fly/fgdata
1
0
Fork 0
Code Activity
fgdata/Aircraft/b52-yasim-set.xml

94 lines
2.2 KiB
XML
Raw Normal View History

Lee Elliott: Here's a B52-H that I've done and it can be distributed under the same conditions etc. as fgfs. It seems to fly ok but I'm sure it could do with a bit of adjustment - perhaps Andy R. will have a look and give it a few tweaks. It wouldn't need too much work to convert it to an -A model (different engines, taller fin etc.) and then it could be teamed up with the X15 :) I still can't get textures on the models but it occurred to me that if someone could apply blank texture maps to the models I could then fill in the blanks, as it were. I also noticed that there don't appear to be models included for the F-104, F-15 & F-16 and I think I could probably do some and animate them for fgfs if they'd be useful. Re the A10 - Andy said he'd had a look at it and made a few changes to fix a few things that I'd done incorrectly and asked if I wanted to keep tinkering with it or should he roll his changes into the fgfs cvs? I said to him that I'd be happy to go with his changes as they'll be more realistic/accurate than the stuff I've done. I've certainly no problem with anyone doing anything with any of the stuff I've done, so long as it's an improvement :)
2002-12-18 02:32:08 +00:00
<?xml version="1.0"?>
<!--
************************************************************************
B52-H set file.
2002-12-17 Lee Elliott leee-fgfs@spatial.freeserve.co.uk
************************************************************************
-->
<PropertyList>
<sim>
<flight-model>yasim</flight-model>
<aero>b52-yasim</aero>
<fuel-fraction>1.0</fuel-fraction>
<sound>
<audible>true</audible>
Lee Elliott: Here're some updates for some of the instruments, the TSR2 and the B52. The instruments are just parameterised/non-specific versions of the engine and fuel gauges. The old gauges will still be used by the a10s and the sea hawks until I get them done. There're a couple of tweaks to the tsr2 yasim config and amendments to the model file to change the angle at which the airbrakes operate, correct the direction that the nose gear retracts/extends and to rotate the main-gear carts during retraction/extention. There're also new panels, using the new instruments. The b52 yasim config has some big changes due to finding some more info i.e. wing incidence of 6 degrees, fuel capacities and aileron changes (removed from G & H versions!). It's now based on an 'F' model and I've put some comments in the yasim config about it. The b52-readme.txt includes a suggested method on getting airborne;). I've included an amended model - B52-F.3ds, which is the default in the new model file, and a couple of panels. I'm quite pleased with the b52 - the take-offs resemble the photographs I've seen and I think I've got reasonable values where I've had to guess at stuff, but the results from the yasim solver look as through the model is approaching the limits of acceptability for yasim. By this I mean that the model is probably a bit dodgy, not that the yasim solver is limited.
2003-02-06 17:32:55 +00:00
<path>Aircraft/a4/a4-sound.xml</path>
Lee Elliott: Here's a B52-H that I've done and it can be distributed under the same conditions etc. as fgfs. It seems to fly ok but I'm sure it could do with a bit of adjustment - perhaps Andy R. will have a look and give it a few tweaks. It wouldn't need too much work to convert it to an -A model (different engines, taller fin etc.) and then it could be teamed up with the X15 :) I still can't get textures on the models but it occurred to me that if someone could apply blank texture maps to the models I could then fill in the blanks, as it were. I also noticed that there don't appear to be models included for the F-104, F-15 & F-16 and I think I could probably do some and animate them for fgfs if they'd be useful. Re the A10 - Andy said he'd had a look at it and made a few changes to fix a few things that I'd done incorrectly and asked if I wanted to keep tinkering with it or should he roll his changes into the fgfs cvs? I said to him that I'd be happy to go with his changes as they'll be more realistic/accurate than the stuff I've done. I've certainly no problem with anyone doing anything with any of the stuff I've done, so long as it's an improvement :)
2002-12-18 02:32:08 +00:00
</sound>
<panel>
Lee Elliott: Here're some updates for some of the instruments, the TSR2 and the B52. The instruments are just parameterised/non-specific versions of the engine and fuel gauges. The old gauges will still be used by the a10s and the sea hawks until I get them done. There're a couple of tweaks to the tsr2 yasim config and amendments to the model file to change the angle at which the airbrakes operate, correct the direction that the nose gear retracts/extends and to rotate the main-gear carts during retraction/extention. There're also new panels, using the new instruments. The b52 yasim config has some big changes due to finding some more info i.e. wing incidence of 6 degrees, fuel capacities and aileron changes (removed from G & H versions!). It's now based on an 'F' model and I've put some comments in the yasim config about it. The b52-readme.txt includes a suggested method on getting airborne;). I've included an amended model - B52-F.3ds, which is the default in the new model file, and a couple of panels. I'm quite pleased with the b52 - the take-offs resemble the photographs I've seen and I think I've got reasonable values where I've had to guess at stuff, but the results from the yasim solver look as through the model is approaching the limits of acceptability for yasim. By this I mean that the model is probably a bit dodgy, not that the yasim solver is limited.
2003-02-06 17:32:55 +00:00
<path>Aircraft/b52/b52-vfr-panel.xml</path>
Lee Elliott: Here's a B52-H that I've done and it can be distributed under the same conditions etc. as fgfs. It seems to fly ok but I'm sure it could do with a bit of adjustment - perhaps Andy R. will have a look and give it a few tweaks. It wouldn't need too much work to convert it to an -A model (different engines, taller fin etc.) and then it could be teamed up with the X15 :) I still can't get textures on the models but it occurred to me that if someone could apply blank texture maps to the models I could then fill in the blanks, as it were. I also noticed that there don't appear to be models included for the F-104, F-15 & F-16 and I think I could probably do some and animate them for fgfs if they'd be useful. Re the A10 - Andy said he'd had a look at it and made a few changes to fix a few things that I'd done incorrectly and asked if I wanted to keep tinkering with it or should he roll his changes into the fgfs cvs? I said to him that I'd be happy to go with his changes as they'll be more realistic/accurate than the stuff I've done. I've certainly no problem with anyone doing anything with any of the stuff I've done, so long as it's an improvement :)
2002-12-18 02:32:08 +00:00
</panel>
<panel_2>
Lee Elliott: Here're some updates for some of the instruments, the TSR2 and the B52. The instruments are just parameterised/non-specific versions of the engine and fuel gauges. The old gauges will still be used by the a10s and the sea hawks until I get them done. There're a couple of tweaks to the tsr2 yasim config and amendments to the model file to change the angle at which the airbrakes operate, correct the direction that the nose gear retracts/extends and to rotate the main-gear carts during retraction/extention. There're also new panels, using the new instruments. The b52 yasim config has some big changes due to finding some more info i.e. wing incidence of 6 degrees, fuel capacities and aileron changes (removed from G & H versions!). It's now based on an 'F' model and I've put some comments in the yasim config about it. The b52-readme.txt includes a suggested method on getting airborne;). I've included an amended model - B52-F.3ds, which is the default in the new model file, and a couple of panels. I'm quite pleased with the b52 - the take-offs resemble the photographs I've seen and I think I've got reasonable values where I've had to guess at stuff, but the results from the yasim solver look as through the model is approaching the limits of acceptability for yasim. By this I mean that the model is probably a bit dodgy, not that the yasim solver is limited.
2003-02-06 17:32:55 +00:00
<path>Aircraft/b52/b52-mini-panel.xml</path>
Lee Elliott: Here's a B52-H that I've done and it can be distributed under the same conditions etc. as fgfs. It seems to fly ok but I'm sure it could do with a bit of adjustment - perhaps Andy R. will have a look and give it a few tweaks. It wouldn't need too much work to convert it to an -A model (different engines, taller fin etc.) and then it could be teamed up with the X15 :) I still can't get textures on the models but it occurred to me that if someone could apply blank texture maps to the models I could then fill in the blanks, as it were. I also noticed that there don't appear to be models included for the F-104, F-15 & F-16 and I think I could probably do some and animate them for fgfs if they'd be useful. Re the A10 - Andy said he'd had a look at it and made a few changes to fix a few things that I'd done incorrectly and asked if I wanted to keep tinkering with it or should he roll his changes into the fgfs cvs? I said to him that I'd be happy to go with his changes as they'll be more realistic/accurate than the stuff I've done. I've certainly no problem with anyone doing anything with any of the stuff I've done, so long as it's an improvement :)
2002-12-18 02:32:08 +00:00
</panel_2>
<hud>
<path>Huds/Default/default.xml</path>
<visibility>true</visibility>
</hud>
<model>
<path>Aircraft/b52/b52-model.xml</path>
</model>
<view>
<internal archive="y">false</internal>
<config> -->
<!-- x/y/z == right/up/back -->
<x-offset-m archive="y">-1.0</x-offset-m>
<y-offset-m archive="y">1.5</y-offset-m>
<z-offset-m archive="y">-28</z-offset-m>
</config>
</view>
Add a generic electrical system.
2003-03-01 19:26:02 +00:00
<systems>
<electrical>
<path>Aircraft/Generic/generic-electrical.xml</path>
</electrical>
</systems>
Lee Elliott: Here's a B52-H that I've done and it can be distributed under the same conditions etc. as fgfs. It seems to fly ok but I'm sure it could do with a bit of adjustment - perhaps Andy R. will have a look and give it a few tweaks. It wouldn't need too much work to convert it to an -A model (different engines, taller fin etc.) and then it could be teamed up with the X15 :) I still can't get textures on the models but it occurred to me that if someone could apply blank texture maps to the models I could then fill in the blanks, as it were. I also noticed that there don't appear to be models included for the F-104, F-15 & F-16 and I think I could probably do some and animate them for fgfs if they'd be useful. Re the A10 - Andy said he'd had a look at it and made a few changes to fix a few things that I'd done incorrectly and asked if I wanted to keep tinkering with it or should he roll his changes into the fgfs cvs? I said to him that I'd be happy to go with his changes as they'll be more realistic/accurate than the stuff I've done. I've certainly no problem with anyone doing anything with any of the stuff I've done, so long as it's an improvement :)
2002-12-18 02:32:08 +00:00
<view n="1">
<config>
<!-- big plane, so extend chase view offset a bit -->
<z-offset-m type="double" archive="y">-100.0</z-offset-m>
</config>
</view>
</sim>
Lee Elliott: Here're some updates for some of the instruments, the TSR2 and the B52. The instruments are just parameterised/non-specific versions of the engine and fuel gauges. The old gauges will still be used by the a10s and the sea hawks until I get them done. There're a couple of tweaks to the tsr2 yasim config and amendments to the model file to change the angle at which the airbrakes operate, correct the direction that the nose gear retracts/extends and to rotate the main-gear carts during retraction/extention. There're also new panels, using the new instruments. The b52 yasim config has some big changes due to finding some more info i.e. wing incidence of 6 degrees, fuel capacities and aileron changes (removed from G & H versions!). It's now based on an 'F' model and I've put some comments in the yasim config about it. The b52-readme.txt includes a suggested method on getting airborne;). I've included an amended model - B52-F.3ds, which is the default in the new model file, and a couple of panels. I'm quite pleased with the b52 - the take-offs resemble the photographs I've seen and I think I've got reasonable values where I've had to guess at stuff, but the results from the yasim solver look as through the model is approaching the limits of acceptability for yasim. By this I mean that the model is probably a bit dodgy, not that the yasim solver is limited.
2003-02-06 17:32:55 +00:00
<controls>
<elevator-trim type="float">-0.14</elevator-trim>
</controls>
Lee Elliott: Here's a B52-H that I've done and it can be distributed under the same conditions etc. as fgfs. It seems to fly ok but I'm sure it could do with a bit of adjustment - perhaps Andy R. will have a look and give it a few tweaks. It wouldn't need too much work to convert it to an -A model (different engines, taller fin etc.) and then it could be teamed up with the X15 :) I still can't get textures on the models but it occurred to me that if someone could apply blank texture maps to the models I could then fill in the blanks, as it were. I also noticed that there don't appear to be models included for the F-104, F-15 & F-16 and I think I could probably do some and animate them for fgfs if they'd be useful. Re the A10 - Andy said he'd had a look at it and made a few changes to fix a few things that I'd done incorrectly and asked if I wanted to keep tinkering with it or should he roll his changes into the fgfs cvs? I said to him that I'd be happy to go with his changes as they'll be more realistic/accurate than the stuff I've done. I've certainly no problem with anyone doing anything with any of the stuff I've done, so long as it's an improvement :)
2002-12-18 02:32:08 +00:00
<autopilot>
<config>
Lee Elliott: Here're some updates for some of the instruments, the TSR2 and the B52. The instruments are just parameterised/non-specific versions of the engine and fuel gauges. The old gauges will still be used by the a10s and the sea hawks until I get them done. There're a couple of tweaks to the tsr2 yasim config and amendments to the model file to change the angle at which the airbrakes operate, correct the direction that the nose gear retracts/extends and to rotate the main-gear carts during retraction/extention. There're also new panels, using the new instruments. The b52 yasim config has some big changes due to finding some more info i.e. wing incidence of 6 degrees, fuel capacities and aileron changes (removed from G & H versions!). It's now based on an 'F' model and I've put some comments in the yasim config about it. The b52-readme.txt includes a suggested method on getting airborne;). I've included an amended model - B52-F.3ds, which is the default in the new model file, and a couple of panels. I'm quite pleased with the b52 - the take-offs resemble the photographs I've seen and I think I've got reasonable values where I've had to guess at stuff, but the results from the yasim solver look as through the model is approaching the limits of acceptability for yasim. By this I mean that the model is probably a bit dodgy, not that the yasim solver is limited.
2003-02-06 17:32:55 +00:00
<min-climb-speed-kt type="float">110.0</min-climb-speed-kt>
Lee Elliott: Here's a B52-H that I've done and it can be distributed under the same conditions etc. as fgfs. It seems to fly ok but I'm sure it could do with a bit of adjustment - perhaps Andy R. will have a look and give it a few tweaks. It wouldn't need too much work to convert it to an -A model (different engines, taller fin etc.) and then it could be teamed up with the X15 :) I still can't get textures on the models but it occurred to me that if someone could apply blank texture maps to the models I could then fill in the blanks, as it were. I also noticed that there don't appear to be models included for the F-104, F-15 & F-16 and I think I could probably do some and animate them for fgfs if they'd be useful. Re the A10 - Andy said he'd had a look at it and made a few changes to fix a few things that I'd done incorrectly and asked if I wanted to keep tinkering with it or should he roll his changes into the fgfs cvs? I said to him that I'd be happy to go with his changes as they'll be more realistic/accurate than the stuff I've done. I've certainly no problem with anyone doing anything with any of the stuff I've done, so long as it's an improvement :)
2002-12-18 02:32:08 +00:00
<best-climb-speed-kt type="float">450.0</best-climb-speed-kt>
Lee Elliott: Here're some updates for some of the instruments, the TSR2 and the B52. The instruments are just parameterised/non-specific versions of the engine and fuel gauges. The old gauges will still be used by the a10s and the sea hawks until I get them done. There're a couple of tweaks to the tsr2 yasim config and amendments to the model file to change the angle at which the airbrakes operate, correct the direction that the nose gear retracts/extends and to rotate the main-gear carts during retraction/extention. There're also new panels, using the new instruments. The b52 yasim config has some big changes due to finding some more info i.e. wing incidence of 6 degrees, fuel capacities and aileron changes (removed from G & H versions!). It's now based on an 'F' model and I've put some comments in the yasim config about it. The b52-readme.txt includes a suggested method on getting airborne;). I've included an amended model - B52-F.3ds, which is the default in the new model file, and a couple of panels. I'm quite pleased with the b52 - the take-offs resemble the photographs I've seen and I think I've got reasonable values where I've had to guess at stuff, but the results from the yasim solver look as through the model is approaching the limits of acceptability for yasim. By this I mean that the model is probably a bit dodgy, not that the yasim solver is limited.
2003-02-06 17:32:55 +00:00
<target-climb-rate-fpm type="float">3000.0</target-climb-rate-fpm>
Lee Elliott: Here's a B52-H that I've done and it can be distributed under the same conditions etc. as fgfs. It seems to fly ok but I'm sure it could do with a bit of adjustment - perhaps Andy R. will have a look and give it a few tweaks. It wouldn't need too much work to convert it to an -A model (different engines, taller fin etc.) and then it could be teamed up with the X15 :) I still can't get textures on the models but it occurred to me that if someone could apply blank texture maps to the models I could then fill in the blanks, as it were. I also noticed that there don't appear to be models included for the F-104, F-15 & F-16 and I think I could probably do some and animate them for fgfs if they'd be useful. Re the A10 - Andy said he'd had a look at it and made a few changes to fix a few things that I'd done incorrectly and asked if I wanted to keep tinkering with it or should he roll his changes into the fgfs cvs? I said to him that I'd be happy to go with his changes as they'll be more realistic/accurate than the stuff I've done. I've certainly no problem with anyone doing anything with any of the stuff I've done, so long as it's an improvement :)
2002-12-18 02:32:08 +00:00
<target-descent-rate-fpm type="float">4000.0</target-descent-rate-fpm>
Lee Elliott: Here're some updates for some of the instruments, the TSR2 and the B52. The instruments are just parameterised/non-specific versions of the engine and fuel gauges. The old gauges will still be used by the a10s and the sea hawks until I get them done. There're a couple of tweaks to the tsr2 yasim config and amendments to the model file to change the angle at which the airbrakes operate, correct the direction that the nose gear retracts/extends and to rotate the main-gear carts during retraction/extention. There're also new panels, using the new instruments. The b52 yasim config has some big changes due to finding some more info i.e. wing incidence of 6 degrees, fuel capacities and aileron changes (removed from G & H versions!). It's now based on an 'F' model and I've put some comments in the yasim config about it. The b52-readme.txt includes a suggested method on getting airborne;). I've included an amended model - B52-F.3ds, which is the default in the new model file, and a couple of panels. I'm quite pleased with the b52 - the take-offs resemble the photographs I've seen and I think I've got reasonable values where I've had to guess at stuff, but the results from the yasim solver look as through the model is approaching the limits of acceptability for yasim. By this I mean that the model is probably a bit dodgy, not that the yasim solver is limited.
2003-02-06 17:32:55 +00:00
<elevator-adj-factor type="float">1600.0</elevator-adj-factor>
Lee Elliott: Here's a B52-H that I've done and it can be distributed under the same conditions etc. as fgfs. It seems to fly ok but I'm sure it could do with a bit of adjustment - perhaps Andy R. will have a look and give it a few tweaks. It wouldn't need too much work to convert it to an -A model (different engines, taller fin etc.) and then it could be teamed up with the X15 :) I still can't get textures on the models but it occurred to me that if someone could apply blank texture maps to the models I could then fill in the blanks, as it were. I also noticed that there don't appear to be models included for the F-104, F-15 & F-16 and I think I could probably do some and animate them for fgfs if they'd be useful. Re the A10 - Andy said he'd had a look at it and made a few changes to fix a few things that I'd done incorrectly and asked if I wanted to keep tinkering with it or should he roll his changes into the fgfs cvs? I said to him that I'd be happy to go with his changes as they'll be more realistic/accurate than the stuff I've done. I've certainly no problem with anyone doing anything with any of the stuff I've done, so long as it's an improvement :)
2002-12-18 02:32:08 +00:00
<integral-contribution type="float">0.005</integral-contribution>
Lee Elliott: Here're some updates for some of the instruments, the TSR2 and the B52. The instruments are just parameterised/non-specific versions of the engine and fuel gauges. The old gauges will still be used by the a10s and the sea hawks until I get them done. There're a couple of tweaks to the tsr2 yasim config and amendments to the model file to change the angle at which the airbrakes operate, correct the direction that the nose gear retracts/extends and to rotate the main-gear carts during retraction/extention. There're also new panels, using the new instruments. The b52 yasim config has some big changes due to finding some more info i.e. wing incidence of 6 degrees, fuel capacities and aileron changes (removed from G & H versions!). It's now based on an 'F' model and I've put some comments in the yasim config about it. The b52-readme.txt includes a suggested method on getting airborne;). I've included an amended model - B52-F.3ds, which is the default in the new model file, and a couple of panels. I'm quite pleased with the b52 - the take-offs resemble the photographs I've seen and I think I've got reasonable values where I've had to guess at stuff, but the results from the yasim solver look as through the model is approaching the limits of acceptability for yasim. By this I mean that the model is probably a bit dodgy, not that the yasim solver is limited.
2003-02-06 17:32:55 +00:00
<max-aileron type="float">1.0</max-aileron>
<max-roll-deg type="float">40.0</max-roll-deg>
Lee Elliott: Here's a B52-H that I've done and it can be distributed under the same conditions etc. as fgfs. It seems to fly ok but I'm sure it could do with a bit of adjustment - perhaps Andy R. will have a look and give it a few tweaks. It wouldn't need too much work to convert it to an -A model (different engines, taller fin etc.) and then it could be teamed up with the X15 :) I still can't get textures on the models but it occurred to me that if someone could apply blank texture maps to the models I could then fill in the blanks, as it were. I also noticed that there don't appear to be models included for the F-104, F-15 & F-16 and I think I could probably do some and animate them for fgfs if they'd be useful. Re the A10 - Andy said he'd had a look at it and made a few changes to fix a few things that I'd done incorrectly and asked if I wanted to keep tinkering with it or should he roll his changes into the fgfs cvs? I said to him that I'd be happy to go with his changes as they'll be more realistic/accurate than the stuff I've done. I've certainly no problem with anyone doing anything with any of the stuff I've done, so long as it's an improvement :)
2002-12-18 02:32:08 +00:00
Lee Elliott: Here're some updates for some of the instruments, the TSR2 and the B52. The instruments are just parameterised/non-specific versions of the engine and fuel gauges. The old gauges will still be used by the a10s and the sea hawks until I get them done. There're a couple of tweaks to the tsr2 yasim config and amendments to the model file to change the angle at which the airbrakes operate, correct the direction that the nose gear retracts/extends and to rotate the main-gear carts during retraction/extention. There're also new panels, using the new instruments. The b52 yasim config has some big changes due to finding some more info i.e. wing incidence of 6 degrees, fuel capacities and aileron changes (removed from G & H versions!). It's now based on an 'F' model and I've put some comments in the yasim config about it. The b52-readme.txt includes a suggested method on getting airborne;). I've included an amended model - B52-F.3ds, which is the default in the new model file, and a couple of panels. I'm quite pleased with the b52 - the take-offs resemble the photographs I've seen and I think I've got reasonable values where I've had to guess at stuff, but the results from the yasim solver look as through the model is approaching the limits of acceptability for yasim. By this I mean that the model is probably a bit dodgy, not that the yasim solver is limited.
2003-02-06 17:32:55 +00:00
<roll-out-deg type="float">18.0</roll-out-deg>
Lee Elliott: Here's a B52-H that I've done and it can be distributed under the same conditions etc. as fgfs. It seems to fly ok but I'm sure it could do with a bit of adjustment - perhaps Andy R. will have a look and give it a few tweaks. It wouldn't need too much work to convert it to an -A model (different engines, taller fin etc.) and then it could be teamed up with the X15 :) I still can't get textures on the models but it occurred to me that if someone could apply blank texture maps to the models I could then fill in the blanks, as it were. I also noticed that there don't appear to be models included for the F-104, F-15 & F-16 and I think I could probably do some and animate them for fgfs if they'd be useful. Re the A10 - Andy said he'd had a look at it and made a few changes to fix a few things that I'd done incorrectly and asked if I wanted to keep tinkering with it or should he roll his changes into the fgfs cvs? I said to him that I'd be happy to go with his changes as they'll be more realistic/accurate than the stuff I've done. I've certainly no problem with anyone doing anything with any of the stuff I've done, so long as it's an improvement :)
2002-12-18 02:32:08 +00:00
<roll-out-smooth-deg type="float">20.0</roll-out-smooth-deg>
<zero-pitch-throttle type="float">0.5</zero-pitch-throttle>
<zero-pitch-trim-full-throttle type="float">0.001</zero-pitch-trim-full-throttle>
</config>
</autopilot>
</PropertyList>
Copy permalink