From 2ff2a63ca3eeeaae152190121d8e194d1476aa7a Mon Sep 17 00:00:00 2001 From: curt <curt> Date: Wed, 18 Dec 2002 02:30:45 +0000 Subject: [PATCH] Lee Elliott Here's a B52-H that I've done and it can be distributed under the same conditions etc. as fgfs. It seems to fly ok but I'm sure it could do with a bit of adjustment - perhaps Andy R. will have a look and give it a few tweaks. It wouldn't need too much work to convert it to an -A model (different engines, taller fin etc.) and then it could be teamed up with the X15 :) I still can't get textures on the models but it occurred to me that if someone could apply blank texture maps to the models I could then fill in the blanks, as it were. I also noticed that there don't appear to be models included for the F-104, F-15 & F-16 and I think I could probably do some and animate them for fgfs if they'd be useful. Re the A10 - Andy said he'd had a look at it and made a few changes to fix a few things that I'd done incorrectly and asked if I wanted to keep tinkering with it or should he roll his changes into the fgfs cvs? I said to him that I'd be happy to go with his changes as they'll be more realistic/accurate than the stuff I've done. I've certainly no problem with anyone doing anything with any of the stuff I've done, so long as it's an improvement :) --- Aircraft-yasim/b52-yasim.xml | 183 +++++++++++++++++++++++++++++++++++ 1 file changed, 183 insertions(+) create mode 100755 Aircraft-yasim/b52-yasim.xml diff --git a/Aircraft-yasim/b52-yasim.xml b/Aircraft-yasim/b52-yasim.xml new file mode 100755 index 000000000..775c25c2f --- /dev/null +++ b/Aircraft-yasim/b52-yasim.xml @@ -0,0 +1,183 @@ +<!-- B52-H yasim config. + + Lee Elliott. leee-fgfs@spatial.freeserve.co.uk +--> + +<airplane mass="185000"> + +<!-- Approach configuration --> +<approach speed="100" aoa="0.0"> + <control-setting axis="/controls/throttle[0]" value="0.6"/> + <control-setting axis="/controls/flaps" value="2.0"/> + <control-setting axis="/controls/gear-down" value="1"/> +</approach> + +<!-- Cruise configuration --> +<cruise speed="450" alt="0"> --> + <control-setting axis="/controls/throttle[0]" value="1.0"/> + <control-setting axis="/controls/flaps" value="0.0"/> + <control-setting axis="/controls/gear-down" value="0"/> +</cruise> + +<cockpit x="-2.2" y="0.0" z="2.0"/> + +<fuselage ax="0" ay="0" az="0" bx="-49.05" by="0" bz=".64" + width="3.2" taper="0.5" midpoint="0.3"/> + +<wing x="-16.0" y="1.6" z="1.2" taper="0.4" + length="31.1" chord="10.0" sweep="35" dihedral="-4.0" camber="0.01"> + <stall aoa="15.0" width="3" peak="1.3"/> + <flap0 start="0.0" end="0.7" lift="1.5" drag="1.2"/> + <flap1 start="0.75" end="0.9" lift="1.5" drag="1.2"/> + <spoiler start="0.5" end="0.75" lift="0.1" drag="20.0"/> + + <control-input axis="/controls/flaps" control="FLAP0"/> + <control-input axis="/controls/aileron" control="FLAP1" split="true"/> + <control-input axis="/controls/spoilers" control="SPOILER"/> + + <control-output control="FLAP0" prop="/surface-positions/flap-pos-norm"/> + <control-output control="FLAP1" side="left" + prop="/surface-positions/left-aileron-pos-norm"/> + <control-output control="FLAP1" side="right" + prop="/surface-positions/right-aileron-pos-norm"/> + <control-output control="SPOILER" side="left" + prop="/surface-positions/left-spoiler-pos-norm"/> + <control-output control="SPOILER" side="right" + prop="/surface-positions/right-spoiler-pos-norm"/> + + <control-speed control="FLAP0" transition-time="5"/> + <control-speed control="SPOILER" transition-time="0.5"/> + +</wing> + +<hstab x="-41.5" y="1.0" z="0.8" taper="0.25" effectiveness="1.0" + length="7.5" chord="7.5" sweep="40.0" dihedral="0.0"> + <stall aoa="15.0" width="3" peak="1.5"/> + <flap0 start="0" end="1" lift="1.7" drag="2.0"/> + <control-input axis="/controls/elevator" control="FLAP0"/> + <control-input axis="/controls/elevator-trim" control="FLAP0"/> + <control-output control="FLAP0" prop="/surface-positions/elevator-pos-norm"/> +</hstab> + +<vstab x="-41.5" y="0" z="2.0" taper="0.4" + length="8.5" chord="7.5" sweep="35.0"> + <stall aoa="15.0" width="3" peak="1.5"/> + <flap0 start="0" end="1" lift="1.15" drag="1.3"/> + <control-input axis="/controls/rudder" control="FLAP0" invert="true"/> + <control-output control="FLAP0" prop="/surface-positions/rudder-pos-norm"/> +</vstab> + +<!-- Left wing engines --> + +<!-- Left Outer Left --> +<jet x="-23.0" y="20.0" z="-1.0" + mass="4000" + thrust="17000"> + <control-input axis="/controls/throttle[0]" control="THROTTLE"/> +</jet> + +<!-- Left Outer Right --> +<jet x="-23.0" y="18.0" z="-1.0" + mass="4000" + thrust="17000"> + <control-input axis="/controls/throttle[0]" control="THROTTLE"/> +</jet> + +<!-- Left Inner Left --> +<jet x="-15.0" y="12.0" z="-1.0" + mass="4000" + thrust="17000"> + <control-input axis="/controls/throttle[0]" control="THROTTLE"/> +</jet> + +<!-- Left Inner Right --> +<jet x="-15.0" y="10.0" z="-1.0" + mass="4000" + thrust="17000"> + <control-input axis="/controls/throttle[0]" control="THROTTLE"/> +</jet> + +<!-- Right wing engines --> + +<!-- Right Inner Left --> +<jet x="-15.0" y="-10.0" z="-1.0" + mass="4000" + thrust="17000"> + <control-input axis="/controls/throttle[0]" control="THROTTLE"/> +</jet> + +<!-- Right Inner Right --> +<jet x="-15.0" y="-12.0" z="-1.0" + mass="4000" + thrust="17000"> + <control-input axis="/controls/throttle[0]" control="THROTTLE"/> +</jet> + +<!-- Right Outer Left --> +<jet x="-23.0" y="-18.0" z="-1.0" + mass="4000" + thrust="17000"> + <control-input axis="/controls/throttle[0]" control="THROTTLE"/> +</jet> + +<!-- Right Outer Right --> +<jet x="-23.0" y="-20.0" z="-1.0" + mass="4000" + thrust="17000"> + <control-input axis="/controls/throttle[0]" control="THROTTLE"/> +</jet> + +<!-- Front Left --> +<gear x="-13.2" y="2.0" z="-2.8" retract-time="7" compression="1.0"> + <control-input axis="/controls/rudder" control="STEER" square="true"/> + <control-input axis="/controls/gear-down" control="EXTEND"/> + <control-speed control="EXTEND" transition-time="7"/> + <control-output control="EXTEND" prop="/gear/gear/position-norm"/> +</gear> + +<!-- Front Right --> +<gear x="-13.2" y="-2.0" z="-2.8" retract-time="7" compression="1.0"> + <control-input axis="/controls/rudder" control="STEER" square="true"/> + <control-input axis="/controls/gear-down" control="EXTEND"/> + <control-speed control="EXTEND" transition-time="7"/> + <control-output control="EXTEND" prop="/gear/gear/position-norm"/> +</gear> + +<!-- Rear Left --> +<gear x="-28.0" y="2.0" z="-2.8" retract-time="7" compression="1.2"> + <control-input axis="/controls/brakes" control="BRAKE"/> + <control-input axis="/controls/gear-down" control="EXTEND"/> + <control-speed control="EXTEND" transition-time="7"/> + <control-output control="EXTEND" prop="/gear/gear/position-norm"/> +</gear> + +<!-- Rear Right --> +<gear x="-28.0" y="-2.0" z="-2.8" retract-time="7" compression="1.2"> + <control-input axis="/controls/brakes" control="BRAKE"/> + <control-input axis="/controls/gear-down" control="EXTEND"/> + <control-speed control="EXTEND" transition-time="7"/> + <control-output control="EXTEND" prop="/gear/gear/position-norm"/> +</gear> + +<!-- Left Wing --> +<gear x="-31.0" y="23.0" z="-2.0" retract-time="7" compression="3.5"> + <control-input axis="/controls/brakes[0]" control="BRAKE"/> + <control-input axis="/controls/gear-down" control="EXTEND"/> + <control-speed control="EXTEND" transition-time="7"/> + <control-output control="EXTEND" prop="/gear/gear/position-norm"/> +</gear> + +<!-- Right Wing --> +<gear x="-31.0" y="-23.0" z="-2.0" retract-time="7" compression="3.5"> + <control-input axis="/controls/brakes[1]" control="BRAKE"/> + <control-input axis="/controls/gear-down" control="EXTEND"/> + <control-speed control="EXTEND" transition-time="7"/> + <control-output control="EXTEND" prop="/gear/gear/position-norm"/> +</gear> + +<tank x="-20.0" y="6.0" z="2.0" capacity="80000"/> +<tank x="-20.0" y="-6.0" z="2.0" capacity="80000"/> + +<ballast x="-10.0" y="0" z="1" mass="30000"/> + +</airplane>