mfranz
5de5a3bf0c
Oliver SCHROEDER: "config for the Saitek Pro Flight Yoke"
2008-09-30 20:45:02 +00:00
mfranz
3ab061089f
Ron JENSEN: yet another <name> (mf: reordering a bit)
2008-08-02 17:43:19 +00:00
mfranz
fd983fd62c
Ron JENSEN: config for 'Saitek Saitek Pro Flight Quadrant'
...
Axis Left to Right: Throttle, Prop Pitch, Mixture
Buttons Left to Right: Flaps, Trim, Gear (up is up, down is down)
2008-06-01 06:42:05 +00:00
mfranz
fe5c2ebb65
Lauri "zan" PELTONEN: add "Saitek Cyborg Evo Force"
2008-04-23 20:54:14 +00:00
mfranz
eafdb11f0e
Anders GIDENSTAM:
...
"Added push-to-talk, multiengine throttle modes and axis assignments for Windows."
2008-03-18 20:00:07 +00:00
mfranz
359322e585
s/linux/unix/
2008-02-28 21:00:27 +00:00
tat
3850ca7b76
Fixed: axis 3 was assigned for rudder on Mac - should be 2
2008-02-28 14:57:40 +00:00
mfranz
74678d856d
Sven ALMGREN:
...
"Saitek Pro-Flight-Rudder-Pedals's name differs in windows from linux,
and the axis for the rudder is 3, not 2... assumes Mac uses same channel
as windows, but could be wrong... linux is set to channel 2, and windows
and mac is set to 3"
2008-02-27 17:58:38 +00:00
mfranz
f0cd9efc9f
Hans FUGAL: different axis numbers for mac/unix
...
mf: add windows entries with same numbers as mac for now
2007-12-13 18:30:55 +00:00
mfranz
92fdbe3f1b
Arvid NORLANDER: trigger, aircraft specific stuff, cleanup, ...
2007-12-12 21:52:56 +00:00
mfranz
f2a14b1697
Arvid NORLANDER: Saitek X52 pro driver
2007-12-04 12:36:51 +00:00
mfranz
93b06dc514
F3+F4+{left,right} -> switch to previous/next view (ignoring the "enabled" flag)
2007-11-20 16:22:36 +00:00
mfranz
c50aa8d817
better check for "lookat", as the C++ part does this, too. (And one could
...
also write "Blutwurst" instead of "lookfrom", with the same effect.)
2007-10-09 20:44:41 +00:00
mfranz
7ec82ab621
deduce left/right view dir from /sim/view[n]/type=="lookfrom"
...
(invert for all "lookat" views, so that in outside view "left" means:
move viewer to the left, not the target)
2007-10-09 20:11:08 +00:00
mfranz
f1374e316c
Wim van HOYDONCK: add support for Saitek Cyborg evo Wireless
2007-09-28 10:04:29 +00:00
vmmeazza
52547b817a
Anders Gidenstam -
...
Joystick configuration for the Saitek AV8R
2007-08-27 17:34:54 +00:00
mfranz
eab53706ba
- replace "view-cycle" fgcommand by view.stepView() wrapper
...
(This fgcommand was broken for a few weeks. Now it's fixed, but the
wrapper use is desirable, as this allows easy redefining.)
- cyborg gold: cosmetics
2007-06-11 19:23:15 +00:00
mfranz
b7ec28dcfa
Harald JOHNSEN: add name "Saitek X52 Flight Controller"
2007-05-31 15:45:26 +00:00
mfranz
1e23cd6efc
Anders GIDENSTAM: update
2007-03-20 17:05:23 +00:00
mfranz
caea872fbe
Anders GIDENSTAM: X36 gamport js driver
2007-03-19 21:06:17 +00:00
mfranz
4a03f25bb6
- replace ["OFF", "ON"][i] with faster ternary operators (which didn't
...
exist when this was written)
- cosmetics
2007-02-18 18:33:11 +00:00
mfranz
ef78365c1c
Ed SIRETT: configuration for Saitek P880
...
Ron JENSEN: replaced direct property use with Nasal wrapper calls
2007-02-12 18:51:48 +00:00
mfranz
9fd4bd2aa8
fix <power> type here, too :-)
2007-01-17 12:45:32 +00:00
mfranz
083ecf0786
fix <power> type
2007-01-17 12:42:13 +00:00
mfranz
e9cfd04488
Dave PERRY: Pro-Flight-Rudder-Pedals.xml config
2007-01-16 00:45:56 +00:00
mfranz
0d672a084b
fix gear handling
2007-01-15 22:25:17 +00:00
mfranz
9352c3ae4f
more consistent capitalization
2006-10-21 13:51:42 +00:00
mfranz
018f89b932
improve descriptions, add button names
...
(if <name> isn't defined, "Axis #0 ", or "Btn #2 " etc. are used in the
joystick info dialog; <name>s should at least be used for entries with
OS specific indices)
2006-10-21 10:21:45 +00:00
mfranz
f5544f0cb9
turn <power> off for cyclic control on helicopters, that is: when a
...
property /rotors is available at joystick driver laod time. Note that
the FDM creates /rotors *afterwards*, so it needs to be defined in the
*-set.xml file already (which is the case for all helicopters in CVS).
A simple, self-ending <rotors/> tag should do.
2006-10-12 13:55:15 +00:00
mfranz
5d2316442b
- use cmdarg().getParent() to access own property root
...
- use kbd-ctrl combinations for weapon control (at least one js in cvs
should demonstrate that :-)
2006-06-24 18:18:01 +00:00
mfranz
50e2803aa8
Alexander Babichev, modified from Andy's X45.xml
2006-06-17 16:07:08 +00:00
mfranz
308cc9fcf5
additional name
2006-06-12 05:45:34 +00:00
mfranz
f4a7766013
remove garbage
2006-03-09 22:32:04 +00:00
mfranz
5672fdd382
- replace resetFOV() with view.resetFOV()
...
- make F1/F2 repeatable again, just don't repeat brake commands
2006-03-02 17:05:45 +00:00
mfranz
29906cdc0b
brake bindings aren't repeatable
2006-03-01 18:55:48 +00:00
mfranz
ca9feebd38
- use brake wrappers
...
- use Vasilii method to reset FOV (F4+F1+F2)
2006-03-01 18:42:37 +00:00
mfranz
f51cbe102b
- convert most joysticks to use brake wrappers (only js with sophisticated
...
settings are left unchanged for now)
- set throttle wrapper in one config
2006-03-01 18:17:26 +00:00
curt
c92c733e93
Oops, try again.
2006-01-04 22:17:30 +00:00
curt
22118858b4
Reverse axes 4&5 for windows.
2006-01-04 22:16:51 +00:00
mfranz
ebf9d23f54
Curtis R Anderson: another <name>
2005-11-24 07:54:36 +00:00
curt
f90fb056d1
Match version with source.
2005-11-06 02:41:27 +00:00
curt
55ae4801f7
Curt Olson:
...
Initial revision. This is the only joystick that the Walmart next to my
house is selling. (What are you going to do?) Buttons 2 and 4 are still
unmapped awaiting any good suggestions.
2005-09-09 01:43:07 +00:00
ehofman
02021216c2
Update to recognize the 'Saitek Cyborg Evo'
2005-08-22 17:55:40 +00:00
mfranz
d9cb887375
Juergen Tretthahn: s/stepFlaps/flapsDown/
2005-07-01 05:20:24 +00:00
mfranz
17166921c0
- rename controls.stepFlaps() to controls.flapsDown(), because:
...
- to support "old-style" gear/flap control (operation as long as button
pressed/lever pushed -> b29/hurricane), let bindings not only report
up/down, but up (-1), stop (0), down (1).
- let controls.flapsDown() ignore "stop" so as to remain compatible with
prior behavior
- adapt all joysticks/aircraft (sigh)
- some minor cosmetics in joystick configs, such as indentation fixes
2005-06-22 13:08:01 +00:00
mfranz
a943e01c6d
Jim Campbell: another name; fixed <mac> axes
2005-06-20 17:12:16 +00:00
mfranz
6654497a78
cosmetics (only to annoy everybode)
2005-06-19 18:25:57 +00:00
mfranz
bc51a3df26
- exploit the nasal namespace feature, which simplifies matters a lot and
...
avoids the obscure and ugly "which" workaround
Note that the input subsystem sets variable "this" to this joystick's
base property path; This is useful to be able to access the driver's own
information from the property tree. Example:
data = props.globals.getNode(this).getNode("data");
where "this" contains string "/input[0]/joysticks[0]/js[0]" if the js is
the first in the system
2005-06-19 17:29:56 +00:00
mfranz
8a2ba09c4a
call controls.stepFlaps() wrapper to keep bindings functional with aircraft
...
that implement special flaps behavior; use controls.throttleAxis() where
safely possible to support arbitrary numbers of engines
2005-06-16 16:47:31 +00:00
mfranz
f4a90a615e
add controls.gearToggle() convenience function; adapt all joystick files
...
to new controls function
2005-06-16 07:59:33 +00:00