This document describes how FlightGear searches and loads scenery, how to add static objects to the scenery as well as the syntax of *.stg files. Contents ---------------------------------------------------------------------- 1 scenery path 2 terrasync 3 stg files 3.1 OBJECT_BASE 3.2 OBJECT 3.4 OBJECT_SHARED / OBJECT_SHARED_AGL 3.3 OBJECT_STATIC / OBJECT_STATIC_AGL 3.5 OBJECT_SIGN /OBJECT_SIGN_AGL 3.6 BUILDING_ROUGH / BUILDING_DETAILED 3.7 ROAD_ROUGH / ROAD_DETAILED 3.8 RAILWAY_ROUGH / RAILWAY_DETAILED 3.9 BUILDING_LIST 4 model manager ("/models/model") 4.1 static objects 4.2 dynamic objects 4.3 loading/unloading at runtime 5 tools for object placing 5.1 calc-tile.pl 5.2 ufo scenery object editor 6 embedded Nasal 6.1 static models 6.2 AI models 1 scenery path ---------------------------------------------------------------- FlightGear loads scenery by default from the Scenery/ subdirectory of its data directory. The path to this data directory can be set via environment variable FG_ROOT or the --fg-root option. The scenery path can be set independently via environment variable FG_SCENERY or option --fg-scenery. The order of precedence is as follows: --fg-scenery=/some/dir ... highest priority $FG_SCENERY $FG_ROOT/Scenery/ ... lowest priority A scenery specification may be a list of paths, separated by the OS-specific path separator (colon on Unix/OSX, semicolon on MS Windows). The paths are searched in the order from left to right: FG_SCENERY=/first/dir:/second/dir:/third/dir (likewise with --fg-scenery option) Each of the scenery paths can follow one of two possible layouts: with or without Terrain/ and Objects/ subdirectories. As soon as either or both of these subdirectories are found, scenery is only searched *in* these two, but not in any other directory on the same hierarchy level! This example shows which directories are used to search for scenery: $ ls /first/dir w130n30/ searched $ ls /second/dir Objects/ searched Terrain/ searched w130n30/ *not* searched $ ls /third/dir Terrain/ searched w130n30/ *not* searched If FlightGear searches for a particular "tile" file, let's say for "w130n30/w123n37/942050.stg", then (using the above examples) it looks into /first/dir/w130n30/w123n37/942050.stg (A) /second/dir/Terrain/w130n30/w123n37/942050.stg (B)\__ same path element /second/dir/Objects/w130n30/w123n37/942050.stg (C)/ /second/dir /third/dir/Terrain/w130n30/w123n37/942050.stg (D) but as soon as it finds an OBJECT_BASE entry it only finishes this path element and then stops scanning. So, if (B) contains an entry "OBJECT_BASE 942050.btg, then the twin Objects/ directory (C) will be read, too. But (D) will *not*! Objects/ and Terrain/ directories are laid out equally. Airport and elevation data, as well as airport inventory objects are usually put into Terrain/, while other objects are put into Objects/. This searching behavior is usually used to collect user-added custom objects first, then to read in standard scenery and objects that came with the distribution (San Francisco Bay area), and to use locally added scenery everywhere else. So a typical scenery path specification could look like this: FG_SCENERY=$HOME/.fgfs/Scenery:$FG_ROOT/Scenery:$FG_ROOT/WorldScenery The third path would then be populated by the user with unpacked scenery archives downloaded from http://www.flightgear.org/Downloads/scenery.html, or by using terrasync (see next section). Additional objects can be downloaded from the FlightGear Objects Database (http://scenemodels.flightgear.org/download/). (Note that those objects are occasionally merged into the flightgear.org/terrasync packages, so you may end up with doubled entries!) Using a private directory for downloaded add-on scenery and adding that path to FG_SCENERY is the preferred way. This separates default data from locally added data, and makes administration and later updates easier. HINT: if you want to see where FlightGear is searching and finding terrain/objects, start it with the --log-level=info option. 2 terrasync ------------------------------------------------------------------- FlightGear comes with a utility "terrasync" that allows downloading scenery (literally) "on-the-fly. Given the scenery path setup from section 1 you could use terrasync with a script like this: #!/bin/bash PORT=5503 nice terrasync -p $PORT -d $FG_ROOT/WorldScenery& fgfs --atlas=socket,out,1,localhost,$PORT,udp $* killall terrasync If you name it "fgfsterra", then you can use it just like you would use "fgfs", but behind the scenes it would update your scenery everywhere in sight and save the files to $FG_ROOT/WorldScenery. Example: $ ./fgfsterra --aircraft=ufo --airport=LOXZ Note, however, that if it downloads scenery for the area around your starting location, then you'll only see that after the next start, or after you flew or teleported to a distant location and then back. terrasync depends on the rsync application and an open port 873, so it may not be available/usable on MS Windows. 3 stg files ------------------------------------------------------------------- stg files ("static terragear") define the static elements of a scenery "tile", including the terrain elevation data, airport geometry, and all static objects placed on this tile. (See section 5 for how to find out which geo coordinates belong to which tile.) Four of the available key words are followed by a string and four numbers. The meaning of these numbers is always the same and described in section 3.3. 3.1 OBJECT_BASE ---------------- specifies the terrain elevation data file. These files are generated with the TerraGear tools (http://www.terragear.org/) and have file extension ".btg" ("binary terragear"; there used to be an "*.atg" file, too, where the 'a' stood for ASCII). Example: OBJECT_BASE 942050.btg The entry may be anywhere in the 942050.stg file, on a separate line. 3.2 OBJECT ----------- specifies an airport geometry 'drop-in' file. The scenery elevation file has cut out holes for airports, that are filled with such objects. They are usually called after the airport ICAO id: Example: OBJECT KSFO.btg These files are, again, created by TerraGear tools and are usually gzipped, so you'll find that file stored as KSFO.btg.gz. 3.3 OBJECT_SHARED / OBJECT_SHARED_AGL -------------------------------------- add static object to the tile. Example: OBJECT_SHARED Models/Airport/tower.xml -122.501090 37.514830 15.5 0.00 0.00 0.00 Syntax: OBJECT_SHARED The is relative to the data directory (FG_ROOT). is in meter and relative to mean sea-level (in the fgfs world). is in degree, counter-clockwise with North being 0.0. Note that this differs from about every other place in FlightGear, most notably the /orientation/heading-deg entry in the property system, which is clockwise. and are in degree and optional. OBJECT_SHARED models are cached and reused. They are only once in memory and never freed. (See also the next section.) OBJECT_SHARED_AGL places the object relative to the ground elevation. Note that this is an expensive operation and is strongly discouraged. 3.4 OBJECT_STATIC / OBJECT_STATIC_AGL -------------------------------------- add static objects to the tile, just like OBJECT_SHARED. There are three differences to OBJECT_SHARED (apart from the name): (A) the path is relative to the tile directory where the *.stg file with this entry is located. For example, relative to 130n30/w123n37/. This usually means that all 3D object files, textures, and XML animation files are in this tile directory, too. (B) these objects are *not* cached and kept loaded, but rather freed with the tile (that is, when you leave that area). (C) the animation XML files may contain Nasal blocks and which are executed on loading/unloading. Example: OBJECT_STATIC ggb-fb.xml -122.4760494 37.81876042 0 105 0.00 0.00 OBJECT_STATIC_AGL places the object relative to the ground elevation. Note that this is an expensive operation and is strongly discouraged. 3.5 OBJECT_SIGN / OBJECT_SIGN_AGL --------------------------------- defines taxiway or runway sign. The syntax is much like that of OBJECT_SHARED entries, except that the path is replaced with a sign contents specification and that there is an additional size value at the end of the line. Example: OBJECT_SIGN {@R}10L-28R{@L}C -122.35797457 37.61276290 -0.5398 74.0 2 The sign specification defines the sign contents. We try to resemble the apt.dat 850 specifications in our implementation. In the simplest form it contains just 'normal' text, for example: EXIT This will create a black panel of 1m height with "EXIT" written on it in white versal letters. Actually, each of those characters are single-letter glyph names that are looked up in the map of a texture font entry in $FG_ROOT/materials.xml. It just happens that the entry for 'E' maps to a drawn 'E' in the font texture. This isn't true for all ASCII characters. Many aren't mapped at all (and thus not available), others are mapped to non-standard drawings. The '_', for example, is mapped to an empty black area and can therefore be used as a space. (The sign specification must not contain real spaces.) The '*' is mapped to a raised period. Some glyph names consist of more than one character, and can't, thus, be used directly. They have to be put in a pair of curly braces: {^rd} This creates an arrow that points to the right and down. Braces can really contain a list of glyph names, separated by commas (no space!). Single-letter glyph names can be used that way, too, or in any mixture of both methods: EXIT {E,X,I,T} {E}{X}{I}{T} EX{I,T} E{X,I}T{^lu,^rd} {^u}EXIT{^u} Multi-letter glyph names are usually used for symbols. Arrow symbol names always start with a caret ("arrow head") and the left or right direction always comes first (like the x in a Cartesian coordinate system). Here's a list of some of the available names (see $FG_ROOT/materials.xml for more): ^l left arrow ^r right arrow ^u up arrow ^d down arrow ^lu left-up arrow ^ld left-down arrow ^ru right-up arrow ^rd right-down arrow no-entry "no entry" symbol critical runway critical area safety ils safety area hazard end of taxiway There are commands for pre-defined sign types according to the FAA specification (5345-44; see http://www.google.com/search?q=5345-44g). @Y "Direction, Destination, Boundary" sign (black on yellow) @R "Mandatory Instruction" sign (white on red with black outline) @L "Location" sign (yellow text and frame on black) @B "Runway Distance Remaining" sign (white on black) Examples: {@R}10L-28R{@L}C {@Y,^l}P|{^lu}N{@L}F{@Y}F{^ru} {@Y,^ld}C ... same as any of {@Y}{@ld}C {@Y,@ld,C} {@B}17 Syntax errors are reported in --log-level=debug, in the SG_TERRAIN group. You can use this command line to filter out such messages: $ fgfs --log-level=debug 2>&1|grep OBJECT_SIGN OBJECT_SIGN_AGL places the sign relative to the ground elevation. Note that this is an expensive operation and is strongly discouraged. 3.6 BUILDING_ROUGH / BUILDING_DETAILED --------------------------------------- defines building meshes, typically based on OSM data. Example: BUILDING_ROUGH buildings.ac -122.501090 37.514830 15.5 0.00 0.00 0.00 Syntax: BUILDING_ROUGH Note that only bare .ac files should be referenced. The material definition for "OSM_Building" will be used to determine the texture and Effects. BUILDING_ROUGH uses the "rough" LOD range, while BUILDING_DETAILED uses the "detailed" LOD range. Some randomness is applied so that building meshes gradually fade in 3.7 ROAD_ROUGH / ROAD_DETAILED ------------------------------- Identical to BUILDING_ROUGH / BIULDING_DETAILED above, except used for roads. the material definition "OSM_Road" is applied. 3.8 RAILWAY_ROUGH / RAILWAY_DETAILED ------------------------------- Identical to BUILDING_ROUGH / BIULDING_DETAILED above, except used for roads. the material definition "OSM_Railway" is applied. 3.9 BUILDING_LIST ------------------ Defines a file containing building coordinates that should be rendered using the building shader (aka Random Buildings). Example: BUILDING_LIST buildings.txt OSM_Building -2.72943543 56.00080606 36.1 Syntax BUILDING_LIST Where: - is the name of a file containing building positions - is the name of the material that will be referenced to find random building parameters. - , , defines the center of the set of buildings, and also the point at which the material definition will be evaluated (for regional materials). See README.materials for details on configuring the random building parameters. The referenced (in the example buildings.txt) contains lines of the form X Y Z R B W D H P S O F WT RT Where: - X,Y,Z are the cartesian coordinates of the center of the front face. +X is East, +Y is North - R is the building rotation in degrees centered on the middle of the front face. - B is the building type [0, 1, 2] for SMALL, MEDIUM, LARGE - W is the building width in meters - D is the building depth in meters - H is the building height in meters, excluding any pitched roof - P is the pitch height in meters. 0 for a flat roof - S is the roof shape (only 0, 2, 4, 6 are implemented, others are approximated to those) : 0=flat 1=skillion 2=gabled 3=half-hipped 4=hipped 5=pyramidal 6=gambrel 7=mansard 8=dome 9=onion 10=round 11=saltbox - O is the roof ridge orientation : 0 = parallel to the front face of the building 1 = orthogonal to the front face of the building - F is the number of floors (integer) - WT is the texture index to use for walls (integer). Buildings with the same WT value will have the same wall texture assigned. There are 6 small, 6 medium and 4 large textures. - RT is the texture index to use for roofs (integer). Buildings with the same RT value will have the same roof texture assigned. There are 6 small, 6 medium and 4 large textures. where : - (,,) define the bottom left corner of the building in cartesian space (+X is North, +Y is East, +Z is up), with (0,0,0) being the position referenced above - is the clockwise rotation around the Z-axis in degrees, rotating around the bottom left (SW) corner of the building - is {0,1,2} which map to small, medium and large buildings respectively, as per random buildings. For example, the following entries generates 3 small, 2 medium and 2 large buildings in an easterly line: 0 0 0 0 0 0 100 0 0 0 0 200 0 0 0 0 300 0 0 1 0 400 0 0 1 0 500 0 0 2 4 model manager ("/models/model") -------------------------------------------- 4.1 static objects ------------------- Another way to add objects to the scenery is via the "model manager". It reads all /models/model entries at startup and places these objects in the scenery. Just load a definition like the following into the property tree, for example by putting it into $FG_ROOT/preferences.xml, or better: an XML file that you load with e.g. --config=$HOME/.fgfs/stuff.xml: pony Local/pony.ac -115.8352869 37.24302849 4534.691321 0 0 0 The is relative to $FG_ROOT, the is optional. One can leave the heading/pitch/roll entries away, in which case they are set to zero. The values are fixed and unchangeable at runtime. 4.2 dynamic objects -------------------- Any of the model properties can be made changeable at runtime by appending "-prop" and using a property path name instead of the fixed value: -115.8352869/ 37.24302849 4534.691321 0 pony Local/pony.ac /local/pony/longitude-deg /local/pony/latitude-deg /local/pony/elevation-ft /local/pony/heading-deg 1.234 Then one can move the pony around by changing the values in /local/pony/ in the property system. One can, of course, use other animals, too. 4.3 loading/unloading at runtime -------------------------------- Both dynamic and static model-manager-models can be loaded and unloaded at runtime. For loading you first create a new entry under , initialize all properties there ( or , etc.), and finally you create a child of any type in this group. This is the signal for the model manager to load the object. You can remove the property after that. It has no further meaning. To remove a model-manager model at runtime, you simply delete the whole group. 5 tools for object placing ---------------------------------------------------- 5.1 calc-tile.pl ---------------- For finding out the tile number for a given geo coordinate pair there's a script "scripts/perl/scenery/calc-tile.pl" in the FlightGear sources. You feed longitude and latitude to it and it returns the path to the *.stg file where you have to add the object entry. $ perl calc-tile.pl 16.1234 48.5678 Longitude: 16.1234 Latitude: 48.5678 Tile: 3220128 Path: "e010n40/e016n48/3220128.stg" 5.2 ufo scenery object editor ----------------------------- The ufo has a scenery object editor built-in. It uses the model manager described in section 4. To place objects with it, start fgfs, optionally with specifying an initial model type ("cursor") and a list of subdirectories of $FG_ROOT where the ufo should search for available 3D models ("source"): $ fgfs --aircraft=ufo --prop:cursor=Models/Airport/radar.xml \ --prop:source=Models,Scenery/Objects Then click anywhere on the terrain to add a model (left mouse button). You can open the adjustment dialog (Tab-key) to make adjustments to position and orientation. Click as often as you like, choose further models from the space-key dialog. You can select an already placed object by Ctrl-clicking at its base (not at the object itself, but the surface point where it's located!). By also holding the Shift key down, you can select several objects or add them to a selection. You can remove the selected object(s) with the Backspace-key. (See the ?-key dialog for futher available keys.) After clicking on the input field right over the status line (invisible if there's no text in it) you can enter a comment/legend for the selected object. And finally, you dump the object data to the terminal (d-key) or export them to a file $HOME/.fgfs/ufo-model-export.xml (Unix) or %APPDATA%\flightgear.org\ufo-model-export.xml (MS Windows). You can now put the generated object entries into the specified *.stg file to make them permanent. Or load the whole exported *.xml file via --config option: $ fgfs --config=$HOME/.fgfs/ufo-model-export.xml If you choose the sign placeholder object from the m-key dialog (first entry; "Aircraft/ufo/Models/sign.ac"), then an OBJEC_SIGN *.stg line will be generated with the legend used as sign contents. If you didn't insert any legend, then the sign text will be: NO CONTENTS and a 4 digits random number for later identification in the *.stg file. Unfortunately, objects added with this method are kept in memory, no matter where you are actually flying, so the *.stg method is preferable. 6 embedded Nasal in XML files (static objects and AI) ------------------------- 6.1 static models ----------------- Objects loaded via OBJECT_STATIC in *.stg files as well as AI models loaded via scenarios may contain embedded Nasal code. This can be used to drive more advanced animations. An example is a lighthouse with specific light signals, or hangar doors that open when the "player"'s aircraft is nearby. The Nasal code is added to the object's XML wrapper/animation file, anywhere on the top level, for example: lighthouse.ac var loop_id = 0; var light = aircraft.light.new(" "/models/static/w120n30/w118n35/lighthouse/light", [2, 1, 2, 1, 2, 1, 2, 5]); var loop = func(id) { id == loop_id or return; light.switch(getprop("/sim/time/sun-angle-rad") > 1.37); settimer(func { loop(id) }, 30); } loop(loop_id += 1); loop_id += 1 select light-halo /models/static/w120n30/w118n35/lighthouse/light/state ... The part is executed when the scenery tile on which the model is placed is loaded into memory. It can start timers or listeners that modify properties, which are then queried by the . As a convention developers are requested to use "/models/static/" + + . So, in the above example file "$FG_ROOT/Scenery/Objects/w120n30/w118n35/lighthouse.xml" all properties are stored under "/models/static/w120n30/w118n35/lighthouse/". That way collisions with other models are quite unlikely. An optional part is executed when the tile and model is removed from memory. Note that this is only when the "player" is already far away! To cause minimal impact on the framerate it is recommended to do as few calculations as possible, to use as large timer intervals as possible, and to stop all timers and listeners in the part, as shown in the example. All Nasal variables/functions are in a separate namespace, which is named after the file name. It's recommended not to access this namespace from outside for other than development purposes. What the above code does: as soon as the model is loaded, an aircraft.light is created with a specific light sequence. Then, in half-minute intervals, the light is turned on or off depending on the sun angle. On the loop identifier is increased, which makes the loop terminate itself. For more info about this technique, see the Nasal wiki. 6.2 AI models ------------- Here the syntax is the same like for static models. The only two differences are: - these models are currently only removed at program end, so it's more important to consider effects on performance. - AI models don't need to store their properties in /models/static/..., but get a separate node under /ai/models/, for example /ai/models/carrier[1]. The embedded Nasal code can access this dynamically assigned property via cmdarg() function, which returns a props.Node hash. Example: print("my data are under ", cmdarg().getPath()) print("Currently I'm only called at fgfs exit!")