1
0
Fork 0
fgdata/Aircraft-yasim/747.xml

98 lines
No EOL
3.7 KiB
XML

<airplane mass="400000">
<!-- Approach configuration -->
<approach speed="136" aoa="7">
<control axis="/controls/throttle[0]" value="0.2"/>
<control axis="/controls/throttle[1]" value="0.2"/>
<control axis="/controls/flaps" value="1.0"/>
<control axis="/controls/slats" value="1.0"/>
</approach>
<!-- Cruise configuration -->
<cruise speed="487" alt="41000">
<control axis="/controls/throttle[0]" value="1.0"/>
<control axis="/controls/throttle[1]" value="1.0"/>
<control axis="/controls/flaps" value="0.0"/>
</cruise>
<cockpit x="-5.42" y="1.81" z="15.06"/>
<fuselage ax="0" ay="0" az="0" bx="-69.86" by="0.00" bz="2.41"
width="6" taper="0.3" midpoint="0.2"/>
<wing x="-26.50" y="3.01" z="-1.45" length="33.72" chord="13.25" sweep="33"
taper=".27" dihedral="7" camber="0.1">
<stall aoa="15" width="2" peak="1.5"/>
<flap0 start="0" end=".56" lift="1.8" drag="3"/>
<flap1 start=".64" end=".88" lift="1.3" drag="1.5"/>
<slat start="0" end="1" aoa="2" drag="1.1"/>
<spoiler start="0.2" end="0.6" lift="0.3" drag="2.0"/>
<control axis="/controls/flaps" output="FLAP0"/>
<control axis="/controls/aileron" output="FLAP1" split="true"/>
<control axis="/controls/aileron-trim" output="FLAP1" split="true"/>
<control axis="/controls/slats" output="SLAT"/>
<control axis="/controls/spoilers" output="SPOILER"/>
</wing>
<hstab x="-62.63" y="1.81" z="1.81" chord="8.43" length="10.84" taper=".29"
sweep="28" dihedral="7">
<stall aoa="15" width="2" peak="1.5"/>
<flap0 start="0" end="1" lift="1.5" drag="2.0"/>
<control axis="/controls/elevator" output="FLAP0"/>
<control axis="/controls/elevator-trim" output="FLAP0"/>
</hstab>
<vstab x="-62.63" y="0.00" z="3.61" chord="12.04" length="12.04" taper="0.3"
sweep="33">
<stall aoa="15" width="2" peak="1.5"/>
<flap0 start="0" end="1" lift="1.2" drag="1.3"/>
<control axis="/controls/rudder" output="FLAP0" invert="true"/>
<control axis="/controls/rudder-trim" output="FLAP0" invert="true"/>
</vstab>
<jet x="-34.93" y="16.26" z="-1.20" mass="8000" thrust="60000">
<control axis="/controls/throttle[0]" output="THROTTLE"/>
</jet>
<jet x="-26.50" y="12.65" z="-2.41" mass="8000" thrust="60000">
<control axis="/controls/throttle[0]" output="THROTTLE"/>
</jet>
<jet x="-26.50" y="-12.65" z="-2.41" mass="8000" thrust="60000">
<control axis="/controls/throttle[1]" output="THROTTLE"/>
</jet>
<jet x="-34.93" y="-16.26" z="-1.20" mass="8000" thrust="60000">
<control axis="/controls/throttle[1]" output="THROTTLE"/>
</jet>
<gear x="-5.42" y="0.00" z="-5.42" retract-time="7" compression="2"> <!-- nose -->
<control axis="/controls/rudder" output="STEER" square="true"/>
</gear>
<gear x="-29.15" y="5.42" z="-5.42" retract-time="7" compression="2"> <!-- fwd left main -->
<control axis="/controls/brakes[0]" output="BRAKE"/>
</gear>
<gear x="-31.32" y="1.81" z="-5.42" retract-time="7" compression="2"> <!-- rear left main -->
<control axis="/controls/brakes[0]" output="BRAKE"/>
</gear>
<gear x="-31.32" y="-1.81" z="-5.42" retract-time="7" compression="2"> <!-- rear right main -->
<control axis="/controls/brakes[1]" output="BRAKE"/>
</gear>
<gear x="-29.15" y="-5.42" z="-5.42" retract-time="7" compression="2"> <!-- fwd right main -->
<control axis="/controls/brakes[1]" output="BRAKE"/>
</gear>
<tank x="-26.50" y="0" z="-1.45" jet="true" capacity="128000"/>
<tank x="-30.10" y="8" z="-1.45" jet="true" capacity="128000"/>
<tank x="-30.10" y="-8" z="-1.45" jet="true" capacity="128000"/>
<ballast x="-6" y="0" z="2.4" mass="30000"/> <!-- hump -->
<ballast x="-12" y="0" z="2.4" mass="40000"/> <!-- hump -->
<ballast x="-18" y="0" z="2.4" mass="40000"/> <!-- hump -->
<ballast x="-24" y="0" z="2.4" mass="30000"/> <!-- hump -->
</airplane>