fly/fgdata
1
0
Fork 0
Code Activity
fgdata/Aircraft/Instruments-3d/hi/hi.ac

487 lines
6 KiB
Text
Raw Normal View History

Start on some basic 3D panel instruments. For now, just reuse textures that are already sitting around for the 2D panel. Many of the instruments are not yet functional.
2004-02-15 01:03:07 +00:00
AC3Db
Update from Dave Perry: 1. Added a pilot. 2. Cleaned up the panel, added a working park brake lever, added the remaining placards, added "materials lighting for the remaining switches and knobs tied to the nave light switch. 3. Doubled the resolution of the transparent rgb, added propdisc spin, and realigned all in the ac file so the spin was concentric.
2006-03-24 03:52:14 +00:00
MATERIAL "ac3dmat1" rgb 1 1 1 amb 0.2 0.2 0.2 emis 0 0 0 spec 0 0 0 shi 10 trans 0
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
MATERIAL "DefaultWhite" rgb 1 1 1 amb 1 1 1 emis 0.15 0.15 0.15 spec 0.5 0.5 0.5 shi 64 trans 0
Start on some basic 3D panel instruments. For now, just reuse textures that are already sitting around for the 2D panel. Many of the instruments are not yet functional.
2004-02-15 01:03:07 +00:00
OBJECT world
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
kids 5
Start on some basic 3D panel instruments. For now, just reuse textures that are already sitting around for the 2D panel. Many of the instruments are not yet functional.
2004-02-15 01:03:07 +00:00
OBJECT poly
name "Face"
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
loc 0.000119331 0 0
texture "hi01.rgb"
crease 45.000000
Make instrument slightly emissive, for night flight. Add front markings.
2004-02-18 02:36:54 +00:00
numvert 6
-0.001458 0.04 -0.04
-0.001458 -0.04 -0.04
-0.001458 -0.04 0.04
-0.001458 0.04 0.04
-0.001458 0 0.04
-0.001458 0 -0.04
numsurf 2
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
SURF 0x0
mat 1
Make instrument slightly emissive, for night flight. Add front markings.
2004-02-18 02:36:54 +00:00
refs 4
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
0 0.935547 0.935547
3 0.0566406 0.935547
4 0.0566406 0.496094
5 0.935547 0.496094
SURF 0x0
mat 1
Make instrument slightly emissive, for night flight. Add front markings.
2004-02-18 02:36:54 +00:00
refs 4
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
4 0.0566406 0.496094
2 0.0566406 0.0566406
1 0.935547 0.0566406
5 0.935547 0.496094
Make instrument slightly emissive, for night flight. Add front markings.
2004-02-18 02:36:54 +00:00
kids 0
OBJECT poly
name "Front"
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
texture "hi02.rgb"
crease 45.000000
Start on some basic 3D panel instruments. For now, just reuse textures that are already sitting around for the 2D panel. Many of the instruments are not yet functional.
2004-02-15 01:03:07 +00:00
numvert 6
0 0.04 -0.04
0 -0.04 -0.04
0 -0.04 0.04
0 0.04 0.04
0 0 0.04
0 0 -0.04
numsurf 2
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
SURF 0x0
mat 1
refs 4
0 0.994141 0.994141
3 -0.00195312 0.994141
4 -0.00195312 0.496094
5 0.994141 0.496094
SURF 0x0
mat 1
refs 4
4 -0.00195312 0.496094
2 -0.00195312 -0.00195312
1 0.994141 -0.00195312
5 0.994141 0.496094
kids 0
OBJECT poly
name "OBS-Knob"
loc 0 -0.0297401 0.0293165
Update from Dave Perry: 1. Added a pilot. 2. Cleaned up the panel, added a working park brake lever, added the remaining placards, added "materials lighting for the remaining switches and knobs tied to the nave light switch. 3. Doubled the resolution of the transparent rgb, added propdisc spin, and realigned all in the ac file so the spin was concentric.
2006-03-24 03:52:14 +00:00
texture "knob.rgb"
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
crease 101.000000
numvert 20
0.01 9.31323e-09 0
0 0 0
0 -0.00396058 0.00479285
0 -0.00606796 0.00108645
0 -0.00533607 -0.00312831
0 -0.00210738 -0.0058793
0 0.00210739 -0.0058793
0 0.00533608 -0.00312831
0 0.00606796 0.00108645
0 0.00396058 0.00479285
0 0 0.00625662
0.01 -0.00396058 0.00479285
0.01 9.31323e-09 0.00625662
0.01 -0.00606796 0.00108645
0.01 -0.00533607 -0.00312831
0.01 -0.00210737 -0.0058793
0.01 0.00210739 -0.0058793
0.01 0.00533608 -0.00312831
0.01 0.00606797 0.00108645
0.01 0.00396059 0.00479285
numsurf 27
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
10 1 0.5
2 0.879385 0.173648
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
2 0.879385 0.173648
3 0.573978 0
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
3 0.573978 0
4 0.226682 0.0603074
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
4 0.226682 0.0603074
5 0 0.326352
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
5 0 0.326352
6 0 0.673648
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
6 0 0.673648
7 0.226682 0.939693
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
7 0.226682 0.939693
8 0.573978 1
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
8 0.573978 1
9 0.879385 0.826352
SURF 0x10
mat 0
refs 3
1 0.484454 0.5
9 0.879385 0.826352
10 1 0.5
SURF 0x10
mat 0
refs 4
11 0 0
12 0 0
10 0 0
2 0 0
SURF 0x10
mat 0
refs 4
13 0 0
11 0 0
2 0 0
3 0 0
SURF 0x10
mat 0
refs 4
14 0 0
13 0 0
3 0 0
4 0 0
SURF 0x10
mat 0
refs 4
15 0 0
14 0 0
4 0 0
5 0 0
SURF 0x10
mat 0
refs 4
16 0 0
15 0 0
5 0 0
6 0 0
SURF 0x10
mat 0
refs 4
17 0 0
16 0 0
6 0 0
7 0 0
SURF 0x10
mat 0
refs 4
18 0 0
17 0 0
7 0 0
8 0 0
SURF 0x10
mat 0
refs 4
19 0 0
18 0 0
8 0 0
9 0 0
SURF 0x10
mat 0
refs 4
12 0 0
19 0 0
9 0 0
10 0 0
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
12 1 0.5
11 0.879385 0.173648
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
11 0.879385 0.173648
13 0.573978 0
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
13 0.573978 0
14 0.226682 0.0603074
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
14 0.226682 0.0603074
15 0 0.326352
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
15 0 0.326352
16 0 0.673648
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
16 0 0.673648
17 0.226682 0.939693
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
17 0.226682 0.939693
18 0.573978 1
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
18 0.573978 1
19 0.879385 0.826352
SURF 0x10
mat 0
refs 3
0 0.484454 0.5
19 0.879385 0.826352
12 1 0.5
kids 0
OBJECT poly
Update from Dave Perry: 1. Added a pilot. 2. Cleaned up the panel, added a working park brake lever, added the remaining placards, added "materials lighting for the remaining switches and knobs tied to the nave light switch. 3. Doubled the resolution of the transparent rgb, added propdisc spin, and realigned all in the ac file so the spin was concentric.
2006-03-24 03:52:14 +00:00
name "Hdg-Knob"
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
loc 0 -0.0300775 -0.0298089
Update from Dave Perry: 1. Added a pilot. 2. Cleaned up the panel, added a working park brake lever, added the remaining placards, added "materials lighting for the remaining switches and knobs tied to the nave light switch. 3. Doubled the resolution of the transparent rgb, added propdisc spin, and realigned all in the ac file so the spin was concentric.
2006-03-24 03:52:14 +00:00
texture "knob.rgb"
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
crease 101.000000
numvert 20
0.01 0.00396059 0.00479285
0.01 0.00606797 0.00108645
0.01 0.00533608 -0.00312831
0.01 0.00210739 -0.0058793
0.01 -0.00210737 -0.0058793
0.01 -0.00533607 -0.00312831
0.01 -0.00606796 0.00108645
0.01 1.11759e-08 0.00625662
0.01 -0.00396058 0.00479285
0 0 0.00625662
0 0.00396058 0.00479285
0 0.00606796 0.00108645
0 0.00533608 -0.00312831
0 0.00210739 -0.0058793
0 -0.00210738 -0.0058793
0 -0.00533607 -0.00312831
0 -0.00606796 0.00108645
0 -0.00396058 0.00479285
0 0 0
0.01 1.11759e-08 0
numsurf 27
SURF 0x10
mat 0
refs 3
19 0.484454 0.5
0 0.879385 0.826352
7 1 0.5
SURF 0x10
mat 0
refs 3
19 0.484454 0.5
1 0.573978 1
0 0.879385 0.826352
SURF 0x10
mat 0
refs 3
19 0.484454 0.5
2 0.226682 0.939693
1 0.573978 1
SURF 0x10
mat 0
refs 3
19 0.484454 0.5
3 0 0.673648
2 0.226682 0.939693
SURF 0x10
mat 0
refs 3
19 0.484454 0.5
4 0 0.326352
3 0 0.673648
SURF 0x10
mat 0
refs 3
19 0.484454 0.5
5 0.226682 0.0603074
4 0 0.326352
SURF 0x10
mat 0
refs 3
19 0.484454 0.5
6 0.573978 0
5 0.226682 0.0603074
SURF 0x10
mat 0
refs 3
19 0.484454 0.5
8 0.879385 0.173648
6 0.573978 0
SURF 0x10
mat 0
refs 3
19 0.484454 0.5
7 1 0.5
8 0.879385 0.173648
SURF 0x10
mat 0
refs 4
7 0 0
0 0 0
10 0 0
9 0 0
SURF 0x10
mat 0
refs 4
0 0 0
1 0 0
11 0 0
10 0 0
SURF 0x10
Make instrument slightly emissive, for night flight. Add front markings.
2004-02-18 02:36:54 +00:00
mat 0
Start on some basic 3D panel instruments. For now, just reuse textures that are already sitting around for the 2D panel. Many of the instruments are not yet functional.
2004-02-15 01:03:07 +00:00
refs 4
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
1 0 0
2 0 0
12 0 0
11 0 0
SURF 0x10
Make instrument slightly emissive, for night flight. Add front markings.
2004-02-18 02:36:54 +00:00
mat 0
Start on some basic 3D panel instruments. For now, just reuse textures that are already sitting around for the 2D panel. Many of the instruments are not yet functional.
2004-02-15 01:03:07 +00:00
refs 4
Changes from Dave Perry: I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:34:59 +00:00
2 0 0
3 0 0
13 0 0
12 0 0
SURF 0x10
mat 0
refs 4
3 0 0
4 0 0
14 0 0
13 0 0
SURF 0x10
mat 0
refs 4
4 0 0
5 0 0
15 0 0
14 0 0
SURF 0x10
mat 0
refs 4
5 0 0
6 0 0
16 0 0
15 0 0
SURF 0x10
mat 0
refs 4
6 0 0
8 0 0
17 0 0
16 0 0
SURF 0x10
mat 0
refs 4
8 0 0
7 0 0
9 0 0
17 0 0
SURF 0x10
mat 0
refs 3
18 0.484454 0.5
10 0.879385 0.826352
9 1 0.5
SURF 0x10
mat 0
refs 3
18 0.484454 0.5
11 0.573978 1
10 0.879385 0.826352
SURF 0x10
mat 0
refs 3
18 0.484454 0.5
12 0.226682 0.939693
11 0.573978 1
SURF 0x10
mat 0
refs 3
18 0.484454 0.5
13 0 0.673648
12 0.226682 0.939693
SURF 0x10
mat 0
refs 3
18 0.484454 0.5
14 0 0.326352
13 0 0.673648
SURF 0x10
mat 0
refs 3
18 0.484454 0.5
15 0.226682 0.0603074
14 0 0.326352
SURF 0x10
mat 0
refs 3
18 0.484454 0.5
16 0.573978 0
15 0.226682 0.0603074
SURF 0x10
mat 0
refs 3
18 0.484454 0.5
17 0.879385 0.173648
16 0.573978 0
SURF 0x10
mat 0
refs 3
18 0.484454 0.5
9 1 0.5
17 0.879385 0.173648
kids 0
OBJECT poly
name "HdgBug"
loc 0.00155131 0 0
texture "hi03.rgb"
crease 45.000000
numvert 6
-0.0011 0 -0.04
-0.0011 0 0.04
-0.0011 0.04 0.04
-0.0011 -0.04 0.04
-0.0011 -0.04 -0.04
-0.0011 0.04 -0.04
numsurf 2
SURF 0x0
mat 1
refs 4
1 0.0520455 0.498392
3 0.0520455 0.0589381
4 0.930952 0.0589381
0 0.930952 0.498392
SURF 0x0
mat 1
refs 4
5 0.930952 0.937845
2 0.0520455 0.937845
1 0.0520455 0.498392
0 0.930952 0.498392
Start on some basic 3D panel instruments. For now, just reuse textures that are already sitting around for the 2D panel. Many of the instruments are not yet functional.
2004-02-15 01:03:07 +00:00
kids 0
Copy permalink