sed s/\\/usr\\/bin\\/terrasync/INSTALL_DIR_FGXMY_SLASH_HERE..MY_SLASH_HEREfgfsMY_SLASH_HEREbinMY_SLASH_HEREterrasync/g > tmp3 cat tmp3 | sed s/\\/usr\\/bin\\/fgcom/INSTALL_DIR_FGXMY_SLASH_HERE..MY_SLASH_HEREfgfsMY_SLASH_HEREbinMY_SLASH_HEREfgcom/g > tmp4 cat tmp4 | sed s/\\/usr\\/bin\\/js_demo/INSTALL_DIR_FGXMY_SLASH_HERE..MY_SLASH_HEREfgfsMY_SLASH_HEREbinMY_SLASH_HEREjs_demo/g > tmp5 INSTALL_DIR_FGX_NO_SLASHS=$(echo "$INSTALL_DIR_FGX" | sed -e 's/\//MY_SLASH_HERE/g') cat tmp5 | sed s/INSTALL_DIR_FGX/"$INSTALL_DIR_FGX_NO_SLASHS"/g > tmp cat tmp | sed s/MY_SLASH_HERE/\\//g > x_default.ini rm tmp* cd .. if [ ! "$UPDATE" = "UPDATE" ] then if [ "$RECONFIGURE" = "y" ] then echo -n "RECONFIGURE FGX ... " mkdir -p $INSTALL_DIR_FGX cd $INSTALL_DIR_FGX qmake ../../fgx/src echo " OK" fi fi if [ "$COMPILE" = "y" ] then cd $INSTALL_DIR_FGX echo "MAKE AND INSTALL FGX" echo "make $JOPTION $OOPTION " make $JOPTION $OOPTION cd .. fi cd "$current_build_dir" SCRIPT=run_fgx.sh echo "#!/bin/sh" > $SCRIPT echo "cd \$(dirname \$0)" >> $SCRIPT echo "cd $SUB_INSTALL_DIR" >> $SCRIPT echo "p=\$(pwd)" >> $SCRIPT echo "cd $FGX_INSTALL_DIR" >> $SCRIPT echo "export LD_LIBRARY_PATH=\$p/plib/lib:\$p/OpenSceneGraph/lib:\$p/simgear/lib" >> $SCRIPT echo "./fgx" >> $SCRIPT chmod 755 $SCRIPT if [[ $STOP_AFTER_ONE_MODULE = true ]]; then exit; fi fi ####################################################### # FGRUN ####################################################### SET_WINDOW_TITLE "Building FGRUN" FGRUN_INSTALL_DIR=fgrun INSTALL_DIR_FGRUN=$INSTALL_DIR/$FGRUN_INSTALL_DIR cd "$current_build_dir" if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="FGRUN"' ]] then echo "****************************************" echo "**************** FGRUN *****************" echo "****************************************" if [ "$DOWNLOAD" = "y" ] then echo -n "GIT FROM git://gitorious.org/fg/fgrun.git ... " if [ -d "fgrun" ] then echo "fgrun exists already." else git clone git://gitorious.org/fg/fgrun.git fgrun fi cd fgrun if [[ $(grep -L 'list(APPEND FLTK_LIBRARIES ${CMAKE_DL_LIBS})' CMakeLists.txt) != "" ]] then patch CMakeLists.txt <<\EOD --- master/fgrun/CMakeLists.txt 2013-05-25 06:37:31.882942339 -0400 +++ next/fgrun/CMakeLists.txt 2013-08-04 07:54:59.274097042 -0400 @@ -212,6 +212,10 @@ if ( FLTK_FOUND ) list(APPEND FLTK_LIBRARIES ${X11_Xft_LIB}) endif() + if ( CMAKE_DL_LIBS ) + list(APPEND FLTK_LIBRARIES ${CMAKE_DL_LIBS}) + endif() + set( CMAKE_REQUIRED_INCLUDES ${FLTK_INCLUDE_DIR} ) set( CMAKE_REQUIRED_LIBRARIES ${FLTK_LIBRARIES} ) message(STATUS "Using FLTK_LIBRARIES for fgrun: ${FLTK_LIBRARIES}") EOD fi git fetch origin if [ "$STABLE" = "STABLE" ] then # switch to stable branch # create local stable branch, ignore errors if it exists ls git branch -f $FGRUN_BRANCH origin/$FGRUN_BRANCH 2> /dev/null || true # switch to stable branch. No error is reported if we're already on the branch. git checkout -f $FGRUN_BRANCH # get indicated stable version git reset --hard $FGRUN_BRANCH else # switch to unstable branch # create local unstable branch, ignore errors if it exists git branch -f $FGRUN_BRANCH origin/$FGRUN_BRANCH 2> /dev/null || true # switch to unstable branch. No error is reported if we're already on the branch. git checkout -f $FGRUN_BRANCH # pull latest version from the unstable branch git pull fi cd .. echo " OK" fi cd fgrun if [ ! "$UPDATE" = "UPDATE" ] then if [ "$RECONFIGURE" = "y" ] then cd "$current_build_dir" mkdir -p build/fgrun cd "$current_build_dir"/build/fgrun echo -n "RECONFIGURE FGRUN ... " rm -f ../../fgrun/CMakeCache.txt rm -f CMakeCache.txt cmake ${VERBOSE_MAKEFILE} -D CMAKE_BUILD_TYPE="Release" -D CMAKE_CXX_FLAGS="-O3 -D__STDC_CONSTANT_MACROS" -D CMAKE_C_FLAGS="-O3" -D CMAKE_INSTALL_PREFIX:PATH="$INSTALL_DIR_FGRUN" -D "CMAKE_PREFIX_PATH=$INSTALL_DIR_OSG;$INSTALL_DIR_PLIB;$INSTALL_DIR_SIMGEAR" ../../fgrun/ echo " OK" fi fi if [ "$COMPILE" = "y" ] then cd "$current_build_dir"/build/fgrun echo "MAKE FGRUN" echo "make $JOPTION $OOPTION" make $JOPTION $OOPTION 2>1 echo "INSTALL FGRUN" make install fi cd "$current_build_dir" SCRIPT=run_fgrun.sh echo "#!/bin/sh" > $SCRIPT echo "cd \$(dirname \$0)" >> $SCRIPT echo "cd $SUB_INSTALL_DIR/$FGRUN_INSTALL_DIR/bin" >> $SCRIPT echo "export LD_LIBRARY_PATH=$install_dir_plib/lib:$install_dir_osg/lib:../../$SIMGEAR_INSTALL_DIR/lib" >> $SCRIPT #echo "export FG_AIRCRAFTS=\$PWD/../../$FGFS_INSTALL_DIR/aircrafts" >> $SCRIPT echo "./fgrun --fg-exe=\$PWD/../../$FGFS_INSTALL_DIR/bin/fgfs --fg-root=\$PWD/../../$FGFS_INSTALL_DIR/fgdata \$@" >> $SCRIPT chmod 755 $SCRIPT if [[ $STOP_AFTER_ONE_MODULE = true ]]; then exit; fi fi ####################################################### # FGCOMGUI ####################################################### SET_WINDOW_TITLE "Building FGCOMGUI" FGCOMGUI_INSTALL_DIR=fgcomgui INSTALL_DIR_FGCOMGUI=$INSTALL_DIR/$FGCOMGUI_INSTALL_DIR cd "$current_build_dir" if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="FGCOMGUI"' ]] then echo "****************************************" echo "*************** FGCOMGUI ***************" echo "****************************************" #svn checkout svn://svn.dfn.de:/fgcom/trunk fgcom if [ "$DOWNLOAD" = "y" ] then FGCOMGUI_STABLE_REVISION_="" if [ "$STABLE" = "STABLE" ] then FGCOMGUI_STABLE_REVISION_=" -r $FGCOMGUI_STABLE_REVISION" fi echo -n "SVN FROM https://fgcomgui.googlecode.com/svn/trunk ... " svn $FGCOMGUI_STABLE_REVISION_ co https://fgcomgui.googlecode.com/svn/trunk fgcomgui echo " OK" fi if [ -d "fgcomgui" ] then cd fgcomgui/ mkdir -p "$INSTALL_DIR_FGCOMGUI" if [ "$COMPILE" = "y" ] then echo "SCONS FGCOMGUI" echo "scons prefix=\"$INSTALL_DIR_FGCOMGUI\" $JOPTION" scons prefix="$INSTALL_DIR_FGCOMGUI" $JOPTION echo "INSTALL FGCOM" scons install fi cd "$current_build_dir" echo "#!/bin/sh" > run_fgcomgui.sh echo "cd \$(dirname \$0)" >> run_fgcomgui.sh echo "cd $SUB_INSTALL_DIR/$FGCOMGUI_INSTALL_DIR/bin" >> run_fgcomgui.sh echo "export LD_LIBRARY_PATH=$install_dir_plib/lib:$install_dir_osg/lib:../../$SIMGEAR_INSTALL_DIR/lib" >> run_fgcomgui.sh echo "export PATH=../../fgcom/bin/:$PATH" >> run_fgcomgui.sh echo "./fgcomgui \$@" >> run_fgcomgui.sh chmod 755 run_fgcomgui.sh fi if [[ $STOP_AFTER_ONE_MODULE = true ]]; then exit; fi fi ####################################################### # OPENRADAR ####################################################### SET_WINDOW_TITLE "Building OPENRADAR" OR_INSTALL_DIR=openradar INSTALL_DIR_OR=$INSTALL_DIR/$OR_INSTALL_DIR cd "$current_build_dir" if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="OPENRADAR"' ]] then echo "****************************************" echo "************** OPENRADAR ***************" echo "****************************************" if [ "$DOWNLOAD" = "y" ] then wget $OR_STABLE_RELEASE -O OpenRadar.zip cd install unzip ../OpenRadar.zip cd .. fi echo "#!/bin/sh" > run_openradar.sh echo "cd \$(dirname \$0)" >> run_openradar.sh echo "cd install/OpenRadar" >> run_openradar.sh echo "java -jar OpenRadar.jar" >> run_openradar.sh chmod 755 run_openradar.sh if [[ $STOP_AFTER_ONE_MODULE = true ]]; then exit; fi fi ####################################################### # ATLAS ####################################################### SET_WINDOW_TITLE "Building ATLAS" ATLAS_INSTALL_DIR=atlas INSTALL_DIR_ATLAS=$INSTALL_DIR/$ATLAS_INSTALL_DIR cd "$current_build_dir" if [[ "$(declare -p WHATTOBUILD)" =~ '['([0-9]+)']="ATLAS"' ]] then echo "****************************************" echo "**************** ATLAS *****************" echo "****************************************" if [ "$DOWNLOAD" = "y" ] then echo -n "CSV FROM atlas.cvs.sourceforge.net:/cvsroot/atlas ... " cvs -z3 -d:pserver:anonymous@atlas.cvs.sourceforge.net:/cvsroot/atlas co Atlas echo " OK" echo "fixing old function name \".get_gbs_center2(\" in Subbucket.cxx" cd Atlas/src cp Subbucket.cxx Subbucket.cxx.original cat Subbucket.cxx.original | sed s/\.get_gbs_center2\(/\.get_gbs_center\(/g > Subbucket.cxx cd "$current_build_dir" fi if [ -d "Atlas" ] then cd Atlas if [ ! "$UPDATE" = "UPDATE" ] then if [ "$RECONFIGURE" = "y" ] then cd "$current_build_dir" mkdir -p build/atlas cd Atlas echo "AUTOGEN ATLAS" ./autogen.sh echo "CONFIGURE ATLAS" cd "$current_build_dir"/build/atlas ../../Atlas/configure --prefix=$INSTALL_DIR_ATLAS --exec-prefix=$INSTALL_DIR_ATLAS --with-plib=$INSTALL_DIR_PLIB --with-simgear="$INSTALL_DIR_SIMGEAR" --with-fgbase="$INSTALL_DIR_FGFS/fgdata" CXXFLAGS="$CXXFLAGS -I$current_build_dir/OpenSceneGraph/include" make clean fi fi if [ "$COMPILE" = "y" ] then echo "MAKE ATLAS" echo "make $JOPTION $OOPTION" cd "$current_build_dir"/build/atlas make $JOPTION $OOPTION echo "INSTALL ATLAS" make install fi cd "$current_build_dir" echo "#!/bin/sh" > run_atlas.sh echo "cd \$(dirname \$0)" >> run_atlas.sh echo "cd $SUB_INSTALL_DIR/$ATLAS_INSTALL_DIR/bin" >> run_atlas.sh echo "export LD_LIBRARY_PATH=$install_dir_plib/lib:$install_dir_osg/lib:../../$SIMGEAR_INSTALL_DIR/lib" >> run_atlas.sh echo "./Atlas --fg-root=\$PWD/../../$FGFS_INSTALL_DIR/fgdata \$@" >> run_atlas.sh chmod 755 run_atlas.sh fi fi SET_WINDOW_TITLE "Finished Building" echo " finished at $(date)" >>download_and_compile_summary.log echo "" >>download_and_compile_summary.log check_build "$current_build_dir" echo "To start fgfs, run the run_fgfs.sh file" echo "To start terrasync, run the run_terrasync.sh file" echo "To start fgrun, run the run_fgrun.sh file" echo "To start fgcom, run the run_fgcom.sh file" echo "To start fgcom GUI, run the run_fgcomgui.sh file" echo "To start atlas, run the run_atlas.sh file" if [ "$HELP" = "HELP" ] then echo "" else echo "Usage: $0 -h" echo "for help" echo "$rebuild_command" >rebuild chmod +x rebuild fi