fly/fgdata
1
0
Fork 0
Code Activity
fgdata/Aircraft/Instruments/kr-87adf.xml

1152 lines
24 KiB
XML
Raw Normal View History

King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<?xml version="1.0"?>
<!--
King KR-87 ADF radio instrument.
John Check <j4strngs@rockfish.net>
July 2002
This is an instrument configuration file for the open-source flight
simulator FlightGear (www.flightgear.org). The file is an XML-encoded
FlightGear property list defining the instrument's layers and actions.
Each instrument is composed of layers stacked on top of each other.
A layer may be a texture (with transparent parts to show the layers
underneath), text, or a special layer that switches between two
others (say, to turn an indicator light on or off). Each layer can
move independently in proportion to a property value, and text
can be generated from property values as well: all of the layer's
movements are defined as transformations.
Actions are hotspots on the instrument that will respond to a mouse
click. Actions always modify the values of properties, either by
adjusting them, toggling them, or swaping them with other
properties' values.
-->
<PropertyList>
<name>ADF Radio</name>
<w-base>256</w-base>
<h-base>52</h-base>
<layers>
<layer>
<name>background</name>
<texture>
<path>Aircraft/Instruments/Textures/kr-87adf.rgb</path>
<x1>0.0</x1>
<y1>0.80</y1>
<x2>1.0</x2>
<y2>1.0</y2>
</texture>
</layer>
<layer>
<name>ADF annunciator</name>
<condition>
<equals>
<property>/radios/kr-87/annunciators/adf</property>
<value>true</value>
</equals>
</condition>
<type>text</type>
<point-size>6</point-size>
<color>
<red>1.0</red>
<green>0.5</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>literal</type>
<text>ADF</text>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
<offset>-110</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>3</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>ANT annunciator</name>
<condition>
<equals>
<property>/radios/kr-87/annunciators/ant</property>
<value>true</value>
</equals>
</condition>
<type>text</type>
<point-size>6</point-size>
<color>
<red>1.0</red>
<green>0.5</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>literal</type>
<text>ANT</text>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
<offset>-110</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>3</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>Selected FRQ display</name>
<condition>
Make adf power on/off a seperate property.
2002-08-29 02:18:36 +00:00
<equals>
<property>/radios/kr-87/inputs/power-btn</property>
<value>true</value>
</equals>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</condition>
<type>text</type>
<font>led</font>
The new led font is now antialiased (`a la Andy) and has twice the design size (character height) of the old one. Advantages: - displays . and : correctly with less space around, and digits with more space around (using Andy's improvements to plib) - small text becomes much more legible (-> clock, AP-altitude) - the font contains pretty much every character that can be displayed on a seven segment display, so it might be more useful for future instruments.
2002-11-02 00:23:46 +00:00
<point-size>7</point-size>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<color>
<red>1.0</red>
<green>0.5</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>number-value</type>
<property>/radios/kr-87/outputs/selected-khz</property>
<format>%4.0f</format>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
<offset>-85</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>3</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>BFO annunciator</name>
<condition>
<equals>
<property>/radios/kr-87/annunciators/bfo</property>
<value>true</value>
</equals>
</condition>
<type>text</type>
<point-size>6</point-size>
<color>
<red>1.0</red>
<green>0.5</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>literal</type>
<text>BFO</text>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
<offset>-50</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>13</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>Standby FRQ annunciator</name>
<condition>
<equals>
<property>/radios/kr-87/annunciators/frq</property>
<value>true</value>
</equals>
</condition>
<type>text</type>
<point-size>6</point-size>
<color>
<red>1.0</red>
<green>0.5</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>literal</type>
<text>FRQ</text>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
<offset>-45</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>0</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>Standby FRQ display</name>
<condition>
<equals>
<property>/radios/kr-87/annunciators/frq</property>
<value>true</value>
</equals>
<equals>
<property>/radios/kr-87/modes/stby</property>
<value>0</value>
</equals>
</condition>
<type>text</type>
<font>led</font>
The new led font is now antialiased (`a la Andy) and has twice the design size (character height) of the old one. Advantages: - displays . and : correctly with less space around, and digits with more space around (using Andy's improvements to plib) - small text becomes much more legible (-> clock, AP-altitude) - the font contains pretty much every character that can be displayed on a seven segment display, so it might be more useful for future instruments.
2002-11-02 00:23:46 +00:00
<point-size>7</point-size>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<color>
<red>1.0</red>
<green>0.5</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>number-value</type>
<property>/radios/kr-87/outputs/standby-khz</property>
<format>%4.0f</format>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
<offset>-10</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>3</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>Flight Timer display</name>
<condition>
Make adf power on/off a seperate property.
2002-08-29 02:18:36 +00:00
<equals>
<property>/radios/kr-87/inputs/power-btn</property>
<value>true</value>
</equals>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<equals>
<property>/radios/kr-87/modes/stby</property>
<value>1</value>
</equals>
<equals>
<property>/radios/kr-87/annunciators/flt</property>
<value>1</value>
</equals>
</condition>
<type>text</type>
<font>led</font>
The new led font is now antialiased (`a la Andy) and has twice the design size (character height) of the old one. Advantages: - displays . and : correctly with less space around, and digits with more space around (using Andy's improvements to plib) - small text becomes much more legible (-> clock, AP-altitude) - the font contains pretty much every character that can be displayed on a seven segment display, so it might be more useful for future instruments.
2002-11-02 00:23:46 +00:00
<point-size>7</point-size>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<color>
<red>1.0</red>
<green>0.5</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>text-value</type>
<property>/radios/kr-87/outputs/timer-string</property>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
<offset>-10</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>3</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>Elapsed Timer display</name>
<condition>
Make adf power on/off a seperate property.
2002-08-29 02:18:36 +00:00
<equals>
<property>/radios/kr-87/inputs/power-btn</property>
<value>true</value>
</equals>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<equals>
<property>/radios/kr-87/modes/stby</property>
<value>1</value>
</equals>
<equals>
<property>/radios/kr-87/annunciators/et</property>
<value>1</value>
</equals>
</condition>
<type>text</type>
<font>led</font>
The new led font is now antialiased (`a la Andy) and has twice the design size (character height) of the old one. Advantages: - displays . and : correctly with less space around, and digits with more space around (using Andy's improvements to plib) - small text becomes much more legible (-> clock, AP-altitude) - the font contains pretty much every character that can be displayed on a seven segment display, so it might be more useful for future instruments.
2002-11-02 00:23:46 +00:00
<point-size>7</point-size>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<color>
<red>1.0</red>
<green>0.5</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>text-value</type>
<property>/radios/kr-87/outputs/timer-string</property>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
<offset>-10</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>3</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>Flight Time annunciator</name>
<condition>
<equals>
<property>/radios/kr-87/annunciators/flt</property>
<value>true</value>
</equals>
</condition>
<type>text</type>
<point-size>6</point-size>
<color>
<red>1.0</red>
<green>0.5</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>literal</type>
<text>FLT</text>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
<offset>40</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>13</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>Elapsed Time annunciator</name>
<condition>
<equals>
<property>/radios/kr-87/annunciators/et</property>
<value>true</value>
</equals>
</condition>
<type>text</type>
<point-size>6</point-size>
<color>
<red>1.0</red>
<green>0.5</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>literal</type>
<text>ET</text>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
<offset>45</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>0</offset>
</transformation>
</transformations>
</layer>
<!-- knobs -->
<layer>
<name>freq/time adjust</name>
<texture>
<path>Aircraft/Instruments/Textures/blister.rgb</path>
<x1>0.0</x1>
<y1>0.75</y1>
<x2>0.25</x2>
<y2>1.0</y2>
</texture>
<h>32</h>
<w>32</w>
<transformations>
<transformation>
<type>x-shift</type>
<offset>100</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>ident on|off|volume knob</name>
<texture>
<path>Aircraft/Instruments/Textures/blister.rgb</path>
<x1>0.0</x1>
<y1>0.75</y1>
<x2>0.25</x2>
<y2>1.0</y2>
</texture>
<w>15</w>
<h>15</h>
<transformations>
<transformation>
<type>x-shift</type>
<offset>70</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>-16</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>ident knob pointer</name>
<texture>
<path>Aircraft/Instruments/Textures/blister.rgb</path>
<x1>0.0</x1>
<y1>0.1640625</y1>
<x2>0.1</x2>
<y2>0.328125</y2>
</texture>
<w>2</w>
<h>6</h>
<transformations>
<transformation>
<type>x-shift</type>
<offset>70</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>-16</offset>
</transformation>
<transformation>
<type>rotation</type>
Make adf power on/off a seperate property.
2002-08-29 02:18:36 +00:00
<property>/radios/kr-87/inputs/volume</property>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<min>0</min>
<max>2</max>
<scale>140</scale>
<offset>-140</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>3</offset>
</transformation>
</transformations>
</layer>
<!-- button labels- this is temporary -->
<layer>
<name>ADF button label</name>
<type>text</type>
<point-size>6</point-size>
<color>
<red>0.0</red>
<green>0.0</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>literal</type>
<text>ADF</text>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<offset>-96</offset>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</transformation>
<transformation>
<type>y-shift</type>
<offset>-19</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>BFO button label</name>
<type>text</type>
<point-size>6</point-size>
<color>
<red>0.0</red>
<green>0.0</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>literal</type>
<text>BFO</text>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<offset>-72</offset>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</transformation>
<transformation>
<type>y-shift</type>
<offset>-19</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>FRQ button label</name>
<type>text</type>
<point-size>6</point-size>
<color>
<red>0.0</red>
<green>0.0</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>literal</type>
<text>FRQ</text>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<offset>-45</offset>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</transformation>
<transformation>
<type>y-shift</type>
<offset>-19</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>FLT button label</name>
<type>text</type>
<point-size>4</point-size>
<color>
<red>0.0</red>
<green>0.0</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>literal</type>
<text>FLT
/ET</text>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
<offset>-16</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>-15</offset>
</transformation>
</transformations>
</layer>
<layer>
<name>SET/RST button label</name>
<type>text</type>
<point-size>4</point-size>
<color>
<red>0.0</red>
<green>0.0</green>
<blue>0.0</blue>
</color>
<chunks>
<chunk>
<type>literal</type>
<text>SET
/RST</text>
</chunk>
</chunks>
<transformations>
<transformation>
<type>x-shift</type>
<offset>10</offset>
</transformation>
<transformation>
<type>y-shift</type>
<offset>-15</offset>
</transformation>
</transformations>
</layer>
<!-- end labels -->
</layers>
<actions>
<!-- buttons -->
<action>
<name>ADF button</name>
<button>0</button>
<x>-97</x>
<y>-24</y>
<w>18</w>
<h>14</h>
<binding>
<command>property-toggle</command>
<property>/radios/kr-87/inputs/adf-btn</property>
</binding>
</action>
<action>
<name>BFO button</name>
<button>0</button>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<x>-73</x>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<y>-24</y>
<w>18</w>
<h>14</h>
<binding>
<command>property-toggle</command>
<property>/radios/kr-87/inputs/bfo-btn</property>
</binding>
</action>
<action>
<name>FRQ button</name>
<button>0</button>
<x>-45</x>
<y>-24</y>
<w>18</w>
<h>14</h>
<binding>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<command>property-assign</command>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<property>/radios/kr-87/inputs/frq-btn</property>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<value type="bool">true</value>
<repeatable type="bool">false</repeatable>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</binding>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<mod-up>
<binding>
<command>property-assign</command>
<property>/radios/kr-87/inputs/frq-btn</property>
<value type="bool">false</value>
</binding>
</mod-up>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</action>
<action>
<name>Flight timer/ Elapsed timer button</name>
<button>0</button>
<x>-20</x>
<y>-24</y>
<w>18</w>
<h>14</h>
<binding>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<command>property-assign</command>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<property>/radios/kr-87/inputs/flt-et-btn</property>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<value type="bool">true</value>
<repeatable type="bool">false</repeatable>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</binding>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<mod-up>
<binding>
<command>property-assign</command>
<property>/radios/kr-87/inputs/flt-et-btn</property>
<value type="bool">false</value>
</binding>
</mod-up>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</action>
<action>
<name>Timer set reset</name>
<button>0</button>
<x>7</x>
<y>-24</y>
<w>18</w>
<h>14</h>
<binding>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<command>property-assign</command>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<property>/radios/kr-87/inputs/set-rst-btn</property>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<value type="bool">true</value>
<repeatable type="bool">false</repeatable>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</binding>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<mod-up>
<binding>
<command>property-assign</command>
<property>/radios/kr-87/inputs/set-rst-btn</property>
<value type="bool">false</value>
</binding>
</mod-up>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</action>
<!-- end buttons -->
<action>
<name>timer set seconds down</name>
<button>0</button>
<x>89</x>
<y>-12</y>
<w>12</w>
<h>24</h>
<condition>
<equals>
<property>/radios/kr-87/modes/count</property>
<value>2</value>
</equals>
</condition>
<binding>
<command>property-adjust</command>
<property>/radios/kr-87/outputs/elapsed-timer</property>
<step>-1</step>
<min>1.0</min>
<max>216000.0</max>
<wrap>0</wrap>
</binding>
</action>
<action>
<name>timer set seconds up</name>
<button>0</button>
<x>100</x>
<y>-12</y>
<w>12</w>
<h>24</h>
<condition>
<equals>
<property>/radios/kr-87/modes/count</property>
<value>2</value>
</equals>
</condition>
<binding>
<command>property-adjust</command>
<property>/radios/kr-87/outputs/elapsed-timer</property>
<step>1</step>
<min>1.0</min>
<max>216000.0</max>
<wrap>0</wrap>
</binding>
</action>
<action>
Fixes from Julian Foad: - makes instrument knobs turn at a realistic rate - removes redundant <min> and <max> specifications* - corrects the indentation to reflect nesting depth - corrects some descriptive names * E.g. if the gyro compass heading is 365, there's no point clamping the value to 360 before drawing it. Just using the given value is more likely to be right - or, if it's wrong, at least we won't hide the bug.
2002-11-10 20:44:17 +00:00
<name>timer set minutes down</name>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<button>1</button>
<x>89</x>
<y>-12</y>
<w>12</w>
<h>24</h>
<condition>
<equals>
<property>/radios/kr-87/modes/count</property>
<value>2</value>
</equals>
</condition>
<binding>
<command>property-adjust</command>
<property>/radios/kr-87/outputs/elapsed-timer</property>
<step>-60</step>
<min>1.0</min>
<max>3599.0</max>
<wrap>0</wrap>
</binding>
</action>
<action>
Fixes from Julian Foad: - makes instrument knobs turn at a realistic rate - removes redundant <min> and <max> specifications* - corrects the indentation to reflect nesting depth - corrects some descriptive names * E.g. if the gyro compass heading is 365, there's no point clamping the value to 360 before drawing it. Just using the given value is more likely to be right - or, if it's wrong, at least we won't hide the bug.
2002-11-10 20:44:17 +00:00
<name>timer set minutes up</name>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<button>1</button>
<x>100</x>
<y>-12</y>
<w>12</w>
<h>24</h>
<condition>
<equals>
<property>/radios/kr-87/modes/count</property>
<value>2</value>
</equals>
</condition>
<binding>
<command>property-adjust</command>
<property>/radios/kr-87/outputs/elapsed-timer</property>
<step>60</step>
<min>1.0</min>
<max>3599.0</max>
<wrap>0</wrap>
</binding>
</action>
<action>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<name>small frequency decrease selected</name>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<button>0</button>
<x>89</x>
<y>-12</y>
<w>12</w>
<h>24</h>
<condition>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<and>
<not-equals>
<property>/radios/kr-87/modes/count</property>
<value>2</value>
</not-equals>
<equals>
<property>/radios/kr-87/modes/stby</property>
<value>1</value>
</equals>
</and>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</condition>
<binding>
<command>property-adjust</command>
<property>/radios/kr-87/outputs/selected-khz</property>
<step>-1</step>
<min>100</min>
Patch from Julian Foad: OK -- thanks. I have now fixed up all the other XML files in the base package that use "max" and "wrap". Those affected are all in Aircraft/Instruments/. In these files I have also corrected the indentation in some places, and corrected the frequency controls in nav3.xml (which does not seem to be in use), and corrected a few obvious hotspot position bugs. Where the radios used wrapping to toggle the ident button between 0 and 1, I have changed this to use "property-toggle" instead.
2003-01-19 22:00:08 +00:00
<max>1300</max>
<resolution>1</resolution>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<wrap>1</wrap>
</binding>
</action>
<action>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<name>small increase selected</name>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<button>0</button>
<x>100</x>
<y>-12</y>
<w>12</w>
<h>24</h>
<condition>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<and>
<not-equals>
<property>/radios/kr-87/modes/count</property>
<value>2</value>
</not-equals>
<equals>
<property>/radios/kr-87/modes/stby</property>
<value>1</value>
</equals>
</and>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</condition>
<binding>
<command>property-adjust</command>
<property>/radios/kr-87/outputs/selected-khz</property>
<step>1</step>
<min>100</min>
Patch from Julian Foad: OK -- thanks. I have now fixed up all the other XML files in the base package that use "max" and "wrap". Those affected are all in Aircraft/Instruments/. In these files I have also corrected the indentation in some places, and corrected the frequency controls in nav3.xml (which does not seem to be in use), and corrected a few obvious hotspot position bugs. Where the radios used wrapping to toggle the ident button between 0 and 1, I have changed this to use "property-toggle" instead.
2003-01-19 22:00:08 +00:00
<max>1300</max>
<resolution>1</resolution>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<wrap>1</wrap>
</binding>
</action>
<action>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<name>large decrease selected</name>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<button>1</button>
<x>89</x>
<y>-12</y>
<w>12</w>
<h>24</h>
<condition>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<and>
<not-equals>
<property>/radios/kr-87/modes/count</property>
<value>2</value>
</not-equals>
<equals>
<property>/radios/kr-87/modes/stby</property>
<value>1</value>
</equals>
</and>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</condition>
<binding>
<command>property-adjust</command>
<property>/radios/kr-87/outputs/selected-khz</property>
<step>-25</step>
<min>100</min>
Patch from Julian Foad: OK -- thanks. I have now fixed up all the other XML files in the base package that use "max" and "wrap". Those affected are all in Aircraft/Instruments/. In these files I have also corrected the indentation in some places, and corrected the frequency controls in nav3.xml (which does not seem to be in use), and corrected a few obvious hotspot position bugs. Where the radios used wrapping to toggle the ident button between 0 and 1, I have changed this to use "property-toggle" instead.
2003-01-19 22:00:08 +00:00
<max>1300</max>
<resolution>1</resolution>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<wrap>1</wrap>
</binding>
</action>
<action>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<name>large increase selected</name>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<button>1</button>
<x>100</x>
<y>-12</y>
<w>12</w>
<h>24</h>
<condition>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<and>
<not-equals>
<property>/radios/kr-87/modes/count</property>
<value>2</value>
</not-equals>
<equals>
<property>/radios/kr-87/modes/stby</property>
<value>1</value>
</equals>
</and>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</condition>
<binding>
<command>property-adjust</command>
<property>/radios/kr-87/outputs/selected-khz</property>
<step>25</step>
<min>100</min>
Patch from Julian Foad: OK -- thanks. I have now fixed up all the other XML files in the base package that use "max" and "wrap". Those affected are all in Aircraft/Instruments/. In these files I have also corrected the indentation in some places, and corrected the frequency controls in nav3.xml (which does not seem to be in use), and corrected a few obvious hotspot position bugs. Where the radios used wrapping to toggle the ident button between 0 and 1, I have changed this to use "property-toggle" instead.
2003-01-19 22:00:08 +00:00
<max>1300</max>
<resolution>1</resolution>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<wrap>1</wrap>
</binding>
</action>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<action>
<name>small frequency decrease standby</name>
<button>0</button>
<x>89</x>
<y>-12</y>
<w>12</w>
<h>24</h>
<condition>
<and>
<not-equals>
<property>/radios/kr-87/modes/count</property>
<value>2</value>
</not-equals>
<equals>
<property>/radios/kr-87/modes/stby</property>
<value>0</value>
</equals>
</and>
</condition>
<binding>
<command>property-adjust</command>
<property>/radios/kr-87/outputs/standby-khz</property>
<step>-1</step>
<min>100</min>
<max>1300</max>
<resolution>1</resolution>
<wrap>1</wrap>
</binding>
</action>
<action>
<name>small increase standby</name>
<button>0</button>
<x>100</x>
<y>-12</y>
<w>12</w>
<h>24</h>
<condition>
<and>
<not-equals>
<property>/radios/kr-87/modes/count</property>
<value>2</value>
</not-equals>
<equals>
<property>/radios/kr-87/modes/stby</property>
<value>0</value>
</equals>
</and>
</condition>
<binding>
<command>property-adjust</command>
<property>/radios/kr-87/outputs/standby-khz</property>
<step>1</step>
<min>100</min>
<max>1300</max>
<resolution>1</resolution>
<wrap>1</wrap>
</binding>
</action>
<action>
<name>large decrease standby</name>
<button>1</button>
<x>89</x>
<y>-12</y>
<w>12</w>
<h>24</h>
<condition>
<and>
<not-equals>
<property>/radios/kr-87/modes/count</property>
<value>2</value>
</not-equals>
<equals>
<property>/radios/kr-87/modes/stby</property>
<value>0</value>
</equals>
</and>
</condition>
<binding>
<command>property-adjust</command>
<property>/radios/kr-87/outputs/standby-khz</property>
<step>-25</step>
<min>100</min>
<max>1300</max>
<resolution>1</resolution>
<wrap>1</wrap>
</binding>
</action>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<action>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<name>large increase standby</name>
<button>1</button>
<x>100</x>
<y>-12</y>
<w>12</w>
<h>24</h>
<condition>
<and>
<not-equals>
<property>/radios/kr-87/modes/count</property>
<value>2</value>
</not-equals>
<equals>
<property>/radios/kr-87/modes/stby</property>
<value>0</value>
</equals>
</and>
</condition>
<binding>
<command>property-adjust</command>
<property>/radios/kr-87/outputs/standby-khz</property>
<step>25</step>
<min>100</min>
<max>1300</max>
<resolution>1</resolution>
<wrap>1</wrap>
</binding>
</action>
<action>
<name>ident volume increase</name>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<button>0</button>
<x>70</x>
<y>-24</y>
<w>8</w>
<h>16</h>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<condition>
<property>/radios/kr-87/inputs/power-btn</property>
</condition>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<binding>
<command>property-adjust</command>
Make adf power on/off a seperate property.
2002-08-29 02:18:36 +00:00
<property>/radios/kr-87/inputs/volume</property>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<step>0.1</step>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<min>0</min>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<max>1</max>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</binding>
</action>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<action>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<name>ident volume decrease</name>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<button>0</button>
<x>62</x>
<y>-24</y>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<w>8</w>
<h>16</h>
<condition>
<and>
<property>radios/kr-87/inputs/power-btn</property>
<greater-than>
<property>radios/kr-87/inputs/volume</property>
<value>0.01</value>
</greater-than>
</and>
</condition>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<binding>
<command>property-adjust</command>
Make adf power on/off a seperate property.
2002-08-29 02:18:36 +00:00
<property>/radios/kr-87/inputs/volume</property>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<step>-0.1</step>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
<min>0</min>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<max>1</max>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</binding>
</action>
Updates the the kr-87 ADF. Could someone confirm this is actually correct?
2004-01-24 10:09:54 +00:00
<action>
<name>power on</name>
<button>0</button>
<x>70</x>
<y>-24</y>
<w>8</w>
<h>16</h>
<condition>
<and>
<less-than>
<property>/radios/kr-87/inputs/volume</property>
<value>0.01</value>
</less-than>
<not>
<property>/radios/kr-87/inputs/power-btn</property>
</not>
</and>
</condition>
<binding>
<command>property-assign</command>
<property>/radios/kr-87/inputs/power-btn</property>
<value type="bool">true</value>
</binding>
</action>
<action>
<name>power off</name>
<button>0</button>
<x>62</x>
<y>-24</y>
<w>8</w>
<h>16</h>
<condition>
<and>
<less-than>
<property>/radios/kr-87/inputs/volume</property>
<value>0.01</value>
</less-than>
<property>/radios/kr-87/inputs/power-btn</property>
</and>
</condition>
<binding>
<command>property-assign</command>
<property>/radios/kr-87/inputs/power-btn</property>
<value type="bool">false</value>
</binding>
</action>
King KR-87 ADF radio markup It's a little funky to use right now because the FRQ and timer buttons should be momentary action. As it stands you need to do 2 clicks to send on/off. If anybody can think of a workaround, we could use one. For now the ADF and BFO buttons just toggle the annunciators. For ANT mode, I just need to wire up the ADF needle. Two clicks on FRQ flip flops the selected and standby freqs. Two clicks of FLT/ET will change the standby display to timer mode and another two will flip between FLT and ET. If you click and the annunciator flashes briefly but the display does not change, you need to click FRQ -one time- to get the button in phase. ET mode has a count down mode, this is where it really gets tricky. On the real thing, you hold the SET/RST button for 2 seconds. Here you must click one time, wait for the display to flash then click one more time. Now you can set the time to count down. Right clicking the dial will set minutes, middle click (I know, I'll make it a keyboard modifier later) sets hours. As usual the left side decreases and right side increases. Once you have the desired time set, click the SET/RST button twice in rapid succession. Two rapid clicks will reset the elapsed timer when it's counting down, but also while you are setting it (when display is flashing). When the count down timer reaches zero, it starts counting up again. It -should- flash for 15 seconds and set off a warning tone, but for now it doesn't. The unit is also equipped with an on/off/volume knob. Whne the unit is powered down the timers are reset. TODO: Add labeling Wire up ADF needle Prettier face
2002-07-30 04:03:36 +00:00
</actions>
</PropertyList>
Copy permalink