325 lines
9.6 KiB
XML
325 lines
9.6 KiB
XML
<PropertyList>
|
|
<name>Start Up</name>
|
|
<description>
|
|
Before you go flying, you'll need to learn how to start the engines.
|
|
|
|
This tutorial will take you through the pre-startup checklist and starting the Cessna 172p.
|
|
</description>
|
|
<audio-dir>Aircraft/c172p/Tutorials/startup</audio-dir>
|
|
<timeofday>morning</timeofday>
|
|
|
|
<presets>
|
|
<airport-id>KLVK</airport-id>
|
|
<on-ground>1</on-ground>
|
|
<runway>12</runway>
|
|
<altitude-ft>-9999</altitude-ft>
|
|
<latitude-deg>37.6952</latitude-deg>
|
|
<longitude-deg>-121.8167</longitude-deg>
|
|
<heading-deg>175.0</heading-deg>
|
|
<airspeed-kt>0</airspeed-kt>
|
|
<glideslope-deg>0</glideslope-deg>
|
|
<offset-azimuth-deg>0</offset-azimuth-deg>
|
|
<offset-distance-nm>0</offset-distance-nm>
|
|
</presets>
|
|
|
|
<init>
|
|
<set>
|
|
<property>/controls/gear/brake-parking</property>
|
|
<value>1</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/flight/flaps</property>
|
|
<value>0.0</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/engines/engine/magnetos</property>
|
|
<value>0</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/engines/engine/throttle</property>
|
|
<value>0.0</value>
|
|
</set>
|
|
<set>
|
|
<property>/engines/engine/running</property>
|
|
<value>false</value>
|
|
</set>
|
|
<set>
|
|
<property>/instrumentation/adf/frequencies/selected-khz</property>
|
|
<value>340</value>
|
|
</set>
|
|
<set>
|
|
<property>/environment/weather-scenario</property>
|
|
<value>Fair weather</value>
|
|
</set>
|
|
<set>
|
|
<property>/controls/flight/elevator-trim</property>
|
|
<value>0.17</value>
|
|
</set>
|
|
</init>
|
|
|
|
<step>
|
|
<message>Welcome to Livermore Municipal Airport. In this lesson we'll go through the pre-startup checks and start the aircraft.</message>
|
|
<wait>10</wait>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Before we start up, we need to brief what we'll do in case of an engine fire on startup. As
|
|
this isn't our aircraft, and we're fully insured, we'll simply open the door and run away.</message>
|
|
<wait>10</wait>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Next, we check our seatbelts, and seat adjustments. Cessnas can get worn seat rails that
|
|
sometimes cause the seat to slip backwards, often just as you take off, so make sure it is secure.</message>
|
|
<wait>10</wait>
|
|
</step>
|
|
|
|
<step>
|
|
<message>The fuel selector is set to BOTH, the Mixture control is fully rich, and the carb heat is off.</message>
|
|
<view>
|
|
<heading-offset-deg>344.0</heading-offset-deg>
|
|
<pitch-offset-deg>-48.7</pitch-offset-deg>
|
|
<roll-offset-deg>0.0</roll-offset-deg>
|
|
<x-offset-m>-0.2</x-offset-m>
|
|
<y-offset-m>0.235</y-offset-m>
|
|
<z-offset-m>0.36</z-offset-m>
|
|
<field-of-view>37.0</field-of-view>
|
|
</view>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Open the throttle slightly. Use your joystick throttle control,
|
|
or PgUp to increase throttle to about 10%.</message>
|
|
<view>
|
|
<heading-offset-deg>347.2</heading-offset-deg>
|
|
<pitch-offset-deg>-21.8</pitch-offset-deg>
|
|
<roll-offset-deg>0.0</roll-offset-deg>
|
|
<x-offset-m>-0.2</x-offset-m>
|
|
<y-offset-m>0.3</y-offset-m>
|
|
<z-offset-m>0.4</z-offset-m>
|
|
<field-of-view>55.0</field-of-view>
|
|
</view>
|
|
<marker>
|
|
<x-m>-0.3342</x-m>
|
|
<y-m>-0.0027</y-m>
|
|
<z-m>-0.2289</z-m>
|
|
<scale>3.1156</scale>
|
|
</marker>
|
|
<error>
|
|
<message>Push in the throttle using PgUp, or your joystick throttle control.</message>
|
|
<message>Open the throttle a bit more.</message>
|
|
<condition>
|
|
<less-than>
|
|
<property>/controls/engines/engine/throttle</property>
|
|
<value>0.05</value>
|
|
</less-than>
|
|
</condition>
|
|
</error>
|
|
<error>
|
|
<message>That's a bit too much. Pull it out slightly using your joystick throttle control, or PgDn.</message>
|
|
<condition>
|
|
<greater-than>
|
|
<property>/controls/engines/engine/throttle</property>
|
|
<value>0.2</value>
|
|
</greater-than>
|
|
</condition>
|
|
</error>
|
|
<exit>
|
|
<condition>
|
|
<and>
|
|
<greater-than>
|
|
<property>/controls/engines/engine/throttle</property>
|
|
<value>0.05</value>
|
|
</greater-than>
|
|
<less-than>
|
|
<property>/controls/engines/engine/throttle</property>
|
|
<value>0.2</value>
|
|
</less-than>
|
|
</and>
|
|
</condition>
|
|
</exit>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Now, we'll check no-one is about to walk into our propeller.</message>
|
|
<wait>2</wait>
|
|
<view>
|
|
<heading-offset-deg>44.0</heading-offset-deg>
|
|
<pitch-offset-deg>-15.7</pitch-offset-deg>
|
|
<roll-offset-deg>0.0</roll-offset-deg>
|
|
<x-offset-m>-0.2</x-offset-m>
|
|
<y-offset-m>0.3</y-offset-m>
|
|
<z-offset-m>0.4</z-offset-m>
|
|
<field-of-view>55.0</field-of-view>
|
|
</view>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Looks clear.</message>
|
|
<wait>2</wait>
|
|
<view>
|
|
<heading-offset-deg>296.6</heading-offset-deg>
|
|
<pitch-offset-deg>-10.4</pitch-offset-deg>
|
|
<roll-offset-deg>0.0</roll-offset-deg>
|
|
<x-offset-m>-0.2</x-offset-m>
|
|
<y-offset-m>0.3</y-offset-m>
|
|
<z-offset-m>0.4</z-offset-m>
|
|
<field-of-view>55.0</field-of-view>
|
|
</view>
|
|
</step>
|
|
|
|
<step>
|
|
<message>We need to switch on the magnetos. Click the middle hotspot three times, so the key is set to BOTH.</message>
|
|
<view>
|
|
<heading-offset-deg>12.2</heading-offset-deg>
|
|
<pitch-offset-deg>-35.2</pitch-offset-deg>
|
|
<roll-offset-deg>0.0</roll-offset-deg>
|
|
<x-offset-m>-0.2</x-offset-m>
|
|
<y-offset-m>0.3</y-offset-m>
|
|
<z-offset-m>0.4</z-offset-m>
|
|
<field-of-view>27.6</field-of-view>
|
|
</view>
|
|
<marker>
|
|
<x-m>-0.3689</x-m>
|
|
<y-m>-0.4138</y-m>
|
|
<z-m>-0.2493</z-m>
|
|
<scale>3.0000</scale>
|
|
</marker>
|
|
<set>
|
|
<property>/sim/panel-hotspots</property>
|
|
<value>true</value>
|
|
</set>
|
|
<set>
|
|
<property>/sim/model/hide-yoke</property>
|
|
<value>true</value>
|
|
</set>
|
|
<error>
|
|
<message>Click the middle hotspot three times, so both magnetos are on and the key
|
|
is set to BOTH.</message>
|
|
<condition>
|
|
<less-than>
|
|
<property>/controls/engines/engine/magnetos</property>
|
|
<value>3</value>
|
|
</less-than>
|
|
</condition>
|
|
</error>
|
|
|
|
<exit>
|
|
<condition>
|
|
<equals>
|
|
<property>/controls/engines/engine/magnetos</property>
|
|
<value>3</value>
|
|
</equals>
|
|
</condition>
|
|
</exit>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Finally, we can start the engine. Hold down s, or the right hotspot until the engine catches.</message>
|
|
<view>
|
|
<heading-offset-deg>12.2</heading-offset-deg>
|
|
<pitch-offset-deg>-35.2</pitch-offset-deg>
|
|
<roll-offset-deg>0.0</roll-offset-deg>
|
|
<x-offset-m>-0.2</x-offset-m>
|
|
<y-offset-m>0.3</y-offset-m>
|
|
<z-offset-m>0.4</z-offset-m>
|
|
<field-of-view>27.6</field-of-view>
|
|
</view>
|
|
<marker>
|
|
<x-m>-0.3689</x-m>
|
|
<y-m>-0.4138</y-m>
|
|
<z-m>-0.2493</z-m>
|
|
<scale>3.0000</scale>
|
|
</marker>
|
|
<error>
|
|
<message>Wrong way - set the magnetos back to BOTH.</message>
|
|
<message>You need the magnetos on to start the engine. Set them to BOTH by clicking the middle hotspot or pressing ].</message>
|
|
<condition>
|
|
<not-equals>
|
|
<property>/controls/engines/engine/magnetos</property>
|
|
<value>3</value>
|
|
</not-equals>
|
|
</condition>
|
|
</error>
|
|
<exit>
|
|
<condition>
|
|
<equals>
|
|
<property>/engines/engine/running</property>
|
|
<value>1</value>
|
|
</equals>
|
|
</condition>
|
|
</exit>
|
|
</step>
|
|
|
|
<step>
|
|
<message>Great, the engine is running. Adjust the throttle so we're running at between 800 and 1000 RPM.</message>
|
|
<view>
|
|
<heading-offset-deg>360.0</heading-offset-deg>
|
|
<pitch-offset-deg>-12.0</pitch-offset-deg>
|
|
<roll-offset-deg>0.0</roll-offset-deg>
|
|
<x-offset-m>-0.2</x-offset-m>
|
|
<y-offset-m>0.3</y-offset-m>
|
|
<z-offset-m>0.4</z-offset-m>
|
|
<field-of-view>55.0</field-of-view>
|
|
</view>
|
|
<marker>
|
|
<x-m>-0.3791</x-m>
|
|
<y-m>-0.3089</y-m>
|
|
<z-m>-0.1320</z-m>
|
|
<scale>3.8622</scale>
|
|
</marker>
|
|
<set>
|
|
<property>/sim/panel-hotspots</property>
|
|
<value>false</value>
|
|
</set>
|
|
<set>
|
|
<property>/sim/model/hide-yoke</property>
|
|
<value>false</value>
|
|
</set>
|
|
<error>
|
|
<message>You can release the starter motor now - the engine is running</message>
|
|
<condition>
|
|
<equals>
|
|
<property>/controls/engines/engine/starter</property>
|
|
<value>true</value>
|
|
</equals>
|
|
</condition>
|
|
</error>
|
|
<error>
|
|
<message>That's a bit high. Reduce throttle slightly with PgDn, or your joystick throttle control.</message>
|
|
<condition>
|
|
<greater-than>
|
|
<property>/engines/engine/rpm</property>
|
|
<value>1000.0</value>
|
|
</greater-than>
|
|
</condition>
|
|
</error>
|
|
<error>
|
|
<message>That's too low. Increase throttle slightly with PgUp, or your joystick throttle control.</message>
|
|
<condition>
|
|
<less-than>
|
|
<property>/engines/engine/rpm</property>
|
|
<value>800.0</value>
|
|
</less-than>
|
|
</condition>
|
|
</error>
|
|
<exit>
|
|
<condition>
|
|
<and>
|
|
<greater-than>
|
|
<property>/engines/engine/rpm</property>
|
|
<value>800</value>
|
|
</greater-than>
|
|
<less-than>
|
|
<property>/engines/engine/rpm</property>
|
|
<value>1000</value>
|
|
</less-than>
|
|
</and>
|
|
</condition>
|
|
</exit>
|
|
</step>
|
|
|
|
<end>
|
|
<message>Great. We're now ready to taxi to the runway.</message>
|
|
</end>
|
|
</PropertyList>
|