02b4b4a3f0
Here're some updates for some of the instruments, the TSR2 and the B52. The instruments are just parameterised/non-specific versions of the engine and fuel gauges. The old gauges will still be used by the a10s and the sea hawks until I get them done. There're a couple of tweaks to the tsr2 yasim config and amendments to the model file to change the angle at which the airbrakes operate, correct the direction that the nose gear retracts/extends and to rotate the main-gear carts during retraction/extention. There're also new panels, using the new instruments. The b52 yasim config has some big changes due to finding some more info i.e. wing incidence of 6 degrees, fuel capacities and aileron changes (removed from G & H versions!). It's now based on an 'F' model and I've put some comments in the yasim config about it. The b52-readme.txt includes a suggested method on getting airborne;). I've included an amended model - B52-F.3ds, which is the default in the new model file, and a couple of panels. I'm quite pleased with the b52 - the take-offs resemble the photographs I've seen and I think I've got reasonable values where I've had to guess at stuff, but the results from the yasim solver look as through the model is approaching the limits of acceptability for yasim. By this I mean that the model is probably a bit dodgy, not that the yasim solver is limited.
87 lines
2.1 KiB
XML
Executable file
87 lines
2.1 KiB
XML
Executable file
<?xml version="1.0"?>
|
|
<!--
|
|
************************************************************************
|
|
B52-H set file.
|
|
|
|
2002-12-17 Lee Elliott leee-fgfs@spatial.freeserve.co.uk
|
|
************************************************************************
|
|
-->
|
|
|
|
<PropertyList>
|
|
<sim>
|
|
<flight-model>yasim</flight-model>
|
|
<aero>b52-yasim</aero>
|
|
<fuel-fraction>1.0</fuel-fraction>
|
|
|
|
<sound>
|
|
<audible>true</audible>
|
|
<path>Aircraft/a4/a4-sound.xml</path>
|
|
</sound>
|
|
|
|
<panel>
|
|
<path>Aircraft/b52/b52-vfr-panel.xml</path>
|
|
</panel>
|
|
<panel_2>
|
|
<path>Aircraft/b52/b52-mini-panel.xml</path>
|
|
</panel_2>
|
|
|
|
<hud>
|
|
<path>Huds/Default/default.xml</path>
|
|
<visibility>true</visibility>
|
|
</hud>
|
|
|
|
<model>
|
|
<path>Aircraft/b52/b52-model.xml</path>
|
|
</model>
|
|
<view>
|
|
<internal archive="y">false</internal>
|
|
<config> -->
|
|
<!-- x/y/z == right/up/back -->
|
|
<x-offset-m archive="y">-1.0</x-offset-m>
|
|
<y-offset-m archive="y">1.5</y-offset-m>
|
|
<z-offset-m archive="y">-28</z-offset-m>
|
|
</config>
|
|
</view>
|
|
|
|
<view n="1">
|
|
<config>
|
|
<!-- big plane, so extend chase view offset a bit -->
|
|
<z-offset-m type="double" archive="y">-100.0</z-offset-m>
|
|
</config>
|
|
|
|
</view>
|
|
|
|
</sim>
|
|
|
|
<controls>
|
|
<elevator-trim type="float">-0.14</elevator-trim>
|
|
</controls>
|
|
|
|
<autopilot>
|
|
<config>
|
|
|
|
<min-climb-speed-kt type="float">110.0</min-climb-speed-kt>
|
|
<best-climb-speed-kt type="float">450.0</best-climb-speed-kt>
|
|
|
|
<target-climb-rate-fpm type="float">3000.0</target-climb-rate-fpm>
|
|
<target-descent-rate-fpm type="float">4000.0</target-descent-rate-fpm>
|
|
|
|
<elevator-adj-factor type="float">1600.0</elevator-adj-factor>
|
|
|
|
<integral-contribution type="float">0.005</integral-contribution>
|
|
|
|
<max-aileron type="float">1.0</max-aileron>
|
|
<max-roll-deg type="float">40.0</max-roll-deg>
|
|
|
|
<roll-out-deg type="float">18.0</roll-out-deg>
|
|
<roll-out-smooth-deg type="float">20.0</roll-out-smooth-deg>
|
|
|
|
<zero-pitch-throttle type="float">0.5</zero-pitch-throttle>
|
|
<zero-pitch-trim-full-throttle type="float">0.001</zero-pitch-trim-full-throttle>
|
|
|
|
</config>
|
|
</autopilot>
|
|
|
|
</PropertyList>
|
|
|
|
|