# Copyright 2020 Benedikt Wolf
# with parts by Gilberto Agonstinho, WooT, Joshau Davidsonm, Colin Geniet
# This file is part of FlightGear.
#
# FlightGear is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# FlightGear is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with FlightGear. If not, see <http://www.gnu.org/licenses/>.
To install this instrument into your aircraft, you need to do the following:
1. Enable a second altimeter (<altimeter n="1">) module through the aircraft's instrumentation.xml (in case a custom one is used).
Make sure instrumentation/altimeter[1]/serviceable is set to true via your -set.xml file.
2. Add S3.nas to your aircraft's list of included nasal files:
<nasal>
...
<s3>
<file>Aircraft/Instruments-3d/glider/vario/S3/S3.nas</file>
</s3>
...
</nasal>
** Note that it is important to put the file into <s3></s3> tags, as the animation xml may in the future reference the instrument by that name
3. Add the model to your aircraft:
<model>
<path>Aircraft/Instruments-3d/glider/vario/S3/S3.xml</path>
...
</model>
4. If you are using a custom electric system, make sure the vario is supplied at /systems/electrical/outputs/S3 when appropriate
5. Add sound effects for this vario, e.g. by using the block below and adjusting it to fit:
<variometer-up>
<name>variometer-up</name>
<mode>looped</mode>
<path>Aircraft/Instruments-3d/glider/vario/ilec-sc7/vario.wav</path>
<condition>
<and>
<greater-than>
<property>/instrumentation/s3/te-reading-mps</property>
<value>0.01</value>
</greater-than>
<greater-than-equals>
<property>/systems/electrical/outputs/s3</property>
<value>9</value>
</greater-than-equals>
<equals>
<property>/instrumentation/s3/start</property>
<value>1.0</value>
</equals>
</and>
</condition>
<pitch>
<property>/instrumentation/s3/sound-pitch</property>
<offset>0</offset>
</pitch>
<volume>
<property>/instrumentation/s3/volume</property>
<factor>1</factor>
<max>1</max>
</volume>
<!-- Put the position of your variometer loudspeaker here -->
<position>
<x>-3.35</x>
<y>0</y>
<z>0.7</z>
</position>
<reference-dist>0.5</reference-dist>
<max-dist>2.0</max-dist>
</variometer-up>
<variometer-down>
<name>variometer-down</name>
<mode>looped</mode>
<path>Aircraft/Instruments-3d/glider/vario/ilec-sc7/vario2.wav</path>
<condition>
<and>
<greater-than>
<property>/instrumentation/s3/te-reading-mps</property>
<value>-10.00</value>
</greater-than>
<less-than>
<property>/instrumentation/s3/te-reading-mps</property>
<value>-0.01</value>
</less-than>
<greater-than-equals>
<property>/systems/electrical/outputs/S3</property>
<value>9</value>
</greater-than-equals>
<equals>
<property>/instrumentation/s3/start</property>
<value>1.0</value>
</equals>
</and>
</condition>
<pitch>
<property>/instrumentation/s3/sound-pitch</property>
<offset>0</offset>
</pitch>
<volume>
<property>/instrumentation/s3/volume</property>
<factor>1</factor>
<max>1</max>
</volume>
<!-- Put the position of your variometer loudspeaker here -->
<position>
<x>-3.35</x>
<y>0</y>
<z>0.7</z>
</position>
<reference-dist>0.5</reference-dist>
<max-dist>2.0</max-dist>
</variometer-down>
## Please report any bugs, issues and improvements either to the mailing list of FlightGear forum so they can be fixed/included in the shared version of this instrument
