546 lines
No EOL
30 KiB
TeX
546 lines
No EOL
30 KiB
TeX
\emph{}%%
|
|
%% getstart.tex -- Flight Gear documentation: Installation and Getting Started
|
|
%% Chapter file
|
|
%%
|
|
%% Written by Michael Basler, started September 1998.
|
|
%%
|
|
%% Copyright (C) 2002 Michael Basler (pmb@epost.de)
|
|
%%
|
|
%%
|
|
%% This program is free software; you can redistribute it and/or
|
|
%% modify it under the terms of the GNU General Public License as
|
|
%% published by the Free Software Foundation; either version 2 of the
|
|
%% License, or (at your option) any later version.
|
|
%%
|
|
%% This program is distributed in the hope that it will be useful, but
|
|
%% WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
%% General Public License for more details.
|
|
%%
|
|
%% You should have received a copy of the GNU General Public License
|
|
%% along with this program; if not, write to the Free Software
|
|
%% Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
%%
|
|
%% $Id: flight.tex,v 0.5 0.6 2002/09/09 michael
|
|
%% (Log is kept at end of this file)
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\chapter{In-flight: All about instruments, keystrokes and menus\label{flight}}
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\markboth{\thechapter.\hspace*{1mm} FLIGHT}{\thesection\hspace*{1mm} KEYBOARD CONTROLS}
|
|
|
|
The following is a description of the main systems for controlling the
|
|
program and piloting the plane: Historically, \Index{keyboard controls} were developed
|
|
first, and you can still control most of the simulator via the keyboard alone. Later on,
|
|
they were supplemented by several menu entries, making the interface more accessible,
|
|
particularly for beginners, and providing additional functionality.
|
|
|
|
For getting a real feeling of flight, you should definitely consider getting a \Index{joystick} or -- preferred -- a \Index{yoke} plus \Index{rudder pedals}. In any case, you
|
|
can specify your device of choice for control via the \texttt{-$ $-control-mode} option,
|
|
i.e. select joystick, \Index{keyboard}, \Index{mouse}. The default setting is joystick.
|
|
Concerning instruments, there are again two alternatives: You can use the panel or the
|
|
HUD.
|
|
|
|
A short leaflet based on this chapter can be found at
|
|
\medskip
|
|
|
|
\web{http://www.flightgear.org/Docs/InstallGuide/FGShortRef.html}.
|
|
\medskip
|
|
|
|
\noindent
|
|
A version of this leaflet can also be opened via \FlightGear{}'s help menu.
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\section{Starting the engine}\index{engine!starting}
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
|
|
Depending on your situation, when you start the simulator the \Index{engine}s may be on or off. When they are on you just can go on with the start. When they are off, you have to start them first. The \Index{ignition switch} for starting the engine is situated in the lower left corner of the panel. It is shown in Fig.\,4.
|
|
\medskip
|
|
|
|
\centerline{\fbox{
|
|
\includegraphics[clip,width=12.5cm]{magnet2}
|
|
}}
|
|
|
|
\smallskip
|
|
\noindent
|
|
Fig.\,4: \textit{The ignition switch.}
|
|
\medskip
|
|
|
|
It has five positions: ''OFF'', ''L'', ''R'', ''BOTH'', and ''START''. The extreme right position is for starting the engine. For starting the engine, put it onto the position ''BOTH'' using the mouse first.
|
|
|
|
Keep in mind that the \Index{mixture lever} has to be at 100\,\% (all the way in) for starting the engine -- otherwise you will fail. In addition, advance the \Index{throttle} to about 25\,\%.
|
|
|
|
Operate the \Index{starter} using the SPACE key now. When pressing the SPACE key you will observe the ignition switch to change to the position ''START'' and the engine to start after a few seconds. Afterwards you can bring the throttle back to idle (all the way out).
|
|
|
|
In addition, have a look if the \Index{parking brake}s are on (red field lit). If so, press the ''B'' button to release them.
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\section{Keyboard controls}\index{keyboard controls}
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
|
|
While \Index{joystick}s or \Index{yoke}s are supported as are \Index{rudder} pedals, you
|
|
can fly \FlightGear{} using the keyboard alone. For proper control of the plane during
|
|
flight via the keyboard (i) the \texttt{\Index{NumLock}} key must be switched on (ii) the
|
|
\FlightGear{} window must have focus (if not, click with the mouse onto the graphics
|
|
window). Several of the keyboard controls might be helpful even in case you use a
|
|
joystick or yoke.
|
|
|
|
After activating \texttt{NumLock} the following main \Index{keyboard controls} for driving the plane should work:
|
|
\eject
|
|
|
|
\noindent
|
|
Tab.\,2: \textit{Main \Index{keyboard controls} for \FlightGear{} on the numeric keypad with
|
|
activated \texttt{NumLock} key:}.
|
|
\medskip
|
|
|
|
\centerline{\input{tab2}}
|
|
\vskip5mm
|
|
|
|
For changing views you have to de-activate \texttt{NumLock}. Now \texttt{Shift} +
|
|
$<$\texttt{Numeric Keypad Key}$>$ changes the view as follows:
|
|
\medskip
|
|
|
|
\noindent
|
|
Tab.\,3: \textit{View directions\index{view directions}
|
|
accessible after de-activating \texttt{NumLock} on the numeric keypad.}
|
|
\medskip
|
|
|
|
\centerline{\input{tab3}}
|
|
\vskip5mm
|
|
|
|
Besides, there are several more options for adapting display on screen:
|
|
\vfill
|
|
\eject
|
|
|
|
\noindent
|
|
Tab.\,4: \textit{Display options\index{display options}}
|
|
\medskip
|
|
|
|
\centerline{\input{tab4}}
|
|
\vskip5mm
|
|
|
|
The \Index{autopilot} is controlled via the following keys:
|
|
\medskip
|
|
|
|
\noindent
|
|
Tab.\,5: \textit{Autopilot and related controls.\index{autopilot controls}}
|
|
\medskip
|
|
|
|
\centerline{\input{tab5}}
|
|
\medskip
|
|
|
|
\noindent Ctrl + T is especially interesting as it makes your little Cessna behave
|
|
like a cruise missile. Ctrl + U might be handy in case you feel you're just about to
|
|
crash. (Shouldn't real planes sport such a key, too?)
|
|
|
|
In case the \Index{autopilot} is enabled, some of the numeric keypad keys get a special
|
|
meaning:
|
|
|
|
\noindent
|
|
Tab.\,6: \textit{Special action of keys, if autopilot is enabled.\index{autopilot controls}}
|
|
\medskip
|
|
|
|
\centerline{\input{tab6}}
|
|
\medskip
|
|
|
|
There are several keys for starting and controlling the engine \index{engine controls}:
|
|
|
|
\noindent
|
|
Tab.\,7: \textit{Engine control keys}
|
|
\medskip
|
|
|
|
\centerline{\input{tab7}}
|
|
\medskip
|
|
|
|
Beside these basic keys there are miscellaneous keys for special actions; some of these you'll probably not want to try during your first flight:
|
|
\vfill
|
|
\eject
|
|
|
|
\noindent Tab.\,8: \textit{Miscellaneous keyboard controls.\index{keyboard controls! miscellaneous}}
|
|
\medskip
|
|
|
|
\centerline{\input{tab8}}
|
|
\medskip
|
|
|
|
\noindent
|
|
Note: If you have difficulty processing the \Index{screenshot} \texttt{fgfs-screen.ppm}
|
|
on a windows machine, just recall that simply pressing the ''Print'' key copies the
|
|
screen to the clipboard, from which you can paste it into any graphics program.
|
|
|
|
Finally: Starting from \FlightGear{} 0.7.7 these key bindings\index{key
|
|
bindings!configuration} are no longer hard coded, but user-adjustable. You can check and change these setting via the file \texttt{keyboard.xml}\index{keyboard.xml} to
|
|
be found in the main \FlightGear{} directory. This is a human readable plain ASCII file.
|
|
Although it's perhaps not the best idea for beginners to start just with modifying this
|
|
file, more advanced users will find it useful to change key bindings according to what
|
|
they like (or, perhaps, know from other simulators).
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\section{Menu entries}\index{menu entries}
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
|
|
By default, the menu is disabled after starting the simulator (you don't see a menu in a real plane, do you?). You can turn it on either using the toggle F10 or just by moving the mouse pointer to the top left corner of the display. In case you want the menu to disappear just hit F10 again or move the mouse to the bottom of the screen.
|
|
|
|
At present, the menu provides the following functions.
|
|
|
|
\begin{itemize}
|
|
\item \textbf{File}
|
|
\begin{itemize}
|
|
\item \textbf{Load flight} Loads\index{load flight} the current flight, by default from \texttt{fgfs.sav}.
|
|
\item \textbf{Save flight} Saves\index{save flight} the current flight, by default to \texttt{fgfs.sav}.
|
|
\item \textbf{Reset} Resets\index{reset flight} you to the selected starting position. Comes handy in case you got lost or something went wrong.
|
|
\item \textbf{Hires Snap Shot} Saves a high resolution Screen Shot\index{screenshot} under\\ \texttt{fgfs-screen-XXX.ppm}.
|
|
\item \textbf{Snap Shot} Saves a normal resolution Screen Shot\index{screenshot} under\\ \texttt{fgfs-screen-XXX.ppm}.
|
|
\item \textbf{Print} Prints screen shot (Linux only).
|
|
\item \textbf{Exit} Exits\index{exit} the program.
|
|
\end{itemize}
|
|
|
|
\item \textbf{View}\index{view}
|
|
\begin{itemize}
|
|
\item \textbf{Properties} Provides access to numerous properties managed via \FlightGear{}'s \Index{property manager}. This is actually a quite powerful tool allowing to set all the values in the property tree. Obviously, this is a good place to crash the program by entering a ''bad'' value.
|
|
\item \textbf{HUD Alpha} Toggles \Index{antialiasing} of HUD lines on/off.
|
|
\item \textbf{Pilot Offset} Allows setting a different viewpoint (useful for R/C flying).\index{viewpoint}
|
|
\item \textbf{Toggle Panel} Toggles instrument \Index{panel} on/off.
|
|
\end{itemize}
|
|
|
|
\item \textbf{Environment}
|
|
\begin{itemize}
|
|
\item \textbf{Goto Airport} Enter the \Index{airport ID}. For details on how to get the IDs
|
|
see Section \ref{aiportid}.
|
|
\end{itemize}
|
|
|
|
\item \textbf{Autopilot}\index{autopilot}
|
|
\begin{itemize}
|
|
\item \textbf{Set Heading} Sets \Index{heading} manually.
|
|
\item \textbf{Set Altitude} Sets \Index{altitude} manually.
|
|
\item \textbf{Add Waypoint} Adds \Index{waypoint} to waypoint list.
|
|
\item \textbf{Skip Current Waypoint} Self explaining.
|
|
\item \textbf{Clear Route} Clears current route.
|
|
\item \textbf{Adjust AP Settings} Allows input of several \Index{autopilot} parameters.
|
|
\item \textbf{Toggle HUD format} Toggles figures of latitude/longitude in \Index{HUD}.
|
|
\end{itemize}
|
|
|
|
\item\textbf{Network}\index{network} (supposes compile option \texttt{-$ $-with-network-olk})
|
|
\begin{itemize}
|
|
\item \textbf{Unregister for FGD} Unregister from \FlightGear{} Daemon.
|
|
\item \textbf{Register for FGD} Register for \FlightGear{} Daemon.
|
|
\item \textbf{Scan for Daemons} Scan for daemons on the net.
|
|
\item \textbf{Enter Callsign} Enter your \Index{call sign}.
|
|
\item \textbf{Toggle Display} Toggle \Index{call sign} etc. on/off.
|
|
|
|
\end{itemize}
|
|
|
|
\item \textbf{Help}\index{help}
|
|
\begin{itemize}
|
|
\item \textbf{Help} Opens your browser and displays an overview on several help options (including links to this Guide as well as to the FAQ).
|
|
\end{itemize}
|
|
\end{itemize}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\section{The Instrument Panel\index{panel}\index{instrument panel}}
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
|
|
The Cessna instrument panel is activated by default when you start \FlightGear{}$\!$, but can be
|
|
de-activated by pressing the ''P'' key. While a complete description of all the
|
|
functions of the instrument panel of a Cessna is beyond the scope of this guide, we will
|
|
at least try to outline the main \Index{flight instrument}s or \Index{gauge}s.
|
|
|
|
All panel levers and knobs can be operated with the mouse To change a control, just click with the left/middle mouse button on the corresponding knob/lever.
|
|
|
|
Let us start with the most important instruments any simulator pilot must know. In the
|
|
center of the instrument panel (Fig.\,5), in the upper row, you will find the
|
|
\Index{artificial horizon} (\Index{attitude indicator}) displaying \Index{pitch} and
|
|
\Index{bank} of your plane. It has pitch marks as well as bank marks at 10, 20, 30, 60,
|
|
and 90 degrees.
|
|
|
|
Left to the artificial horizon, you'll see the \Index{airspeed indicator}. Not only does
|
|
it provide a speed indication in knots but also several arcs showing characteristic
|
|
\Index{velocity rages} you have to consider. At first, there is a green arc indicating
|
|
the normal operating range of speed with the \Index{flaps} fully retracted. The white arc
|
|
indicates the range of speed with flaps in action. The yellow arc shows a range, which
|
|
should only be used in smooth air. The upper end of it has a red radial indicating the
|
|
speed you must never exceeded - at least as long as you won't brake your plane.
|
|
|
|
Below the airspeed indicator you can find the \Index{turn indicator}. The airplane in the
|
|
middle indicates the roll of your plane. If the left or right wing of the plane is
|
|
aligned with one of the marks, this would indicate a standard turn, i.e. a turn of 360
|
|
degrees in exactly two minutes.
|
|
|
|
Below the plane, still in the turn indicator, is the \Index{inclinometer}. It indicates
|
|
if \Index{rudder} and \Index{aileron}s are coordinated. During turns, you always have to
|
|
operate \Index{aileron} and \Index{rudder} in such a way that the ball in the tube
|
|
remains centered; otherwise the plane is skidding. A simple rule says: ''Step onto the ball'', i.e. step onto the left rudder pedal in case the ball is on the l.h.s.
|
|
\medskip
|
|
|
|
\centerline{\fbox{
|
|
\includegraphics[clip,width=12.5cm]{panel5}
|
|
}}
|
|
|
|
\smallskip
|
|
\noindent
|
|
Fig.\,5: \textit{The panel.}
|
|
\medskip
|
|
|
|
If you don't have pedals or lack the experience to handle the proper ratio between aileron/rudder automatically, you can start
|
|
\FlightGear{} with the option \texttt{-$ $-enable-auto-coordination}.\index{auto
|
|
coordination}
|
|
|
|
To the r.h.s of the artificial horizon you will find the \Index{altimeter} showing the height
|
|
above sea level (not ground!) in hundreds of feet. Below the altimeter is the
|
|
\Index{vertical speed indicator} indicating the rate of climbing or sinking of your plane
|
|
in hundreds of feet per minute. While you may find it more convenient to use then the
|
|
altimeter in cases, keep in mind that its display usually has a certain lag in time.
|
|
|
|
Further below the vertical speed indicator is the RPM (rotations per minute)
|
|
indicator\index{RPM indicator}, which displays the rotations per minute in 100 RPMs. The
|
|
green arc marks the optimum region for long-time flight.
|
|
|
|
The group of the main instruments further includes the \Index{gyro compass} being
|
|
situated below the artificial horizon. Besides this one, there is a \Index{magnetic
|
|
compass} sitting on top of the panel.
|
|
|
|
Four of these gauges being arranged in the from of a ''T'' are of special importance: The
|
|
air speed indicator, the artificial horizon, the altimeter, and the compass should be
|
|
scanned regularly during flight.
|
|
|
|
Besides these, there are several supplementary instruments. To the very left you will find the
|
|
\Index{clock}, obviously being an important tool for instance for determining turn rates.Below the clock there are several smaller gauges displaying the technical state of your engine. Certainly the most important of them is the \Index{fuel indicator} - as any pilot should know.
|
|
|
|
The \Index{ignition switch} is situated in the lower left corner of the panel (cf. Fig.\,4). It has five positions: ''OFF'', ''L'', ''R'', ''BOTH'', and ''START''. The first one is obvious. ''L'' and ''R'' do not refer to two engines (actually the Cessna does only have one) but to two magnetos being present for safety purposes. The two switch positions can be used for test puposes during preflight. During normal flight the switch should point on ''BOTH''. The extreme right position is for \index{starting the engine} using a battery-powered \Index{starter} (to be operated with the SPACE key in flight gear).
|
|
|
|
Like in most flight simulators, you actually get a bit more than in a real plane. The red field directly below the gyro compass displays the state of the \Index{brakes}, i.e., it is lit in case of the brakes being engaged. The instruments below indicate the position of your\Index{yoke}. This serves as kind of a compensation for the missing forces you feel while pushing a real \Index{yoke}. Three of the arrows correspond to the three axes of your yoke/pedal controlling nose up/down, bank left/right, rudder left/right, and throttle. (Keep in mind: They do \textbf{not} reflect the actual position of the plane!) The left vertical arrow indicates elevator trim.
|
|
|
|
The right hand side of the panel is occupied by the \Index{radio stack}. Here you find
|
|
two \Index{VOR} receivers (NAV),\index{NAV} an \Index{NDB} receiver
|
|
(\Index{ADF}) and two \Index{communication radio}s (COMM1/2)\index{COMM1}\index{COMM2} as
|
|
well as the autopilot.
|
|
|
|
The \Index{communication radio} is used for communication with \Index{air traffic
|
|
facilities}; it is just a usual radio transceiver working in a special frequency range.
|
|
The frequency is displayed in the ''COMM'' field. Usually there are two \Index{COM
|
|
transceiver}s; this way you can dial in the frequency of the next controller to contact
|
|
while still being in contact with the previous one.
|
|
|
|
The COM radio can be used to display \Index{ATIS} messages as well. For this purpose, just to dial in the ATIS frequency of the relevant airport.
|
|
|
|
The \Index{VOR} (Very High Frequency Omni-Directional Range) receiver is used for course
|
|
guidance during flight. The frequency of the sender is displayed in the ''\Index{NAV}'' field. In a sense, a VOR acts similarly to a light house permitting to display the position of the
|
|
aircraft on a radial around the sender. It transmits one omni-directional ray of radio
|
|
waves plus a second ray, the phase of which differs from the first one depending on its
|
|
direction (which may be envisaged as kind of a ''rotating'' signal). The phase difference between the two signals allows evaluating the angle of the aircraft on a 360 degrees circle
|
|
around the VOR sender, the so-called radial. This radial is then displayed on the gauges
|
|
NAV1 and NAV2, resp., left to frequency field. This way it should be clear that the VOR display, while indicating the position of the aircraft relative to the VOR sender, does not say anything about the orientation of the plane.
|
|
|
|
Below the two COM/NAV devices is an \Index{NDB} receiver called ADF (automatic direction
|
|
finder). Again there is a field displaying the frequency of the facility. The ADF can be
|
|
used for navigation, too, but contrary to the VOR does not show the position of the plane
|
|
in a radial relative to the sender but the direct heading from the aircraft to the
|
|
sender. This is displayed on the gauge below the two NAV gauges.
|
|
|
|
Above the COMM1 display you will see three LEDs in the colors blue, amber, and white
|
|
indicating the outer, middle, and, inner, resp. marker beacon.\index{marker,
|
|
outer}\index{marker, inner}\index{marker, middle} These show the distance to the runway
|
|
threshold during landing. They to not require the input of a frequency.
|
|
|
|
Below the radios you will find the \Index{autopilot}. It has five keys for WL = ''Wing-Leveler'', ''HDG'' = ''Heading'', NAV, APR = ''Glide-Slope'', and ALT = ''Altitude''. These keys when engaged hold the corresponding property.
|
|
|
|
You can change the numbers for the radios using the mouse. For this purpose, click left/right to the circular knob below the corresponding number. The corresponding switch left to this knob can be used for toggling between the active/standby frequency.
|
|
|
|
A detailed description of the workings of these instruments and their use for navigation
|
|
lies beyond this Guide; if you are interested in this exciting topic, we suggest
|
|
consulting a book on instrument flight (simulation). Besides, this would be material for
|
|
a yet to be written \FlightGear{} Flight School.
|
|
|
|
It should be noted, that you can neglect these radio instruments as long as you are strictly flying according to \Index{VFR} (\Index{visual flight rules}). For those wanting to do \Index{IFR} (\Index{instrument flight rules}) flights, it should be mentioned that \FlightGear{} includes a huge database of \Index{navaids} worldwide.
|
|
|
|
Finally, you find the \Index{throttle}, \Index{mixture}, and flap control\index{flaps} in
|
|
the lower right of the panel (recall, flaps can be set via $[$ and $]$ or just using the mouse).
|
|
|
|
As with the keyboard, the panel\index{panel!reconfiguration} can be re-configured using
|
|
configuration files. As these have to be plane specific, they can be found under the
|
|
directory of the corresponding plane. As an example, the configuration file for the
|
|
default Cessna C172 can be found at \texttt{FlightGear/Aircraft/c172/Panels} as
|
|
\texttt{c172-panel.xml}. The accompanying documentation for customizing it (i.e. shifting,
|
|
replacing etc. gauges and more) is contained in the file \texttt{README.xmlpanel}\index{README.xmlpanel} written by John Check\index{Check, John},
|
|
to be found in the source code in the directory \texttt{docs-mini}.
|
|
|
|
Since version 0.8.0, \FlightGear{} has a 3D cockpit including a 3D cockpit as an alternative to the 2D panel mentioned above (see Fig. 6). This one can be activated using the option \texttt{-$ $-aircraft=c172-3d}. Its functionality is the same as that of the 2D panel mentioned above, but it gives a much more realistic view, while instruments may be better readable in the 2D cockpit.
|
|
\medskip
|
|
|
|
\centerline{\fbox{
|
|
\includegraphics[clip,width=12.5cm]{panel3d}
|
|
}}
|
|
|
|
\smallskip
|
|
\noindent
|
|
Fig.\,6: \textit{The 3D cockpit of the Cessna 172.}
|
|
\medskip
|
|
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\section{The Head Up Display\index{head up display}}
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
|
|
At current, there are two options for reading off the main flight parameters of the
|
|
plane: One is the instrument panel already mentioned, while the other one is the
|
|
\Index{HUD} (\textbf{H}ead \textbf{U}p \textbf{D}isplay) \index{head up display}. Neither
|
|
are \Index{HUD}s used in usual general aviation planes nor in civilian ones. Rather they
|
|
belong to the equipment of modern military jets. However, some might find it easier to
|
|
fly using the HUD even with general aviation aircraft. Several \Index{Cessna} pilots
|
|
might actually love to have one, but technology is simply too expensive for implementing
|
|
HUDs in general aviation aircraft. Besides, the HUD displays several useful figures
|
|
characterizing simulator performance, not to be read off from the panel.
|
|
|
|
The \Index{HUD} shown in Fig.\,7 displays all main flight parameters of the plane. In
|
|
the center you find the \Index{pitch indicator} (in degrees) with the \Index{aileron
|
|
indicator} above and the \Index{rudder indicator} below. A corresponding scale for the
|
|
elevation\index{elevation indicator} can be found to the left of the pitch scale. On the
|
|
bottom there is a simple \Index{turn indicator}.
|
|
|
|
There are two scales at the extreme left: The inner one displays the \Index{speed} (in
|
|
kts) while the outer one indicates position of the \Index{throttle}. The Cessna 172 takes
|
|
off at around 55 kts. The two scales on the extreme r.h.s display your \Index{height},
|
|
i.\,e. the left one shows the height above ground while the right of it gives that above
|
|
zero, both being displayed in feet.
|
|
|
|
Besides this, the \Index{HUD} delivers some additions information. On the upper left you
|
|
will find date and time. Besides, \Index{latitude} and \Index{longitude}, resp., of your current position are shown on top.
|
|
|
|
You can change color of the \textbf{HUD} using the ''H'' or ''h'' key. Pressing the toggle ''i/I'' minimizes/maximizes the HUD.
|
|
|
|
\medskip
|
|
|
|
\centerline{\fbox{
|
|
\includegraphics[clip,width=12.5cm]{hud2}
|
|
}}
|
|
|
|
\smallskip
|
|
\noindent
|
|
Fig.\,7: \textit{The HUD, or Head Up Display.}
|
|
\medskip
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\section{Mouse controlled actions\index{mouse, actions}}
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
|
|
Besides just clicking the menues, your mouse has got certain valuable functions in \FlightGear{}$\!$.
|
|
|
|
|
|
There are three \Index{mouse modes}.\index{mouse} In the normal mode (pointer cursor) panel's controls can be operated with the mouse. To change a control, click with the left/middle mouse button on the corresponding knob/lever. While the left mouse button leads to small increments/decrements, the middle one makes greater ones. Clicking on the left hand side of the knob/lever decreases the value, while clicking on the right hand side increases
|
|
it.
|
|
|
|
Right clicking the mouse activates the simulator control mode (cross hair cursor). This allows control of aileron/elevator via the mouse in absence of a joystick/yoke (enable \texttt{-$ $-enable-auto-coordination} in this case). If you have a joystick you certainly will not make use of this mode
|
|
|
|
Right clicking the mouse another time activates the view control mode (arrow cursor).
|
|
This allows changing direction of view, i.e. pan and tilt the view, via the mouse.
|
|
|
|
Right clicking the mouse once more resets it into the initial state.
|
|
|
|
If you are looking for some interesting \Index{places to discover} with \FlightGear{}
|
|
(which may or may not require downloading additional scenery) you may want to check
|
|
\medskip
|
|
|
|
\web{http://www.flightgear.org/Places/}.
|
|
\medskip
|
|
|
|
\noindent
|
|
There is now a menu entry for entering directly the \Index{airport code} of the
|
|
airport you want to start from.
|
|
|
|
Finally, if you're done and are about to leave the plane, just hit the ESC key or use the
|
|
corresponding menu entry to \Index{exit} the program. It is not suggested to simply
|
|
''kill'' the simulator by clicking the text window.
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\section{Some further reading for student pilots\label{flightschoool}\index{flight schools}\index{text books}}
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
|
|
In view of that fact that there is not yet a \FlightGear{} specific flight course, here
|
|
are some useful hints to texts for those who want to learn piloting a plane.
|
|
|
|
First, there is an excellent \Index{tutorial} written by David Megginson\index{Megginson, David} -- being one of the main developers of \FlightGear{} -- on flying a basic airport circuit specifically using \FlightGear{}. This document includes a lot of screen shots, numerical material etc., and is available from
|
|
\medskip
|
|
|
|
\web{http://www.flightgear.org/Docs/Tutorials/circuit}.
|
|
\medskip
|
|
|
|
\noindent
|
|
Anyone new (and not so new) to \FlightGear{} is highly recommended to try this as a start!
|
|
|
|
Moreover, there are several more \Index{tutorial}s being not \FlightGear{} specific, but nonetheless helpful as well. First, a quite comprehensive manual of this type is the \Index{Aeronautical Information Manual}, published by the \Index{FAA}, and being online available at
|
|
\medskip
|
|
|
|
\web{http://www.faa.gov/ATPubs/AIM/}.
|
|
\medskip
|
|
|
|
\noindent
|
|
This is the Official Guide to Basic Flight Information and ATC Procedures by the FAA. It
|
|
contains a lot of information on flight rules, flight safety, navigation, and more. If
|
|
you find this a bit too hard reading, you may prefer the \Index{FAA Training Book},
|
|
\medskip
|
|
|
|
\web{http://avstop.com/AC/FlightTraingHandbook/},
|
|
\medskip
|
|
|
|
\noindent
|
|
which covers all aspects of flight, beginning with the theory of flight and the working
|
|
of airplanes, via procedures like takeoff and landing up to emergency situations. This is
|
|
an ideal reading for those who want to learn some basics on flight but don't (yet) want
|
|
to spend bucks on getting a costly paper pilot's handbook.
|
|
|
|
While the handbook mentioned above is an excellent introduction on \Index{VFR} (visual
|
|
flight rules), it does not include flying according to \Index{IFR} (instrument flight
|
|
rules). However, an excellent introduction into navigation and flight according to
|
|
Instrument Flight Rules written by Charles Wood\index{Wood, Charles} can be found at
|
|
|
|
\web{http://www.navfltsm.addr.com/}.
|
|
|
|
Another comprehensive but yet readable text is John Denker's\index{Denker, John}
|
|
''\Index{See how it flies}'', available at
|
|
\medskip
|
|
|
|
\web{http://www.monmouth.com/~jsd/how/htm/title.html}.
|
|
\medskip
|
|
|
|
\noindent
|
|
This is a real online text book, beginning with Bernoulli's principle, drag and power,
|
|
and the like, with the later chapters covering even advanced aspects of VFR as well as
|
|
IFR flying
|
|
|
|
|
|
%% Revision 0.00 1998/09/08 michael
|
|
%% Initial revision for version 0.53.
|
|
%% Revision 0.01 1998/09/20 michael
|
|
%% several extensions and corrections, added Fig.1.
|
|
%% revision 0.10 1998/10/01 michael
|
|
%% final proofreading for release
|
|
%% revision 0.11 1998/11/01 michael
|
|
%% Complete revision of keyborad controls, interesting places
|
|
%% revision 0.12 1999/03/07 michael
|
|
%% Corrected rudder key
|
|
%% revision 0.20 1999/06/04 michael
|
|
%% HUD completely rewritten, added panel section with picture, and menu section
|
|
%% updated keystrokes
|
|
%% revision 0.3 2000/04/20 michael
|
|
%% again updated and added keystrokes
|
|
%% revised menu entries
|
|
%% picture of new panel and re-written panel section
|
|
%% added mouse control section
|
|
%% Updated many keys, notably autopilot related, added two new tables
|
|
%% revision 0.4 2001/05/12 michael
|
|
%% updated/added many keystrikes, updated/added panel description
|
|
%% (radio stack etc.), new panel pic, panel before HUD now
|
|
%% short description of VOR/NDB
|
|
%% revision 0.41 2001/01/01 michael
|
|
%% added section on flight school material
|
|
%% added hints to user configurable *.xml files
|
|
%% revision 0.5 2002/01/01 michael
|
|
%% revised all changed keybindings now mostly read off of keyboard.xml
|
|
%% restructured tables more logically and put into separate files
|
|
%% for inclusion in Short Reference
|
|
%% New panel picture and revised descirption of panel according to new features
|
|
%% New HUD picture
|
|
%% revision 0.6 2002/09/05 michael
|
|
%% Several corrections/tweaks in plus renumbering of tables
|
|
%% Tweaks in menu entries
|
|
%% Added 3D cockpit picture
|
|
%% Changing numbers in radios |