Although this doesn't work anywhere but on my machine ... OK/Cancel
is completely out of place for this dialog. This has to be Apply/Close
or something.
Changes made 19/12/2004
Panel re-oriented
3d Compass shows through windows.
Wing-tips slightly altered.
Changes made 18/12/2004
Prop spinner shortened and widened
Nose area slightly remodelled to fit silouette
Nose texture altered to place lower intake correctly
Nose wheel reduced in size.
Nose leg Oleo guide added (does not rotate - is this correct with real ac?)
Nose wheel Axle added.
Nose wheel fixed to rotate about it's shaft axis.
Windscreen / panel mesh changed so that panel no longer protrudes thru dash
Panel instruments moved to represent the geometries of the real cockpit.
Pilot / Copilot Yokes moved inboard to represent the geometries of the real cockpit.
Alpha layer added to interior texture to prevent panel showing through seats / yokes.
Interior texture duplicated and mapped to panel only to allow panel to show.
Front seats moved slightly inboard.
Landing light pair added to port wing texture.
Alpah layer added to wing texture to prevent panel showing through.
Texture remapped to Flaps (no shows ribs again).
Wing strut outer joins brought inboard to point of wing taper to match real aircraft geometries.
Wing struts thinned in front profile and thickened in side profile.
VHF aerials moved aft to their usual position.
Maingear legs altered so they now join with the fusealage (previously, 20cm gap)
Rear window altered slightly to match silouette.
Rear (white) Navigation Light made to translate with the rudder.
Not yet done: independant landing and taxi lights on port wing
There are two <dme> entries in preferences.xml, resulting in two dme branches
under /instrumentation/ (dme[0] and dme[1]). The serviceable property is only
set for the second entry (dme[1]), and that one is not connected to the dme
module. Solution: Remove the first <dme> entry, and set the index explicitly
to 0 for the remaining <dme> entry.
I've finished the emigration of the radiostack, and I've also removed it
completely. It turned out that the comm radio is completely implemented in
the ATC subsystem. I've changed the affected ATC files to point
to /instrumentation/com, but I guess that the maintainer of the ATC code
should decide wether to make it configureable, and how.
I also had to change some files in Network and Main. The changes in network
should be obvious, but the changes in Main were a bit suspect. The files
included radiostack.hxx, but they weren't directly depending on
radiostack-hxx. They were depending on other files that were included by
radiostack.hxx. I got it to compile, but I'm not sure if I included the
correct directly depending file.
For the data directory I changed every occurrence of /radios/
with /instrumentation/ with this simple one-liner that I found on the net:
find -name '*.xml' -type f | xargs perl -pi -e
's/\/radios\//\/instrumentation\//g'
Instead of me sending all the files that got changed by this I suggest that
you execute the one-liner yourself. Of course I can not guarantee that this
will work perfectly, but I considered hand editing to be not an option (I'm
lazy). I don't want to test every aircraft to see if everything still works,
I think it's better to wait and see if anyone complaints about broken nav
radios/instruments.
These files add a functioning Fresnel Lens Optical Landing System (FLOLS).
The orange/red 'source' lights are illuminated according to the position of
the pilot's eye above/below the 3.5 deg glide slope. The apparent position
of the source light relative to the fixed green datum lights allow the pilot
to 'fly the meatball'. The green 'cut' lights flash when the pilot's eye is
below the coverage of the lowest (red) source light.
TODO - add rules for the operation of the wave-off lights.
the data/Huds/Default/default.xml file if we don't want to draw the runway
in the default HUD (but then we should take a close look at all the elements
in the default HUD if we go down that road.)
I have now the FDM side of an aircraft carrier set up.
The implementation uses a local cache of the scene graph to do intersection
tests. This can then be done per gear/hook/lauchbar.
Also the required aircraft carrier hardware will show up in this cache and can
provide the required information.
The cache itself is ATM integrated into the FGInterface class.
New are functions to query a ground contact point below a given location in
the earth. Together with that contact point the surface normal and the
velocity of that contact surface are returned. The locations, normals and
velovities are cartesian vectors given in the wgs84 coordinate system (origin
in the earths center, x axis towards lat=lon=0, y axis towards lat=0, lon=90,
z axis towards the north pole).
A function to test catching a wire. The test is done by intersection of the
quad where the hook moved during the past timestep with the lines
representing the wires. When this test was sucessfull, we can query for the
locations/velocities of the wires mount points. When the wire is no longer
needed it should be released.
Catapults are also stored as special lines in the scenegraph. There is a
function which returns the nearest catapult line and its current
locations/velocities.
To build up the cache you need to call a function to let the cache know where
and how big the cache must be.
I have also a preliminary implementation to make use of that stuff from within
JSBSim together with an aircraft which I have used for development.
To play with that, you have to install the patches/new files described above.
The hook can be extended with the H key, retracted with h. Start flightgear
with
fgfs --lat=37.688 --lon=-122.683 --heading=180 --altitude=71
and you will be placed on the carriers deck rolling backwards wrt the carrier.
Then apply the breaks and wait until the aircraft settled down past being not
trimmed. Now taxi on the deck to one of the catapults. When the nose wheel is
above the first few meters of the catapult (please taxi exactly there). Apply
the breaks and leave them applied. lower the flaps to half and give full
throttle. Pull a little at your stick and release the breaks. As the breaks
are released the aircraft is launched.
Then you can cruise a bit, and again try to land on the nimitz. When you land,
do not forget to extend the hook with 'H'.
If you like it, you can then taxi to the catapult ... :)
The physical model is not yet ready, but the api between the FDM and
flightgear has prooven to be sufficient for that task.
This file is in a rather bad state. Hence:
- remove doubled "rudder" settings
- fix & nasalify brake properties (/controls/gear/wheel[?]/brake, yet again)
- remove redundant index setting
- nasalify throttle (to allow more than 8 engines)
- nasalify flaps (to make flaps with more than 4 positions work)
- nasalify elevator trim (just for fun :-)
- fix syntax
- remove lots of trailing spaces
File tested by Jon-Eirik Pettersen
I attach the latest version of Nimitz. The textures have been improved. A glide-path has been added, it is on by default, but can be switched off by means of the properties browser: /ai/models/ship/controls/glide-path. The origin has been adjusted to the turning pivot and approximate roll center.
Modified AiShip files are also attached. These allow the radius of the turning circle of a ship to be input. The turning circle is adjusted for speed and rudder angle. Roll has been corrected so that a ship leans out of a turn, not inwards like an aircraft. The roll angle is adjusted for speed and rudder angle (yes, application of more rudder reduces roll angle - rudders act as stabilizers).
TODO
Add a relative wind calculation so that a carrier can be turned to the appropriate launch and recovery courses.
Add a 'flight plan' so that the carrier can carry out a racetrack for flight ops.
Add a projector landing sight.
Add auto-land facilities.
