fly/fgdata
1
0
Fork 0
Code Activity
fgdata/Aircraft/c172p/Models/c172p.xml
curt 73a9cb2849 Dave Martin: 
Changes made 19/12/2004

Panel re-oriented
3d Compass shows through windows.
Wing-tips slightly altered.

Changes made 18/12/2004

Prop spinner shortened and widened
Nose area slightly remodelled to fit silouette
Nose texture altered to place lower intake correctly

Nose wheel reduced in size.
Nose leg Oleo guide added (does not rotate - is this correct with real ac?)
Nose wheel Axle added.
Nose wheel fixed to rotate about it's shaft axis.

Windscreen / panel mesh changed so that panel no longer protrudes thru dash
Panel instruments moved to represent the geometries of the real cockpit.
Pilot / Copilot Yokes moved inboard to represent the geometries of the real cockpit.
Alpha layer added to interior texture to prevent panel showing through seats / yokes.
Interior texture duplicated and mapped to panel only to allow panel to show.
Front seats moved slightly inboard.

Landing light pair added to port wing texture.
Alpah layer added to wing texture to prevent panel showing through.
Texture remapped to Flaps (no shows ribs again).
Wing strut outer joins brought inboard to point of wing taper to match real aircraft geometries.
Wing struts thinned in front profile and thickened in side profile.
VHF aerials moved aft to their usual position.
Maingear legs altered so they now join with the fusealage (previously, 20cm gap)
Rear window altered slightly to match silouette.

Rear (white) Navigation Light made to translate with the rudder.


Not yet done: independant landing and taxi lights on port wing
2004-12-25 16:47:14 +00:00

675 lines
13 KiB
XML
Raw Blame History

<?xml version="1.0"?>
<PropertyList>
<path>c172p.ac</path>
<!-- Temporarily use the 2D panel hack, until I have time to make
3D instruments -->
<panel>
<!-- <name>PanelInstruments</name> -->
<path>Aircraft/c172p/Models/c172p-2d-panel.xml</path>
<bottom-left>
<x-m>-0.37</x-m>
<y-m>-0.50</y-m>
<z-m>-0.10</z-m>
</bottom-left>
<bottom-right>
<x-m>-0.37</x-m>
<y-m> 0.50</y-m>
<z-m>-0.10</z-m>
</bottom-right>
<top-left>
<x-m>-0.37</x-m>
<y-m>-0.50</y-m>
<z-m> 0.25</z-m>
</top-left>
</panel>
<model>
<name>MagCompass</name>
<path>Aircraft/Instruments-3d/mag-compass.xml</path>
<offsets>
<x-m>-0.35</x-m>
<y-m>0.00</y-m>
<z-m>0.16</z-m>
</offsets>
</model>
<!-- LOD for the model as a whole -->
<animation>
<type>range</type>
<min-m>0</min-m>
<max-m>10000</max-m>
</animation>
<!-- Controls -->
<animation>
<name>CarbHeatGroup</name>
<object-name>CarbHeat</object-name>
<object-name>CarbHeatBack</object-name>
<object-name>CarbHeatRod</object-name>
</animation>
<animation>
<name>ThrottleGroup</name>
<object-name>Throttle</object-name>
<object-name>ThrottleRod</object-name>
</animation>
<animation>
<name>MixtureGroup</name>
<object-name>Mixture</object-name>
<object-name>MixtureRod</object-name>
</animation>
<animation>
<name>FlapSwitchGroup</name>
<object-name>FlapSwitch</object-name>
<object-name>FlapSwitchRod</object-name>
</animation>
<animation>
<name>ElectronicsGroup</name>
<object-name>TaxiLightSwitch</object-name>
<object-name>LandingLightSwitch</object-name>
<object-name>PitotHeatSwitch</object-name>
<object-name>NavLightSwitch</object-name>
<object-name>BeaconSwitch</object-name>
<object-name>StrobeSwitch</object-name>
<!--
<object-name>ElectronicsLabels</object-name>
<object-name>ElectronicsLabels2</object-name>
-->
</animation>
<!-- <animation>
<name>ControlsGroup</name>
<object-name>PanelInstruments</object-name>
<object-name>ElectronicsGroup</object-name>
<object-name>LeftYoke</object-name>
<object-name>RightYoke</object-name>
<object-name>CarbHeatGroup</object-name>
<object-name>ThrottleGroup</object-name>
<object-name>MixtureGroup</object-name>
<object-name>FlapSwitchGroup</object-name>
<object-name>TrimWheel</object-name>
</animation> -->
<!-- <animation>
<type>range</type>
<object-name>ControlsGroup</object-name>
<min-m>0</min-m>
<max-m>10.0</max-m>
</animation> -->
<animation>
<type>translate</type>
<object-name>LeftYoke</object-name>
<object-name>RightYoke</object-name>
<property>controls/flight/elevator</property>
<factor>-0.03</factor>
<axis>
<x>1.0</x>
<y>0.0</y>
<z>0.0</z>
</axis>
</animation>
<animation>
<type>rotate</type>
<object-name>LeftYoke</object-name>
<property>controls/flight/aileron</property>
<factor>-45</factor>
<center>
<x-m>-0.23</x-m>
<y-m>-0.245</y-m>
<z-m>-0.13</z-m>
</center>
<axis>
<x>1.0</x>
<y>0.0</y>
<z>0.0</z>
</axis>
</animation>
<animation>
<type>rotate</type>
<object-name>RightYoke</object-name>
<property>controls/flight/aileron</property>
<factor>-45</factor>
<center>
<x-m>-0.23</x-m>
<y-m>0.245</y-m>
<z-m>-0.13</z-m>
</center>
<axis>
<x>1.0</x>
<y>0.0</y>
<z>0.0</z>
</axis>
</animation>
<animation>
<type>translate</type>
<object-name>CarbHeatGroup</object-name>
<property>controls/anti-ice/engine[0]/carb-heat</property>
<factor>-0.04</factor>
<axis>
<x>1.0</x>
<y>0.0</y>
<z>0.0</z>
</axis>
</animation>
<animation>
<type>translate</type>
<object-name>ThrottleGroup</object-name>
<property>controls/engines/engine[0]/throttle</property>
<factor>-0.10</factor>
<axis>
<x>1.0</x>
<y>0.0</y>
<z>0.0</z>
</axis>
</animation>
<animation>
<type>translate</type>
<object-name>MixtureGroup</object-name>
<property>controls/engines/engine[0]/mixture</property>
<factor>-0.10</factor>
<axis>
<x>1.0</x>
<y>0.0</y>
<z>0.0</z>
</axis>
</animation>
<animation>
<type>rotate</type>
<property>controls/flight/flaps</property>
<object-name>FlapSwitchGroup</object-name>
<factor>60</factor>
<offset-deg>-30</offset-deg>
<axis>
<x>0.0</x>
<y>1.0</y>
<z>0.0</z>
</axis>
<center>
<x-m>-0.39</x-m>
<y-m>0.19</y-m>
<z-m>-0.25</z-m>
</center>
</animation>
<animation>
<type>rotate</type>
<object-name>TrimWheel</object-name>
<property>controls/flight/elevator-trim</property>
<factor>-360</factor>
<axis>
<x>0.0</x>
<y>1.0</y>
<z>0.0</z>
</axis>
<center>
<x-m>-0.41</x-m>
<y-m>-0.04</y-m>
<z-m>-0.46</z-m>
</center>
</animation>
<animation>
<type>rotate</type>
<object-name>TaxiLightSwitch</object-name>
<property>controls/lighting/taxi-light</property>
<factor>-55</factor>
<axis>
<x>0.0</x>
<y>1.0</y>
<z>0.0</z>
</axis>
<center>
<x-m>-0.363</x-m>
<y-m>0</y-m>
<z-m>-0.221</z-m>
</center>
</animation>
<animation>
<type>rotate</type>
<object-name>LandingLightSwitch</object-name>
<property>controls/lighting/landing-lights</property>
<factor>-55</factor>
<axis>
<x>0.0</x>
<y>1.0</y>
<z>0.0</z>
</axis>
<center>
<x-m>-0.363</x-m>
<y-m>0</y-m>
<z-m>-0.221</z-m>
</center>
</animation>
<animation>
<type>rotate</type>
<object-name>PitotHeatSwitch</object-name>
<property>controls/anti-ice/pitot-heat</property>
<factor>-55</factor>
<axis>
<x>0.0</x>
<y>1.0</y>
<z>0.0</z>
</axis>
<center>
<x-m>-0.363</x-m>
<y-m>0</y-m>
<z-m>-0.269</z-m>
</center>
</animation>
<animation>
<type>rotate</type>
<object-name>NavLightSwitch</object-name>
<property>controls/lighting/nav-lights</property>
<factor>-55</factor>
<axis>
<x>0.0</x>
<y>1.0</y>
<z>0.0</z>
</axis>
<center>
<x-m>-0.363</x-m>
<y-m>0</y-m>
<z-m>-0.269</z-m>
</center>
</animation>
<animation>
<type>rotate</type>
<object-name>BeaconSwitch</object-name>
<property>controls/lighting/beacon</property>
<factor>-55</factor>
<axis>
<x>0.0</x>
<y>1.0</y>
<z>0.0</z>
</axis>
<center>
<x-m>-0.363</x-m>
<y-m>0</y-m>
<z-m>-0.269</z-m>
</center>
</animation>
<animation>
<type>rotate</type>
<object-name>StrobeSwitch</object-name>
<property>controls/lighting/strobe</property>
<factor>-55</factor>
<axis>
<x>0.0</x>
<y>1.0</y>
<z>0.0</z>
</axis>
<center>
<x-m>-0.363</x-m>
<y-m>0</y-m>
<z-m>-0.269</z-m>
</center>
</animation>
<!-- Interior -->
<animation>
<name>InteriorGroup</name>
<object-name>Cabin</object-name>
<object-name>Panel</object-name>
<object-name>PilotSeat</object-name>
<object-name>CopilotSeat</object-name>
<object-name>BackSeat</object-name>
<object-name>MagCompass</object-name>
</animation>
<animation>
<type>range</type>
<object-name>InteriorGroup</object-name>
<min-m>0</min-m>
<max-m>50</max-m>
</animation>
<!-- Airframe -->
<animation>
<type>select</type>
<object-name>Propeller</object-name>
<condition>
<less-than>
<property>engines/engine[0]/rpm</property>
<value>200</value>
</less-than>
</condition>
</animation>
<animation>
<type>select</type>
<object-name>Propeller.Slow</object-name>
<condition>
<and>
<greater-than>
<property>engines/engine[0]/rpm</property>
<value>190</value>
</greater-than>
<less-than>
<property>engines/engine[0]/rpm</property>
<value>1200</value>
</less-than>
</and>
</condition>
</animation>
<animation>
<type>select</type>
<object-name>Propeller.Fast</object-name>
<condition>
<greater-than>
<property>engines/engine[0]/rpm</property>
<value>1200</value>
</greater-than>
</condition>
</animation>
<animation>
<type>select</type>
<object-name>LeftNavLightOn</object-name>
<object-name>RightNavLightOn</object-name>
<object-name>RearNavLightOn</object-name>
<condition>
<property>controls/lighting/nav-lights</property>
</condition>
</animation>
<animation>
<type>select</type>
<object-name>LeftNavLightOff</object-name>
<object-name>RightNavLightOff</object-name>
<object-name>RearNavLightOff</object-name>
<condition>
<not>
<property>controls/lighting/nav-lights</property>
</not>
</condition>
</animation>
<animation>
<name>BeaconFlasher</name>
<type>timed</type>
<object-name>BeaconOff</object-name>
<object-name>BeaconOn</object-name>
<duration-sec>1.0</duration-sec>
</animation>
<animation>
<type>select</type>
<object-name>BeaconFlasher</object-name>
<condition>
<property>controls/lighting/beacon</property>
</condition>
</animation>
<!-- Experimental Taxi and Landing Lights -->
<animation>
<type>spin</type>
<object-name>Propeller</object-name>
<property>engines/engine[0]/rpm</property>
<factor>-1</factor>
<center>
<x-m>-1.77</x-m>
<y-m>0</y-m>
<z-m>-0.12</z-m>
</center>
<axis>
<x>1.0</x>
<y>0.0</y>
<z>0.0</z>
</axis>
</animation>
<animation>
<type>spin</type>
<object-name>Propeller.Slow</object-name>
<property>engines/engine[0]/rpm</property>
<factor>-0.1</factor>
<center>
<x-m>-1.77</x-m>
<y-m>0</y-m>
<z-m>-0.12</z-m>
</center>
<axis>
<x>1.0</x>
<y>0.0</y>
<z>0.0</z>
</axis>
</animation>
<animation>
<type>spin</type>
<object-name>Propeller.Fast</object-name>
<property>engines/engine[0]/rpm</property>
<factor>-0.001</factor>
<center>
<x-m>-1.77</x-m>
<y-m>0</y-m>
<z-m>-0.12</z-m>
</center>
<axis>
<x>1.0</x>
<y>0.0</y>
<z>0.0</z>
</axis>
</animation>
<animation>
<type>rotate</type>
<object-name>NoseWheel</object-name>
<object-name>NoseWheelStrut</object-name>
<object-name>Axle</object-name>
<property>surface-positions/rudder-pos-norm</property>
<factor>-30.0</factor>
<center>
<x-m>-0.9</x-m>
<y-m>0</y-m>
<z-m>-0.59</z-m>
</center>
<axis>
<x>0.25</x>
<y>0.00</y>
<z>1.0</z>
</axis>
</animation>
<animation>
<type>rotate</type>
<object-name>LeftAileron</object-name>
<property>surface-positions/left-aileron-pos-norm</property>
<interpolation>
<entry>
<ind>-1.0</ind>
<dep>-15</dep>
</entry>
<entry>
<ind>0.0</ind>
<dep>0</dep>
</entry>
<entry>
<ind>1.0</ind>
<dep>20</dep>
</entry>
</interpolation>
<center>
<x-m>1.1</x-m>
<y-m>-1.96</y-m>
<z-m>0.35</z-m>
</center>
<axis>
<x>0.49</x>
<y>2.65</y>
<z>-0.03</z>
</axis>
</animation>
<animation>
<type>rotate</type>
<object-name>RightAileron</object-name>
<property>surface-positions/right-aileron-pos-norm</property>
<interpolation>
<entry>
<ind>-1.0</ind>
<dep>20</dep>
</entry>
<entry>
<ind>0.0</ind>
<dep>0</dep>
</entry>
<entry>
<ind>1.0</ind>
<dep>-15</dep>
</entry>
</interpolation>
<center>
<x-m>1.1</x-m>
<y-m>1.96</y-m>
<z-m>0.35</z-m>
</center>
<axis>
<x>-0.49</x>
<y>2.65</y>
<z>0.03</z>
</axis>
</animation>
<animation>
<type>translate</type>
<object-name>LeftFlap</object-name>
<object-name>RightFlap</object-name>
<property>surface-positions/flap-pos-norm</property>
<factor>0.15</factor>
<axis>
<x>1.0</x>
<y>0.0</y>
<z>0.2</z>
</axis>
</animation>
<animation>
<type>rotate</type>
<object-name>LeftFlap</object-name>
<property>surface-positions/flap-pos-norm</property>
<factor>30</factor>
<center>
<x-m>0.76</x-m>
<y-m>-0.53</y-m>
<z-m>0.32</z-m>
</center>
<axis>
<x>0.0</x>
<y>1.0</y>
<z>-0.1</z>
</axis>
</animation>
<animation>
<type>rotate</type>
<object-name>RightFlap</object-name>
<property>surface-positions/flap-pos-norm</property>
<factor>30</factor>
<center>
<x-m>0.76</x-m>
<y-m>-0.53</y-m>
<z-m>0.32</z-m>
</center>
<axis>
<x>0.0</x>
<y>1.0</y>
<z>0.1</z>
</axis>
</animation>
<animation>
<type>rotate</type>
<object-name>Elevators</object-name>
<object-name>ElevatorTrimTab</object-name>
<property>surface-positions/elevator-pos-norm</property>
<interpolation>
<entry>
<ind>-1.0</ind>
<dep>-28</dep>
</entry>
<entry>
<ind>0</ind>
<dep>0</dep>
</entry>
<entry>
<ind>1.0</ind>
<dep>23</dep>
</entry>
</interpolation>
<center>
<x-m>4.84</x-m>
<y-m>0.0</y-m>
<z-m>-0.17</z-m>
</center>
<axis>
<x>0.0</x>
<y>1.0</y>
<z>0.0</z>
</axis>
</animation>
<animation>
<type>rotate</type>
<object-name>ElevatorTrimTab</object-name>
<property>controls/flight/elevator-trim</property>
<factor>25</factor>
<center>
<x-m>5.06</x-m>
<y-m>1.12</y-m>
<z-m>-0.18</z-m>
</center>
<axis>
<x>0.17</x>
<y>-0.82</y>
<z>0.0</z>
</axis>
</animation>
<animation>
<type>rotate</type>
<object-name>Rudder</object-name>
<object-name>RearNavLightOn</object-name>
<object-name>RearNavLightOff</object-name>
<property>surface-positions/rudder-pos-norm</property>
<factor>17.5</factor>
<center>
<x-m>4.84</x-m>
<y-m>0.0</y-m>
<z-m>-.16</z-m>
</center>
<axis>
<x>0.25</x>
<y>0.0</y>
<z>1.0</z>
</axis>
</animation>
</PropertyList>
View git blame Copy permalink