be1a0a1c9e
feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
447 lines
11 KiB
XML
447 lines
11 KiB
XML
<?xml version="1.0"?>
|
|
|
|
<!--
|
|
Default NAVCOM radio instrument.
|
|
Parameterized and improved
|
|
John Check <j4strngs@rockfish.net>
|
|
June 2001
|
|
|
|
This is an instrument configuration file for the open-source flight
|
|
simulator FlightGear (www.flightgear.org). The file is an XML-encoded
|
|
FlightGear property list defining the instrument's layers and actions.
|
|
|
|
Each instrument is composed of layers stacked on top of each other.
|
|
A layer may be a texture (with transparent parts to show the layers
|
|
underneath), text, or a special layer that switches between two
|
|
others (say, to turn an indicator light on or off). Each layer can
|
|
move independently in proportion to a property value, and text
|
|
can be generated from property values as well: all of the layer's
|
|
movements are defined as transformations.
|
|
|
|
Actions are hotspots on the instrument that will respond to a mouse
|
|
click. Actions always modify the values of properties, either by
|
|
adjusting them, toggling them, or swaping them with other
|
|
properties' values.
|
|
-->
|
|
|
|
<!--
|
|
2/10/06
|
|
Dave Perry added a check for Nav/Com power, so the frequencies won't
|
|
light if
|
|
/systems/electrical/outputs/nav is less than 8.0 volts. See the con-
|
|
dition added for these text layers below. This allows a more realistic
|
|
master switch and avionics master switch implementation in the electrical
|
|
system model. I also checked to make sure this does not negatively
|
|
impact the c172p. Had to add a property alias to the params after the
|
|
nav1.xml include in c172p-2d-panel.xml. Since the electrical system
|
|
for the c172p has this voltage at 28 volts, these changes have no
|
|
impact on the c172p.
|
|
-->
|
|
<PropertyList>
|
|
|
|
<name>NavCom Radio</name>
|
|
<w-base>256</w-base>
|
|
<h-base>86</h-base>
|
|
|
|
<params>
|
|
<comm-freq-selected-prop>/instrumentation/comm[0]/frequencies/selected-mhz</comm-freq-selected-prop>
|
|
<comm-freq-standby-prop>/instrumentation/comm[0]/frequencies/standby-mhz</comm-freq-standby-prop>
|
|
<nav-freq-selected-prop>/instrumentation/nav[0]/frequencies/selected-mhz</nav-freq-selected-prop>
|
|
<nav-freq-standby-prop>/instrumentation/nav[0]/frequencies/standby-mhz</nav-freq-standby-prop>
|
|
<nav-morse-id-volume-prop>/instrumentation/nav[0]/volume</nav-morse-id-volume-prop>
|
|
<nav-morse-ident-toggle-prop>/instrumentation/nav[0]/ident</nav-morse-ident-toggle-prop>
|
|
<nav-com-pwr-volts-prop>/systems/electrical/outputs/nav[0]</nav-com-pwr-volts-prop>
|
|
</params>
|
|
|
|
<layers>
|
|
|
|
<layer>
|
|
<name>background</name>
|
|
<texture>
|
|
<path>Aircraft/Instruments/Textures/bendix-kx155.rgb</path>
|
|
<y1>0.0</y1>
|
|
<y2>0.30859375</y2>
|
|
<x1>0.0</x1>
|
|
<x2>1.0</x2>
|
|
</texture>
|
|
</layer>
|
|
|
|
<layer>
|
|
<name>nav frequencies</name>
|
|
<condition>
|
|
<greater-than>
|
|
<property alias="../../../../../params/nav-com-pwr-volts-prop"/>
|
|
<value>8.0</value>
|
|
</greater-than>
|
|
</condition>
|
|
<type>text</type>
|
|
<font>led</font>
|
|
<point-size>6.5</point-size>
|
|
<color>
|
|
<red>1.0</red>
|
|
<green>0.5</green>
|
|
<blue>0.0</blue>
|
|
</color>
|
|
<chunks>
|
|
<chunk>
|
|
<type>number-value</type>
|
|
<property alias="../../../../../params/nav-freq-selected-prop"/>
|
|
<format>%.2f</format>
|
|
</chunk>
|
|
<chunk>
|
|
<type>number-value</type>
|
|
<property alias="../../../../../params/nav-freq-standby-prop"/>
|
|
<format>%9.2f</format>
|
|
</chunk>
|
|
</chunks>
|
|
<transformations>
|
|
<transformation>
|
|
<type>x-shift</type>
|
|
<offset>10</offset>
|
|
</transformation>
|
|
<transformation>
|
|
<type>y-shift</type>
|
|
<offset>18</offset>
|
|
</transformation>
|
|
</transformations>
|
|
</layer>
|
|
|
|
<layer>
|
|
<name>com frequencies</name>
|
|
<condition>
|
|
<greater-than>
|
|
<property alias="../../../../../params/nav-com-pwr-volts-prop"/>
|
|
<value>8.0</value>
|
|
</greater-than>
|
|
</condition>
|
|
<type>text</type>
|
|
<font>led</font>
|
|
<point-size>6.5</point-size>
|
|
<color>
|
|
<red>1.0</red>
|
|
<green>0.5</green>
|
|
<blue>0.0</blue>
|
|
</color>
|
|
<chunks>
|
|
<chunk>
|
|
<type>number-value</type>
|
|
<property alias="../../../../../params/comm-freq-selected-prop"/>
|
|
<scale>0.999992</scale>
|
|
<!--The above is to ensure that 25kHz increments with an undisplayed last 0.005 are always
|
|
rounded down as occurs in real life-->
|
|
<format>%.2f</format>
|
|
</chunk>
|
|
<chunk>
|
|
<type>number-value</type>
|
|
<property alias="../../../../../params/comm-freq-standby-prop"/>
|
|
<scale>0.999992</scale>
|
|
<format>%9.2f</format>
|
|
</chunk>
|
|
</chunks>
|
|
<transformations>
|
|
<transformation>
|
|
<type>x-shift</type>
|
|
<offset>-118</offset>
|
|
</transformation>
|
|
<transformation>
|
|
<type>y-shift</type>
|
|
<offset>18</offset>
|
|
</transformation>
|
|
</transformations>
|
|
</layer>
|
|
|
|
<layer>
|
|
<name>morse ident status</name>
|
|
<condition>
|
|
<equals>
|
|
<property alias="../../../../../params/nav-morse-ident-toggle-prop"/>
|
|
<value>true</value>
|
|
</equals>
|
|
</condition>
|
|
<type>text</type>
|
|
<point-size>6</point-size>
|
|
<color>
|
|
<red>1.0</red>
|
|
<green>0.5</green>
|
|
<blue>0.0</blue>
|
|
</color>
|
|
<chunks>
|
|
<chunk>
|
|
<type>literal</type>
|
|
<text>ID</text>
|
|
</chunk>
|
|
</chunks>
|
|
<transformations>
|
|
<transformation>
|
|
<type>x-shift</type>
|
|
<offset>10</offset>
|
|
</transformation>
|
|
<transformation>
|
|
<type>y-shift</type>
|
|
<offset>8</offset>
|
|
</transformation>
|
|
</transformations>
|
|
</layer>
|
|
|
|
<layer>
|
|
<name>ident knob pointer</name>
|
|
<texture>
|
|
<path>Aircraft/Instruments/Textures/bendix-kx155.rgb</path>
|
|
<x1>0.1</x1>
|
|
<x2>0.2</x2>
|
|
<y1>0.29298675</y1>
|
|
<y2>0.3078125</y2>
|
|
</texture>
|
|
<w>7</w>
|
|
<h>4</h>
|
|
<transformations>
|
|
<transformation>
|
|
<type>x-shift</type>
|
|
<offset>29.5</offset>
|
|
</transformation>
|
|
<transformation>
|
|
<type>y-shift</type>
|
|
<offset>-27</offset>
|
|
</transformation>
|
|
<transformation>
|
|
<type>rotation</type>
|
|
<property alias="../../../../../params/nav-morse-id-volume-prop"/>
|
|
<min>0</min>
|
|
<max>1</max>
|
|
<scale>180</scale>
|
|
<offset>-60</offset>
|
|
</transformation>
|
|
<transformation>
|
|
<type>x-shift</type>
|
|
<offset>-2</offset>
|
|
</transformation>
|
|
</transformations>
|
|
</layer>
|
|
|
|
</layers>
|
|
|
|
<actions>
|
|
|
|
<action>
|
|
<name>small nav frequency decrease</name>
|
|
<button>0</button>
|
|
<x>86</x>
|
|
<y>-24</y>
|
|
<w>12</w>
|
|
<h>18</h>
|
|
<binding>
|
|
<command>property-adjust</command>
|
|
<property alias="../../../../params/nav-freq-standby-prop"/>
|
|
<step>-0.05</step>
|
|
<min>108.0</min>
|
|
<max>118.0</max>
|
|
<resolution>0.05</resolution>
|
|
<wrap>1</wrap>
|
|
</binding>
|
|
</action>
|
|
|
|
<action>
|
|
<name>large nav frequency decrease</name>
|
|
<button>1</button>
|
|
<x>86</x>
|
|
<y>-24</y>
|
|
<w>12</w>
|
|
<h>18</h>
|
|
<binding>
|
|
<command>property-adjust</command>
|
|
<property alias="../../../../params/nav-freq-standby-prop"/>
|
|
<step>-0.5</step>
|
|
<min>108.0</min>
|
|
<max>118.0</max>
|
|
<resolution>0.05</resolution>
|
|
<wrap>1</wrap>
|
|
</binding>
|
|
</action>
|
|
|
|
<action>
|
|
<name>small nav frequency increase</name>
|
|
<button>0</button>
|
|
<x>99</x>
|
|
<y>-24</y>
|
|
<w>12</w>
|
|
<h>18</h>
|
|
<binding>
|
|
<command>property-adjust</command>
|
|
<property alias="../../../../params/nav-freq-standby-prop"/>
|
|
<step>0.05</step>
|
|
<min>108.0</min>
|
|
<max>118.0</max>
|
|
<resolution>0.05</resolution>
|
|
<wrap>1</wrap>
|
|
</binding>
|
|
</action>
|
|
|
|
<action>
|
|
<name>large nav frequency increase</name>
|
|
<button>1</button>
|
|
<x>99</x>
|
|
<y>-24</y>
|
|
<w>12</w>
|
|
<h>18</h>
|
|
<binding>
|
|
<command>property-adjust</command>
|
|
<property alias="../../../../params/nav-freq-standby-prop"/>
|
|
<step>0.5</step>
|
|
<min>108.0</min>
|
|
<max>118.0</max>
|
|
<resolution>0.05</resolution>
|
|
<wrap>1</wrap>
|
|
</binding>
|
|
</action>
|
|
|
|
|
|
<action>
|
|
<name>small com frequency decrease</name>
|
|
<button>0</button>
|
|
<x>-48</x>
|
|
<y>-29</y>
|
|
<w>12</w>
|
|
<h>23</h>
|
|
<binding>
|
|
<command>property-adjust</command>
|
|
<property alias="../../../../params/comm-freq-standby-prop"/>
|
|
<step>-0.025</step>
|
|
<min>118.0</min>
|
|
<max>140.0</max>
|
|
<resolution>0.025</resolution>
|
|
<wrap>1</wrap>
|
|
</binding>
|
|
</action>
|
|
|
|
<action>
|
|
<name>large com frequency decrease</name>
|
|
<button>1</button>
|
|
<x>-48</x>
|
|
<y>-29</y>
|
|
<w>12</w>
|
|
<h>23</h>
|
|
<binding>
|
|
<command>property-adjust</command>
|
|
<property alias="../../../../params/comm-freq-standby-prop"/>
|
|
<step>-1.0</step>
|
|
<min>118.0</min>
|
|
<max>140.0</max>
|
|
<resolution>0.025</resolution>
|
|
<wrap>1</wrap>
|
|
</binding>
|
|
</action>
|
|
|
|
<action>
|
|
<name>small com frequency increase</name>
|
|
<button>0</button>
|
|
<x>-35</x>
|
|
<y>-29</y>
|
|
<w>12</w>
|
|
<h>23</h>
|
|
<binding>
|
|
<command>property-adjust</command>
|
|
<property alias="../../../../params/comm-freq-standby-prop"/>
|
|
<step>0.025</step>
|
|
<min>118.0</min>
|
|
<max>140.0</max>
|
|
<resolution>0.025</resolution>
|
|
<wrap>1</wrap>
|
|
</binding>
|
|
</action>
|
|
|
|
<action>
|
|
<name>large com frequency increase</name>
|
|
<button>1</button>
|
|
<x>-35</x>
|
|
<y>-29</y>
|
|
<w>12</w>
|
|
<h>23</h>
|
|
<binding>
|
|
<command>property-adjust</command>
|
|
<property alias="../../../../params/comm-freq-standby-prop"/>
|
|
<step>1.0</step>
|
|
<min>118.0</min>
|
|
<max>140.0</max>
|
|
<resolution>0.025</resolution>
|
|
<wrap>1</wrap>
|
|
</binding>
|
|
</action>
|
|
|
|
|
|
<action>
|
|
<name>swap nav frequencies</name>
|
|
<button>0</button>
|
|
<x>48</x>
|
|
<y>-9</y>
|
|
<w>18</w>
|
|
<h>11</h>
|
|
<binding>
|
|
<command>property-swap</command>
|
|
<property alias="../../../../params/nav-freq-selected-prop"/>
|
|
<property alias="../../../../params/nav-freq-standby-prop"/>
|
|
</binding>
|
|
</action>
|
|
|
|
<action>
|
|
<name>swap com frequencies</name>
|
|
<button>0</button>
|
|
<x>-85</x>
|
|
<y>-9</y>
|
|
<w>18</w>
|
|
<h>11</h>
|
|
<binding>
|
|
<command>property-swap</command>
|
|
<property alias="../../../../params/comm-freq-selected-prop"/>
|
|
<property alias="../../../../params/comm-freq-standby-prop"/>
|
|
</binding>
|
|
</action>
|
|
|
|
|
|
<action>
|
|
<name>ident volume increase</name>
|
|
<button>0</button>
|
|
<x>33</x>
|
|
<y>-36</y>
|
|
<w>7</w>
|
|
<h>14</h>
|
|
<binding>
|
|
<command>property-adjust</command>
|
|
<property alias="../../../../params/nav-morse-id-volume-prop"/>
|
|
<step>0.5</step>
|
|
<min>0</min>
|
|
<max>2</max>
|
|
</binding>
|
|
</action>
|
|
|
|
<action>
|
|
<name>ident volume decrease</name>
|
|
<button>0</button>
|
|
<x>24</x>
|
|
<y>-36</y>
|
|
<w>7</w>
|
|
<h>14</h>
|
|
<binding>
|
|
<command>property-adjust</command>
|
|
<property alias="../../../../params/nav-morse-id-volume-prop"/>
|
|
<step>-0.5</step>
|
|
<min>0</min>
|
|
<max>2</max>
|
|
</binding>
|
|
</action>
|
|
|
|
<action>
|
|
<name>ident volume on/off</name>
|
|
<button>1</button>
|
|
<x>24</x>
|
|
<y>-36</y>
|
|
<w>14</w>
|
|
<h>14</h>
|
|
<binding>
|
|
<command>property-toggle</command>
|
|
<property alias="../../../../params/nav-morse-ident-toggle-prop"/>
|
|
</binding>
|
|
</action>
|
|
|
|
</actions>
|
|
|
|
</PropertyList>
|