fgdata/Input/Joysticks/Saitek/X52-pro.xml

<?xml version="1.0"?>
<!--
  Based on X52.xml and Aviator.xml
  Modified by Arvid Norlander; 2007-12-03

  This file is released under the GPL license version 2 or later.
-->

<!--
Common Axis/Buttons
 + Roll/Pitch/Throttle/Rudder:  As There are
 + Top stick hat:               Airelon / Elevator trim
 + Bottom stick hat:            View directions (Increase/Decrease visibility & Zoom In/Out when shifted)
 + Throttle foreside hat:       Up/down: View cycles (Shift: flaps up/down). Left/right: Rudder trim
 + Throttle slider:             Boost Control (if available)
 + Trigger:                     Apply all brakes
 + Trigger (fully pressed):     Fire weapons
 + Fire button:                 Toggle parking brake
 + Stick button "A":            Gear up (Shift: gear down)
 + Stick button "B":            HUD master switch
 + Stick button "C":            Reset view (hackish) (shift: Toggle speedbrake)
 + Pinkie button:               Shift switch
 + Throttle button "D":         Right brake
 + Throttle button "E":         Left brake
 + Throttle button "i":         PTT (Push to talk, for fgcom)
 + T1/T2:                       Hook up/down (Increase/Decrease spoilers when shifted)
 + T3/T4:                       Increase/Decrease slats
 + T5/T6:                       Increase/Decrease Speedbrake (Increase/Decrease magneto when shifted)

The modes below has been selected to provide generic functions even if there is
no specific support for the current aircraft. Mode 3 is likely best if there is
support for the aircraft in question.

Mode 1: Propeller Aircraft
 + Top rotary dial:             Mixture
 + Bottom rotary dial:          Prop Advance

Mode 2: Jet Aircraft
 + Top rotary dial:             Carb Heat

Mode 3: Aircraft specific.
 Harrier:
 + Throttle:
   * Bottom "rotary dial"       Thrust vector
 Lightning:
 + Throttle:
   * Shifted "D"                Braking chute

Linux Axis Numbers (no idea about window/mac ones, and they are not same as plain X52 axis numbers on linux at least):
  0     Roll ........................................... (positive == right)
  1     Pitch .......................................... (positive == down/back/nose-up)
  2     Throttle ....................................... (positive == back/down/idle)
  3     Bottom "rotary dial" on the throttle ........... (positive == CW)
  4     Top "rotary dial" on the throttle .............. (positive == CCW)
  5     Rocker switch ("rudder" control) on the throttle (positive == right)
  6     Slider on the throttle ......................... (positive == forward)
  7     Lower right hat horizontal axis ................ (positive == right)
  8     Lower right hat vertical axis .................. (positive == down)
  9     Mouse Y (positive = up)     (Please don't use this, some of us want to map this to mouse in X)
  10    Mouse X (positive = right)  (Please don't use this, some of us want to map this to mouse in X)

Button Numbers (Probably identical b/w Linux/Windows/Mac):
 0  Trigger (half pressed)
 1  Stick top "Fire" switch
 2  Stick top "A" switch
 3  Stick top "B" switch
 4  Stick top "C" switch
 5  Stick pinkie switch
 6  Throttle "D" switch
 7  Throttle "E" switch
 8  T1
 9  T2
10  T3
11  T4
12  T5
13  T6
14  Trigger (fully pressed)
15  Throttle mouse switch (Please don't use this, some of us want to map this to mouse in X)
16  Throttle forefinger wheel scroll down
17  Throttle forefinger wheel scroll up
18  Throttle forefinger wheel click
19  Upper left hat in "up" position
20  Upper left hat in "right" position
21  Upper left hat in "down" position
22  Upper left hat in "left" position
23  Throttle forefinger hat in "up/back" position
24  Throttle forefinger hat in "right" position
25  Throttle forefinger hat in "down/forward" position
26  Throttle forefinger hat in "left" position
27  Mode 1
28  Mode 2
29  Mode 3
30  Throttle "i" switch
31  Function wheel (below MFD) click (don't use, it is for timer)
32  START/STOP (don't use, for features in joystick itself)
33  RESET (don't use, for features in joystick itself)
34  Function wheel (below MFD) up
35  Function wheel (below MFD) down
36  MFD-select wheel below MFD up
37  MFD-select wheel below MFD down
38  MFD-select wheel below MFD click

$Id$
-->
<PropertyList>

	<name>Saitek X52 Pro Flight Control System</name>
	<name>Saitek X52 Pro Flight Controller</name>
	<name>Saitek Saitek X52 Pro Flight Control System</name>

	<!-- Custom section for storing some properties, based on Aviator.xml -->
	<data>
		<modifier type="bool">false</modifier>
		<mode type="int">0</mode>
	</data>

	<nasal>
		<script>
			<![CDATA[
				var self = cmdarg().getParent();
				var data = self.getNode("data");
				var modifier  = data.getNode("modifier");
				var mode      = data.getNode("mode");
				# This does not change during a session.
				#   Not called plain "aircraft" to prevent
				#   overwriting the Nasal/aircraft.nas scope
				#   as we need to access that too from here.
				var aircraftModel  = getprop("/sim/aircraft");
			]]>
		</script>
	</nasal>

	<axis n="0">
		<desc>Aileron</desc>
		<binding>
			<command>property-scale</command>
			<property>/controls/flight/aileron</property>
			<squared type="bool">true</squared>
		</binding>
	</axis>

	<axis n="1">
		<desc>Elevator</desc>
		<binding>
			<command>property-scale</command>
			<property>/controls/flight/elevator</property>
			<factor type="double">-1.0</factor>
			<squared type="bool">true</squared>
		</binding>
	</axis>

	<!-- Axis 2 is assigned for Rudder on Mac OS X -->
	<axis n="5">
		<desc>Rudder</desc>
		<binding>
			<command>property-scale</command>
			<property>/controls/flight/rudder</property>
		</binding>
	</axis>

	<!-- Bottom stick hat -->
	<axis n="7">
		<desc>View Direction; Shift: Increase/Decrease visibility</desc>
		<low>
			<repeatable>true</repeatable>
			<binding>
				<command>nasal</command>
				<script>
					<![CDATA[
						if (modifier.getValue()) {
							fgcommand("increase-visibility");
						} else {
							view.panViewDir(1);
						}
					]]>
				</script>
			</binding>
		</low>
		<high>
			<repeatable>true</repeatable>
			<binding>
				<command>nasal</command>
				<script>
					<![CDATA[
						if (modifier.getValue()) {
							fgcommand("decrease-visibility");
						} else {
							view.panViewDir(-1);
						}
					]]>
				</script>
			</binding>
		</high>
	</axis>

	<axis n="8">
		<desc>View Elevation; Shift: Increase/Decrease field of view</desc>
		<low>
			<repeatable>true</repeatable>
			<binding>
				<command>nasal</command>
				<script>
					<![CDATA[
						if (modifier.getValue()) {
							view.increase();
						} else {
							view.panViewPitch(1);
						}
					]]>
				</script>
			</binding>
		</low>
		<high>
			<repeatable>true</repeatable>
			<binding>
				<command>nasal</command>
				<script>
					<![CDATA[
						if (modifier.getValue()) {
							view.decrease();
						} else {
							view.panViewPitch(-1);
						}
					]]>
				</script>
			</binding>
		</high>
	</axis>

	<axis n="2">
		<desc>Throttle</desc>
		<binding>
			<command>nasal</command>
			<script>controls.throttleAxis()</script>
		</binding>
	</axis>

	<!-- Top Rotary dial on the throttle -->
	<axis n="4">
		<desc>Mode1: Mixture; Mode2: Carb Heat</desc>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					var val = mode.getValue();
					if (val == 1) {
						controls.mixtureAxis();
					} elsif (val == 2) {
						controls.carbHeatAxis();
					}
				]]>
			</script>
		</binding>
	</axis>

	<!-- Bottom Rotary dial on the throttle -->
	<axis n="3">
		<desc>Mode1: Propeller Advance</desc>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					var val = mode.getValue();
					if (val == 1) {
						controls.propellerAxis(-1);
					} elsif (val == 3) {
						if (aircraftModel == "harrier") {
							controls.mixtureAxis();
						}
					}
				]]>
			</script>
		</binding>
	</axis>

	<!-- Throttle slider; Please add Unix/Windows axis number -->
	<axis n="6">
		<desc>Boost Control</desc>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					var val = cmdarg().getNode("setting").getValue();
					if (getprop("/controls/engines/engine/raw-boost") != nil) {
						# for j7w
						props.setAll("/controls/engines/engine", "raw-boost", (val+1)/2);
					} else {
						# for other prop airplanes
						props.setAll("/controls/engines/engine", "boost", (val+1)/2);
					}
				]]>
			</script>
		</binding>
	</axis>

	<!-- Buttons -->

	<!-- Trigger -->
	<button n="0">
		<desc>Brakes</desc>
		<binding>
			<command>nasal</command>
			<script>controls.applyBrakes(1)</script>
		</binding>
		<mod-up>
			<binding>
				<command>nasal</command>
				<script>controls.applyBrakes(0)</script>
			</binding>
		</mod-up>
	</button>

	<!-- Fire button -->
	<button n="1">
			<desc>Toggle parking brake on or off</desc>
			<binding>
				<command>nasal</command>
				<script>controls.applyParkingBrake(1)</script>
			</binding>
	</button>

	<!-- Button "A" -->
	<button n="2">
		<desc>Gear up; Shift: Gear down</desc>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						controls.gearDown(1);
					} else {
						controls.gearDown(-1);
					}
				]]>
			</script>
		</binding>
		<mod-up>
			<binding>
				<command>nasal</command>
				<script>controls.gearDown(0)</script>
			</binding>
		</mod-up>
	</button>

	<!-- Button "B" -->
	<button n="3">
		<desc>Cycle HUD colour</desc>
		<binding>
			<command>nasal</command>
			<script>aircraft.HUD.cycle_color()</script>
		</binding>
	</button>

	<!-- button "C" -->
	<button n="4">
		<desc>Reset View (Shift: toggle speedbrake)</desc>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						var c = getprop("/controls/flight/speedbrake");
						if (c < 0.1)
							setprop("/controls/flight/speedbrake", 1.0);
						else
							setprop("/controls/flight/speedbrake", 0.0);
					} else {
						view.resetView();
					}
				]]>
			</script>
		</binding>
	</button>

	<!-- pinkie button -->
	<button n="5">
		<desc>Shift switch for X52</desc>
		<binding>
			<command>nasal</command>
			<script>modifier.setBoolValue(1)</script>
		</binding>
		<mod-up>
			<binding>
			<command>nasal</command>
			<script>modifier.setBoolValue(0)</script>
			</binding>
		</mod-up>
	</button>

	<!-- Button "D" -->
	<button n="6">
		<desc>Right Brake</desc>
		<binding>
			<command>nasal</command>
			<script>controls.applyBrakes(1, 1)</script>
		</binding>
		<mod-up>
			<binding>
				<command>nasal</command>
				<script>
					<![CDATA[
						if (modifier.getValue()) {
							if (mode.getValue() == 3) {
								if (aircraftModel == "lightning") {
									setprop("/sim/model/lightning/controls/flight/chute_deployed", 1);
									setprop("/sim/model/lightning/controls/flight/chute_open", 1);
								}
							}
						} else {
							controls.applyBrakes(0, 1);
						}
					]]>
				</script>
			</binding>
		</mod-up>
	</button>

	<!-- Button "E" -->
	<button n="7">
		<desc>Left Brake</desc>
		<binding>
			<command>nasal</command>
			<script>controls.applyBrakes(1, -1)</script>
		</binding>
		<mod-up>
			<binding>
				<command>nasal</command>
				<script>controls.applyBrakes(0, -1)</script>
			</binding>
		</mod-up>
	</button>

	<!-- Tail hook up on button T1;  -->
	<button n="8">
		<desc>Tail hook up; Shift: Increase spoilers</desc>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						controls.stepSpoilers(1);
					} else {
						setprop("/controls/gear/tailhook", 0);
					}
				]]>
			</script>
		</binding>
	</button>

	<!-- Tail hook down on button T2 -->
	<button n="9">
		<desc>Tail hook down; Shift: Decrease spoilers</desc>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						controls.stepSpoilers(-1);
					} else {
						setprop("/controls/gear/tailhook", 1);
					}
				]]>
			</script>
		</binding>
	</button>

	<!-- Slats control on the T3/T4 -->
	<button n="10">
		<desc>Increase slats</desc>
		<binding>
			<command>nasal</command>
			<script>controls.stepSlats(1)</script>
		</binding>
	</button>

	<button n="11">
		<desc>Decrease slats</desc>
		<binding>
			<command>nasal</command>
			<script>controls.stepSlats(-1)</script>
		</binding>
	</button>

	<!-- Per mode functions on the T6/T5 -->
	<button n="12">
		<desc>Increase speedbrake; Shift: Increase Magneto</desc>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						controls.stepMagnetos(1);
					} else {
						setprop("/controls/flight/speedbrake", 1);
					}
				]]>
			</script>
		</binding>
	</button>

	<button n="13">
		<desc>Decrease speedbrake; Shift: Decrease Magneto</desc>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						controls.stepMagnetos(-1);
					} else {
						setprop("/controls/flight/speedbrake", 0);
					}
				]]>
			</script>
		</binding>
	</button>

	<!-- Button "Trigger Maximum pressed" -->
	<button n="14">
		<desc>Fire weapons</desc>
		<binding>
			<command>nasal</command>
			<script>controls.trigger(1)</script>
		</binding>
		<mod-up>
			<binding>
				<command>nasal</command>
				<script>controls.trigger(0)</script>
			</binding>
		</mod-up>
	</button>

	<!-- Trim (upper) hat on the stick -->
	<button n="19">
		<desc>Elevator trim down</desc>
		<repeatable type="bool">true</repeatable>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						setprop("/controls/flight/elevator-trim", 0);
					} else {
						controls.elevatorTrim(1);
					}
				]]>
			</script>
		</binding>
	</button>

	<button n="20">
		<desc>Aileron trim right</desc>
		<repeatable type="bool">true</repeatable>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						setprop("/controls/flight/aileron-trim", 0);
					} else {
						controls.aileronTrim(1);
					}
				]]>
			</script>
		</binding>
	</button>

	<button n="21">
		<desc>Elevator trim up</desc>
		<repeatable type="bool">true</repeatable>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						setprop("/controls/flight/elevator-trim", 0);
					} else {
						controls.elevatorTrim(-1);
					}
				]]>
			</script>
		</binding>
	</button>

	<button n="22">
		<desc>Aileron trim left</desc>
		<repeatable type="bool">true</repeatable>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						setprop("/controls/flight/aileron-trim", 0);
					} else {
						controls.aileronTrim(-1);
					}
				]]>
			</script>
		</binding>
	</button>

	<!-- Throttle foreside hat -->
	<button n="23">
		<desc>Scroll in reverse through views (shift: flaps up).</desc>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						controls.flapsDown(-1);
					} else {
						view.stepView(-1);
					}
				]]>
			</script>
		</binding>
		<mod-up>
			<binding>
				<command>nasal</command>
				<script>
					<![CDATA[
						if (modifier.getValue()) {
							controls.flapsDown(0);
						}
					]]>
				</script>
			</binding>
		</mod-up>
	</button>

	<button n="24">
		<desc>Rudder trim right</desc>
		<repeatable type="bool">true</repeatable>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						setprop("/controls/flight/rudder-trim", 0);
					} else {
						controls.rudderTrim(1);
					}
				]]>
			</script>
		</binding>
	</button>

	<button n="25">
		<desc>Scroll views (shift: flaps down).</desc>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						controls.flapsDown(1);
					} else {
						view.stepView(1);
					}
				]]>
			</script>
		</binding>
		<mod-up>
			<binding>
				<command>nasal</command>
				<script>
					<![CDATA[
						if (modifier.getValue()) {
							controls.flapsDown(0);
						}
					]]>
				</script>
			</binding>
		</mod-up>
	</button>

	<button n="26">
		<desc>Rudder trim left</desc>
		<repeatable type="bool">true</repeatable>
		<binding>
			<command>nasal</command>
			<script>
				<![CDATA[
					if (modifier.getValue()) {
						setprop("/controls/flight/rudder-trim", 0);
					} else {
						controls.rudderTrim(-1);
					}
				]]>
			</script>
		</binding>
	</button>

	<!-- mode switch (buttons 27-29) -->
	<button n="27">
		<desc>Mode 1</desc>
		<binding>
			<command>nasal</command>
			<script>mode.setIntValue(1)</script>
		</binding>
	</button>

	<button n="28">
		<desc>Mode 2</desc>
		<binding>
			<command>nasal</command>
			<script>mode.setIntValue(2)</script>
		</binding>
	</button>

	<button n="29">
		<desc>Mode 3</desc>
		<binding>
			<command>nasal</command>
			<script>mode.setIntValue(3)</script>
		</binding>
	</button>

	<!-- "i" button -->
	<button n="30">
		<desc>PTT (for fgcom)</desc>
		<binding>
			<command>nasal</command>
			<script>controls.ptt(1)</script>
		</binding>
		<mod-up>
			<binding>
				<command>nasal</command>
				<script>controls.ptt(0)</script>
			</binding>
		</mod-up>
	</button>

</PropertyList>