fgdata/Huds/Instruments/Custom/hudcard.xml

<?xml version="1.0"?>

<!--
HudCards for ADA.

Started November 2000 by Neetha Girish, neetha@ada.ernet.in

Based on Panel Instruments by David Megginson, david@megginson.com.

This is an instrument configuration file for the open-source flight
simulator FlightGear (www.flightgear.org).  The file is an XML-encoded
FlightGear property list defining the instrument's properties.

-->

<PropertyList>

 <cards>

  <c1>
<!-- changes made by suma this angle is to rotate thru the envt.-->
<!-- suma
     To display the hud-card as a type of gauge, radius and number of divisions are included.
     radius-> of the circle and divisions-> number of divisions in a circle. so it should be multiple of 4.
     all the moved values are used when the type="tape". and when the type="gauge" radius and divisions are used.
-->


<!-- for a vertical scale the option value should be 6,10 or 14. 
       6  -> left side arrow
	 10 -> right side arrow
       14 -> both sides arrow -->
<!-- for a horizontal scale the option value should be 6,10 or 14. 
       4  -> top facing arrow 
	 8 ->  bottom facing arrow
       12 -> both sides arrow -->


   <name>Gyrocompass</name>
   <x>260</x> <!--  260 -->
   <y>248</y> <!-- 248 -->
   <width>120</width> 
   <height>28</height>
   <loadfn>heading</loadfn>
   <options>4</options>		<!-- Read ReadMe.xmlhud -->
   <maxValue>360.0</maxValue>
   <minValue>0.0</minValue>
   <disp_scaling>0.1</disp_scaling> <!-- 0.1 -->
   <major_divs>10</major_divs>
   <minor_divs>5</minor_divs>
   <modulator>360</modulator>
   <value_span>60.0</value_span>
   <type>tape</type>  <!-- when the type is "gauge",only radius is needed. -->
   	<tick_bottom>false</tick_bottom>
	<tick_top>false</tick_top>
	<tick_right>false</tick_right>
   	<tick_left>false</tick_left>
      <cap_bottom>false</cap_bottom>
      <cap_top>false</cap_top>
   	<cap_right>false</cap_right>
      <cap_left>false</cap_left>
   	<marker_offset>10.0</marker_offset>
   	<enable_pointer>false</enable_pointer>
   	<pointer_type>fixed</pointer_type>  <!-- this should be always fixed type for compass -->
      <tick_type>line</tick_type>
      <tick_length>variable</tick_length>
   <working>true</working>
   	<radius>40.0</radius> <!-- for type=gauge -->
 	<divisions>12</divisions> <!-- it should be multiple of 4 -->
      <zoom>0</zoom> <!-- for VSI -->
   </c1>

  <c2>
   <name>AOA</name>
   <x>180</x> <!-- 175 -->
   <y>100</y> 
   <width>28</width>
   <height>100</height>
   <loadfn>aoa</loadfn>
   <options>6</options> 
   <maxValue>20.0</maxValue>
   <minValue>0.0</minValue>
   <disp_scaling>1.0</disp_scaling>
   <major_divs>4</major_divs>
   <minor_divs>2</minor_divs>
   <modulator>0</modulator>
   <value_span>20.0</value_span>
   <type>tape</type>
   	<tick_bottom>false</tick_bottom>
   	<tick_top>false</tick_top>
   	<tick_right>false</tick_right>
   	<tick_left>false</tick_left>
   	<cap_bottom>false</cap_bottom>
   	<cap_top>false</cap_top>
   	<cap_right>false</cap_right>
   	<cap_left>false</cap_left>
   	<marker_offset>10.0</marker_offset>
   	<enable_pointer>true</enable_pointer>
   	<pointer_type>moving</pointer_type>
   	<tick_type>circle</tick_type>
   	<tick_length>constant</tick_length>
   <working>true</working>
   	<radius>30.0</radius>  <!-- for type=gauge -->
	<divisions>12</divisions> <!-- it should be multiple of 4 -->
  <zoom>0</zoom> <!-- for VSI -->

  </c2>

  <c3>
   <name>NormalAcceleration</name>
   <x>140</x>
   <y>110</y>
   <width>18</width>
   <height>100</height>
   <loadfn>anzg</loadfn>
   <options>6</options>
   <maxValue>9.0</maxValue>
   <minValue>-3.0</minValue>
   <disp_scaling>1</disp_scaling>
   <major_divs>2</major_divs>
   <minor_divs>1</minor_divs>
   <modulator>0</modulator>
   <value_span>12.0</value_span>
   <type>tape</type>
   	<tick_bottom>false</tick_bottom>
   	<tick_top>false</tick_top>
   	<tick_right>false</tick_right>
   	<tick_left>false</tick_left>
   	<cap_bottom>false</cap_bottom>
   	<cap_top>false</cap_top>
   	<cap_right>false</cap_right>
   	<cap_left>false</cap_left>
   	<marker_offset>10.0</marker_offset>
   	<enable_pointer>true</enable_pointer>
   	<pointer_type>moving</pointer_type>
   	<tick_type>line</tick_type>
   	<tick_length>variable</tick_length>
   <working>false</working>
   	<radius>40.0</radius> <!-- for type=gauge -->
	<divisions>12</divisions> <!-- it should be multiple of 4 -->
   <zoom>0</zoom> <!-- for VSI -->

 </c3>
<!-- for moving type pointer adjust the values of value_span, major_divs, minor_divs, disp_scaling -->
  <c4>
   <name>VSI</name>
   <x>430</x> <!-- 445 -->
   <y>50</y>
   <width>28</width>
   <height>150</height>
   <loadfn>climb</loadfn>
   <options>10</options>
   <maxValue>1000.0</maxValue>
   <minValue>-1000.0</minValue>
   <disp_scaling>1.0</disp_scaling>
   <major_divs>200</major_divs>
   <minor_divs>100</minor_divs>
   <modulator>0</modulator>
   <value_span>2000.0</value_span> <!-- set value_span = maxValue + minValue for moving type pointer -->
   <type>tape</type>
   	<tick_bottom>false</tick_bottom>
   	<tick_top>false</tick_top>
   	<tick_right>false</tick_right>
   	<tick_left>false</tick_left>
   	<cap_bottom>false</cap_bottom>
   	<cap_top>false</cap_top>
   	<cap_right>false</cap_right>
   	<cap_left>false</cap_left>
   	<marker_offset>10.0</marker_offset>
   	<enable_pointer>true</enable_pointer>
   	<pointer_type>moving</pointer_type>
   	<tick_type>line</tick_type>
   	<tick_length>variable</tick_length>
   <working>true</working>
   <radius>40.0</radius> <!-- for type=gauge -->
   <divisions>12</divisions> <!-- it should be multiple of 4 -->
   <zoom>1</zoom> <!-- for VSI -->

 </c4>

 </cards>

</PropertyList>