fly/fgdata
1
0
Fork 0
Code Activity
fgdata/Aircraft/Instruments-3d/vor/vor.ac

508 lines
6.9 KiB
Text
Raw Normal View History

Start on some basic 3D panel instruments. For now, just reuse textures that are already sitting around for the 2D panel. Many of the instruments are not yet functional.
2004-02-15 01:03:07 +00:00
AC3Db
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
MATERIAL "ac3dmat1" rgb 1 1 1 amb 0.2 0.2 0.2 emis 0 0 0 spec 0.2 0.2 0.2 shi 16 trans 0
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
MATERIAL "ac3dmat1" rgb 1 1 1 amb 0.2 0.2 0.2 emis 0 0 0 spec 0 0 0 shi 10 trans 0
Dave Perry: Changes: 1. remove typo from all the /Systems/KAP140.xml files 2. changes to put radio_stack in Instruments-3d 3. Add "pick" to vor, alt, hi, in Instruments-3d 4. changes to pa24-250 and pa28-161 to use 2 and 3. 5. add "pick" and "2d text in window" in 3d OAT in pa24-250
2007-02-10 21:24:46 +00:00
MATERIAL "ac3dmat6" rgb 0 1 0 amb 0.2 0.2 0.2 emis 0 0 0 spec 0 0 0 shi 10 trans 1
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
MATERIAL "DefaultWhite" rgb 1 1 1 amb 1 1 1 emis 0.15 0.15 0.15 spec 0.5 0.5 0.5 shi 64 trans 0
Start on some basic 3D panel instruments. For now, just reuse textures that are already sitting around for the 2D panel. Many of the instruments are not yet functional.
2004-02-15 01:03:07 +00:00
OBJECT world
Dave Perry: parks gs needle when gs out of range, yoke-pa24 animation change to accommodate ap/joystick inputs
2009-11-08 18:51:39 +00:00
kids 14
OBJECT poly
name "GlideslopeNeedlePark"
loc -0.003005 0 -0.00318549
crease 45.000000
numvert 6
0 0.000533 0.0187818
0 0.000533 -0.0124695
0 -0.000532 -0.0124695
0 0.000533 0.00311013
0 -0.000532 0.0187818
0 -0.000532 0.00311013
numsurf 2
SURF 0x0
mat 3
refs 4
5 0 0
3 0 0
0 0 0
4 0 0
SURF 0x0
mat 3
refs 4
5 0 0
2 0 0
1 0 0
3 0 0
kids 0
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
OBJECT poly
name "GS_out_of_range"
loc -0.00480549 1.74623e-10 0.0198121
texture "GS.rgb"
crease 45.000000
numvert 4
0 0.00572082 -0.00379381
0 0.00572082 0.00307118
0 -0.00503432 0.00307118
0 -0.00503432 -0.00379381
numsurf 1
SURF 0x30
mat 0
refs 4
0 1 1
1 0.515625 1
2 0.515625 0.078125
3 1 0.078125
kids 0
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
OBJECT poly
name "Face"
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
texture "vor02.rgb"
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
crease 45.000000
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
numvert 6
-0.004518 0.04 -0.04
-0.004518 -0.04 -0.04
-0.004518 -0.04 0.04
-0.004518 0.04 0.04
-0.004518 0 0.04
-0.004518 0 -0.04
numsurf 2
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
SURF 0x0
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 3
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
refs 4
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
0 0.966797 0.958984
3 0.00976562 0.958984
4 0.00976562 0.480469
5 0.966797 0.480469
SURF 0x0
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 3
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
refs 4
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
1 0.966797 0
5 0.966797 0.480469
4 0.00976562 0.480469
2 0.00976562 0
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
kids 0
OBJECT poly
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
name "Front"
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
texture "vor03.rgb"
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
crease 45.000000
numvert 6
0 0.04 -0.04
0 -0.04 -0.04
0 -0.04 0.04
0 0.04 0.04
0 0 0.04
0 0 -0.04
numsurf 2
SURF 0x0
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 3
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
refs 4
0 0.998047 1
3 0 1
4 0 0.5
5 0.998047 0.5
SURF 0x0
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 3
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
refs 4
1 0.998047 0
5 0.998047 0.5
4 0 0.5
2 0 0
kids 0
OBJECT poly
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
name "Ring"
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
texture "vor01.rgb"
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
crease 45.000000
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
numvert 6
-0.001596 0.04 -0.04
-0.001596 -0.04 -0.04
-0.001596 -0.04 0.04
-0.001596 0.04 0.04
-0.001596 0 0.04
-0.001596 0 -0.04
numsurf 2
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
SURF 0x0
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 3
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
refs 4
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
0 0.998047 1
3 0 1
4 0 0.5
5 0.998047 0.5
SURF 0x0
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 3
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
refs 4
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
1 0.998047 0
5 0.998047 0.5
4 0 0.5
2 0 0
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
kids 0
OBJECT poly
Dave Perry: parks gs needle when gs out of range, yoke-pa24 animation change to accommodate ap/joystick inputs
2009-11-08 18:51:39 +00:00
name "GlideslopeNeedle"
loc -0.003005 0 -0.00318549
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
crease 45.000000
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
numvert 6
Dave Perry: parks gs needle when gs out of range, yoke-pa24 animation change to accommodate ap/joystick inputs
2009-11-08 18:51:39 +00:00
0 -0.000532 0.00311013
0 -0.000532 0.0187818
0 0.000533 0.00311013
0 -0.000532 -0.0124695
0 0.000533 -0.0124695
0 0.000533 0.0187818
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
numsurf 2
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
SURF 0x0
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 3
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
refs 4
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
0 0 0
3 0 0
4 0 0
2 0 0
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
SURF 0x0
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 3
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
refs 4
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
0 0 0
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
2 0 0
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
5 0 0
1 0 0
kids 0
OBJECT poly
name "LocalizerNeedle"
Dave Perry: parks gs needle when gs out of range, yoke-pa24 animation change to accommodate ap/joystick inputs
2009-11-08 18:51:39 +00:00
loc -0.003005 -0.00305231 0
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
crease 45.000000
numvert 6
Dave Perry: parks gs needle when gs out of range, yoke-pa24 animation change to accommodate ap/joystick inputs
2009-11-08 18:51:39 +00:00
0 -0.0125218 0.000532
0 0.0188207 0.000532
0 -0.0125218 -0.000532
0 0.0188207 -0.000532
0 0.00314309 0.000532
0 0.00314309 -0.000532
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
numsurf 2
SURF 0x0
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 3
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
refs 4
0 0 0
2 0 0
5 0 0
4 0 0
SURF 0x0
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 3
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
refs 4
1 0 0
4 0 0
5 0 0
3 0 0
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
kids 0
OBJECT poly
name "TO"
loc -0.00674026 0.0040441 -0.0124104
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
texture "TO-FR.rgb"
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
crease 45.000000
numvert 4
0 -0.00271994 -0.00739644
0 -0.00271994 0.00739644
0 0.00271994 0.00739644
0 0.00271994 -0.00739644
numsurf 1
SURF 0x20
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
refs 4
3 0.609375 0.922173
2 0.125 0.922173
1 0.125 0.658523
0 0.609375 0.658523
kids 0
OBJECT poly
name "NAV"
loc -0.0063754 0.0042357 -0.0122067
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
texture "TO-FR.rgb"
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
crease 45.000000
numvert 4
0 0.00239354 -0.00417537
0 0.00239354 0.00417537
0 -0.00239354 0.00417537
0 -0.00239354 -0.00417537
numsurf 1
SURF 0x20
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
The VOR head is now mostly functional: the needles and the outer ring move properly, but the flags are not yet implemented. Currently, the head is hardwired to the NAV1 radio.
2004-02-24 03:14:08 +00:00
refs 4
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
0 0.619696 0.618841
1 0.179834 0.618841
2 0.179834 0.376675
3 0.619696 0.376675
kids 0
OBJECT poly
name "FR"
loc -0.00589943 0.00404461 -0.0128874
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
texture "TO-FR.rgb"
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
crease 45.000000
numvert 4
0 -0.00299626 -0.00718548
0 -0.00299626 0.00718548
0 0.00299626 0.00718548
0 0.00299626 -0.00718548
numsurf 1
SURF 0x20
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
Start on some basic 3D panel instruments. For now, just reuse textures that are already sitting around for the 2D panel. Many of the instruments are not yet functional.
2004-02-15 01:03:07 +00:00
refs 4
Dave Perry: I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers. In the process of doing this model, I have also improved, worked on, or added instruments, etc. to Instruments-3d. * I fixed the adf so the azimuth card is tied to the correct property * Added TO, From, and out-of range indicators to the 3d vor. * Also added a manifold pressure gage and a pa24-250 asi (using digital photos of the actual asi as the starting textures. Affects on other AC. As far as I know, this will add to-from to the vor and correct the adf behavior for pa28-161. It would be a trivial edit to the pa28-161.xml to give the same vor performance to that AC. Now both VORs act as one.
2006-01-24 10:26:16 +00:00
3 0.65189 0.306457
2 0.150411 0.306457
1 0.150411 0.0462088
0 0.65189 0.0462088
Start on some basic 3D panel instruments. For now, just reuse textures that are already sitting around for the 2D panel. Many of the instruments are not yet functional.
2004-02-15 01:03:07 +00:00
kids 0
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
OBJECT poly
name "disk"
Changes from Dave Perry: I put 3 patches and a sound file in this tar. The c172p... patch removes an unnecessary patch I submitted to the c172p. It has no affect on performance. The Instruments-3d... patch adds a working skid ball to the tc and switches the vor xmls to using params so it is easier to edit. It also constrains the glide-slope needle to -32 to 32 degrees. The pa24-250... patch fixes an edit error (corrects a misnamed switch "click", no change in performance) and adds a "squish" sound to the primer pump action.
2006-03-04 13:29:30 +00:00
loc 0 -0.0292413 0.0272215
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
texture "knob.rgb"
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
crease 101.000000
numvert 20
0.01 0.00396059 0.00479285
0.01 0.00606797 0.00108645
0.01 0.00533608 -0.00312831
0.01 0.00210739 -0.0058793
0.01 -0.00210737 -0.0058793
0.01 -0.00533607 -0.00312831
0.01 -0.00606796 0.00108645
0.01 9.31323e-09 0.00625662
0.01 -0.00396058 0.00479285
0 0 0.00625662
0 0.00396058 0.00479285
0 0.00606796 0.00108645
0 0.00533608 -0.00312831
0 0.00210739 -0.0058793
0 -0.00210738 -0.0058793
0 -0.00533607 -0.00312831
0 -0.00606796 0.00108645
0 -0.00396058 0.00479285
0 0 0
0.01 9.31323e-09 0
numsurf 27
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
19 0.484454 0.5
0 0.879385 0.826352
7 1 0.5
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
19 0.484454 0.5
1 0.573978 1
0 0.879385 0.826352
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
19 0.484454 0.5
2 0.226682 0.939693
1 0.573978 1
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
19 0.484454 0.5
3 0 0.673648
2 0.226682 0.939693
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
19 0.484454 0.5
4 0 0.326352
3 0 0.673648
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
19 0.484454 0.5
5 0.226682 0.0603074
4 0 0.326352
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
19 0.484454 0.5
6 0.573978 0
5 0.226682 0.0603074
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
19 0.484454 0.5
8 0.879385 0.173648
6 0.573978 0
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
19 0.484454 0.5
7 1 0.5
8 0.879385 0.173648
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 4
7 0 0
0 0 0
10 0 0
9 0 0
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 4
0 0 0
1 0 0
11 0 0
10 0 0
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 4
1 0 0
2 0 0
12 0 0
11 0 0
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 4
2 0 0
3 0 0
13 0 0
12 0 0
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 4
3 0 0
4 0 0
14 0 0
13 0 0
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 4
4 0 0
5 0 0
15 0 0
14 0 0
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 4
5 0 0
6 0 0
16 0 0
15 0 0
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 4
6 0 0
8 0 0
17 0 0
16 0 0
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 4
8 0 0
7 0 0
9 0 0
17 0 0
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
18 0.484454 0.5
10 0.879385 0.826352
9 1 0.5
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
18 0.484454 0.5
11 0.573978 1
10 0.879385 0.826352
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
18 0.484454 0.5
12 0.226682 0.939693
11 0.573978 1
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
18 0.484454 0.5
13 0 0.673648
12 0.226682 0.939693
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
18 0.484454 0.5
14 0 0.326352
13 0 0.673648
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
18 0.484454 0.5
15 0.226682 0.0603074
14 0 0.326352
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
18 0.484454 0.5
16 0.573978 0
15 0.226682 0.0603074
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
18 0.484454 0.5
17 0.879385 0.173648
16 0.573978 0
SURF 0x10
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 1
I made a minor change to one file in the c172p that accommodates a feature I added to the navcom-kx155.xml and the dme.xml in the Instruments folder. I wanted to leave the frequencies, etc. on these dark until there was voltage applied to /systems/electrical/outputs/nav. This was accomplished by adding a param and property alias pointing to the appropriate value. Since the c172p "always" applies 28 volts, this made no change in the c172p, but allowed me to model the avionics master and battery master realisticly in pa24-electrical.nas. I put in comments explaining this at the change points. There is a useful "help > aircraft help" that walks you through the start procedure and lists the key bindings as well as the key to "light up" the hot spots.
2006-02-12 17:31:21 +00:00
refs 3
18 0.484454 0.5
9 1 0.5
17 0.879385 0.173648
kids 0
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
OBJECT group
name "clicks"
loc 0.00569378 -0.00756817 0.00125835
kids 1
OBJECT poly
name "click-R"
loc -1.86265e-09 -0.0216233 -0.00396401
crease 180.000000
numvert 4
0 -0.00702053 0.0226521
0 -0.00702053 0.0302027
0 0.00702053 0.0226521
0 0.00702053 0.0302027
numsurf 1
SURF 0x30
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 2
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
refs 4
3 0 1
1 0 0
0 0.125 0
2 0.125 1
kids 0
OBJECT group
name "clicks"
loc 0.00569378 -0.00756817 0.00125835
kids 1
OBJECT poly
name "click-L"
loc -1.86265e-09 -0.0216233 0.00388818
crease 180.000000
numvert 4
0 0.00702053 0.0302027
0 0.00702053 0.0226521
0 -0.00702053 0.0302027
0 -0.00702053 0.0226521
numsurf 1
SURF 0x30
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
mat 2
Dave PERRY: various fixes and improvements (hotspots, lighting, ...)
2007-08-05 12:38:55 +00:00
refs 4
0 0 1
2 0 0
3 0.125 0
1 0.125 1
kids 0
Dave Perry: Added GS out of range flag to Instruments-3d/vor. Century III upgrades 1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30. 2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
2009-09-18 08:58:10 +00:00
OBJECT poly
name "GS_in_range"
loc -0.00526316 -0.000915332 0.0210526
texture "GS.rgb"
crease 45.000000
numvert 4
0 -0.00503432 -0.00480549
0 -0.00503432 0.00389016
0 0.00572082 0.00389016
0 0.00572082 -0.00480549
numsurf 1
SURF 0x30
mat 0
refs 4
3 0.484375 0.828125
2 0.046875 0.828125
1 0.046875 0.109375
0 0.484375 0.109375
kids 0
Copy permalink