457 lines
15 KiB
XML
457 lines
15 KiB
XML
<?xml version="1.0"?>
|
|
|
|
<PropertyList>
|
|
|
|
<name>Taxiing</name>
|
|
|
|
<description>
|
|
This tutorial covers moving the aircraft around on the ground, from the parking position to the run-up area.
|
|
|
|
For more information on taxiing, see Section 2-9 of the FAA Airplane Flying Handbook available at http://www.faa.gov/library/manuals/aircraft/airplane_handbook/.
|
|
</description>
|
|
|
|
<audio-dir>Tutorials/taxiing</audio-dir>
|
|
<timeofday>morning</timeofday>
|
|
<presets>
|
|
<airport-id></airport-id>
|
|
<on-ground>1</on-ground>
|
|
<altitude-ft>-9999</altitude-ft>
|
|
<latitude-deg>19.71731272</latitude-deg>
|
|
<longitude-deg>-155.0597483</longitude-deg>
|
|
<heading-deg>125</heading-deg>
|
|
<airspeed-kt>0</airspeed-kt>
|
|
<glideslope-deg>0</glideslope-deg>
|
|
<offset-azimuth-deg>0</offset-azimuth-deg>
|
|
<offset-distance-nm>0</offset-distance-nm>
|
|
<airport-requested>true</airport-requested>
|
|
<runway-requested>false</runway-requested>
|
|
<parking-requested>false</parking-requested>
|
|
</presets>
|
|
|
|
<targets>
|
|
<taxi1>
|
|
<!-- forward to taxiway
|
|
-->
|
|
<latitude-deg>19.71717163</latitude-deg>
|
|
<longitude-deg>-155.0594903</longitude-deg>
|
|
</taxi1>
|
|
<taxi2>
|
|
<!-- continue along yellow line
|
|
-->
|
|
<latitude-deg>19.720517</latitude-deg>
|
|
<longitude-deg>-155.0561934</longitude-deg>
|
|
</taxi2>
|
|
<taxi3>
|
|
<!-- stop
|
|
-->
|
|
<latitude-deg>19.72419733</latitude-deg>
|
|
<longitude-deg>-155.052821</longitude-deg>
|
|
</taxi3>
|
|
|
|
</targets>
|
|
|
|
<step>
|
|
<set>
|
|
<property>/instrumentation/adf/frequencies/selected-khz</property>
|
|
<value>332</value> <!-- PAHOA NDB -->
|
|
</set>
|
|
<set>
|
|
<property>/environment/weather-scenario</property>
|
|
<value>Fair weather</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/gear/brake-parking</property>
|
|
<value>1</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/switches/master-bat</property>
|
|
<value>true</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/switches/master-alt</property>
|
|
<value>true</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/switches/master-avionics</property>
|
|
<value>true</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/flight/flaps</property>
|
|
<value>0.0</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/flight/elevator-trim</property>
|
|
<value>0.17</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/switches/magnetos</property>
|
|
<value>3</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/engines/current-engine/throttle</property>
|
|
<value>0.2</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/engines/engine/primer</property>
|
|
<value>4</value>
|
|
</set>
|
|
<set>
|
|
<property>/sim/model/c172p/securing/chock</property>
|
|
<value>false</value>
|
|
</set>
|
|
<set>
|
|
<property>/sim/model/c172p/securing/cowl-plugs-visible</property>
|
|
<value>false</value>
|
|
</set>
|
|
<set>
|
|
<property>/sim/model/c172p/securing/tiedownL-visible</property>
|
|
<value>false</value>
|
|
</set>
|
|
<set>
|
|
<property>/sim/model/c172p/securing/tiedownR-visible</property>
|
|
<value>false</value>
|
|
</set>
|
|
<set>
|
|
<property>/sim/model/c172p/securing/tiedownT-visible</property>
|
|
<value>false</value>
|
|
</set>
|
|
<set>
|
|
<property>/sim/model/c172p/securing/pitot-cover-visible</property>
|
|
<value>false</value>
|
|
</set>
|
|
<set>
|
|
<property>/sim/model/c172p/cockpit/control-lock-placed</property>
|
|
<value>false</value>
|
|
</set>
|
|
<set>
|
|
<property>/sim/model/c172p/cockpit/control-lock-visible</property>
|
|
<value>false</value>
|
|
</set>
|
|
<nasal>
|
|
<script>
|
|
setprop("/controls/engines/current-engine/mixture", 1.0);
|
|
setprop("/controls/switches/starter", 1);
|
|
</script>
|
|
</nasal>
|
|
<message></message>
|
|
<view>
|
|
<heading-offset-deg>0.0</heading-offset-deg>
|
|
<pitch-offset-deg>-12</pitch-offset-deg>
|
|
<roll-offset-deg>0.0</roll-offset-deg>
|
|
<x-offset-m>-0.21</x-offset-m>
|
|
<y-offset-m>0.19</y-offset-m>
|
|
<field-of-view>73.6</field-of-view>
|
|
</view>
|
|
</step>
|
|
|
|
<step>
|
|
<message>In this lesson we'll taxi the aircraft from its parking position
|
|
via the taxiway Charlie to the holding pont of runway 21</message>
|
|
<nasal>
|
|
<script>
|
|
var listeners = std.Vector.new();
|
|
|
|
listeners.append(setlistener("/engines/active-engine/running", func (node) {
|
|
if (node.getBoolValue()) {
|
|
setprop("/controls/switches/starter", 0);
|
|
foreach (var listener; listeners.vector) {
|
|
removelistener(listener);
|
|
}
|
|
listeners.clear();
|
|
}
|
|
}, 1, 0));
|
|
</script>
|
|
</nasal>
|
|
|
|
<message>Damage has been turned off. You may turn it on now for more realism.</message>
|
|
<set>
|
|
<property>/fdm/jsbsim/settings/damage</property>
|
|
<value>0</value>
|
|
</set>
|
|
</step>
|
|
|
|
<step>
|
|
<message>I've already started the engine. Press Shift-B to release the parking brake. Throttle up to about
|
|
20% to move forward slightly, then hold b to check that the normal brakes work.</message>
|
|
|
|
<error>
|
|
<message>The parking brake is still on. Release it by pressing Shift-B.</message>
|
|
<condition>
|
|
<equals>
|
|
<property>/controls/gear/brake-parking</property>
|
|
<value>1</value>
|
|
</equals>
|
|
</condition>
|
|
</error>
|
|
<error>
|
|
<message>Throttle up to about 20% to move forward slightly.</message>
|
|
<condition>
|
|
<and>
|
|
<equals>
|
|
<property>/controls/gear/brake-parking</property>
|
|
<value>0</value>
|
|
</equals>
|
|
<less-than>
|
|
<property>/controls/engines/current-engine/throttle</property>
|
|
<value>0.15</value>
|
|
</less-than>
|
|
</and>
|
|
</condition>
|
|
</error>
|
|
<error>
|
|
<message>Apply the brakes by pressing b.</message>
|
|
<condition>
|
|
<and>
|
|
<equals>
|
|
<property>/controls/gear/brake-parking</property>
|
|
<value>0</value>
|
|
</equals>
|
|
<equals>
|
|
<property>/controls/gear/brake-left</property>
|
|
<value>0</value>
|
|
</equals>
|
|
<equals>
|
|
<property>/controls/gear/brake-left</property>
|
|
<value>0</value>
|
|
</equals>
|
|
</and>
|
|
</condition>
|
|
</error>
|
|
|
|
<exit>
|
|
<condition>
|
|
<and>
|
|
<equals>
|
|
<property>/controls/gear/brake-parking</property>
|
|
<value>0</value>
|
|
</equals>
|
|
<equals>
|
|
<property>/controls/gear/brake-left</property>
|
|
<value>1</value>
|
|
</equals>
|
|
<equals>
|
|
<property>/controls/gear/brake-left</property>
|
|
<value>1</value>
|
|
</equals>
|
|
</and>
|
|
</condition>
|
|
</exit>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Keep applying the brakes. You can steer the aircraft on the ground by either using 0/Enter on the
|
|
numeric keypad, or using the mouse in yoke mode (+) with the left mouse button held down. If you need to slow
|
|
down, just press b to apply the brakes.</message>
|
|
<wait>10</wait>
|
|
|
|
<error>
|
|
<message>Keep the brakes on until I tell you to start taxiing.</message>
|
|
<condition>
|
|
<or>
|
|
<equals>
|
|
<property>/controls/gear/brake-left</property>
|
|
<value>0</value>
|
|
</equals>
|
|
<equals>
|
|
<property>/controls/gear/brake-left</property>
|
|
<value>0</value>
|
|
</equals>
|
|
</or>
|
|
</condition>
|
|
</error>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Release the brakes and taxi forwards. You may need to apply a little throttle to get going.</message>
|
|
<wait>5</wait>
|
|
|
|
<error>
|
|
<message>You're driving curves. To meet the taxiway you have to taxi straight!</message>
|
|
<condition>
|
|
<or>
|
|
<less-than>
|
|
<property>/sim/tutorials/targets/taxi1/direction-deg</property>
|
|
<value>-100</value>
|
|
</less-than>
|
|
<greater-than>
|
|
<property>/sim/tutorials/targets/taxi1/direction-deg</property>
|
|
<value>100</value>
|
|
</greater-than>
|
|
</or>
|
|
</condition>
|
|
</error>
|
|
|
|
<error>
|
|
<message>Apply a little throttle to get going, but then reduce it once you're moving.</message>
|
|
<condition>
|
|
<less-than>
|
|
<property>/velocities/groundspeed-kt</property>
|
|
<value>1.0</value>
|
|
</less-than>
|
|
</condition>
|
|
</error>
|
|
|
|
<exit>
|
|
<condition>
|
|
<and>
|
|
<less-than>
|
|
<property>/sim/tutorials/targets/taxi1/distance-m</property>
|
|
<value>30.0</value>
|
|
</less-than>
|
|
<greater-than>
|
|
<property>/sim/tutorials/targets/taxi1/distance-m</property>
|
|
<value>-30.0</value>
|
|
</greater-than>
|
|
</and>
|
|
</condition>
|
|
</exit>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Turn left and continue along the centreline.</message>
|
|
<wait>5</wait>
|
|
|
|
<error>
|
|
<message>You're driving curves. To meet the taxiway you have to taxi straight!</message>
|
|
<condition>
|
|
<or>
|
|
<less-than>
|
|
<property>/sim/tutorials/targets/taxi2/direction-deg</property>
|
|
<value>-100</value>
|
|
</less-than>
|
|
<greater-than>
|
|
<property>/sim/tutorials/targets/taxi2/direction-deg</property>
|
|
<value>100</value>
|
|
</greater-than>
|
|
</or>
|
|
</condition>
|
|
</error>
|
|
<error>
|
|
<message>Apply a little throttle to get going, but then reduce it once you're moving.</message>
|
|
<condition>
|
|
<less-than>
|
|
<property>/velocities/groundspeed-kt</property>
|
|
<value>1.0</value>
|
|
</less-than>
|
|
</condition>
|
|
</error>
|
|
|
|
<exit>
|
|
<condition>
|
|
<and>
|
|
<less-than>
|
|
<property>/sim/tutorials/targets/taxi1/distance-m</property>
|
|
<value>30.0</value>
|
|
</less-than>
|
|
<greater-than>
|
|
<property>/sim/tutorials/targets/taxi1/distance-m</property>
|
|
<value>-30.0</value>
|
|
</greater-than>
|
|
</and>
|
|
</condition>
|
|
</exit>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Continue along Charlie and cross the inactive runway.</message>
|
|
|
|
<error>
|
|
<message>You're going too fast. Reduce your throttle slightly and apply your brakes.</message>
|
|
<condition>
|
|
<greater-than>
|
|
<property>/velocities/groundspeed-kt</property>
|
|
<value>15.0</value>
|
|
</greater-than>
|
|
</condition>
|
|
</error>
|
|
|
|
<exit>
|
|
<condition>
|
|
<less-than>
|
|
<property>/sim/tutorials/targets/taxi2/distance-m</property>
|
|
<value>50.0</value>
|
|
</less-than>
|
|
</condition>
|
|
</exit>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Keep going along the taxiway.</message>
|
|
|
|
<error>
|
|
<message>You're going too fast. Reduce your throttle slightly and apply your brakes.</message>
|
|
<condition>
|
|
<greater-than>
|
|
<property>/velocities/groundspeed-kt</property>
|
|
<value>15.0</value>
|
|
</greater-than>
|
|
</condition>
|
|
</error>
|
|
|
|
<exit>
|
|
<condition>
|
|
<less-than>
|
|
<property>/sim/tutorials/targets/taxi3/distance-m</property>
|
|
<value>50.0</value>
|
|
</less-than>
|
|
</condition>
|
|
</exit>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Set the throttle to idle and apply the parking brake</message>
|
|
<view>
|
|
<heading-offset-deg>0.0</heading-offset-deg>
|
|
<pitch-offset-deg>-19.7</pitch-offset-deg>
|
|
<roll-offset-deg>0.0</roll-offset-deg>
|
|
<x-offset-m>-0.2</x-offset-m>
|
|
<y-offset-m>0.2</y-offset-m>
|
|
<z-offset-m>0.4</z-offset-m>
|
|
<field-of-view>85.0</field-of-view>
|
|
</view>
|
|
|
|
<error>
|
|
<message>We now have to execute the run-up checks and therefore you need to stop. Set the parking brake!</message>
|
|
<condition>
|
|
<not-equals>
|
|
<property>/controls/gear/brake-parking</property>
|
|
<value>1</value>
|
|
</not-equals>
|
|
</condition>
|
|
</error>
|
|
|
|
<error>
|
|
<message>Set the throttle to idle!</message>
|
|
<condition>
|
|
<greater-than>
|
|
<property>/controls/engines/current-engine/throttle</property>
|
|
<value>0.05</value>
|
|
</greater-than>
|
|
</condition>
|
|
</error>
|
|
|
|
<exit>
|
|
<condition>
|
|
<and>
|
|
<equals>
|
|
<property>/controls/gear/brake-parking</property>
|
|
<value>1</value>
|
|
</equals>
|
|
<less-than-equals>
|
|
<property>/controls/engines/current-engine/throttle</property>
|
|
<value>0.05</value>
|
|
</less-than-equals>
|
|
<less-than>
|
|
<property>/velocities/groundspeed-kt</property>
|
|
<value>1</value>
|
|
</less-than>
|
|
</and>
|
|
</condition>
|
|
</exit>
|
|
</step>
|
|
|
|
<step>
|
|
<message>We've reached the run-up area. Well done.</message>
|
|
</step>
|
|
|
|
</PropertyList>
|