Emit the Garmin AV400 protocol required to drive a Garmin 196/296 series GPS Emite o protocolo Garmin AV400 requerido para utilizar um GPS Garmin 196/296 series

Emit the set of AV400 strings required to drive a Garmin 400-series GPS from FlightGear Emite um conjunto de caracteres de texto AV400 requeridos para usar um GPS Garmin 400-series no FlightGear

Open connection for "A" channel using Garmin WAAS GPS protocol

Open connection for "B" channel using Garmin WAAS GPS protocol

Specify a path to addon;

Set the ADF1 radio frequency, optionally preceded by a card rotation. Define a frequencia de radio ADF1, opcionalmente precedido por uma rotacao de carta.

Set the ADF2 radio frequency, optionally preceded by a card rotation. Define a frequencia de radio ADF2, opcionalmente precedido por uma rotacao de carta.

Select aircraft aerodynamics model to load Seleciona o modelo da aerodinamica da aeronave para carregar

Add and enable a new scenario. Multiple options are allowed. Adiciona e habilita um novo cenario. Multiplas opcoes sao permitidas.

Select an aircraft profile as defined by a top level <name>-set.xml Selecionar um perfil de aeronave definido por um <nome>-set.xml de nivel superior

Specify the exact directory to use for the aircraft (normally not required, but may be useful). Interpreted relatively to the current directory. Causes the <path-cache> from autosave_X_Y.xml, as well as --fg-aircraft and the FG_AIRCRAFT environment variable to be bypassed. Diretorio das aeronaves relativo ao caminho do executavel

Aircraft Aeronave

Specify starting position relative to an airport Especifica a posicao inicial relativa ao aeroporto

Remove security flag, which means that network connections will be allowed full access to the simulator including running arbitrary scripts. Ensure you have adequate security (such as a firewall which blocks external connections).

Allow Nasal scripts to read files from directories listed as path (separate multiple paths with a semicolon (Windows) or a colon (UNIX)). By default, for security reasons, Nasal scripts can only read data from certain directories, such as $FG_ROOT, $FG_HOME, etc.

Starting altitude Altitude inicial

Specify a multiplier for the aspect ratio. Especificar um multiplicador para a taxa de proporcao.

Open connection using the ATC sim protocol (atc610x) Abrir conexao usando o protocolo ATC sim(atc610x)

Open connection using the Atlas protocol Abrir conexao usando o protocolo Atlas

Audio Options Opcoes de Audio

Avionics Options Opciones dos Avionicos

Specify the bits per pixel Especifica os bits por pixel

Specify path to your web browser Especifica o caminho do navegador web

Assign a unique name to a player Atribui um nome unico para um jogador

Specify starting position on an AI carrier Especifica a posicao inicial em um porta-avioes IA

Specify a starting position relative to the carrier where you can use the predefined abeam (start on downwind abeam) or FLOLS (start on final approach) values, or specify the name of the carrier's parking position. Must also specify a carrier.

Create an overcast ceiling, optionally with a specific thickness (defaults to 2000 ft). Criar um teto nublado, opcionalmente, com uma espessura especifica (o padrao e 2000 pes).

Set the COM1 radio frequency Define a frequencia de radio COM1

Set the COM2 radio frequency Define a frequencia de radio COM2

Enable CompositeViewer (extra view windows)

Specify the path to XML file for multi-pass rendering. The path is relative to $FG_ROOT (defaults to Compositor/default.xml).

Load additional properties from path Carrega propriedades adicionais do caminho

Display console (Windows specific)

Specify an additional base data directory (FGData), before the $FG_ROOT directory

Debugging Options Opcoes de Depuracao

Enable developer mode

Deprecated option (disable internal AI subsystem) Opcao em desuso (desativa o sistema de trafego interativo)

Disable artificial traffic. Desativar trafego artificial.

Disable anti-aliased HUD Desativa o visor holografico (HUD) com anti-serrilhado

Disable auto coordination Desativa a auto-coordenacao

Clock advances normally Relogio avanca normalmente

Disable 2D (flat) cloud layers Desativar as camadas de nuvens 2D (planas)

Disable 3D (volumetric) cloud layers Desativar as camadas de nuvens 3D (volumetricas)

Disable runway light distance attenuation Desativa a atenuacao da distancia das luzes da pista

Disable enhanced runway lighting Desativa a iluminacao melhorada das pistas

Disable FGCom built-in

Start in a running state Comece em um estado de funcionamento

Fuel is consumed normally O combustivel e consumido normalmente

Disable fullscreen mode Desativa o modo tela cheia

Enable headless mode

Disable the move to hold short position for multiplayer

Disable celestial body growth illusion near the horizon Desativa a ilusao do crescimento de corpos celestes perto do horizonte

Disable 3D HUD Desativa o visor holografico (HUD) 3D

Disable Heads Up Display (HUD) Desativa visor holografico (HUD)

Disable extra mouse pointer Desativar ponteiro adicional do mouse

Disable instrument panel Desativa o painel de instrumentos

Exclude random buildings objects Excluir edificios aleatorios

Exclude random scenery objects Excluir objetos aleatorios do cenario

Exclude random vegetation objects Excluir objetos aleatorios de vegetacao

Disable METAR based real weather fetching Desativar a busca de clima real baseada em METAR

Don't save preferences upon program exit Nao salvar preferencias ao sair do programa

Disable crash and error reports from being sent to the development team for analysis

Disable sound effects Desativa efeitos sonoros

Disable specular reflections on textured objects Desativa a reflexao especular sobre objetos texturizados

Disable splash screen Desativa tela de abertura

Disable automatic scenery downloads/updates Desativa o download/atualizacao automatica de cenarios

Disable texture cache (DDS)

Disable textures Desativa as texturas

Disable VR

Disable wireframe drawing mode Desativa o modo de desenho aramado

Slave the DME to one of the NAV radios, or set its internal frequency. Define como escravo o DME para uma das radios NAV, ou define sua frequencia interna.

Base directory to use for aircraft and scenery downloads (the TerraSync scenery directory may be specifically set with --terrasync-dir)

Enable AI subsystem (required for multi-player, AI traffic and many other animations) Ativar trafego interativo (necessario para multi-jogador, trafego IA e muitas outras animacoes)

Enable artificial traffic. Ativar trafego artificial.

Enable anti-aliased HUD Ativa o visor holografico (HUD) com anti-serrilhado

Enable auto coordination Ativa a auto-coordenacao

Do not advance clock Nao avanca o relogio

Enable 2D (flat) cloud layers Ativar as camadas de nuvens 2D (planas)

Enable 3D (volumetric) cloud layers Ativar as camadas de nuvens 3D (volumetricas)

Enable runway light distance attenuation Ativa a atenuacao da distancia das luzes da pista

Enable enhanced runway lighting Ativa a iluminacao melhorada das pistas

Enable FGCom built-in

Start in a frozen state Comece em um estado congelado

Fuel tank quantity forced to remain constant Quantidade do tanque de combustivel forcada a permanecer constante

Enable fullscreen mode Ativa o modo tela cheia

Enable celestial body growth illusion near the horizon Ativa a ilusao do crescimento de corpos celestes perto do horizonte

Enable 3D HUD Ativa o visor holografico (HUD) 3D

Enable Heads Up Display (HUD) Ativa visor holografico (HUD)

Enable extra mouse pointer Ativar ponteiro adicional do mouse

(i.e. for full screen Voodoo based cards) (i.e. para placas do tipo Voodoo tela cheia)

Enable instrument panel Ativa o painel de instrumentos

Include random buildings objects Adicionar edificios aleatorios

Include random scenery objects Adicionar objetos aleatorios do cenario

Include random vegetation objects Adicionar objetos aleatorios de vegetacao

Enable METAR based real weather fetching (this requires an open internet connection) Ativar a busca de clima real baseada em METAR (isto requer uma conexao a Internet)

Allow saving preferences at program exit Permitir salvar preferencias ao sair do programa

Enable crash and error reports to be sent to the development team for analysis

Enable sound effects Ativa efeitos sonoros

Enable specular reflections on textured objects Ativa a reflexao especular sobre objetos texturizados

Enable splash screen Ativa tela de abertura

Enable automatic scenery downloads/updates Ativa o download/atualizacao automatica de cenarios

Enable texture cache (DDS)

Enable textures Ativa as texturas

Enable VR

Enable wireframe drawing mode Ativa o modo de desenho aramado

Environment Options Opcoes de ambiente

Fail the pitot, static, vacuum, or electrical system (repeat the option for multiple system failures). Falhar o sistema de pitot, vacuo, estatico, ou sistema eletrico (repetir a opcao para multiplas falhas do sistema).

Select the core flight dynamics model Seleciona o nucleo dos modelos de dinamica de voo

Can be one of jsb, larcsim, yasim, magic, balloon, ada, external, or null Pode ser: jsb, larcsim, yasim, magic, balloon, ada, external, ou nulo

Flight Model Modelo de Voo

Features Caracteristicas

Specify additional aircraft directory path(s) (alternatively, you can use --aircraft-dir to target a specific aircraft in a given directory) Especifica o caminho do diretorio de aeronaves adicionais

Specify the root data path Especifica a pasta de dados raiz

Specify the scenery path(s); Especifica o caminho da pasta de cenario(s);

Defaults to $FG_ROOT/Scenery Por padrao e $FG_ROOT/Scenery

Use a model viewer rather than load the entire simulator; Utilizar um visualizador do modelo, em vez de carregar o simulador inteiro;

Specify starting position relative to a fix Especifica a posicao inicial relativa a um fixo

Open connection using the Flarm protocol, which includes NMEA/GPS and traffic reporting messages

Read all waypoints from a file Ler todos os waypoints de um arquivo

Disable fog/haze Desativa nevoeiro/neblina

Enable fastest fog/haze Ativar rapido nevoeiro/neblina

Enable nicest fog/haze Ativar o melhor nevoeiro/neblina

Specify field of view angle Especifica o campo do angulo de visao

Abort on encountering a floating point exception; Abortar ao encontrar uma excecao de ponto flutuante;

Open connection using the Garmin GPS protocol Abrir conexao usando o protocolo Garmin GPS

General Options Opcoes Gerais

Open connection using a predefined communication interface and a preselected communication protocol Abrir conexao usando uma interface predefinida de comunicacao e um protocolo pre selecionado de comunicacao

Specify window geometry (640x480, etc) Especifica a geometria das janelas (640x480, etc)

Specify flight path angle (can be positive) Especifica o angulo da trajetoria de voo (pode ser positivo)

GMT

Set graphic options from one of the presets

Specify heading (yaw) angle (Psi) Especifica o angulo da direcao (rota) (Psi)

Show the most relevant command line options Exibe as opcoes mais relevantes da linha de comando

Enable http server on the specified address. Specify the port or address:port to bind to. Ativa o servidor http na porta especificada

Hud displays percentage of triangles culled HUD exibe uma porcentagem dos triangulos perdidos

Hud Options Opcoes do HUD

Hud displays number of triangles rendered HUD exibe o numero de triangulos renderizados

Open connection using the International Gliding Commission protocol

Ignore the autosave file, i.e. the settings saved in this file will not be loaded during startup, nor will the settings be saved to this file when closing the simulator

Start in air (implied when using --altitude) iniciar no ar (implicado a usar --altitude)

IO Options Opcoes ES

Open connection to an Agwagon joystick Abrir conexao para um joystick Agwagon

Enable screen shot http server on the specified port (replaced by --httpd) Ativa captura de tela no servidor http na porta especificada (replaced by --httpd)

Log JSBSim properties in a CSV file. An output directives file contains an <output type="CSV"></output> element, within which should be specified the parameters or parameter groups that should be logged.

Open connection to a remote joystick Abrir conexao para um joystick remoto

Print a report in JSON format on the standard output, giving information such as the FlightGear version, $FG_ROOT, $FG_HOME, aircraft and scenery paths, etc.

Select the language for this session Seleciona o idioma para esta sessao

Starting latitude (south = -) Latitude inicial (sul = -)

Use GUI launcher

Select aircraft livery Seleciona a pintura da aeronave

Load recording of earlier FlightGear session. For <name>, if <name> ends with .fgdata it is treated as the local path of the recording file; otherwise we form the local path by prepending <name> with the tape directory and appending ".fgtape". For <url> (starting with http:// or https://) we download the remote recording (which must be a Continuous recording) in the background to a url-dependent filename while replaying it; if the url-dependent filename already exists it is assumed to be a truncated download and we only download any remaining data.

local aircraft time

Specify the detail levels, where levels are a space-separated numeric list of levels. The default is "1 3 5 7 9".

Specify the range multiplier (point from low to fine detail). Defaults is 2.

Specify the resolution of the terrain grid. Defaults is 1.

Specify the method of texturing the terrain. The default is bluemarble.

Specify which logging class(es) to use Especifica que classe(s) de registro de log utilizar

Log to directory DIR. The special value 'desktop' causes logging to the desktop (OS-dependent location). This option may be given several times, using a different value each time. Inside the specified directory, the written log file is named FlightGear_YYYY-MM-DD_<num>.log, where <num> takes the values 0, 1, 2, etc.

Specify which logging level to use Especifica que nivel de registro de log utilizar

Starting longitude (west = -) Longitude inicial (oeste = -)

Specify initial mach number Especifica o numero MACH inicial

Specify the materials file used to render the scenery (default: Materials/regions/materials.xml) Especifica o arquivo de materiais utilizados para renderizar o cenario (por padrao: materials.xml)

Maximum frame rate in Hz.

Pass a METAR string to set up static weather (this implies --disable-real-weather-fetch) Passar um METAR para configurar clima estatico

Allows you to define a minimum status level (=development status) for all listed aircraft Permite definir um nivel minimo de status (=status de desenvolvimento) para todas as aeronaves listadas

Run the FDM this rate (iterations per second) Executar o MDV com esta taxa (interacoes por segundo)

Specify multipilot communication settings; Especifica a configuracao das comunicacoes multipiloto

MultiPlayer Options Opcoes de Multijugador

multiple instances can be used

Open connection using the FG Native Controls protocol Abrir conexao usando o protocolo FG Native Controls

Open connection using the FG Native protocol Abrir conexao usando o protocolo FG Native

Open connection using the FG Native FDM protocol Abrir conexao usando o protocolo FG Native FDM

Open connection using the FG Native GUI protocol Abrir conexao usando o protocolo FG Native GUI

Set the NAV1 radio frequency, optionally preceded by a radial. Define a frequencia de radio NAV1, opcionalmente precedida por um radial.

Set the NAV2 radio frequency, optionally preceded by a radial. Define a frequencia de radio NAV2, opcionalmente precedida por um radial.

Specify starting position relative to an NDB Especifica a posicao inicial relativa a um NDB

Specify the frequency of the NDB. Use with --ndb=ID

Network Options Opcoes de rede

Open connection using the NMEA protocol Abrir conexao usando o protocolo NMEA

Do not load any default configuration files (like .fgfsrc) unless explicitly specified with --config.

Do NOT attempt to trim the model NAO tentar compensar o modelo

(only with fdm=jsbsim) (apenas com MDV=jsbsim)

Specify heading to reference point Especifica aa direcao para o pontode referencia

Specify distance to reference point (nautical miles) Especifica a distancia para um ponto de referencia (em milhas estatutarias)

Start at ground level (default) Iniciar no nivel do chao (padrao)

Open connection using the OpenGC protocol Abrir conexao usando o protocolo OpenGC

Specify parking position at an airport (must also specify an airport) Especifica a posicao de estacionamento de um aeroporto (tambem deve especificar um aeroporto)

Same as the --parking-id option Especifica em que posicao inicia em um porta-avioes IA (precisa especificar o porta-avioes)

Specify pitch angle (Theta) Especifica o angulo de inclinacao (Theta)

Initial Position and Orientation Posicao e Orientacao Iniciais

Set property <name> to <value>. <type> can be one of string, double, float, long, int, or bool. Define a propriedade e<nome> para <valor>. O <tipo> pode ser uma cadeia de caracteres (string), duplo (double), flutuante (float), longo (long), inteiro (int), booleano (bool).

Open connection using the interactive property manager Abrir conexao usando o gerenciador interativo de propriedades

Specify which proxy server (and port) to use. The username and password are optional and should be MD5 encoded already. This option is only useful when used in conjunction with the real-weather-fetch option. Especifica qual servidor proxy (e porta) serao utilizados. O nome de usuario e senha sao opcionais e precisam ter codificacao MD5. Esta opcao e util apenas quando utilizada em conjunto com a opcao real-weather-fetch.

Open connection using the PVE protocol Abrir conexao usando o protocolo PVE

(buildings, etc.) (edificios, etc.)

Set up random wind direction and speed Especifica uma direcao e velocidade do vento aleatoria

Open connection using the Ray Woodworth motion chair protocol Abrir conexao usando o protocolo Ray Woodworth motion chair

Make $FG_HOME read-only

Rendering Options Opcoes de Renderizacao

Open Launcher automatically when exiting FlightGear

Reset all user settings to their defaults (rendering options etc) Restaurar todas as configuracoes do usuario para seus padroes (opcoes de renderizacao etc)

Specify initial climb rate (can be negative) Especifica a taxa de subida inicial (pode ser negativa)

Specify roll angle (Phi) Especifica o angulo de rolagem (Phi)

Route/Way Point Options Opcoes de Rota/Way Point

Open connection using the RUL protocol Abrir conexao usando o protocolo RUL

Specify starting runway (must also specify an airport) Especifica o inicio na pista (e necessario escolher um aeroporto)

Enable flat shading Ativa o sombreamento plano

Enable smooth shading Ativa o sombreamento suavizado

Print a list of the currently available aircraft types Exibe uma lista dos tipos de aeronaves disponiveis atualmente

Show a list of available audio device Exibe uma lista de dispositivos de audio disponiveis

Situation Options Opcoes de Emergencias

Explicitly specify the audio device to use Especifica expressamente o dispositivo de audio para usar

Run the FDM 'n' times faster than real time Executar o MDV 'n' vezes mais rapido que o tempo real

Specify a starting date/time with respect to Especifica uma data/tempo inicial com respeito a

Specify the initial state of the aircraft to the given value

system time

Enable telnet server on the specified port Ativa o servidor telnet na porta especificada

Specify the terrain engine you want to use: tilecache or pagedLOD

Set target directory for scenery downloads Especifica o diretorio para download de cenarios

Specify the DDS texture cache directory to be different than the default location

Anisotropic Texture Filtering: values should be 1 (default), 2, 4, 8 or 16 Filtragem de textura anisotropica: os valores devem ser 1 (padrao),2,4,8 ou 16

Synchronize time with local real-world time Sincronizar hora com a hora local

Synchronize time with real-world time Sincronizar hora com a hora do mundo real

Add this time offset Adiciona um incremento de tempo

Time Options Opcoes de Tempo

Specify a time of day Especifica a hora do dia

Trace the reads for a property; Traca as leituras de uma propriedade;

Trace the writes for a property; Traca as escritas de uma propriedade;

Trim the model Compensar o modelo

(only with fdm=jsbsim) (apenas com MDV=jsbsim)

Specify turbulence from 0.0 (calm) to 1.0 (severe) Especifica turbulencias desde 0.0 (calmas) ate 1.0 (severas)

Specify velocity along the body X axis Especifica a velocidade ao longo do eixo X do corpo

Remove $FG_HOME directory. For Windows, it additionally removes TerraSync, Aircraft and TextureCache directories from download directory.

Use feet for distances Usar pes para distancias

Use meters for distances Usar metros para distancias

Usage: fgfs [ option ... ] Uso: fgfs [ opcao ... ]

Use with --terrain-engine=pagedLOD

Specify velocity along the body Y axis Especifica a velocidade ao longo do eixo Y do corpo

Specify velocity along a vertical axis Especifica a velocidade ao longo de um eixo vertical

Specify velocity along a West-East axis Especifica a velocidade ao longo de um eixo Oeste-Este

Specify velocity along a South-North axis Especifica a velocidade ao longo de um eixo Sul-Norte

Specify initial airspeed Especifica a velocidade inicial do vento

Same as the --aircraft option Selecionar um perfil de veiculo definido por um <nome>-set.xml de nivel superior

Show all command line options when combined with --help or -h Exibe todas as opcoes da linha de comando quando combinado com --help ou -h

For a complete list of options use --help --verbose Para obter uma lista completa de opcoes use --help --verbose

Display the current FlightGear version Exibe a versao atual do FlightGear

Specify the default forward view direction as an offset from straight ahead. Allowable values are LEFT, RIGHT, CENTER, or a specific number in degrees Especifica a direcao padrao da visao a frente, com um incremento adiante. Os valores validos sao LEFT (esq.), RIGHT (dir.), CENTER (centro), ou um numero especifico em graus

Specify initial visibility in meters Especifica a visibilidade inicial

Specify initial visibility in statute miles Especifica a visibilidade inicial em milhas

Specify starting position relative to a VOR Especifica a posicao inicial relativa a um VOR

Specify the frequency of the VOR. Use with --vor=ID

Specify velocity along the body Z axis Especifica a velocidade ao longo do eixo Z do corpo

Specify wind coming from DIR (degrees) at SPEED (knots) Especifica o vento vindo da DIRECAO (graus) e VELOCIDADE (nos)

Specify a waypoint for the GC autopilot; Especifica o waypoint para o piloto automatico GC;

binding subsystems ligando subsistemas

creating subsystems criando subsistemas

downloading scenery

Error loading 3D model

Errors occured loading aircraft systems (fuel, electrical, hydrualics)

Audio FX description contains errors

Errors loading terrain (BTG)

The add-on '%VALUE%' contains errors. Please report this to the add-on developers.

This aircraft (%VALUE%) contains errors. This may include visual issues, or the aircraft might not fly at all. Check for an updated version of the aircraft from its developers.

The selected aircraft (%VALUE%) contains errors. This may cause visual issues, or the aircraft might not fly at all. Please report the information below to the aircraft hangar's maintainers.

The custom scenery at '%VALUE%' contains errors. Parts may be missing, or the scenery may not load at all. Check for an updated version of the scenery.

Errors were found loading the core simulator files (FGData). This usually indicates a problem with the installation, or your local disk.

The joystick (input device) '%VALUE%' couldn't be loaded correctly. This usually means its configuration file is incorrect.

Loading a model for another pilot (via multi-player) failed. The other pilot will appear as a default model. (You can disable these errors from the multiplayer settings dialog)

Allocating memory failed. Some resources will not be loaded. Adjust your settings to reduce view distance or number of objects loaded.

The scenario '%VALUE%' contains errors, and may not work correctly.

Problems occurred loading visual effects (shaders). This can cause objects to be invisible or appear incorrect. It can sometimes be fixed by changing rendering settings inside FlightGear, or occasionally, by updating the drivers for your graphics card.

Scenery downloaded via TerraSync is not loading correctly. The usually indicates a problem with your network connection or local disk.

Problems occured loading simulated aircaft traffic: some traffic may not appear.

Errors occurred in an unknown part of FlightGear. Please report this bug to the FlightGear development team.

Errors loading user-interface

Errors loading input device configuration

Texture failed to load

Shader / Effect problems

This dialog is work-in-progress. The information included above may not be fully correct, so please check the detailed information below and give feedback if something seems wrong. Please include all the information below, as well as the message above.

Errors loading scenery

Errors downloading scenery from TerraSync

File or resource is invalid or corrupted

File or resource header is incorrect

Unable to read/write files correctly (check permissions and disk space)

The resource contains a configuration problem

Network connection failure

The file or resource was not found

Unable to allocate sufficient memory

Unknown error

Scripted loading of XML failed

Errors loading model XML

finalizing position finalizando posicao

finalizing subsystems finalizando subsistemas

initializing inicializando

initializing graphics engine inicializando o motor grafico

initializing scenery inicializando cenarios

initializing subsystems inicializando subsistemas

loading aircraft carregando aeronaves

loading aircraft list carregando lista de aeronaves

loading navigation data carregando dados de navegacao

loading scenery carregando cenarios

loading fixes

[VALUE]% complete

loading airport data

loading navigation aid data

loading points of interest

reading airport data

extracting [VALUE]

Saved settings were migrated from a previous version of FlightGear. If you encounter any problems when using the system, try restoring the default settings, before reporting a problem. Saved settings can affect the appearance, performance and features of the simulator.

Settings migrated

Unstable nightly build - some features may be under active development

Drag while holding the right mouse button to look around

Hold Ctrl while looking around to move the view up, down, left or right

Press a/A to adjust the simulation speed

Press x/X to zoom in and out

Find frequencies of nearby ATC services from the Radios dialog

Press v to change your viewpoint, Ctrl-V to return to the cockpit

Press F3 to take a screenshot

Join the FlightGear community at http://forum.flightgear.org

Press h to bring up a Heads Up Display

Show or hide the menu bar by pressing F10

Frame-rate too low? - try disabling AI traffic

Select Environment → Weather to fly in different weather

Press F12 to change the radio frequencies easily

Look around by holding down the right mouse button and moving the mouse

Select Multiplayer → Multiplayer Settings to join the shared flight environment

Can't get the engine started? - see Help → Aircraft Checklists

Drag while holding the middle and right mouse buttons to move the viewpoint

Press / to explore the internals of the simulator

Press Tab to move the viewpoint with your mouse and use the scroll wheel to zoom

The border of a high pressure region, in which the airmass becomes unstable and various convective and stratiform clouds may appear.

Border of a high pressure region

The border of a low pressure region, in which the airmass is unstable and convective clouds start to form layers and merge into stratiform clouds.

Border of a low pressure region

If you just got your IFR rating, this is what you are allowed to do. But can you?

CAT I minimum

This is expert level. You will barely see the taxiway from the cockpit, even if you are on ground. Fog and light drizzle, freezing level at 1000ft.

CAT IIIb minimum

With just a 1/4 mile visibility and clouds at 100ft, you don't see much of the runway until seconds before touchdown. Trust your instruments to stay alive.

CAT II minimum

The center of a high pressure region, characterized by descending air and hence only weak cloud development with high visibility.

Core high pressure region

The core of a low pressure region, characterized by overcast clouds, bad visibility on the ground and significant rainfall.

Core low pressure region

Fog developed this autumn's morning. Expect good visibility above the layer. However - getting through it can be a challenge. Stay alive for a 500' climb and you'll see the sun!

Early morning fog

A lovely day for trip to your favorite 100$ hamburger airfield

Fair weather

A high pressure region, characterized by moderate to strong Cumulus development in the afternoon and fairly good visibility conditions.

High pressure region

Fetch live weather data for your nearest airport from noaa.gov. You need a working internet connection. Weather is generated automatically, once a valid METAR is received.

Live data

A low pressure region, characterized by rising air, widespread formation of stratiform clouds and beginning rain.

Low pressure region

Enter your favorite METAR weather. A valid METAR syntax is required.

Manual input

After the storm - limited visibility and some showers. Go or No-Go?

Marginal VFR

You're out for an adventure? Gusty winds blowing from the west and isolated thunderstorms should be avoided. Fasten your seatbelt!

Stormy Monday

A hot and damp summer day with thunderstorms developing in the afternoon. Be prepared for reduction of visibility in showers and strong gusts near thunderstorms

Thunderstorm

A warm sector, characterized by high moisture in the air and haze extending up to high altitudes, but otherwise largely convective cloud development.

Warm sector