1
0
Fork 0

Lee Elliott:

Added a Hawker Sea Hawk: --aircraft=seahawk-yasim.
This commit is contained in:
curt 2003-01-03 16:58:08 +00:00
parent bd81d17ec4
commit 177e960c1d
3 changed files with 214 additions and 0 deletions

132
Aircraft-yasim/seahawk-yasim.xml Executable file
View file

@ -0,0 +1,132 @@
<!-- Hawker Sea Hawk yasim config. This is a hack and not an
authentic representation of the aircraft. Having said
that, the numbers, where I could find them, roughly match
those of the original aircraft.
Lee Elliott. leee-fgfs@spatial.freeserve.co.uk
-->
<airplane mass="9720">
<!-- Approach configuration.
I couldn't find any approach data but I think that the way
the aircraft sits tail down on it's u/c indicates that it
must land at a fairly shallow AoA to avoid hitting tail
first. The speed is a guess.
I could see no sign or mention of spoilers or airbrakes in any
of the docs or pictures I found.
-->
<approach speed="110" aoa="7">
<control-setting axis="/controls/throttle[0]" value="0.5"/>
<control-setting axis="/controls/flaps" value="1.0"/>
<control-setting axis="/controls/gear-down" value="1"/>
</approach>
<!-- Cruise configuration.
Max speed at sea level is 599 mph = 521 knots. The same source
also quoted 587 mph at 'altitude'.
-->
<cruise speed="521" alt="0">
<control-setting axis="/controls/throttle[0]" value="1.0"/>
<control-setting axis="/controls/flaps" value="0.0"/>
<control-setting axis="/controls/gear-down" value="0"/>
</cruise>
<cockpit x="3.0" y="0.0" z="0.7"/>
<fuselage ax="5.10" ay="0" az="0" bx="5.88" by="0" bz="0"
width="1.3"/>
<!-- The wing length is from tips to fuselage, including intakes.
The aileron figures are probably too low but the roll rate seemed
too high otherwise.
-->
<wing x="0.1" y="0.65" z="0.0" taper="0.5" incidence="0.0"
length="5.3" chord="3.0" sweep="-3.0" dihedral="3.0" camber="0.006">
<stall aoa="17" width="3" peak="1.3"/>
<flap0 start="0.1" end="0.4" lift="1.4" drag="1.6"/>
<flap1 start="0.4" end="0.95" lift="1.05" drag="1.2"/>
<control-input axis="/controls/flaps" control="FLAP0"/>
<control-input axis="/controls/aileron" control="FLAP1" split="true"/>
<control-input axis="/controls/aileron-trim" control="FLAP1" split="true"/>
<control-output control="FLAP0" prop="/surface-positions/flap-pos-norm"/>
<control-output control="FLAP1" side="left"
prop="/surface-positions/left-aileron-pos-norm"/>
<control-output control="FLAP1" side="right"
prop="/surface-positions/right-aileron-pos-norm"/>
<control-output control="SPOILER" side="right"
prop="/surface-positions/right-spoiler-pos-norm"/> -->
<control-speed control="FLAP0" transition-time="5"/>
</wing>
<hstab x="-5.2" y="0.10" z="0.76" taper="0.3" effectiveness="1.6"
length="1.7" chord="1.2" sweep="0.0" dihedral="0.0" camber="0.0">
<stall aoa="17" width="5" peak="1.5"/>
<flap0 start="0" end="1" lift="1.5" drag="1.2"/>
<control-input axis="/controls/elevator" control="FLAP0"/>
<control-input axis="/controls/elevator-trim" control="FLAP0"/>
<control-output control="FLAP0" prop="/surface-positions/elevator-pos-norm"/>
</hstab>
<vstab x="-5.2" y="0.0" z="0.2" taper="0.8"
length="1.4" chord="1.8" sweep="10.0">
<stall aoa="16" width="5" peak="1.5"/>
<flap0 start="0" end="1" lift="1.15" drag="1.3"/>
<control-input axis="/controls/rudder" control="FLAP0" invert="true"/>
<control-output control="FLAP0" prop="/surface-positions/rudder-pos-norm"/>
</vstab>
<!-- Engines and tanks.
1 x Roll-Royce Nene 103. I've no idea how much it actually
weighs.
-->
<jet x="0.3" y="0.0" z="0.0" mass="1000" thrust="5200">
<control-input axis="/controls/throttle[0]" control="THROTTLE"/>
</jet>
<!-- Fuel tanks in front of and behind the engine.
-->
<tank x="1.4" y="0.0" z="0.0" jet="true" capacity="2600"/>
<tank x="-1.3" y="0.0" z="0.0" jet="true" capacity="2600"/>
<!-- Undercarriage -->
<!-- nose -->
<gear x="4.0" y="0.0" z="-1.39" retract-time="7" compression="0.6">
<control-input axis="/controls/rudder" control="STEER" square="true"/>
<control-input axis="/controls/gear-down" control="EXTEND"/>
<control-speed control="EXTEND" transition-time="7"/>
<control-output control="EXTEND" prop="/gear/gear/position-norm"/>
</gear>
<!-- left main -->
<gear x="0.08" y="1.4" z="-1.3" retract-time="7" compression="0.6">
<control-input axis="/controls/brakes[0]" control="BRAKE"/>
<control-input axis="/controls/gear-down" control="EXTEND"/>
<control-speed control="EXTEND" transition-time="7"/>
<control-output control="EXTEND" prop="/gear/gear[0]/position-norm"/>
</gear>
<!-- right main -->
<gear x="0.08" y="-1.4" z="-1.3" retract-time="7" compression="0.6">
<control-input axis="/controls/brakes[1]" control="BRAKE"/>
<control-input axis="/controls/gear-down" control="EXTEND"/>
<control-speed control="EXTEND" transition-time="7"/>
<control-output control="EXTEND" prop="/gear/gear[1]/position-norm"/>
</gear>
<!-- Canopy -->
<gear x="3.0" y="0.0" z="0.6" retract-time="7" compression="0.6">
<control-input axis="/controls/parking-brake" control="EXTEND"/>
<control-speed control="EXTEND" transition-time="10"/>
<control-output control="EXTEND" prop="/canopy/position-norm"/>
</gear>
<!-- Ballast -->
<ballast x="3.0" y="0" z="1.0" mass="1200"/> <!-- C/pit + Pilot -->
<ballast x="3.5" y="0" z="-0.5" mass="1000"/> <!-- Gun -->
<ballast x="2.0" y="0" z="0.0" mass="1000"/> <!-- trim ballast -->
</airplane>

73
Aircraft/seahawk-yasim-set.xml Executable file
View file

@ -0,0 +1,73 @@
<?xml version="1.0"?>
<!--
************************************************************************
Hawker Sea Hawk simulation config.
2002-12-26 Lee Elliott leee-fgfs@spatial.freeserve.co.uk
************************************************************************
-->
<PropertyList>
<sim>
<flight-model>yasim</flight-model>
<aero>seahawk-yasim</aero>
<fuel-fraction>1.0</fuel-fraction>
<sound>
<audible>true</audible>
<path>Aircraft/a4/a4-sound.xml</path>
</sound>
<panel>
<path>Aircraft/c310/c310-vfr-panel.xml</path>
</panel>
<panel_2>
<path>Aircraft/c310/c310-mini-panel.xml</path>
</panel_2>
<hud>
<path>Huds/Default/default.xml</path>
<visibility>true</visibility>
</hud>
<model>
<path>Aircraft/seahawk/seahawk-model.xml</path>
</model>
<view n="1">
<config>
<z-offset-m type="double" archive="y">-30.0</z-offset-m>
</config>
</view>
</sim>
<autopilot>
<config>
<min-climb-speed-kt type="float">100.0</min-climb-speed-kt>
<best-climb-speed-kt type="float">550.0</best-climb-speed-kt>
<target-climb-rate-fpm type="float">6000.0</target-climb-rate-fpm>
<target-descent-rate-fpm type="float">6000.0</target-descent-rate-fpm>
<elevator-adj-factor type="float">300.0</elevator-adj-factor>
<integral-contribution type="float">0.005</integral-contribution>
<max-aileron type="float">0.5</max-aileron>
<max-roll-deg type="float">60.0</max-roll-deg>
<roll-out-deg type="float">8</roll-out-deg>
<roll-out-smooth-deg type="float">15.0</roll-out-smooth-deg>
<zero-pitch-throttle type="float">0.5</zero-pitch-throttle>
<zero-pitch-trim-full-throttle type="float">0.001</zero-pitch-trim-full-throttle>
</config>
</autopilot>
</PropertyList>

9
Thanks
View file

@ -172,6 +172,7 @@ Erik Hofman <erik@ehofman.com>
Major overhaul and parameterization of the sound module, to allow
aircraft-specific sound configuration at runtime.
Irix port.
Localization support.
Charlie Hotchkiss <clhotch@pacbell.net>
@ -233,6 +234,7 @@ David Megginson <david@megginson.com>
3D model animation module
initial take of sound-effects module
Random ground cover objects
Vacuum and pitot systems.
Eric Mitchell <mitchell@mars.ark.com>
@ -278,6 +280,8 @@ Curt Olson <curt@flightgear.org>
He has his hands in many of the areas, but is primarily responsible
for the scenery subsystem, as well as much of the infrastructure in
the sim.
Electrical system.
Runway lighting.
Brian Paul
@ -466,6 +470,11 @@ Jean-Claude Wippler <jcw@equi4.com>
http://www.equi4.com/metakit
John Wojnaroski <castle@mminternet.com>
Open Glass Cockpit project
3d clouds
WoodSoup Project http://www.woodsoup.org
[ FlightGear no longer uses woodsoup services, but we appreciate
the support provided to our project during the time they hosted us. ]