MODEL COMBINED EFFECT - INSTRUCTIONS FOR USE
============================================

The model-combined effect uses the ubershader to provide any or all of diffuse,
light-map, reflection, bump-mapping and dirt effects on the model on which it is
applied. The effect responds to the quality setting of the "Model" slider in the
advanced shader configuration, in the following order:

-------------------------------------------------------------------------------
*lowest quality     - enables light-map and dirt, if enabled by the effect;

*medium quality     - enables reflection too, if enabled in the effect;

*highest quality    - enables bump-mapping too, if enabled in the effect.
-------------------------------------------------------------------------------

To use this on your aircraft model, you are advised to create a local effect
that has the following lines:


1. for automatic Rembrandt support on opaque objects use this:

 <name>my-aircraft-effect</name>
 <inherits-from>Effects/model-combined-deferred</inherits-from>
 

2. for automatic Rembrandt support on transparent objects (glass) use this:

 <name>my-aircraft-glass-effect</name>
 <inherits-from>Effects/model-combined-transparent</inherits-from>

The only modeller-adjustable settings are those found in the parameters section
and listed here. There are other entries in the parameters section, but those
are for internal use only, please don't mess with them.

You only need to list in your local effect those entries that you'll modify from
the defaults, there's no need to repeat all of them.

Following is the list of parameters, their default setting and a short
explanation of what they control/affect

--------------------------------------------------------------------------------

<texture n ="0">

          - the model texture, as assigned in the 3d-modelling
          application, or by the livery select mechanism.
          This only needs to be present in the main effect.
          Setting this to some specific texture will override
          the assigned texture/livery.


Bumpmap control:
===================

-------------------------------------------------------------------------------
WARNING!!! Enabling this requires further modification to the local effect.
Please see the attached model-combined-nmap.eff stub for correct usage.
-------------------------------------------------------------------------------

<normalmap-enabled type="int">0</normalmap-enabled>

           - enables bump-mapping (if quality is set high enough).
            Default value is off.
            Available values are 0 (off) and 1(on).
            Leave off if you're not using it.

 
 <normalmap-dds type="int">0</normalmap-dds>
 
           - enable this if you're using a .dds compressed normal-map.
            Default value is 0 (off).
            Available values are 0 (off) and 1(on)

		   
 <normalmap-tiling type="float">1.0</normalmap-tiling>

           - sets the repeat rate of the normal-map image, useful for covering
            large areas with fine detail.
            Default value is 1.0 (no-tiling).
            If you set this to a value > 1.0, you need
            to set wrapping mode to repeat below.

<texture n="2">

          - the normal-map texture slot


  <image></image>

          - the normal-map texture path

 
  <wrap-s>clamp</wrap-s>

          - X-axis (U) wrapping mode of the texture.
           Default is set to clamp.
           If you enable the tiling feature (normalmap-tiling > 1.0), you need
           to set this to repeat.
 
  <wrap-t>clamp</wrap-t>

          - same as above for the Y-axis (V).

</texture>

-------------------------------------------------------------------------------

Lightmap control:
===================


<lightmap-enabled type="int">0</lightmap-enabled>

          - enables the light-map.
           Default value is 0 (off).
           Available values are 0 (off) and 1(on).
           If you want control over your light-maps enable this
           and use a variable property as factor.

          
<lightmap-multi type="int">0</lightmap-multi>

          - this enables multiple light-maps per light-map texture.
           Default value is 0 (off).
           Available values are 0 (off) and 1(on).
           When off the shader code uses information from
           the red channel of the light-map.

          
<lightmap-factor type="float" n="0">1.0</lightmap-factor>

          - factor to multiply the value of the red channel in the light-map.
           Default value is 1.0.
           This product is used as a resulting factor for
           the final light-map color.

          
<lightmap-color type="vec3d" n="0"> 1.0 1.0 1.0 </lightmap-color>

          - the color of the light for the red channel in the light-map.
            Default value is white (1.0 1.0 1.0).

          
<lightmap-factor type="float" n="1">1.0</lightmap-factor>

          - same as above for the green channel.


<lightmap-color type="vec3d" n="1"> 1.0 1.0 1.0 </lightmap-color>

          - same as above for the green channel.

          
<lightmap-factor type="float" n="2">1.0</lightmap-factor>

          - same as above for the blue channel.


<lightmap-color type="vec3d" n="2"> 1.0 1.0 1.0 </lightmap-color>

          - same as above for the blue channel.


<lightmap-factor type="float" n="3">1.0</lightmap-factor>

          - same as above for the alpha channel.

          
<lightmap-color type="vec3d" n="3"> 1.0 1.0 1.0 </lightmap-color>

          - same as above for the alpha channel.

          
<texture n="3">

          - the light-map texture slot.

          
 <image>Aircraft/Generic/Effects/greymap.png</image>

          - the light-map texture path.

          
 <filter>linear-mipmap-linear</filter>
 <wrap-s>clamp</wrap-s>
 <wrap-t>clamp</wrap-t>
 <internal-format>normalized</internal-format>
</texture>

-------------------------------------------------------------------------------

Reflection control:
===================
.

<reflection-enabled type="int">0</reflection-enabled>

          - enables reflection (if user preference is high enough).
          Default value is 0 (off).
          Available values are 0 (off) and 1(on).


<reflection-correction type="float">0.0</reflection-correction>

          - factor to add to the material specularity to give
          the final reflection factor.
          Default value is  0.0 (no correction).
          Accepts values from -1.0 to 1.0.
          If reflection-map is enabled below, this factor is added to the product
          between the alpha channel of the texture and the material specularity.


<reflect-map-enabled type="int">0</reflect-map-enabled>

          - enables the usage of a texture to determine reflection intensity.
          Default value is 0 (off).
          Available values are 0 (off) and 1(on).


<reflection-dynamic type="int">0</reflection-dynamic>

          - enables dynamic reflections.
          Default value is 0 (off).
          Available values are 0 (off) and 1(on).
          The reflection gets rotated according to the object orientation,
          trying to keep the ground in the reflection on faces facing the ground.
          Recommended setting for external reflections is 1 (on).
          For internal (cockpit, instruments) leave it at 0 (off).



<texture n="4">

          - texture slot for the reflect-map. This map is also used for the dynamic dirt.

          
  <image>Aircraft/Generic/Effects/ReflectMaps/reflectmap.png</image>

          - reflect-map texture path.


  <filter>linear-mipmap-linear</filter>
  <wrap-s>clamp</wrap-s>
  <wrap-t>clamp</wrap-t>
  <internal-format>normalized</internal-format>
</texture>


Reflection env-map:
-------------------

<texture n="5">

          - texture slot for the texture(s) used to create
          the cubic environment that is reflected

          
  <type>cubemap</type>

    There are two ways of defining the environment texture:
    1: a cubecross texture where all faces of the cube are stitched into one texture:

  <image>Aircraft/Generic/Effects/CubeCrosses/blue_sky_big.jpg</image>

    or

    2: 6 different textures, one for each face of the environment cube:

  <images>
    <positive-x>Aircraft/Generic/Effects/CubeMaps/fair-sky/fair-sky_px.png</positive-x>
    <negative-x>Aircraft/Generic/Effects/CubeMaps/fair-sky/fair-sky_nx.png</negative-x>
    <positive-y>Aircraft/Generic/Effects/CubeMaps/fair-sky/fair-sky_py.png</positive-y>
    <negative-y>Aircraft/Generic/Effects/CubeMaps/fair-sky/fair-sky_ny.png</negative-y>
    <positive-z>Aircraft/Generic/Effects/CubeMaps/fair-sky/fair-sky_pz.png</positive-z>
    <negative-z>Aircraft/Generic/Effects/CubeMaps/fair-sky/fair-sky_nz.png</negative-z>
  </images>
</texture>


<reflection-fresnel type="float">0.1</reflection-fresnel>

          - fresnel(banding) factor for the reflection.
           Default value is 0.1.
           Values range from -1.0 to 1.0.

        
<texture n="6">

          - fresnel texture slot
        
  <image>Aircraft/Generic/Effects/FresnelLookUp.png</image>

          - fresnel(banding) texture path

        
  <filter>linear-mipmap-linear</filter>
  <wrap-s>repeat</wrap-s>
  <wrap-t>repeat</wrap-t>
  <internal-format>normalized</internal-format>
</texture>


<reflection-rainbow type="float">0.01</reflection-rainbow>

          - rainbow factor for the reflection.
           Default value is 0.01.
           Values range from -1.0 to 1.0.

         
<texture n="7">

          - rainbow texture slot.

        
  <image>Aircraft/Generic/Effects/Rainbow.png</image>

          - rainbow texture path.

        
  <filter>linear-mipmap-linear</filter>
  <wrap-s>repeat</wrap-s>
  <wrap-t>repeat</wrap-t>
  <internal-format>normalized</internal-format>
</texture>


<reflection-noise type="float">0.25</reflection-noise>

          - Amount of color noise to be added to the reflected image.
          Default value is 0.25.
          Accepts values from 0.0 to 1.0.

-------------------------------------------------------------------------------

Dirt/Grit Control:
==================

<dirt-enabled type="int">0</dirt-enabled>

          - enables dynamic dirt in the shader.
          Default value is 0(off).
          Available values are 0 (off) and 1(on).
          This uses the red channel of the texture in slot 4 (reflection map)
          to define areas that should be dirtied up.
          You don't have to enable 'reflect-map-enabled' above to use this.

         
<dirt-color type="vec3d">0.0 0.0 0.0</dirt-color>

          - color of the dirt added. Default is black (0.0 0.0 0.0).

        
<dirt-factor type="float">0.0</dirt-factor>

          - factor to control how intense the dirt is drawn.
          Default value is 0.0.
          This should use a dynamic property settable at runtime.

-------------------------------------------------------------------------------
          
Ambient Correction:
===================

<ambient-correction type="float">0.05</ambient-correction>

          - factor by which to lighten/darken the final result, and to remove
          some of the blueness induced by some of the reflection environments.
          Default value is 0.05.
          Values range from -1.0 to 1.0.

-------------------------------------------------------------------------------


FINAL WARNINGS:
=====================

To repeat the earlier warning:

  Do NOT use in any situation the normal-map enabled effect on objects that
  are NOT completely uv-mapped to a texture, and/or that texture is not available
  at runtime.
  The binormal/tangent generator needs the texture information at runtime,
  failing to find this it crashes, causing a segfault for FlightGear.

To fix culling/sorting problems:

  This effect forces objects into Render-Bin 1.
  This makes it necessary to use a specially modified local effect
  for transparent objects.
  This is provided as a stub in model-combined-glass.eff that you can find in
  the same directory along with this ReadMe.