fgdata/Input/Joysticks/InterLink/interlink-elite.xml

<?xml version="1.0"?>
<!--
************************************************************************
InterLink Elite Controller Bindings

5 axis (2 joy, 1 rotary)
4 button (1 three-position, 2 two-position, 1 momentary)

Author: e-pilot - License - none - freely distributable and modifiable
Version 0.25 - tested under WindowsXP / Debian Lenny.  Not tested on Mac.

The Interlink Elite controller (by Futaba) is a component of
RealFlight R/C Flight Simulator and connects through a USB port.

Controls:


Left Joystick up-down:        Throttle
Left Joystick left-right:     Rudder
Right Joystick up-down:       Elevator
Right Joystick left-right:    Aileron

Three Position switch at upper left of controller:
                         up:  Elev trim up
                       down:  Elev trim down
           return to center:  Stop trim adjustment

Two position switch above left joystick:
             forward (push):  Gear Down
                back (pull):  Gear Up


Two position switch above right joystick:
             forward (push):  Apply All Brakes
                back (pull):  Release All Brakes

Rotary knob above right joystick:
           Rotate clockwise:  Lower Flaps
    Rotate counterclockwise:  Raise Flaps
           Return to center:  Stop flap adjustment

(Note: if flaps are adjustable in 3 increments, to obtain full
flaps, rotate knob clockwise and return to center three times)

Red Reset Button:             Reset View

************************************************************************
$Id$
-->
<PropertyList>

<name>GREAT PLANES InterLink Elite</name>
<name>InterLink Elite</name>

<axis n="0">
  <desc>Aileron</desc>
  <binding>
   <command>property-scale</command>
   <property>/controls/flight/aileron</property>
   <factor type="double">3.0</factor>
   <squared type="bool">true</squared>
  </binding>
</axis>

<axis n="1">
  <desc>Elevator</desc>
  <binding>
   <command>property-scale</command>
   <property>/controls/flight/elevator</property>
   <factor type="double">-3.5</factor>
   <squared type="bool">true</squared>
  </binding>
</axis>

<axis n="2">
  <desc>Throttle</desc>
  <binding>
   <command>property-scale</command>
   <property>/controls/engines/engine[0]/throttle</property>
   <offset type="double">-0.55</offset>
   <factor type="double">-1.0</factor>
  </binding>
  <binding>
   <command>property-scale</command>
   <property>/controls/engines/engine[1]/throttle</property>
   <offset type="double">-0.55</offset>
   <factor type="double">-1.0</factor>
  </binding>
  <binding>
   <command>property-scale</command>
   <property>/controls/engines/engine[2]/throttle</property>
   <offset type="double">-0.55</offset>
   <factor type="double">-1.0</factor>
  </binding>
  <binding>
   <command>property-scale</command>
   <property>/controls/engines/engine[3]/throttle</property>
   <offset type="double">-0.55</offset>
   <factor type="double">-1.0</factor>
  </binding>
  <binding>
   <command>property-scale</command>
   <property>/controls/engines/engine[4]/throttle</property>
   <offset type="double">-0.55</offset>
   <factor type="double">-1.0</factor>
  </binding>
  <binding>
   <command>property-scale</command>
   <property>/controls/engines/engine[5]/throttle</property>
   <offset type="double">-0.55</offset>
   <factor type="double">-1.0</factor>
  </binding>
  <binding>
   <command>property-scale</command>
   <property>/controls/engines/engine[6]/throttle</property>
   <offset type="double">-0.55</offset>
   <factor type="double">-1.0</factor>
  </binding>
  <binding>
   <command>property-scale</command>
   <property>/controls/engines/engine[7]/throttle</property>
   <offset type="double">-0.55</offset>
   <factor type="double">-1.0</factor>
  </binding>
   <binding>
   <command>property-scale</command>
   <property>/controls/engines/engine[8]/throttle</property>
   <offset type="double">-0.55</offset>
   <factor type="double">-1.0</factor>
  </binding>
</axis>

<axis>
  <desc>Rudder</desc>
  <number>
   <unix>4</unix>
   <windows>3</windows>
   <mac>4</mac>
  </number>
  <binding>
   <command>property-scale</command>
   <property>/controls/flight/rudder</property>
   <factor type="double">3.0</factor>
   <squared type="bool">true</squared>
  </binding>
</axis>

<axis>
  <desc>Rotary knob - Flap Control</desc>
  <number>
   <unix>3</unix>
   <windows>4</windows>
   <mac>3</mac>
  </number>
  <low>
   <repeatable>false</repeatable>
   <binding>
    <command>nasal</command>
    <script>controls.flapsDown(-1)</script>
   </binding>
  </low>
  <high>
   <repeatable>false</repeatable>
   <binding>
    <command>nasal</command>
    <script>controls.flapsDown(1)</script>
   </binding>
  </high>
</axis>

<button n="0">
  <desc>Above left joy - Gear Control</desc>
  <binding>
   <repeatable>false</repeatable>
   <command>nasal</command>
   <script>controls.gearDown(-1)</script>
  </binding>
  <mod-up>
   <binding>
    <repeatable>false</repeatable>
    <command>nasal</command>
    <script>controls.gearDown(1)</script>
   </binding>
  </mod-up>
</button>

<button n="1">
  <desc>Above right joy - Brakes</desc>
  <binding>
   <command>nasal</command>
   <script>controls.applyBrakes(1)</script>
  </binding>
  <mod-up>
   <binding>
    <command>nasal</command>
    <script>controls.applyBrakes(0)</script>
   </binding>
  </mod-up>
</button>

<button n="2">
  <desc>Red Reset - Reset View</desc>
  <binding>
   <command>nasal</command>
   <script>view.resetView()</script>
  </binding>
</button>

<button n="3">
  <desc>3 Pos up - Elevator trim up</desc>
  <repeatable type="bool">true</repeatable>
  <binding>
   <command>nasal</command>
   <script>controls.elevatorTrim(1)</script>
  </binding>
</button>

<button n="4">
  <desc>3 Pos down - Elevator trim down</desc>
  <repeatable type="bool">true</repeatable>
  <binding>
   <command>nasal</command>
   <script>controls.elevatorTrim(-1)</script>
  </binding>
</button>

</PropertyList>

<!-- end of InterLinkElite.xml -->