fly/fgdata
1
0
Fork 0
Code Activity
fgdata/Aircraft/Instruments-3d/asi-pa24/asi.ac

327 lines
4.2 KiB
Text
Raw Normal View History

Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
AC3Db
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
MATERIAL "ac3dmat1" rgb 1 1 1 amb 0.2 0.2 0.2 emis 0 0 0 spec 0 0 0 shi 10 trans 0
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
MATERIAL "DefaultWhite" rgb 1 1 1 amb 1 1 1 emis 0.15 0.15 0.15 spec 0.5 0.5 0.5 shi 64 trans 0
Dave Perry: Over Christmas week, I did a significant update to the pa24. 1. made interior 3d with wall thickness variation to match real geometry.. 2. added cabin door and baggage door automation. 3. moved the instrument panel to the "right" x and z location. 4. replaced all the pa24-panel.xml automations with pick automations so that file can be removed from cvs. 5. mixture, throttle, prop control automations that were in pa24-panel.xml now done with mouse wheel. 6. flapTrim.ac better matches real geometry and added picks. 7. glareshield better matches real geometry (now has correct width). 8. kr87 (adf) panel animation replaced with pick animation as in pa28. The Instruments-3d patch adds picks for the asi-pa24 and makes minor tweaks to the pa24 and pa28 fuel-oil-amps gauges.
2009-12-29 10:46:34 +00:00
MATERIAL "ac3dmat1" rgb 1 1 1 amb 1 1 1 emis 0 0 0 spec 0 0 0 shi 0 trans 0.937
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
OBJECT world
Dave Perry: Over Christmas week, I did a significant update to the pa24. 1. made interior 3d with wall thickness variation to match real geometry.. 2. added cabin door and baggage door automation. 3. moved the instrument panel to the "right" x and z location. 4. replaced all the pa24-panel.xml automations with pick automations so that file can be removed from cvs. 5. mixture, throttle, prop control automations that were in pa24-panel.xml now done with mouse wheel. 6. flapTrim.ac better matches real geometry and added picks. 7. glareshield better matches real geometry (now has correct width). 8. kr87 (adf) panel animation replaced with pick animation as in pa28. The Instruments-3d patch adds picks for the asi-pa24 and makes minor tweaks to the pa24 and pa28 fuel-oil-amps gauges.
2009-12-29 10:46:34 +00:00
kids 6
OBJECT poly
name "PAincrease"
loc 0 -0.03386 -0.0573866
crease 45.000000
numvert 4
0.004974 0.00857798 0.0235894
0.004974 0.00857798 0.0319417
0.004974 -0.00722356 0.0319417
0.004974 -0.00722356 0.0235894
numsurf 1
SURF 0x30
mat 2
refs 4
0 1 1
1 0 1
2 0 0
3 1 0
kids 0
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
OBJECT poly
name "Ring"
loc -0.000692841 8.67061e-07 0.000126443
Dave Perry: Over Christmas week, I did a significant update to the pa24. 1. made interior 3d with wall thickness variation to match real geometry.. 2. added cabin door and baggage door automation. 3. moved the instrument panel to the "right" x and z location. 4. replaced all the pa24-panel.xml automations with pick automations so that file can be removed from cvs. 5. mixture, throttle, prop control automations that were in pa24-panel.xml now done with mouse wheel. 6. flapTrim.ac better matches real geometry and added picks. 7. glareshield better matches real geometry (now has correct width). 8. kr87 (adf) panel animation replaced with pick animation as in pa28. The Instruments-3d patch adds picks for the asi-pa24 and makes minor tweaks to the pa24 and pa28 fuel-oil-amps gauges.
2009-12-29 10:46:34 +00:00
texture "ASI_ring.rgb"
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
crease 45.000000
numvert 4
0 0.0400001 0.0400001
0 -0.0400001 0.0400001
0 -0.0400001 -0.0400001
0 0.0400001 -0.0400001
numsurf 1
SURF 0x0
mat 1
refs 4
3 0.9375 0.939453
0 0.046875 0.939453
1 0.046875 0.0488281
2 0.9375 0.0488281
kids 0
OBJECT poly
name "Face"
Dave Perry: Over Christmas week, I did a significant update to the pa24. 1. made interior 3d with wall thickness variation to match real geometry.. 2. added cabin door and baggage door automation. 3. moved the instrument panel to the "right" x and z location. 4. replaced all the pa24-panel.xml automations with pick automations so that file can be removed from cvs. 5. mixture, throttle, prop control automations that were in pa24-panel.xml now done with mouse wheel. 6. flapTrim.ac better matches real geometry and added picks. 7. glareshield better matches real geometry (now has correct width). 8. kr87 (adf) panel animation replaced with pick animation as in pa28. The Instruments-3d patch adds picks for the asi-pa24 and makes minor tweaks to the pa24 and pa28 fuel-oil-amps gauges.
2009-12-29 10:46:34 +00:00
texture "ASI_face.rgb"
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
crease 45.000000
numvert 4
0 0.04 -0.04
0 -0.04 -0.04
0 -0.04 0.04
0 0.04 0.04
numsurf 1
SURF 0x0
mat 1
refs 4
0 0.941406 0.941406
3 0.0507812 0.941406
2 0.0507812 0.0507812
1 0.941406 0.0507812
kids 0
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
OBJECT poly
name "Needle"
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
loc 0.002501 4.29614e-05 5.02175e-05
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
crease 45.000000
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
numvert 9
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
0 0.0159379 -0.001537
0 -0.00812565 -0.001537
0 -0.00812565 0.001537
0 0.0159379 0.001537
0 0.0199994 0.000726
0 0.0199994 -0.000725999
0 0.0309357 -0.000726
0 0.0309357 0.000726
0 0.0343731 3.74712e-10
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
numsurf 5
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
SURF 0x0
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
mat 1
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
refs 4
0 0 0
3 0 0
2 0 0
1 0 0
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
SURF 0x0
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
mat 1
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
refs 4
3 0 0
0 0 0
5 0 0
4 0 0
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
SURF 0x0
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
mat 1
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
refs 3
5 0 0
6 0 0
8 0 0
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
SURF 0x0
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
mat 1
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
refs 3
8 0 0
7 0 0
4 0 0
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
SURF 0x0
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
mat 1
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
refs 3
8 0 0
4 0 0
5 0 0
kids 0
OBJECT poly
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
name "PA-Knob"
loc 0 -0.0335478 -0.0247612
Dave Perry: Over Christmas week, I did a significant update to the pa24. 1. made interior 3d with wall thickness variation to match real geometry.. 2. added cabin door and baggage door automation. 3. moved the instrument panel to the "right" x and z location. 4. replaced all the pa24-panel.xml automations with pick automations so that file can be removed from cvs. 5. mixture, throttle, prop control automations that were in pa24-panel.xml now done with mouse wheel. 6. flapTrim.ac better matches real geometry and added picks. 7. glareshield better matches real geometry (now has correct width). 8. kr87 (adf) panel animation replaced with pick animation as in pa28. The Instruments-3d patch adds picks for the asi-pa24 and makes minor tweaks to the pa24 and pa28 fuel-oil-amps gauges.
2009-12-29 10:46:34 +00:00
texture "knob.rgb"
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
crease 101.000000
numvert 20
0.01 1.49012e-08 0
0 0 0
0 -0.00396058 0.00479285
0 -0.00606796 0.00108645
0 -0.00533607 -0.00312831
0 -0.00210738 -0.0058793
0 0.00210739 -0.0058793
0 0.00533608 -0.00312831
0 0.00606796 0.00108645
0 0.00396058 0.00479285
0 0 0.00625662
0.01 -0.00396058 0.00479285
0.01 1.49012e-08 0.00625662
0.01 -0.00606796 0.00108645
0.01 -0.00533607 -0.00312831
0.01 -0.00210737 -0.0058793
0.01 0.00210739 -0.0058793
0.01 0.00533608 -0.00312831
0.01 0.00606797 0.00108645
0.01 0.00396059 0.00479285
numsurf 27
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
10 1 0.5
2 0.879385 0.173648
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
2 0.879385 0.173648
3 0.573978 0
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
3 0.573978 0
4 0.226682 0.0603074
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
4 0.226682 0.0603074
5 0 0.326352
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
5 0 0.326352
6 0 0.673648
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
6 0 0.673648
7 0.226682 0.939693
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
7 0.226682 0.939693
8 0.573978 1
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
8 0.573978 1
9 0.879385 0.826352
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
9 0.879385 0.826352
10 1 0.5
SURF 0x10
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
mat 0
refs 4
Dave Perry: I did some more work on the pa24-250 over the holidays. 1. Used nasal to emulate egt performance very similar to the real AC. 2. Changed the airspeed so the pressure altitude/temperature correction ring for true airspeed works. 3. Modeled the OAT after the battery powered OAT in the real AC. one left click on the "hot spot" displays OAT in C 2nd left click displacs OAT in F 3rd left click is off times out after 5 min and turns off (to save battery) 4. Other 3d clean-up
2007-01-10 16:10:48 +00:00
11 0 0
12 0 0
10 0 0
2 0 0
SURF 0x10
mat 0
refs 4
13 0 0
11 0 0
2 0 0
3 0 0
SURF 0x10
mat 0
refs 4
14 0 0
13 0 0
3 0 0
4 0 0
SURF 0x10
mat 0
refs 4
15 0 0
14 0 0
4 0 0
5 0 0
SURF 0x10
mat 0
refs 4
16 0 0
15 0 0
5 0 0
6 0 0
SURF 0x10
mat 0
refs 4
17 0 0
16 0 0
6 0 0
7 0 0
SURF 0x10
mat 0
refs 4
18 0 0
17 0 0
7 0 0
8 0 0
SURF 0x10
mat 0
refs 4
19 0 0
18 0 0
8 0 0
9 0 0
SURF 0x10
mat 0
refs 4
12 0 0
19 0 0
9 0 0
10 0 0
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
12 1 0.5
11 0.879385 0.173648
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
11 0.879385 0.173648
13 0.573978 0
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
13 0.573978 0
14 0.226682 0.0603074
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
14 0.226682 0.0603074
15 0 0.326352
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
15 0 0.326352
16 0 0.673648
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
16 0 0.673648
17 0.226682 0.939693
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
17 0.226682 0.939693
18 0.573978 1
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
18 0.573978 1
19 0.879385 0.826352
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
19 0.879385 0.826352
12 1 0.5
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
kids 0
Dave Perry: Over Christmas week, I did a significant update to the pa24. 1. made interior 3d with wall thickness variation to match real geometry.. 2. added cabin door and baggage door automation. 3. moved the instrument panel to the "right" x and z location. 4. replaced all the pa24-panel.xml automations with pick automations so that file can be removed from cvs. 5. mixture, throttle, prop control automations that were in pa24-panel.xml now done with mouse wheel. 6. flapTrim.ac better matches real geometry and added picks. 7. glareshield better matches real geometry (now has correct width). 8. kr87 (adf) panel animation replaced with pick animation as in pa28. The Instruments-3d patch adds picks for the asi-pa24 and makes minor tweaks to the pa24 and pa28 fuel-oil-amps gauges.
2009-12-29 10:46:34 +00:00
OBJECT poly
name "PAdecrease"
loc 0 -0.03386 -0.0481314
crease 45.000000
numvert 4
0.004974 -0.00722356 0.0235894
0.004974 -0.00722356 0.0319417
0.004974 0.00857798 0.0319417
0.004974 0.00857798 0.0235894
numsurf 1
SURF 0x30
mat 2
refs 4
3 1 1
2 0 1
1 0 0
0 1 0
kids 0
Copy permalink