fly/fgdata
1
0
Fork 0
Code Activity
fgdata/Aircraft/c172p/Tutorials/runup.xml
Stuart Buchanan 0bb7e30ce1 2019.1 C172p 
From https://github.com/c172p-team/c172p/releases/tag/version%2F2019.1

Thanks to Gilberto AGOSTINHO and team.
2019-05-15 19:14:04 +01:00

639 lines
21 KiB
XML
Raw Blame History

<?xml version="1.0"?>
<PropertyList>
<name>Before Takeoff Checks</name>
<description>
This tutorial covers the before takeoff checklist. This involves the engine checks that are made in the run-up area just prior to taxiing to the runway and taking off.
For more information on the before takeoff checklist, see Section 2-11 of the FAA Airplane Flying Handbook available at http://www.faa.gov/library/manuals/aircraft/airplane_handbook/.
</description>
<audio-dir>Tutorials/startup</audio-dir>
<timeofday>morning</timeofday>
<presets>
<airport-id>PHTO</airport-id>
<on-ground>1</on-ground>
<altitude-ft>-9999</altitude-ft>
<latitude-deg>19.72419733</latitude-deg>
<longitude-deg>-155.052821</longitude-deg>
<heading-deg>40</heading-deg>
<airspeed-kt>0</airspeed-kt>
<glideslope-deg>0</glideslope-deg>
<offset-azimuth-deg>0</offset-azimuth-deg>
<offset-distance-nm>0</offset-distance-nm>
<airport-requested>true</airport-requested>
<runway-requested>true</runway-requested>
<parking-requested>true</parking-requested>
</presets>
<step>
<set>
<property>/sim/model/c172p/brake-parking</property>
<value>1</value>
</set>
<set>
<property>/controls/switches/master-bat</property>
<value>true</value>
</set>
<set>
<property>/controls/switches/master-alt</property>
<value>true</value>
</set>
<set>
<property>/controls/switches/master-avionics</property>
<value>true</value>
</set>
<set>
<property>/controls/flight/flaps</property>
<value>0.0</value>
</set>
<set>
<property>/instrumentation/adf/frequencies/selected-khz</property>
<value>332</value> <!-- PAHOA NDB -->
</set>
<set>
<property>/environment/weather-scenario</property>
<value>none</value>
</set>
<set>
<property>/controls/flight/elevator-trim</property>
<value>0.17</value>
</set>
<set>
<property>/controls/switches/magnetos</property>
<value>3</value>
</set>
<set>
<property>/controls/engines/current-engine/throttle</property>
<value>0.2</value>
</set>
<set>
<property>/controls/engines/engine/primer</property>
<value>4</value>
</set>
<set>
<property>/sim/model/c172p/securing/chock</property>
<value>false</value>
</set>
<set>
<property>/sim/model/c172p/securing/cowl-plugs-visible</property>
<value>false</value>
</set>
<set>
<property>/sim/model/c172p/securing/tiedownL-visible</property>
<value>false</value>
</set>
<set>
<property>/sim/model/c172p/securing/tiedownR-visible</property>
<value>false</value>
</set>
<set>
<property>/sim/model/c172p/securing/tiedownT-visible</property>
<value>false</value>
</set>
<set>
<property>/sim/model/c172p/securing/pitot-cover-visible</property>
<value>false</value>
</set>
<set>
<property>/sim/model/c172p/cockpit/control-lock-placed</property>
<value>false</value>
</set>
<set>
<property>/sim/model/c172p/cockpit/control-lock-visible</property>
<value>false</value>
</set>
<nasal>
<script>
setprop("/controls/engines/current-engine/mixture", 1.0);
setprop("/controls/switches/starter", 1);
</script>
</nasal>
<message></message>
<view>
<heading-offset-deg>0.0</heading-offset-deg>
<pitch-offset-deg>-12</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.21</x-offset-m>
<y-offset-m>0.19</y-offset-m>
<field-of-view>73.6</field-of-view>
</view>
</step>
<step>
<message>In this lesson we'll cover the pre-takeoff checks.</message>
<nasal>
<script>
var listeners = std.Vector.new();
listeners.append(setlistener("/engines/active-engine/running", func (node) {
if (node.getBoolValue()) {
setprop("/controls/switches/starter", 0);
foreach (var listener; listeners.vector) {
removelistener(listener);
}
listeners.clear();
}
}, 1, 0));
</script>
</nasal>
</step>
<step>
<message>You can access the pre-takeoff checklist by selecting Help-&gt;Checklists from the menu.</message>
<wait>10</wait>
</step>
<step>
<message>The parking brakes are already applied, so our first check is that the flight controls are free and correct.
</message>
</step>
<step>
<message>Check that moving the yoke from left to right moves the aileron in the expected manner.</message>
<view>
<heading-offset-deg>105.2</heading-offset-deg>
<pitch-offset-deg>1.0</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.3</x-offset-m>
<y-offset-m>0.2</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>55.0</field-of-view>
</view>
<marker>
<x-m>1.4000</x-m>
<y-m>-4.0000</y-m>
<z-m>0.3000</z-m>
<scale>41.0000</scale>
</marker>
</step>
<step>
<message>Now, check the other aileron. We're checking that the controls aren't jammed by our seatbelts etc.
and that the aircraft has been rigged correctly.</message>
<view>
<heading-offset-deg>-105.2</heading-offset-deg>
<pitch-offset-deg>1.0</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.3</x-offset-m>
<y-offset-m>0.2</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>55.0</field-of-view>
</view>
<marker>
<x-m>1.4000</x-m>
<y-m>4.0000</y-m>
<z-m>0.3000</z-m>
<scale>41.0000</scale>
</marker>
</step>
<step>
<message>Check the trim is in position</message>
<view>
<heading-offset-deg>349.2</heading-offset-deg>
<pitch-offset-deg>-50</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.2</x-offset-m>
<y-offset-m>0.3</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>55.0</field-of-view>
</view>
<marker>
<x-m>-0.3129</x-m>
<y-m>-0.0422</y-m>
<z-m>-0.4427</z-m>
<scale>4.0</scale>
</marker>
<error>
<message>Set the elevator trim a bit more NOSE UP (scroll down with the mouse wheel)!</message>
<condition>
<greater-than>
<property>/controls/flight/elevator-trim</property>
<value>-0.1</value>
</greater-than>
</condition>
</error>
<error>
<message>Set the elevator trim a bit more NOSE DOWN (scroll up with the mouse wheel)!</message>
<condition>
<less-than>
<property>/controls/flight/elevator-trim</property>
<value>-0.2</value>
</less-than>
</condition>
</error>
<exit>
<condition>
<and>
<greater-than>
<property>/controls/flight/elevator-trim</property>
<value>-0.2</value>
</greater-than>
<less-than>
<property>/controls/flight/elevator-trim</property>
<value>-0.08</value>
</less-than>
</and>
</condition>
</exit>
</step>
<step>
<message>Now check that the mixture is set to rich - fully in.</message>
<view>
<heading-offset-deg>336.5</heading-offset-deg>
<pitch-offset-deg>-30.3</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.2</x-offset-m>
<y-offset-m>0.3</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>55.0</field-of-view>
</view>
<marker>
<x-m>-0.0570</x-m>
<y-m>-0.0165</y-m>
<z-m>0.0000</z-m>
<scale>1.6116</scale>
</marker>
<error>
<message>The mixture isn't completely in. Press m to richen the mixture to fully rich.</message>
<condition>
<less-than>
<property>/controls/engines/current-engine/mixture</property>
<value>0.99</value>
</less-than>
</condition>
</error>
</step>
<step>
<message>Set the throttle to 1700 rpm for the engine checks.</message>
<view>
<heading-offset-deg>8.4</heading-offset-deg>
<pitch-offset-deg>-31.3</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.2</x-offset-m>
<y-offset-m>0.3</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>34.2</field-of-view>
</view>
<marker>
<x-m>-0.3653</x-m>
<y-m>-0.3140</y-m>
<z-m>-0.1065</z-m>
<scale>3.6942</scale>
</marker>
<error>
<message>That's a bit high. Reduce throttle to 1700 rpm with PgDn, or your joystick throttle control.</message>
<condition>
<greater-than>
<property>/engines/active-engine/rpm</property>
<value>1725.0</value>
</greater-than>
</condition>
</error>
<error>
<message>That's too low. Increase throttle to 1700 rpm with PgUp, or your joystick throttle control.</message>
<condition>
<less-than>
<property>/engines/active-engine/rpm</property>
<value>1575.0</value>
</less-than>
</condition>
</error>
<exit>
<condition>
<and>
<greater-than>
<property>/engines/active-engine/rpm</property>
<value>1575</value>
</greater-than>
<less-than>
<property>/engines/active-engine/rpm</property>
<value>1725</value>
</less-than>
</and>
</condition>
</exit>
</step>
<step>
<message>This aircraft has a vacuum pump to power some instruments, such as the attitude indicator and directional gyro.</message>
</step>
<step>
<message>
We need to check that the vacuum system is working correct by checking the suction gauge.</message>
<view>
<heading-offset-deg>17.3</heading-offset-deg>
<pitch-offset-deg>-25</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.2</x-offset-m>
<y-offset-m>0.3</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>23.2</field-of-view>
</view>
<marker>
<x-m>-0.3578</x-m>
<y-m>-0.4307</y-m>
<z-m>0.0583</z-m>
<scale>0.9829</scale>
</marker>
</step>
<step>
<message>Check that the engine instruments are in the green.</message>
<view>
<heading-offset-deg>10.7</heading-offset-deg>
<pitch-offset-deg>-30</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.2</x-offset-m>
<y-offset-m>0.3</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>23.2</field-of-view>
</view>
<marker>
<x-m>-0.3671</x-m>
<y-m>-0.4031</y-m>
<z-m>-0.0289</z-m>
<scale>3.0000</scale>
</marker>
</step>
<step>
<message>Check that the electrical system is also fine.</message>
<view>
<heading-offset-deg>15.2</heading-offset-deg>
<pitch-offset-deg>-35</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.2</x-offset-m>
<y-offset-m>0.3</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>23.2</field-of-view>
</view>
<marker>
<x-m>-0.3560</x-m>
<y-m>-0.4077</y-m>
<z-m>-0.1345</z-m>
<scale>1.9752</scale>
</marker>
</step>
<step>
<message>Now we need to check that the magnetos are working correctly.</message>
<view>
<heading-offset-deg>11.0</heading-offset-deg>
<pitch-offset-deg>-35.7</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.2</x-offset-m>
<y-offset-m>0.3</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>23.2</field-of-view>
</view>
<marker>
<x-m>-0.0430</x-m>
<y-m>-0.2975</y-m>
<z-m>-0.0066</z-m>
<scale>1.6116</scale>
</marker>
<set>
<property>/sim/panel-hotspots</property>
<value>true</value>
</set>
<set>
<property>/sim/model/hide-yoke</property>
<value>true</value>
</set>
</step>
<step>
<message>Use your middle mouse button, or use your mouse scrollwheel to move the key to the RIGHT (R) position.
There should be a small drop in the tachometer.</message>
<view>
<heading-offset-deg>11.0</heading-offset-deg>
<pitch-offset-deg>-35.7</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.2</x-offset-m>
<y-offset-m>0.3</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>23.2</field-of-view>
</view>
<marker>
<x-m>-0.0430</x-m>
<y-m>-0.2975</y-m>
<z-m>-0.0066</z-m>
<scale>1.6116</scale>
</marker>
<error>
<message>Set the key to RIGHT.</message>
<condition>
<not-equals>
<property>/controls/switches/magnetos</property>
<value>1</value>
</not-equals>
</condition>
</error>
<exit>
<condition>
<equals>
<property>/controls/switches/magnetos</property>
<value>1</value>
</equals>
</condition>
</exit>
</step>
<step>
<message>Click the key twice with the left mouse button, to switch back to both magnetos.
The tachometer should recover back to 1700rpm.</message>
<view>
<heading-offset-deg>11.0</heading-offset-deg>
<pitch-offset-deg>-35.7</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.2</x-offset-m>
<y-offset-m>0.3</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>23.2</field-of-view>
</view>
<marker>
<x-m>-0.0430</x-m>
<y-m>-0.2975</y-m>
<z-m>-0.0066</z-m>
<scale>1.6116</scale>
</marker>
<error>
<message>Set the key to BOTH.</message>
<condition>
<not-equals>
<property>/controls/switches/magnetos</property>
<value>3</value>
</not-equals>
</condition>
</error>
<exit>
<condition>
<equals>
<property>/controls/switches/magnetos</property>
<value>3</value>
</equals>
</condition>
</exit>
</step>
<step>
<message>Now we'll check the left magneto. Use your middle mouse button or scroll wheel to switch to the left magneto.
Again, there should be a small drop in the tachometer.</message>
<view>
<heading-offset-deg>11.0</heading-offset-deg>
<pitch-offset-deg>-35.7</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.2</x-offset-m>
<y-offset-m>0.3</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>23.2</field-of-view>
</view>
<marker>
<x-m>-0.0430</x-m>
<y-m>-0.2975</y-m>
<z-m>-0.0066</z-m>
<scale>1.6116</scale>
</marker>
<error>
<message>Set the key to LEFT.</message>
<condition>
<not-equals>
<property>/controls/switches/magnetos</property>
<value>2</value>
</not-equals>
</condition>
</error>
<exit>
<condition>
<equals>
<property>/controls/switches/magnetos</property>
<value>2</value>
</equals>
</condition>
</exit>
</step>
<step>
<message>Click the key, to switch back to both magnetos.
The tachometer should recover back to 1700rpm.</message>
<view>
<heading-offset-deg>11.0</heading-offset-deg>
<pitch-offset-deg>-35.7</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.2</x-offset-m>
<y-offset-m>0.3</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>23.2</field-of-view>
</view>
<marker>
<x-m>-0.0430</x-m>
<y-m>-0.2975</y-m>
<z-m>-0.0066</z-m>
<scale>1.6116</scale>
</marker>
<error>
<message>Set the key to BOTH.</message>
<condition>
<not-equals>
<property>/controls/switches/magnetos</property>
<value>3</value>
</not-equals>
</condition>
</error>
<exit>
<condition>
<equals>
<property>/controls/switches/magnetos</property>
<value>3</value>
</equals>
</condition>
</exit>
</step>
<!-- We should now check for carb heat, but we don't have that modeled yet -->
<step>
<message>Set the throttle back to between 800 and 1000 rpm.</message>
<set>
<property>/sim/panel-hotspots</property>
<value>false</value>
</set>
<view>
<heading-offset-deg>9.2</heading-offset-deg>
<pitch-offset-deg>-33.5</pitch-offset-deg>
<roll-offset-deg>0.0</roll-offset-deg>
<x-offset-m>-0.2</x-offset-m>
<y-offset-m>0.3</y-offset-m>
<z-offset-m>0.4</z-offset-m>
<field-of-view>23.2</field-of-view>
</view>
<marker>
<x-m>-0.2000</x-m>
<y-m>-0.2901</y-m>
<z-m>-0.0132</z-m>
<scale>2.7851</scale>
</marker>
<error>
<message>That's a bit high. Reduce throttle slightly with PgDn, or your joystick throttle control.</message>
<condition>
<greater-than>
<property>/engines/active-engine/rpm</property>
<value>1020.0</value>
</greater-than>
</condition>
</error>
<error>
<message>That's too low. Increase throttle slightly with PgUp, or your joystick throttle control.</message>
<condition>
<less-than>
<property>/engines/active-engine/rpm</property>
<value>780.0</value>
</less-than>
</condition>
</error>
<exit>
<condition>
<and>
<greater-than>
<property>/engines/active-engine/rpm</property>
<value>780</value>
</greater-than>
<less-than>
<property>/engines/active-engine/rpm</property>
<value>1020</value>
</less-than>
</and>
</condition>
</exit>
</step>
<step>
<message>Our pre-takeoff checks are now complete. We're ready to fly.</message>
</step>
</PropertyList>
View git blame Copy permalink