1
0
Fork 0
fgdata/Aircraft-yasim/tsr2-yasim.xml

137 lines
6.2 KiB
XML
Executable file

<!-- TSR2 yasim config. This is a hack and not an authentic
representation of the aircraft. Having said that, the
numbers, where I could find them, roughly match those of
the original aircraft. Lee Elliott.
The ailerons are a hack on this fdm - the real aircraft
use all moving tail planes for roll and this model had a
very high roll rate so they've been made relatively
ineffective and in the model/anim file the aileron surface
positions actually operate on the tailplanes.
-->
<airplane mass="54750">
<!-- Approach configuration -->
<approach speed="130" aoa="10.0">
<control-setting axis="/controls/engines/engine[0]/throttle" value="0.2"/>
<control-setting axis="/controls/engines/engine[1]/throttle" value="0.2"/>
<control-setting axis="/controls/flight/flaps" value="1.0"/>
<control-setting axis="/controls/flight/spoiler" value="0.2"/>
<control-setting axis="/controls/gear/gear-down" value="1"/>
</approach>
<!-- Cruise configuration -->
<!-- <cruise speed="840" alt="1000"> -->
<cruise speed="1197" alt="35000">
<control-setting axis="/controls/engines/engine[0]/throttle" value="1.0"/>
<control-setting axis="/controls/engines/engine[1]/throttle" value="1.0"/>
<control-setting axis="/controls/engines/engine[0]/afterburner" value="1.0"/>
<control-setting axis="/controls/engines/engine[1]/afterburner" value="1.0"/>
<control-setting axis="/controls/flight/flaps" value="0.0"/>
<control-setting axis="/controls/gear/gear-down" value="0"/>
</cruise>
<cockpit x="8.5" y="0.0" z="1.0"/>
<fuselage ax="13.0" ay="0" az="0" bx="-14.13" by="0" bz=".64"
width="2.0" taper="0.5" midpoint="0.3"/>
<wing x="-3.0" y="1.5" z="1.7" taper="0.25"
length="5.0" chord="6.0" sweep="50" dihedral="-1.0" camber="0.003">
<stall aoa="35.0" width="3" peak="1.3"/>
<flap0 start="0.0" end="0.9" lift="1.4" drag="1.2"/>
<flap1 start="0.0" end="0.4" lift="1.05" drag="1.2"/>
<spoiler start="0.54" end="0.86" lift="0.0" drag="20.0"/>
<control-input axis="/controls/flight/flaps" control="FLAP0"/>
<control-input axis="/controls/flight/aileron" control="FLAP1" split="true"/>
<control-input axis="/controls/flight/aileron-trim" control="FLAP1" split="true"/>
<control-input axis="/controls/flight/spoilers" control="SPOILER"/>
<control-output control="FLAP0" prop="/surface-positions/flap-pos-norm"/>
<control-output control="FLAP1" side="left"
prop="/surface-positions/left-aileron-pos-norm"/>
<control-output control="FLAP1" side="right"
prop="/surface-positions/right-aileron-pos-norm"/>
<control-output control="SPOILER" side="left"
prop="/surface-positions/left-spoiler-pos-norm"/>
<control-output control="SPOILER" side="right"
prop="/surface-positions/right-spoiler-pos-norm"/>
<control-speed control="FLAP0" transition-time="5"/>
<control-speed control="FLAP1" transition-time="0.5"/>
<control-speed control="SPOILER" transition-time="0.5"/>
</wing>
<hstab x="-10.0" y="1.0" z="0.5" taper=".2" effectiveness="2.0"
length="3.0" chord="4.0" sweep="55" dihedral="0.0">
<stall aoa="35.0" width="3" peak="1.5"/>
<flap0 start="0" end="1" lift="1.4" drag="1.3"/>
<control-input axis="/controls/flight/elevator" control="FLAP0"/>
<control-input axis="/controls/flight/elevator-trim" control="FLAP0"/>
<control-output control="FLAP0" prop="/surface-positions/elevator-pos-norm"/>
<control-speed control="FLAP0" transition-time="0.5"/>
</hstab>
<vstab x="-10.0" y="0" z="1.38" taper=".176" effectiveness="1.0"
length="4.5" chord="4.0" sweep="50">
<stall aoa="28.0" width="3" peak="1.5"/>
<flap0 start="0" end="1" lift="1.15" drag="1.3"/>
<control-input axis="/controls/flight/rudder" control="FLAP0" invert="true"/>
<control-output control="FLAP0" prop="/surface-positions/rudder-pos-norm"/>
</vstab>
<!-- nose -->
<gear x="3.0" y="0" z="-2.0" retract-time="7" compression="0.8">
<control-input axis="/controls/flight/rudder" control="STEER" square="true"/>
<control-input axis="/controls/gear/gear-down" control="EXTEND"/>
<control-speed control="EXTEND" transition-time="7"/>
<control-output control="EXTEND" prop="/gear/gear/position-norm"/>
</gear>
<!-- left main -->
<gear x="-4.0" y="2.5" z="-2.0" retract-time="7" compression="0.8">
<control-input axis="/controls/gear/wheel[0]/brake" control="BRAKE"/>
<control-input axis="/controls/gear/gear-down" control="EXTEND"/>
<control-speed control="EXTEND" transition-time="7"/>
<control-output control="EXTEND" prop="/gear/gear[0]/position-norm"/>
</gear>
<!-- right main -->
<gear x="-4.0" y="-2.5" z="-2.0" retract-time="7" compression="0.8">
<control-input axis="/controls/gear/wheel[1]/brake" control="BRAKE"/>
<control-input axis="/controls/gear/gear-down" control="EXTEND"/>
<control-speed control="EXTEND" transition-time="7"/>
<control-output control="EXTEND" prop="/gear/gear[1]/position-norm"/>
</gear>
<!-- Canopy -->
<gear x="3.0" y="0.0" z="0.6" retract-time="7" compression="0.6">
<control-input axis="/controls/gear/parking-brake" control="EXTEND"/>
<control-speed control="EXTEND" transition-time="10"/>
<control-output control="EXTEND" prop="/canopy/position-norm"/>
</gear>
<jet x="-8.0" y="-1.0" z="0.4" mass="4000" thrust="16600" afterburner="30600">
<!-- <jet x="-22.0" y="-1.0" z=".44" mass="4000" thrust="30600"> -->
<control-input axis="/controls/engines/engine[0]/throttle" control="THROTTLE"/>
<control-input axis="/controls/engines/engine[0]/afterburner" control="REHEAT"/>
</jet>
<jet x="-8.0" y="1.0" z="0.4" mass="4000" thrust="16600" afterburner="30600">
<!-- <jet x="-22.0" y="1.0" z=".44" mass="4000" thrust="30600"> -->
<control-input axis="/controls/engines/engine[1]/throttle" control="THROTTLE"/>
<control-input axis="/controls/engines/engine[1]/afterburner" control="REHEAT"/>
</jet>
<tank x="-2.0" y="0.0" z="0.5" jet="true" capacity="13000"/>
<tank x="-3.0" y="2.5" z="1.7" jet="true" capacity="11000"/>
<tank x="-3.0" y="-2.5" z="1.7" jet="true" capacity="11000"/>
<ballast x="8.5" y="0" z="0" mass="3000"/> <!-- Cockpit -->
<ballast x="4.0" y="0" z="0" mass="3000"/> <!-- avionics -->
<ballast x="-6.0" y="0" z="0" mass="100"/> <!-- Trim ballast -->
</airplane>