fly/fgdata
1
0
Fork 0
Code Activity
fgdata/mice.xml

321 lines
8.5 KiB
XML
Raw Normal View History

Initial mouse configuration support. This will be ignored unless you configure --with-new-mouse, and there's not much there yet anyway.
2002-03-23 22:30:39 +00:00
<?xml version="1.0"?>
Added configuration for different modes and cursors. The XML format is subject to change, and this file is still used only when FlightGear is configured --with-new-mouse.
2002-03-25 11:59:26 +00:00
<!--
Mouse binding definitions.
Remove fragile alias references in bindings and replace with property references.
2004-06-24 14:45:48 +00:00
This is a independent configuration file: it is not part of the main
FlightGear property tree.
Added configuration for different modes and cursors. The XML format is subject to change, and this file is still used only when FlightGear is configured --with-new-mouse.
2002-03-25 11:59:26 +00:00
Currently, Glut supports only one mouse, but the configuration format
Remove fragile alias references in bindings and replace with property references.
2004-06-24 14:45:48 +00:00
is designed to support additional mice in the future if possible. The
current mode for each mouse is held in the
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
/devices/status/mice/mouse[n]/mode property.
Added configuration for different modes and cursors. The XML format is subject to change, and this file is still used only when FlightGear is configured --with-new-mouse.
2002-03-25 11:59:26 +00:00
-->
Initial mouse configuration support. This will be ignored unless you configure --with-new-mouse, and there's not much there yet anyway.
2002-03-23 22:30:39 +00:00
<PropertyList>
Added configuration for different modes and cursors. The XML format is subject to change, and this file is still used only when FlightGear is configured --with-new-mouse.
2002-03-25 11:59:26 +00:00
<mouse n="0">
<mode-count type="int">3</mode-count>
<mode archive="y" type="int">0</mode>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
<mode n="0">
<cursor>inherit</cursor>
Add explicit types for all non-string properties. This will help a lot, since otherwise a property that is never set or tied by FlightGear itself will always be kept as a string and converted on each access. That's why fgGetBool and friends could take up a lot of processor time sometimes.
2002-04-09 10:45:47 +00:00
<constrained type="bool">false</constrained>
<pass-through type="bool">true</pass-through>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
<button n="2">
<binding>
<command>property-assign</command>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<property>/devices/status/mice/mouse[0]/mode</property>
Add explicit types for all non-string properties. This will help a lot, since otherwise a property that is never set or tied by FlightGear itself will always be kept as a string and converted on each access. That's why fgGetBool and friends could take up a lot of processor time sometimes.
2002-04-09 10:45:47 +00:00
<value type="int">1</value>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
</binding>
</button>
Assign buttons 3 and 4 to elevator trim. Under X11, at least, these will map to the mouse wheel if it's enabled.
2002-05-02 14:08:26 +00:00
<!-- extra buttons control elevator trim -->
<!-- these are often assigned to mouse-wheel motion in Linux -->
<button n="3">
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/elevator-trim</property>
Make the mouse wheel less sensitive for elevator trim.
2002-07-04 15:45:08 +00:00
<step type="double">0.002</step>
Assign buttons 3 and 4 to elevator trim. Under X11, at least, these will map to the mouse wheel if it's enabled.
2002-05-02 14:08:26 +00:00
</binding>
</button>
<button n="4">
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/elevator-trim</property>
Make the mouse wheel less sensitive for elevator trim.
2002-07-04 15:45:08 +00:00
<step type="double">-0.002</step>
Assign buttons 3 and 4 to elevator trim. Under X11, at least, these will map to the mouse wheel if it's enabled.
2002-05-02 14:08:26 +00:00
</binding>
</button>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
</mode>
<mode n="1">
<cursor>crosshair</cursor>
Add explicit types for all non-string properties. This will help a lot, since otherwise a property that is never set or tied by FlightGear itself will always be kept as a string and converted on each access. That's why fgGetBool and friends could take up a lot of processor time sometimes.
2002-04-09 10:45:47 +00:00
<constrained type="bool">true</constrained>
<pass-through type="bool">false</pass-through>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
<button n="2">
<binding>
<command>property-assign</command>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<property>/devices/status/mice/mouse[0]/mode</property>
Add explicit types for all non-string properties. This will help a lot, since otherwise a property that is never set or tied by FlightGear itself will always be kept as a string and converted on each access. That's why fgGetBool and friends could take up a lot of processor time sometimes.
2002-04-09 10:45:47 +00:00
<value type="int">2</value>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
</binding>
</button>
Assign buttons 3 and 4 to elevator trim. Under X11, at least, these will map to the mouse wheel if it's enabled.
2002-05-02 14:08:26 +00:00
<!-- extra buttons control elevator trim -->
<!-- these are often assigned to mouse-wheel motion in Linux -->
<button n="3">
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/elevator-trim</property>
Assign buttons 3 and 4 to elevator trim. Under X11, at least, these will map to the mouse wheel if it's enabled.
2002-05-02 14:08:26 +00:00
<step type="double">0.01</step>
</binding>
</button>
<button n="4">
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/elevator-trim</property>
Assign buttons 3 and 4 to elevator trim. Under X11, at least, these will map to the mouse wheel if it's enabled.
2002-05-02 14:08:26 +00:00
<step type="double">-0.01</step>
</binding>
</button>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<!-- Mouse left/right motion. -->
Added bindings for elevator and ailerons in mode 1, as in current mouse support.
2002-03-26 13:17:32 +00:00
<x-axis>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<!-- No buttons pressed: control ailerons -->
Added bindings for elevator and ailerons in mode 1, as in current mouse support.
2002-03-26 13:17:32 +00:00
<binding>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<condition>
<and>
<not>
<property>/devices/status/mice/mouse[0]/button[0]</property>
</not>
<not>
<property>/devices/status/mice/mouse[0]/button[1]</property>
</not>
</and>
</condition>
Added bindings for elevator and ailerons in mode 1, as in current mouse support.
2002-03-26 13:17:32 +00:00
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/aileron</property>
Add explicit types for all non-string properties. This will help a lot, since otherwise a property that is never set or tied by FlightGear itself will always be kept as a string and converted on each access. That's why fgGetBool and friends could take up a lot of processor time sometimes.
2002-04-09 10:45:47 +00:00
<factor type="double">4.0</factor>
Added bindings for elevator and ailerons in mode 1, as in current mouse support.
2002-03-26 13:17:32 +00:00
<min type="double">-1.0</min>
<max type="double">1.0</max>
<wrap type="bool">false</wrap>
</binding>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<!-- Left button pressed: control rudder -->
<binding>
<condition>
<and>
<property>/devices/status/mice/mouse[0]/button[0]</property>
<not>
<property>/devices/status/mice/mouse[0]/button[1]</property>
</not>
</and>
</condition>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/rudder</property>
Add explicit types for all non-string properties. This will help a lot, since otherwise a property that is never set or tied by FlightGear itself will always be kept as a string and converted on each access. That's why fgGetBool and friends could take up a lot of processor time sometimes.
2002-04-09 10:45:47 +00:00
<factor type="double">4.0</factor>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<min type="double">-1.0</min>
<max type="double">1.0</max>
<wrap type="bool">false</wrap>
</binding>
Added bindings for elevator and ailerons in mode 1, as in current mouse support.
2002-03-26 13:17:32 +00:00
</x-axis>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<!-- Mouse up/down motion -->
Added bindings for elevator and ailerons in mode 1, as in current mouse support.
2002-03-26 13:17:32 +00:00
<y-axis>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<!-- No buttons pressed: control elevator -->
Added bindings for elevator and ailerons in mode 1, as in current mouse support.
2002-03-26 13:17:32 +00:00
<binding>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<condition>
<and>
<not>
<property>/devices/status/mice/mouse[0]/button[0]</property>
</not>
<not>
<property>/devices/status/mice/mouse[0]/button[1]</property>
</not>
</and>
</condition>
Added bindings for elevator and ailerons in mode 1, as in current mouse support.
2002-03-26 13:17:32 +00:00
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/elevator</property>
Add explicit types for all non-string properties. This will help a lot, since otherwise a property that is never set or tied by FlightGear itself will always be kept as a string and converted on each access. That's why fgGetBool and friends could take up a lot of processor time sometimes.
2002-04-09 10:45:47 +00:00
<factor type="double">-4.0</factor>
Added bindings for elevator and ailerons in mode 1, as in current mouse support.
2002-03-26 13:17:32 +00:00
<min type="double">-1.0</min>
<max type="double">1.0</max>
<wrap type="bool">false</wrap>
</binding>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<!-- Middle button pressed: control throttle -->
<binding>
New Nasal code, with lots of input binding handlers in controls.nas. Move the "tip popup" code from view.nas to a new gui.nas module, and make it generically useful. Wire up flap steppings for the 747 as an example of per-aircraft flaps. Realtime-based property slewing, to eliminate dependence of trim and view direction rates on frame rate.
2003-12-22 20:05:18 +00:00
<command>nasal</command>
<script>controls.throttleMouse()</script>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
</binding>
Added bindings for elevator and ailerons in mode 1, as in current mouse support.
2002-03-26 13:17:32 +00:00
</y-axis>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
</mode>
<!-- Mode 2: view mode -->
<mode n="2">
<cursor>left-right</cursor>
Add explicit types for all non-string properties. This will help a lot, since otherwise a property that is never set or tied by FlightGear itself will always be kept as a string and converted on each access. That's why fgGetBool and friends could take up a lot of processor time sometimes.
2002-04-09 10:45:47 +00:00
<constrained type="bool">true</constrained>
<pass-through type="bool">false</pass-through>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
Vassilii Khachaturov: "If one does current view translation (dragging with the middle button in the 2nd (view adjustment) mode), then, upon the left click, only the pitch offsets are recentered, and not the x/y/z offsets." ... "jumps back only when the mid-button is pressed on the left-click."
2005-10-23 16:00:06 +00:00
<!-- left button centres view direction; middle + left also resets view point -->
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
<button n="0">
<binding>
<command>property-assign</command>
Jim Wilson: These are the updates for the View manager properties. Removed the last of items (within the viewer/viewmgr) hard coded to view number. Added support for per view configuration of ground level nearplane value. Tower views look very nice with little or no z-buffer problem in the models. Pilot offset dialog can be used to move eye in all views.
2002-04-18 14:52:32 +00:00
<property>/sim/current-view/heading-offset-deg</property>
Remove fragile alias references in bindings and replace with property references.
2004-06-24 14:45:48 +00:00
<property>/sim/view/config/front-direction-deg</property>
In panning fixed left button to return both pitch and heading offset to zero
2002-04-19 01:12:34 +00:00
</binding>
<binding>
<command>property-assign</command>
Jim Wilson: There are a number of little changes. Tested with current cvs as of 20:30EST 04Feb. Actually been running since the beginning of January with these patches. All changes work without crashing with the current base package cvs, but there are some visual problems with the views (other than pilot view) without changes to the base package. As soon as you can build test and commit I can add in those base package updates that will make it all work nicely. I will also go through all the 3D Aircraft configs to make sure the change in the "pitch-offset" for cockpit views (see below) are made to maintain current behavior. Here are the files (changes listed below): http://www.spiderbark.com/fgfs/viewerupdate.diffs.gz http://www.spiderbark.com/fgfs/viewerupdate.tar.gz
2003-02-06 19:46:48 +00:00
<property>/sim/current-view/goal-pitch-offset-deg</property>
Vassilii Khachaturov: "If one does current view translation (dragging with the middle button in the 2nd (view adjustment) mode), then, upon the left click, only the pitch offsets are recentered, and not the x/y/z offsets." ... "jumps back only when the mid-button is pressed on the left-click."
2005-10-23 16:00:06 +00:00
<property>/sim/view/config/pitch-offset-deg</property>
</binding>
<binding>
<condition>
<property>/devices/status/mice/mouse[0]/button[1]</property>
</condition>
<command>property-assign</command>
<property>/sim/current-view/x-offset-m</property>
<property>/sim/view/config/x-offset-m</property>
</binding>
<binding>
<condition>
<property>/devices/status/mice/mouse[0]/button[1]</property>
</condition>
<command>property-assign</command>
<property>/sim/current-view/y-offset-m</property>
<property>/sim/view/config/y-offset-m</property>
</binding>
<binding>
<condition>
<property>/devices/status/mice/mouse[0]/button[1]</property>
</condition>
<command>property-assign</command>
<property>/sim/current-view/z-offset-m</property>
<property>/sim/view/config/z-offset-m</property>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
</binding>
</button>
<!-- right button switches modes -->
<button n="2">
<binding>
<command>property-assign</command>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<property>/devices/status/mice/mouse[0]/mode</property>
Add explicit types for all non-string properties. This will help a lot, since otherwise a property that is never set or tied by FlightGear itself will always be kept as a string and converted on each access. That's why fgGetBool and friends could take up a lot of processor time sometimes.
2002-04-09 10:45:47 +00:00
<value type="int">0</value>
Initial mouse configuration support. This will be ignored unless you configure --with-new-mouse, and there's not much there yet anyway.
2002-03-23 22:30:39 +00:00
</binding>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
</button>
Assign buttons 3 and 4 to elevator trim. Under X11, at least, these will map to the mouse wheel if it's enabled.
2002-05-02 14:08:26 +00:00
<!-- extra buttons control elevator trim -->
<!-- these are often assigned to mouse-wheel motion in Linux -->
<button n="3">
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/elevator-trim</property>
Assign buttons 3 and 4 to elevator trim. Under X11, at least, these will map to the mouse wheel if it's enabled.
2002-05-02 14:08:26 +00:00
<step type="double">0.01</step>
</binding>
</button>
<button n="4">
<binding>
<command>property-adjust</command>
Updates to refelect the controls update of FlightGear. It could be there are a few unupdated controls left. To simplify the transisition there is a file called README.properties in the docs-mini directory of FlightGear that explains the new controls layout.
2003-04-01 12:41:12 +00:00
<property>/controls/flight/elevator-trim</property>
Assign buttons 3 and 4 to elevator trim. Under X11, at least, these will map to the mouse wheel if it's enabled.
2002-05-02 14:08:26 +00:00
<step type="double">-0.01</step>
</binding>
</button>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<!-- Mouse left/right motion -->
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
<x-axis>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
Melchior FRANZ: I hope Roy doesn't mind that I'm submitting his patch again. I only removed the limits, because they didn't work in several aircraft. This allows you to do unrealistic things like sticking your head out of a 747 cockpit, or "extreme" things like leaving the aircraft, but that's no worse than being able to turn the head several times in a row as in "The Exorcist". * Roy Vegard Ovesen: I've attached a patch to mice.xml that lets you move the camera/viewport with the middle mouse button pressed in mouse view mode. Useful for looking at the compass head on.
2005-01-28 15:17:30 +00:00
<!-- No buttons pressed: rotate the view left or right -->
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
<binding>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<condition>
<and>
<not>
<property>/devices/status/mice/mouse[0]/button[0]</property>
</not>
<not>
<property>/devices/status/mice/mouse[0]/button[1]</property>
</not>
</and>
</condition>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
<command>property-adjust</command>
Jim Wilson: These are the updates for the View manager properties. Removed the last of items (within the viewer/viewmgr) hard coded to view number. Added support for per view configuration of ground level nearplane value. Tower views look very nice with little or no z-buffer problem in the models. Pilot offset dialog can be used to move eye in all views.
2002-04-18 14:52:32 +00:00
<property>/sim/current-view/heading-offset-deg</property>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
<factor type="double">-360</factor>
<min type="double">0</min>
<max type="double">360</max>
<wrap type="bool">true</wrap>
</binding>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
Melchior FRANZ: I hope Roy doesn't mind that I'm submitting his patch again. I only removed the limits, because they didn't work in several aircraft. This allows you to do unrealistic things like sticking your head out of a 747 cockpit, or "extreme" things like leaving the aircraft, but that's no worse than being able to turn the head several times in a row as in "The Exorcist". * Roy Vegard Ovesen: I've attached a patch to mice.xml that lets you move the camera/viewport with the middle mouse button pressed in mouse view mode. Useful for looking at the compass head on.
2005-01-28 15:17:30 +00:00
<!-- Middle button pressed: move the view position left or right -->
<binding>
<condition>
<and>
<not>
<property>/devices/status/mice/mouse[0]/button[0]</property>
</not>
<property>/devices/status/mice/mouse[0]/button[1]</property>
</and>
</condition>
<command>property-adjust</command>
<property>/sim/current-view/x-offset-m</property>
<factor type="double">1</factor>
<wrap type="bool">false</wrap>
</binding>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
</x-axis>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<!-- Mouse up/down motion -->
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
<y-axis>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<!-- No buttons pressed: tilt the view up and down -->
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
<binding>
Added conditional bindings for throttle and rudder when mouse is pressed.
2002-03-27 22:51:13 +00:00
<condition>
<and>
<not>
<property>/devices/status/mice/mouse[0]/button[0]</property>
</not>
<not>
<property>/devices/status/mice/mouse[0]/button[1]</property>
</not>
</and>
</condition>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
<command>property-adjust</command>
Jim Wilson: These are the updates for the View manager properties. Removed the last of items (within the viewer/viewmgr) hard coded to view number. Added support for per view configuration of ground level nearplane value. Tower views look very nice with little or no z-buffer problem in the models. Pilot offset dialog can be used to move eye in all views.
2002-04-18 14:52:32 +00:00
<property>/sim/current-view/pitch-offset-deg</property>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
<factor type="double">-180</factor>
<min type="double">-90</min>
<max type="double">90</max>
<wrap type="bool">false</wrap>
</binding>
Melchior FRANZ: I hope Roy doesn't mind that I'm submitting his patch again. I only removed the limits, because they didn't work in several aircraft. This allows you to do unrealistic things like sticking your head out of a 747 cockpit, or "extreme" things like leaving the aircraft, but that's no worse than being able to turn the head several times in a row as in "The Exorcist". * Roy Vegard Ovesen: I've attached a patch to mice.xml that lets you move the camera/viewport with the middle mouse button pressed in mouse view mode. Useful for looking at the compass head on.
2005-01-28 15:17:30 +00:00
<!-- Middle button pressed: move the view up and down -->
<binding>
<condition>
<and>
<not>
<property>/devices/status/mice/mouse[0]/button[0]</property>
</not>
<property>/devices/status/mice/mouse[0]/button[1]</property>
</and>
</condition>
<command>property-adjust</command>
<property>/sim/current-view/y-offset-m</property>
<factor type="double">-1</factor>
<wrap type="bool">false</wrap>
</binding>
XML format changes, so that bindings are always mode-specific. Added support for panning the view, as in the existing mouse view mode.
2002-03-26 12:49:14 +00:00
</y-axis>
</mode>
Added configuration for different modes and cursors. The XML format is subject to change, and this file is still used only when FlightGear is configured --with-new-mouse.
2002-03-25 11:59:26 +00:00
Initial mouse configuration support. This will be ignored unless you configure --with-new-mouse, and there's not much there yet anyway.
2002-03-23 22:30:39 +00:00
</mouse>
</PropertyList>
In panning fixed left button to return both pitch and heading offset to zero
2002-04-19 01:12:34 +00:00
Copy permalink