// WS30 FRAGMENT SHADER // -*-C++-*- #version 130 #extension GL_EXT_texture_array : enable // written by Thorsten Renk, Oct 2011, based on default.frag ////////////////////////////////////////////////////////////////// // TEST PHASE TOGGLES AND CONTROLS // // Development tools: // Reduce haze to almost zero, while preserving lighting. Useful for observing distant tiles. // Keeps the calculation overhead. This can be used for profiling. // Possible values: 0:Normal, 1:Reduced haze. const int reduce_haze_without_removing_calculation_overhead = 0; // Remove haze and lighting and shows just the texture. // Useful for checking texture rendering and scenery. // The compiler will likely optimise out the haze and lighting calculations. // Possible values: 0:Normal, 1:Just the texture. const int remove_haze_and_lighting = 0; // Use built-in water shader. Use for testing impact of ws30-water.frag const int water_shader = 1; // // End of test phase controls ////////////////////////////////////////////////////////////////// // written by Thorsten Renk, Oct 2011, based on default.frag // Ambient term comes in gl_Color.rgb. varying vec4 light_diffuse_comp; varying vec3 normal; varying vec3 relPos; varying vec2 ground_tex_coord; varying vec2 rawPos; varying vec3 worldPos; // Testing code: //vec3 worldPos = vec3(5000.0, 6000.0, 7000.0) + vec3(vec2(rawPos), 600.0); // vec3(100.0, 10.0, 3.0); //varying vec2 orthoTexCoord; varying vec4 eyePos; uniform sampler2D landclass; uniform sampler2DArray textureArray; uniform sampler2D perlin; //varying float yprime_alt; //varying float mie_angle; varying float steepness; uniform float visibility; uniform float avisibility; uniform float scattering; uniform float terminator; uniform float terrain_alt; uniform float hazeLayerAltitude; uniform float overcast; uniform float eye_alt; uniform float snowlevel; uniform float dust_cover_factor; uniform float lichen_cover_factor; uniform float wetness; uniform float fogstructure; uniform float snow_thickness_factor; uniform float cloud_self_shading; uniform float season; uniform int quality_level; uniform int tquality_level; // Passed from VPBTechnique, not the Effect uniform float fg_tileWidth; uniform float fg_tileHeight; uniform bool fg_photoScenery; uniform vec4 fg_dimensionsArray[128]; uniform vec4 fg_ambientArray[128]; uniform vec4 fg_diffuseArray[128]; uniform vec4 fg_specularArray[128]; uniform vec4 fg_textureLookup1[128]; uniform vec4 fg_textureLookup2[128]; uniform vec4 fg_materialParams1[128]; uniform vec4 fg_materialParams3[128]; uniform mat4 fg_zUpTransform; uniform vec3 fg_modelOffset; // Coastline texture - generated from VPBTechnique uniform sampler2D coastline; const float EarthRadius = 5800000.0; const float terminator_width = 200000.0; //Testing phase: Why are these in global scope in WS2 shaders? float alt; float eShade; float yprime_alt; float mie_angle; float shadow_func (in float x, in float y, in float noise, in float dist); float DotNoise2D(in vec2 coord, in float wavelength, in float fractionalMaxDotSize, in float dot_density); float Noise2D(in vec2 coord, in float wavelength); float Noise3D(in vec3 coord, in float wavelength); float SlopeLines2D(in vec2 coord, in vec2 gradDir, in float wavelength, in float steepness); float Strata3D(in vec3 coord, in float wavelength, in float variation); float fog_func (in float targ, in float alt); float rayleigh_in_func(in float dist, in float air_pollution, in float avisibility, in float eye_alt, in float vertex_alt); float alt_factor(in float eye_alt, in float vertex_alt); float light_distance_fading(in float dist); float fog_backscatter(in float avisibility); vec3 rayleigh_out_shift(in vec3 color, in float outscatter); vec3 get_hazeColor(in float light_arg); vec3 searchlight(); vec3 landing_light(in float offset, in float offsetv); vec3 filter_combined (in vec3 color) ; float getShadowing(); vec3 getClusteredLightsContribution(vec3 p, vec3 n, vec3 texel); ////////////////////////// // Test-phase code: // These should be sent as uniforms // Tile dimensions in meters // vec2 tile_size = vec2(tile_width , tile_height); // Testing: texture coords are sent flipped right now: // Note tile_size is defined in the shader include: ws30-landclass-search-functions.frag. // vec2 tile_size = vec2(tile_height , tile_width); // From noise.frag float rand2D(in vec2 co); // Create random landclasses without a texture lookup to stress test. // Each square of square_size in m is assigned a random landclass value. int get_random_landclass(in vec2 co, in vec2 tile_size); // End Test-phase code //////////////////////// // These functions, and other function they depend on, are defined // in ws30-ALS-landclass-search.frag. // Lookup a ground texture at a point based on the landclass at that point, without visible // seams at coordinate discontinuities or at landclass boundaries where texture are switched. // The partial derivatives of the tile_coord at the fragment is needed to adjust for // the stretching of different textures, so that the correct mip-map level is looked // up and there are no seams. // Texture types: 0: base texture, 1: grain texture, 2: gradient texture, 3 dot texture, // 4: mix texture, 5: detail texture. vec4 lookup_ground_texture_array(in int texture_type, in vec2 ground_texture_coord, in int landclass_id, in vec4 dFdx_and_dFdy); // Look up the landclass id [0 .. 255] for this particular fragment. // Lookup id of any neighbouring landclass that is within the search distance. // Searches are performed in upto 4 directions right now, but only one landclass is looked up // Create a mix factor weighting the influences of nearby landclasses void get_landclass_id(in vec2 tile_coord, in vec4 dFdx_and_dFdy, out int landclass_id, out ivec4 neighbor_landclass_ids, out int num_unique_neighbors,out vec4 mix_factor ); // Look up the texel of the specified texture type (e.g. grain or detail textures) for this fragment // and any neighbor texels, then mix. vec4 get_mixed_texel(in int texture_type, in vec2 g_texture_coord, in int landclass_id, in int num_unique_neighbors, in ivec4 neighbor_texel_landclass_ids, in vec4 neighbor_mix_factors, in vec4 dFdx_and_dFdy ); // Determine the texel and material parameters for a particular fragment, // Taking into account photoscenery etc. void get_material(in int landclass, in vec2 ground_tex_coord, in vec4 dxdy_gc, out float mat_shininess, out vec4 mat_ambient, out vec4 mat_diffuse, out vec4 mat_specular, out vec4 dxdy, out vec2 st ); // Apply the ALS haze model to a specific fragment vec4 applyHaze(inout vec4 fragColor, inout vec3 hazeColor, in vec3 secondary_light, in float ct, in float hazeLayerAltitude, in float visibility, in float avisibility, in float dist, in float lightArg, in float mie_angle); // Procedurally generate a water texel for this fragment vec4 generateWaterTexel(); void main() { yprime_alt = light_diffuse_comp.a; //diffuse_term.a = 1.0; mie_angle = gl_Color.a; float effective_scattering = min(scattering, cloud_self_shading); // distance to fragment float dist = length(relPos); // angle of view vector with horizon float ct = dot(vec3(0.0, 0.0, 1.0), relPos)/dist; // Altitude of fragment above sea level float msl_altitude = (relPos.z + eye_alt); vec3 shadedFogColor = vec3(0.55, 0.67, 0.88); // this is taken from default.frag vec3 n; float NdotL, NdotHV, fogFactor; vec3 lightDir = gl_LightSource[0].position.xyz; vec3 halfVector = gl_LightSource[0].halfVector.xyz; //vec3 halfVector = normalize(normalize(lightDir) + normalize(ecViewdir)); vec4 texel; vec4 snow_texel; vec4 detail_texel; vec4 mix_texel; vec4 fragColor; vec4 specular = vec4(0.0); float intensity; // Material/texel properties float mat_shininess; vec2 st; vec4 mat_ambient, mat_diffuse, mat_specular, dxdy; // get noise at different wavelengths // used: 5m, 5m gradient, 10m, 10m gradient: heightmap of the closeup terrain, 10m also snow // 50m: detail texel // 250m: detail texel // 500m: distortion and overlay // 1500m: overlay, detail, dust, fog // 2000m: overlay, detail, snow, fog float noise_10m; float noise_5m; noise_10m = Noise2D(rawPos.xy, 10.0); noise_5m = Noise2D(rawPos.xy ,5.0); float noisegrad_10m; float noisegrad_5m; float noise_50m = Noise2D(rawPos.xy, 50.0);; float noise_250m = Noise3D(worldPos.xyz,250.0); float noise_500m = Noise3D(worldPos.xyz, 500.0); float noise_1500m = Noise3D(worldPos.xyz, 1500.0); float noise_2000m = Noise3D(worldPos.xyz, 2000.0); // // get the texels // Oct 27 2021: // Geometry is in the form of roughly rectangular 'tiles' // with a mesh forming a grid with regular spacing. // Each vertex in the mesh is given an elevation // Tile dimensions in m // Testing: created from two float uniforms in global scope. Should be sent as a vec2 // vec2 tile_size // Tile texture coordinates range [0..1] over the tile 'rectangle' vec2 tile_coord = gl_TexCoord[0].st; // Test phase: Constants and toggles for transitions between landlcasses are defined at // the top of this file. // Look up the landclass id [0 .. 255] for this particular fragment // and any neighbouring landclass that is close. // Each tile has 1 texture containing landclass ids stetched over it. // Landclass for current fragment, and up-to 4 neighboring landclasses - 2 used currently int lc; ivec4 lc_n; int num_unique_neighbors = 0; // Mix factor of base textures for 2 neighbour landclass(es) vec4 mfact; bool water = false; // Partial derivatives of s and t of ground texture coords for this fragment, // with respect to window (screen space) x and y axes. // Used to pick mipmap LoD levels, and turn off unneeded procedural detail // dFdx and dFdy are packed in a vec4 so multiplying everything // to scale takes 1 instruction slot. vec4 dxdy_gc = vec4(dFdx(ground_tex_coord) , dFdy(ground_tex_coord)); get_landclass_id(tile_coord, dxdy_gc, lc, lc_n, num_unique_neighbors, mfact); get_material(lc, ground_tex_coord, dxdy_gc, mat_shininess, mat_ambient, mat_diffuse, mat_specular, dxdy, st); if (fg_photoScenery) { texel = texture(landclass, vec2(gl_TexCoord[0].s, 1.0 - gl_TexCoord[0].t)); water = (texture(coastline, vec2(tile_coord.s, tile_coord.t)).r > 0.1); } else { // Lookup the base texture texel for this fragment and any neighbors, with mixing texel = get_mixed_texel(0, ground_tex_coord, lc, num_unique_neighbors, lc_n, mfact, dxdy_gc); water = texture(landclass, vec2(tile_coord.s, tile_coord.t)).z > 0.9; } if ((water_shader == 1) && water) { // This is a water fragment, so calculate the fragment color procedurally fragColor = generateWaterTexel(); fragColor.rgb += getClusteredLightsContribution(eyePos.xyz, n, fragColor.rgb); } else { // Photoscenery or land fragment, so determine the shading and color normally vec4 color = gl_Color * mat_ambient; color.a = 1.0; // Testing code: mix with green to show values of variables at each point //vec4 green = vec4(0.0, 0.5, 0.0, 0.0); //texel = mix(texel, green, (mfact[2])); //mix_texel = texel; //detail_texel = texel; vec4 t = texel; int flag = 1; int mix_flag = 1; float local_autumn_factor = texel.a; if (fg_photoScenery) { flag = 0; mix_flag = 0; } float distortion_factor = 1.0; vec2 stprime; float noise_term; float snow_alpha; //float view_angle = abs(dot(normal, normalize(ecViewdir))); if ((quality_level > 3)&&(msl_altitude +500.0 > snowlevel)) { float sfactor; snow_texel = vec4 (0.95, 0.95, 0.95, 1.0) * (0.9 + 0.1* noise_500m + 0.1* (1.0 - noise_10m) ); snow_texel.r = snow_texel.r * (0.9 + 0.05 * (noise_10m + noise_5m)); snow_texel.g = snow_texel.g * (0.9 + 0.05 * (noise_10m + noise_5m)); snow_texel.a = 1.0; noise_term = 0.1 * (noise_500m-0.5); sfactor = sqrt(2.0 * (1.0-steepness)/0.03) + abs(ct)/0.15; noise_term = noise_term + 0.2 * (noise_50m -0.5) * (1.0 - smoothstep(18000.0*sfactor, 40000.0*sfactor, dist) ) ; noise_term = noise_term + 0.3 * (noise_10m -0.5) * (1.0 - smoothstep(4000.0 * sfactor, 8000.0 * sfactor, dist) ) ; if (dist < 3000.0*sfactor) { noise_term = noise_term + 0.3 * (noise_5m -0.5) * (1.0 - smoothstep(1000.0 * sfactor, 3000.0 *sfactor, dist) ); } snow_texel.a = snow_texel.a * 0.2+0.8* smoothstep(0.2,0.8, 0.3 +noise_term + snow_thickness_factor +0.0001*(msl_altitude -snowlevel) ); } if ((tquality_level > 2) && (mix_flag == 1)) { // Mix texture is material texture 15, which is mapped to the b channel of fg_textureLookup1 //int tex2 = int(fg_textureLookup1[lc].b * 255.0 + 0.5); //mix_texel = texture(textureArray, vec3(gl_TexCoord[0].st * 1.3, tex2)); if (mix_texel.a < 0.1) { mix_flag = 0;} //WS2: mix_texel = texture2D(mix_texture, gl_TexCoord[0].st * 1.3); // temp mix_texel = lookup_ground_texture_array(4, st * 1.3, lc, dxdy * 1.3); if (mix_texel.a <0.1) {mix_flag = 0;} } if (tquality_level > 3 && (flag == 1)) { stprime = vec2 (0.86*gl_TexCoord[0].s + 0.5*gl_TexCoord[0].t, 0.5*gl_TexCoord[0].s - 0.86*gl_TexCoord[0].t); //distortion_factor = 0.9375 + (1.0 * nvL[2]); distortion_factor = 0.97 + 0.06 * noise_500m; stprime = stprime * distortion_factor * 15.0; if (quality_level > 4) { stprime = stprime + normalize(relPos).xy * 0.02 * (noise_10m + 0.5 * noise_5m - 0.75); } // Detail texture is material texture 11, which is mapped to the g channel of fg_textureLookup1 //int tex3 = int(fg_textureLookup1[lc].g * 255.0 + 0.5); //detail_texel = texture(textureArray, vec3(stprime, tex3)); if (detail_texel.a < 0.1) { flag = 0;} //WS2: detail_texel = texture2D(detail_texture, stprime); // temp vec4 dxdy_prime = vec4(dFdx(stprime), dFdy(stprime)); detail_texel = lookup_ground_texture_array(5, stprime, lc, dxdy_prime); } // texture preparation according to detail level // mix in hires texture patches float dist_fact; float nSum; float mix_factor; float transition_model = fg_materialParams1[lc].r; float hires_overlay_bias = fg_materialParams1[lc].g; if (tquality_level > 2) { // first the second texture overlay // transition model 0: random patch overlay without any gradient information // transition model 1: only gradient-driven transitions, no randomness if (mix_flag == 1) { // Random patch overlay weighting with noise nSum = 0.18 * (2.0 * noise_2000m + 2.0 * noise_1500m + noise_500m); // Increase the weighting for the mix_texel if more gradient-driven. nSum = mix(nSum, 0.5, max(0.0, 2.0 * (transition_model - 0.5))); // Add the gradient element nSum = nSum + 0.4 * (1.0 -smoothstep(0.9,0.95, abs(steepness)+ 0.05 * (noise_50m - 0.5))) * min(1.0, 2.0 * transition_model); mix_factor = smoothstep(0.5, 0.54, nSum); texel = mix(texel, mix_texel, mix_factor); local_autumn_factor = texel.a; } } if (tquality_level > 3) { // then the detail texture overlay if (dist < 40000.0) { if (flag == 1) { //noise_50m = Noise2D(rawPos.xy, 50.0); //noise_250m = Noise2D(rawPos.xy, 250.0); dist_fact = 0.1 * smoothstep(15000.0,40000.0, dist) - 0.03 * (1.0 - smoothstep(500.0,5000.0, dist)); nSum = ((1.0 -noise_2000m) + noise_1500m + 2.0 * noise_250m +noise_50m)/5.0; nSum = nSum - 0.08 * (1.0 -smoothstep(0.9,0.95, abs(steepness))); mix_factor = smoothstep(0.47, 0.54, nSum +hires_overlay_bias - dist_fact); if (mix_factor > 0.8) {mix_factor = 0.8;} texel = mix(texel, detail_texel,mix_factor); local_autumn_factor = texel.a; } } } // autumn colors float autumn_factor = season * 2.0 * (1.0 - local_autumn_factor) ; texel.r = min(1.0, (1.0 + 2.5 * autumn_factor) * texel.r); texel.g = texel.g; texel.b = max(0.0, (1.0 - 4.0 * autumn_factor) * texel.b); if (local_autumn_factor < 1.0) { intensity = length(texel.rgb) * (1.0 - 0.5 * smoothstep(1.1,2.0,season)); texel.rgb = intensity * normalize(mix(texel.rgb, vec3(0.23,0.17,0.08), smoothstep(1.1,2.0, season))); } const vec4 dust_color = vec4 (0.76, 0.71, 0.56, 1.0); const vec4 lichen_color = vec4 (0.17, 0.20, 0.06, 1.0);; //float snow_alpha; if (quality_level > 3) { // mix vegetation texel = mix(texel, lichen_color, 0.4 * lichen_cover_factor + 0.8 * lichen_cover_factor * 0.5 * (noise_10m + (1.0 - noise_5m)) ); // mix dust texel = mix(texel, dust_color, clamp(0.5 * dust_cover_factor + 3.0 * dust_cover_factor * (((noise_1500m - 0.5) * 0.125)+0.125 ),0.0, 1.0) ); // mix snow if (msl_altitude +500.0 > snowlevel) { snow_alpha = smoothstep(0.75, 0.85, abs(steepness)); //texel = mix(texel, snow_texel, texel_snow_fraction); texel = mix(texel, snow_texel, snow_texel.a* smoothstep(snowlevel, snowlevel+200.0, snow_alpha * (msl_altitude)+ (noise_2000m + 0.1 * noise_10m -0.55) *400.0)); } } else if (msl_altitude +500.0 > snowlevel) { float snow_alpha = 0.5+0.5* smoothstep(0.2,0.8, 0.3 + snow_thickness_factor +0.0001*(msl_altitude -snowlevel) ); // texel = vec4(dot(vec3(0.2989, 0.5870, 0.1140), texel.rgb)); texel = mix(texel, vec4(1.0), snow_alpha* smoothstep(snowlevel, snowlevel+200.0, (msl_altitude))); } // get distribution of water when terrain is wet float water_threshold1; float water_threshold2; float water_factor =0.0; if ((dist < 5000.0)&& (quality_level > 3) && (wetness>0.0)) { water_threshold1 = 1.0-0.5* wetness; water_threshold2 = 1.0 - 0.3 * wetness; water_factor = smoothstep(water_threshold1, water_threshold2 , (0.3 * (2.0 * (1.0-noise_10m) + (1.0 -noise_5m)) * (1.0 - smoothstep(2000.0, 5000.0, dist))) - 5.0 * (1.0 -steepness)); } // darken wet terrain texel.rgb = texel.rgb * (1.0 - 0.6 * wetness); // light computations vec4 light_specular = gl_LightSource[0].specular; // If gl_Color.a == 0, this is a back-facing polygon and the // normal should be reversed. //n = (2.0 * gl_Color.a - 1.0) * normal; n = normal;//vec3 (nvec.x, nvec.y, sqrt(1.0 -pow(nvec.x,2.0) - pow(nvec.y,2.0) )); n = normalize(n); NdotL = dot(n, lightDir); if ((tquality_level > 3) && (mix_flag ==1)&& (dist < 2000.0) && (quality_level > 4)) { noisegrad_10m = (noise_10m - Noise2D(rawPos.xy+ 0.05 * normalize(lightDir.xy),10.0))/0.05; noisegrad_5m = (noise_5m - Noise2D(rawPos.xy+ 0.05 * normalize(lightDir.xy),5.0))/0.05; NdotL = NdotL + 1.0 * (noisegrad_10m + 0.5* noisegrad_5m) * mix_factor/0.8 * (1.0 - smoothstep(1000.0, 2000.0, dist)); } if (NdotL > 0.0) { float shadowmap = getShadowing(); vec4 diffuse_term = light_diffuse_comp * mat_diffuse; color += diffuse_term * NdotL * shadowmap; NdotHV = max(dot(n, halfVector), 0.0); if (mat_shininess > 0.0) specular.rgb = (mat_specular.rgb * light_specular.rgb * pow(NdotHV, mat_shininess) * shadowmap); } color.a = 1.0;//diffuse_term.a; // This shouldn't be necessary, but our lighting becomes very // saturated. Clamping the color before modulating by the texture // is closer to what the OpenGL fixed function pipeline does. color = clamp(color, 0.0, 1.0); fragColor = color * texel + specular; fragColor.rgb += getClusteredLightsContribution(eyePos.xyz, n, texel.rgb); } float lightArg = (terminator-yprime_alt)/100000.0; vec3 hazeColor = get_hazeColor(lightArg); gl_FragColor = applyHaze(fragColor, hazeColor, vec3(0.0), ct, hazeLayerAltitude, visibility, avisibility, dist, lightArg, mie_angle); // Testing phase controls: if (remove_haze_and_lighting == 1) { gl_FragColor = texel; } }