fly/fgdata
1
0
Fork 0
Code Activity
fgdata/Input/Joysticks/Saitek/Cyborg-Gold-3d-USB.xml

305 lines
7.6 KiB
XML
Raw Normal View History

Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<!--
Joystick binding definitions for Saitek Cyborg 3D Gold USB joystick.
Alex Perry: Since several people on the list have been asking questions about this Saitek joystick and the comments at the top of this xml file in cvs were wrong and confusing, I am posting this update with the following changes: 1. Removed the confusing/wrong comments. 2. Added throttle bindings for engines 2 thru 7 (required for the b52). 3. Changed the hat axis to rotate the view continuously (required to see the mag switch in the p51d and just a lot nicer with any 3d cockpit). This last change makes the hat point the line of sight more like moving your head. This is the way the CH pro-yoke-USB is set up. If you are not used to this set up and you use aircraft with 2d pannels, you will likely need to use shift-nuberpad-8 to get the original forward view once you look arround.
2003-07-31 14:54:46 +00:00
This file defines primary flight-control bindings as follow:
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
axis 0 (left-right): aileron
axis 1 (forward-backward): elevator
axis 2 (twist left-right): rudder
axis 3 (slider): throttle
axis 4 (hat left-right): look left or right
axis 5 (hat forward-back): look ahead or behind
button 0 (trigger): brakes
button 1: (left of hat) reduce RPM (constant speed prop)
button 2: (below hat) external view cycle
button 3: (right of hat) increase RPM (constant speed prop)
button 4: (F1) trim nose down
button 5: (F2) retract flaps
button 6: (F3) trim nose up
button 7: (F4) extend flaps
button 8: (>>) mixture rich
button 9: (<<) mixture lean
Alex Perry: Since several people on the list have been asking questions about this Saitek joystick and the comments at the top of this xml file in cvs were wrong and confusing, I am posting this update with the following changes: 1. Removed the confusing/wrong comments. 2. Added throttle bindings for engines 2 thru 7 (required for the b52). 3. Changed the hat axis to rotate the view continuously (required to see the mag switch in the p51d and just a lot nicer with any 3d cockpit). This last change makes the hat point the line of sight more like moving your head. This is the way the CH pro-yoke-USB is set up. If you are not used to this set up and you use aircraft with 2d pannels, you will likely need to use shift-nuberpad-8 to get the original forward view once you look arround.
2003-07-31 14:54:46 +00:00
hat left look left (rotate view left)
hat right look right (rotate view right)
hat back look look (decrease view elevation)
hat forward look up (increase view elevation)
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
-->
<PropertyList>
<name>SAITEK CYBORG 3D USB</name>
Alex Perry: Since several people on the list have been asking questions about this Saitek joystick and the comments at the top of this xml file in cvs were wrong and confusing, I am posting this update with the following changes: 1. Removed the confusing/wrong comments. 2. Added throttle bindings for engines 2 thru 7 (required for the b52). 3. Changed the hat axis to rotate the view continuously (required to see the mag switch in the p51d and just a lot nicer with any 3d cockpit). This last change makes the hat point the line of sight more like moving your head. This is the way the CH pro-yoke-USB is set up. If you are not used to this set up and you use aircraft with 2d pannels, you will likely need to use shift-nuberpad-8 to get the original forward view once you look arround.
2003-07-31 14:54:46 +00:00
<name>CYBORG 3D USB</name>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<axis n="0">
<desc>Aileron</desc>
<binding>
<command>property-scale</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/aileron</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<squared type="bool">true</squared>
</binding>
</axis>
<axis n="1">
<desc>Elevator</desc>
<binding>
<command>property-scale</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/elevator</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<factor type="double">-1.0</factor>
<squared type="bool">true</squared>
</binding>
</axis>
<axis n="2">
<desc>Rudder</desc>
<binding>
<command>property-scale</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/rudder</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<offset type="double">0.0</offset>
<factor type="double">1.0</factor>
</binding>
</axis>
<axis n="3">
<desc>Throttle</desc>
<binding>
<command>property-scale</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/engines/engine[0]/throttle</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<offset type="double">-1.0</offset>
<factor type="double">-0.5</factor>
</binding>
<binding>
<command>property-scale</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/engines/engine[1]/throttle</property>
Melchior FRANZ: here's the promised patch: - make throttle work for 8 engines (b52) - resolve multiple property bindings (simply stating more than one property per binding doesn't do anything; this has to be written as two bindings; didn't touch "Reset View" button in X45, though) - add $Id$ lines - adjust step size in "my" joystick file (X8-30) to work best on a 2.4GHz computer :-> I didn't add entries for propeller related properties, such as mixture, prop-pitch, and I didn't change the boost property. These are still for at most two engines.
2003-06-29 08:33:59 +00:00
<offset type="double">-1.0</offset>
<factor type="double">-0.5</factor>
</binding>
<binding>
<command>property-scale</command>
<property>/controls/engines/engine[2]/throttle</property>
<offset type="double">-1.0</offset>
<factor type="double">-0.5</factor>
</binding>
<binding>
<command>property-scale</command>
<property>/controls/engines/engine[3]/throttle</property>
<offset type="double">-1.0</offset>
<factor type="double">-0.5</factor>
</binding>
<binding>
<command>property-scale</command>
<property>/controls/engines/engine[4]/throttle</property>
<offset type="double">-1.0</offset>
<factor type="double">-0.5</factor>
</binding>
<binding>
<command>property-scale</command>
<property>/controls/engines/engine[5]/throttle</property>
<offset type="double">-1.0</offset>
<factor type="double">-0.5</factor>
</binding>
<binding>
<command>property-scale</command>
<property>/controls/engines/engine[6]/throttle</property>
<offset type="double">-1.0</offset>
<factor type="double">-0.5</factor>
</binding>
<binding>
<command>property-scale</command>
<property>/controls/engines/engine[7]/throttle</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<offset type="double">-1.0</offset>
<factor type="double">-0.5</factor>
</binding>
</axis>
<axis n="4">
Alex Perry: Since several people on the list have been asking questions about this Saitek joystick and the comments at the top of this xml file in cvs were wrong and confusing, I am posting this update with the following changes: 1. Removed the confusing/wrong comments. 2. Added throttle bindings for engines 2 thru 7 (required for the b52). 3. Changed the hat axis to rotate the view continuously (required to see the mag switch in the p51d and just a lot nicer with any 3d cockpit). This last change makes the hat point the line of sight more like moving your head. This is the way the CH pro-yoke-USB is set up. If you are not used to this set up and you use aircraft with 2d pannels, you will likely need to use shift-nuberpad-8 to get the original forward view once you look arround.
2003-07-31 14:54:46 +00:00
<desc>View Direction</desc>
<low>
<repeatable>true</repeatable>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<binding>
Alex Perry: Since several people on the list have been asking questions about this Saitek joystick and the comments at the top of this xml file in cvs were wrong and confusing, I am posting this update with the following changes: 1. Removed the confusing/wrong comments. 2. Added throttle bindings for engines 2 thru 7 (required for the b52). 3. Changed the hat axis to rotate the view continuously (required to see the mag switch in the p51d and just a lot nicer with any 3d cockpit). This last change makes the hat point the line of sight more like moving your head. This is the way the CH pro-yoke-USB is set up. If you are not used to this set up and you use aircraft with 2d pannels, you will likely need to use shift-nuberpad-8 to get the original forward view once you look arround.
2003-07-31 14:54:46 +00:00
<command>property-adjust</command>
<property>/sim/current-view/goal-heading-offset-deg</property>
<step type="double">2.0</step>
</binding>
</low>
<high>
<repeatable>true</repeatable>
<binding>
<command>property-adjust</command>
<property>/sim/current-view/goal-heading-offset-deg</property>
<step type="double">-2.0</step>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
</binding>
Alex Perry: Since several people on the list have been asking questions about this Saitek joystick and the comments at the top of this xml file in cvs were wrong and confusing, I am posting this update with the following changes: 1. Removed the confusing/wrong comments. 2. Added throttle bindings for engines 2 thru 7 (required for the b52). 3. Changed the hat axis to rotate the view continuously (required to see the mag switch in the p51d and just a lot nicer with any 3d cockpit). This last change makes the hat point the line of sight more like moving your head. This is the way the CH pro-yoke-USB is set up. If you are not used to this set up and you use aircraft with 2d pannels, you will likely need to use shift-nuberpad-8 to get the original forward view once you look arround.
2003-07-31 14:54:46 +00:00
</high>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
</axis>
<axis n="5">
Alex Perry: Since several people on the list have been asking questions about this Saitek joystick and the comments at the top of this xml file in cvs were wrong and confusing, I am posting this update with the following changes: 1. Removed the confusing/wrong comments. 2. Added throttle bindings for engines 2 thru 7 (required for the b52). 3. Changed the hat axis to rotate the view continuously (required to see the mag switch in the p51d and just a lot nicer with any 3d cockpit). This last change makes the hat point the line of sight more like moving your head. This is the way the CH pro-yoke-USB is set up. If you are not used to this set up and you use aircraft with 2d pannels, you will likely need to use shift-nuberpad-8 to get the original forward view once you look arround.
2003-07-31 14:54:46 +00:00
<desc>View elevation</desc>
<low>
<repeatable>true</repeatable>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<binding>
Alex Perry: Since several people on the list have been asking questions about this Saitek joystick and the comments at the top of this xml file in cvs were wrong and confusing, I am posting this update with the following changes: 1. Removed the confusing/wrong comments. 2. Added throttle bindings for engines 2 thru 7 (required for the b52). 3. Changed the hat axis to rotate the view continuously (required to see the mag switch in the p51d and just a lot nicer with any 3d cockpit). This last change makes the hat point the line of sight more like moving your head. This is the way the CH pro-yoke-USB is set up. If you are not used to this set up and you use aircraft with 2d pannels, you will likely need to use shift-nuberpad-8 to get the original forward view once you look arround.
2003-07-31 14:54:46 +00:00
<command>property-adjust</command>
<property>/sim/current-view/goal-pitch-offset-deg</property>
<step type="double">-2.0</step>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
</binding>
Alex Perry: Since several people on the list have been asking questions about this Saitek joystick and the comments at the top of this xml file in cvs were wrong and confusing, I am posting this update with the following changes: 1. Removed the confusing/wrong comments. 2. Added throttle bindings for engines 2 thru 7 (required for the b52). 3. Changed the hat axis to rotate the view continuously (required to see the mag switch in the p51d and just a lot nicer with any 3d cockpit). This last change makes the hat point the line of sight more like moving your head. This is the way the CH pro-yoke-USB is set up. If you are not used to this set up and you use aircraft with 2d pannels, you will likely need to use shift-nuberpad-8 to get the original forward view once you look arround.
2003-07-31 14:54:46 +00:00
</low>
<high>
<repeatable>true</repeatable>
<binding>
<command>property-adjust</command>
<property>/sim/current-view/goal-pitch-offset-deg</property>
<step type="double">2.0</step>
</binding>
</high>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
</axis>
Alex Perry: Since several people on the list have been asking questions about this Saitek joystick and the comments at the top of this xml file in cvs were wrong and confusing, I am posting this update with the following changes: 1. Removed the confusing/wrong comments. 2. Added throttle bindings for engines 2 thru 7 (required for the b52). 3. Changed the hat axis to rotate the view continuously (required to see the mag switch in the p51d and just a lot nicer with any 3d cockpit). This last change makes the hat point the line of sight more like moving your head. This is the way the CH pro-yoke-USB is set up. If you are not used to this set up and you use aircraft with 2d pannels, you will likely need to use shift-nuberpad-8 to get the original forward view once you look arround.
2003-07-31 14:54:46 +00:00
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<button n="0">
<desc>Brakes</desc>
<binding>
<command>property-assign</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/gear/wheel[0]/brake</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<value type="double">1.0</value>
</binding>
<binding>
<command>property-assign</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/gear/wheel[1]/brake</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<value type="double">1.0</value>
</binding>
<binding>
<command>property-assign</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/gear/wheel[2]/brake</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<value type="double">1.0</value>
</binding>
<mod-up>
<binding>
<command>property-assign</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/gear/wheel[0]/brake</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<value type="double">0.0</value>
</binding>
<binding>
<command>property-assign</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/gear/wheel[1]/brake</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<value type="double">0.0</value>
</binding>
<binding>
<command>property-assign</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/gear/wheel[2]/brake</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<value type="double">0.0</value>
</binding>
</mod-up>
</button>
<button n="1">
<desc>Reduce RPM</desc>
<repeatable type="bool">true</repeatable>
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/engines/engine[0]/propeller-pitch</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<step type="double">-0.01</step>
</binding>
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/engines/engine[1]/propeller-pitch</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<step type="double">-0.01</step>
</binding>
</button>
<button n="2">
<desc>External Views</desc>
<repeatable type="bool">false</repeatable>
<binding>
<command>view-cycle</command>
<step type="double">1</step>
</binding>
</button>
<button n="3">
<desc>Increase RPM</desc>
<repeatable type="bool">true</repeatable>
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/engines/engine[0]/propeller-pitch</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<step type="double">+0.01</step>
</binding>
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/engines/engine[1]/propeller-pitch</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<step type="double">+0.01</step>
</binding>
</button>
<button n="4">
<desc>Elevator trim down</desc>
<repeatable type="bool">true</repeatable>
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/elevator-trim</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<step type="double">0.001</step>
</binding>
</button>
<button n="5">
<desc>Step Flaps Up</desc>
<repeatable type="bool">false</repeatable>
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/flaps</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<step type="double">-0.34</step>
</binding>
</button>
<button n="6">
<desc>Elevator trim up</desc>
<repeatable type="bool">true</repeatable>
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/elevator-trim</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<step type="double">-0.001</step>
</binding>
</button>
<button n="7">
<desc>Step Flaps Down</desc>
<repeatable type="bool">false</repeatable>
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/flaps</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<step type="double">+0.34</step>
</binding>
</button>
<button n="8">
<desc>Richer Mixture</desc>
<repeatable type="bool">true</repeatable>
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/engines/engine[0]/mixture</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<step type="double">+0.01</step>
</binding>
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/engines/engine[1]/mixture</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<step type="double">+0.01</step>
</binding>
</button>
<button n="9">
<desc>Leaner Mixture</desc>
<repeatable type="bool">true</repeatable>
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/engines/engine[0]/mixture</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<step type="double">-0.01</step>
</binding>
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/engines/engine[1]/mixture</property>
Added configuration for Saitek Cyborg Gold 3D USB from Dave Perry.
2002-09-07 11:10:04 +00:00
<step type="double">-0.01</step>
</binding>
</button>
</PropertyList>
Copy permalink