diff --git a/Aircraft-yasim/a10-yasim.xml b/Aircraft-yasim/a10-yasim.xml
new file mode 100755
index 000000000..1fb071f54
--- /dev/null
+++ b/Aircraft-yasim/a10-yasim.xml
@@ -0,0 +1,146 @@
+<!--  A10 yasim config.  This is a hack and not an authentic
+      representation of the aircraft.  Having said that, the
+      numbers, where I could find them, roughly match those of
+      the original aircraft.
+      Lee Elliott. leee-fgfs@spatial.freeserve.co.uk
+-->
+
+<airplane mass="37700">
+
+<!-- Approach configuration -->
+<approach speed="110" aoa="7">
+  <control-setting axis="/controls/engines/engine[0]/throttle" value="0.5"/>
+  <control-setting axis="/controls/engines/engine[1]/throttle" value="0.5"/>
+  <control-setting axis="/controls/flight/flaps" value="1.0"/>
+  <control-setting axis="/controls/gear/gear-down" value="1"/>
+</approach>
+
+<!-- Cruise configuration -->
+<cruise speed="380" alt="0">
+  <control-setting axis="/controls/engines/engine[0]/throttle" value="1.0"/>
+  <control-setting axis="/controls/engines/engine[1]/throttle" value="1.0"/>
+  <control-setting axis="/controls/flight/flaps" value="0.0"/>
+  <control-setting axis="/controls/gear/gear-down" value="0"/>
+</cruise>
+
+<cockpit x="-3.5" y="0.0" z="1.2"/>
+
+<fuselage ax="0" ay="0" az="0" bx="-16.26" by="0" bz="0"
+          width="1.4"/>
+
+<!-- Left Engine -->
+<fuselage ax="-10" ay="1.50" az="1" bx="-13.5" by="1.50" bz="0.8"
+          width="1.5"/>
+
+<!-- Right Engine -->
+<fuselage ax="-10" ay="-1.50" az="1" bx="-13.5" by="-1.50" bz="0.8"
+          width="1.5"/>
+
+<wing x="-8.8" y="0.5" z="-0.5" taper="0.6" incidence="-1"
+      length="8.3" chord="3.1" sweep="0.0" dihedral="3.0" camber="0">
+  <stall aoa="14" width="6" peak="1.3"/>
+  <flap0 start="0.04" end="0.51" lift="1.5" drag="1.2"/>
+  <flap1 start="0.54" end="0.86" lift="1.3" drag="1.2"/>
+  <spoiler start="0.54" end="0.86" lift="0.1" drag="20.0"/>
+
+  <control-input axis="/controls/flight/flaps" control="FLAP0"/>
+  <control-input axis="/controls/flight/aileron" control="FLAP1" split="true"/>
+  <control-input axis="/controls/flight/aileron-trim" control="FLAP1" split="true"/>
+  <control-input axis="/controls/flight/spoilers" control="SPOILER"/>
+
+  <control-output control="FLAP0" side="left"
+      prop="/surface-positions/left-flap-pos-norm"/>
+  <control-output control="FLAP0" side="right"
+      prop="/surface-positions/right-flap-pos-norm"/>
+  <control-output control="FLAP1" side="left"
+      prop="/surface-positions/left-aileron-pos-norm"/>
+  <control-output control="FLAP1" side="right"
+      prop="/surface-positions/right-aileron-pos-norm"/>
+  <control-output control="SPOILER" side="left"
+      prop="/surface-positions/left-spoiler-pos-norm"/>
+  <control-output control="SPOILER" side="right"
+      prop="/surface-positions/right-spoiler-pos-norm"/>
+
+  <control-speed control="FLAP0" transition-time="5"/>
+  <control-speed control="SPOILER" transition-time="0.5"/>
+
+</wing>
+
+<hstab x="-15.5" y="0.4" z="0.4" taper="0.0" effectiveness="3"
+       length="2.5" chord="2" sweep="0.0" dihedral="0.0" camber="0">
+  <stall aoa="20" width="5" peak="1.5"/>
+  <flap0 start="0" end="1" lift="1.5" drag="1.2"/>
+  <control-input axis="/controls/flight/elevator" control="FLAP0"/>
+  <control-input axis="/controls/flight/elevator-trim" control="FLAP0"/>
+  <control-output control="FLAP0" prop="/surface-positions/elevator-pos-norm"/>
+</hstab>
+
+<vstab x="-15.0" y="2.5" z="-0.9" taper="0.7" effectiveness="2"
+       length="2.8" chord="2.0" sweep="0.0">
+  <stall aoa="16" width="5" peak="1.5"/>
+  <flap0 start="0" end="1" lift="1.3" drag="1.3"/>
+  <control-input axis="/controls/flight/rudder" control="FLAP0" invert="true"/>
+  <control-output control="FLAP0" prop="/surface-positions/rudder-pos-norm"/>
+</vstab>
+
+<vstab x="-15.0" y="-2.5" z="-0.9" taper="0.7" effectiveness="2"
+       length="2.8" chord="2.0" sweep="0.0">
+  <stall aoa="16" width="5" peak="1.5"/>
+  <flap0 start="0" end="1" lift="1.3" drag="1.3"/>
+  <control-input axis="/controls/flight/rudder" control="FLAP0" invert="true"/>
+  <control-output control="FLAP0" prop="/surface-positions/rudder-pos-norm"/>
+</vstab>
+
+<!-- Engines and tanks -->
+<jet x="-11.8" y="-1.5" z="1.0" mass="1000" thrust="9065">
+  <control-input axis="/controls/engines/engine[0]/throttle" control="THROTTLE"/>
+</jet>
+
+<jet x="-11.8" y="1.5" z="1.0" mass="1000" thrust="9065">
+  <control-input axis="/controls/engines/engine[1]/throttle" control="THROTTLE"/>
+</jet>
+
+<tank x="-8.5" y="-1.5" z="0.0" jet="true" capacity="2000"/>
+<tank x="-8.5" y="1.5" z="0.0" jet="true" capacity="2000"/>
+<tank x="-8.5" y="0" z="0.0" jet="true" capacity="6700"/>
+
+<!-- Undercarriage -->
+<!-- nose -->
+<gear x="-2.9" y="0.4" z="-2.8" retract-time="7" compression="0.7">
+  <control-input axis="/controls/flight/rudder" control="STEER" square="true"/>
+  <control-input axis="/controls/gear/gear-down" control="EXTEND"/>
+  <control-speed control="EXTEND" transition-time="7"/>
+  <control-output control="EXTEND" prop="/gear/gear/position-norm"/>
+</gear>
+
+<!-- left main -->
+<gear x="-9.0" y="2.5" z="-2.8" retract-time="7" compression="0.6">
+  <control-input axis="/controls/gear/wheel[1]/brake" control="BRAKE"/>
+  <control-input axis="/controls/gear/parking-brake" control="BRAKE"/>
+  <control-input axis="/controls/gear/gear-down" control="EXTEND"/>
+  <control-speed control="EXTEND" transition-time="7"/>
+  <control-output control="EXTEND" prop="/gear/gear[1]/position-norm"/>
+</gear>
+
+<!-- right main -->
+<gear x="-9.0" y="-2.5" z="-2.8" retract-time="7" compression="0.6">
+  <control-input axis="/controls/gear/wheel[2]/brake" control="BRAKE"/>
+  <control-input axis="/controls/gear/parking-brake" control="BRAKE"/>
+  <control-input axis="/controls/gear/gear-down" control="EXTEND"/>
+  <control-speed control="EXTEND" transition-time="7"/>
+  <control-output control="EXTEND" prop="/gear/gear[2]/position-norm"/>
+</gear>
+
+<!-- Canopy -->
+<gear x="-2.6" y="0.0" z="1.4" retract-time="7" compression="0.6">
+  <control-input axis="/controls/gear/parking-brake" control="EXTEND"/>
+  <control-speed control="EXTEND" transition-time="5"/>
+  <control-output control="EXTEND" prop="/canopy/position-norm"/>
+</gear>
+
+<!-- Ballast -->
+<ballast x="-3.5" y="0" z="1.0" mass="2000"/> <!-- Armored cockpit -->
+<ballast x="-4.0" y="0" z="-1.0" mass="4000"/> <!-- Gun -->
+<ballast x="-5.0" y="0" z="0.0" mass="1000"/> <!-- avionics -->
+
+</airplane>