<?xml version="1.0"?> <!-- ************************************************************************ Common configuration for all C310 models. ************************************************************************ --> <PropertyList> <sim> <systems> <electrical> <path>Aircraft/c310/c310-electrical.xml</path> </electrical> </systems> <sound> <audible>true</audible> <path>Aircraft/c310/c310-sound.xml</path> </sound> </sim> <controls> <engines> <engine n="0"> <magnetos>3</magnetos> </engine> <engine n="1"> <magnetos>3</magnetos> </engine> </engines> </controls> <consumables> <fuel> <tank n="0"> <level-gal_us archive="y">14</level-gal_us> </tank> <tank n="1"> <level-gal_us archive="y">14</level-gal_us> </tank> <tank n="2"> <level-gal_us archive="y">14</level-gal_us> </tank> <tank n="3"> <level-gal_us archive="y">14</level-gal_us> </tank> </fuel> </consumables> <engines> <engine n="0"> <rpm>1000</rpm> </engine> <engine n="1"> <rpm>1000</rpm> </engine> </engines> <autopilot> <config> <min-climb-speed-kt type="float">81.0</min-climb-speed-kt> <best-climb-speed-kt type="float">107.0</best-climb-speed-kt> <target-climb-rate-fpm type="float">1000.0</target-climb-rate-fpm> <target-descent-rate-fpm type="float">1000.0</target-descent-rate-fpm> <elevator-adj-factor type="float">3000.0</elevator-adj-factor> <integral-contribution type="float">0.004</integral-contribution> <zero-pitch-throttle type="float">0.45</zero-pitch-throttle> <zero-pitch-trim-full-throttle type="float">0.11</zero-pitch-trim-full-throttle> </config> </autopilot> <input> <keyboard> <key n="60"> <name><</name> <desc>Rudder Trim Left</desc> <binding> <command>property-adjust</command> <property>/controls/flight/rudder-trim</property> <min type="double">-1.0</min> <step type="double">-0.001</step> </binding> </key> <key n="62"> <name>></name> <desc>Rudder Trim Right</desc> <binding> <command>property-adjust</command> <property>/controls/flight/rudder-trim</property> <max type="double">1.0</max> <step type="double">0.001</step> </binding> </key> </keyboard> </input> </PropertyList>