fly/fgdata
1
0
Fork 0
Code Activity
fgdata/Aircraft-yasim/pa28-161.xml

94 lines
4 KiB
XML
Raw Normal View History

Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
<airplane mass="1480">
<!-- Approach configuration -->
Add washout to the wings, and limit the elevator -- clean stall now happens at 50 kias, and if it's gentle, there's no wing drop (as in a real Cherokee).
2003-02-18 16:54:23 +00:00
<approach speed="45" aoa="14">
Update some YASim models to reflect the new controls changes
2003-04-01 14:44:36 +00:00
<control-setting axis="/controls/engines/engine[0]/throttle" value="0.0"/>
<control-setting axis="/controls/engines/engine[0]/mixture" value="1.0"/>
<control-setting axis="/controls/flight/flaps" value="0.0"/>
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
</approach>
<!-- Cruise configuration -->
Add washout to the wings, and limit the elevator -- clean stall now happens at 50 kias, and if it's gentle, there's no wing drop (as in a real Cherokee).
2003-02-18 16:54:23 +00:00
<cruise speed="123" alt="7000">
Update some YASim models to reflect the new controls changes
2003-04-01 14:44:36 +00:00
<control-setting axis="/controls/engines/engine[0]/throttle" value="1.0"/>
<control-setting axis="/controls/engines/engine[0]/mixture" value="0.7"/>
<control-setting axis="/controls/flight/flaps" value="0.0"/>
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
</cruise>
<cockpit x="-2.5" y=".33" z="0.6"/>
<fuselage ax="0.5" ay="0" az="0" bx="-7.75" by="0" bz="0"
width="1.5" taper="0.2" midpoint="0.3"/>
Add washout to the wings, and limit the elevator -- clean stall now happens at 50 kias, and if it's gentle, there's no wing drop (as in a real Cherokee).
2003-02-18 16:54:23 +00:00
<wing x="-2.75" y="0.6" z="-0.75" taper="0.65" incidence="2" twist="-2"
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
length="4.5" chord="1.65" sweep="0" dihedral="5" camber="0.1">
Add washout to the wings, and limit the elevator -- clean stall now happens at 50 kias, and if it's gentle, there's no wing drop (as in a real Cherokee).
2003-02-18 16:54:23 +00:00
<stall aoa="18" width="2.0" peak="1.5"/>
Increase the lift slightly for the wing flaps.
2003-02-18 17:41:29 +00:00
<flap0 start="0" end="0.5" lift="1.5" drag="1.5"/>
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
<flap1 start="0.5" end="1.0" lift="1.2" drag="1.2"/>
Update some YASim models to reflect the new controls changes
2003-04-01 14:44:36 +00:00
<control-input axis="/controls/flight/flaps" control="FLAP0"/>
<control-input axis="/controls/flight/aileron" control="FLAP1" split="true"/>
<control-input axis="/controls/flight/aileron-trim" control="FLAP1" split="true"/>
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
<control-output control="FLAP0" prop="/surface-positions/flap-pos-norm"/>
<control-output control="FLAP1" side="left"
prop="/surface-positions/left-aileron-pos-norm"/>
<control-output control="FLAP1" side="right"
prop="/surface-positions/right-aileron-pos-norm"/>
</wing>
Add washout to the wings, and limit the elevator -- clean stall now happens at 50 kias, and if it's gentle, there's no wing drop (as in a real Cherokee).
2003-02-18 16:54:23 +00:00
<hstab x="-6.5" y="0.00" z=".15" taper="1.0" effectiveness="2" incidence="-1"
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
length="1.9" chord="0.9" sweep="0">
Add washout to the wings, and limit the elevator -- clean stall now happens at 50 kias, and if it's gentle, there's no wing drop (as in a real Cherokee).
2003-02-18 16:54:23 +00:00
<stall aoa="17" width="4" peak="1.5"/>
<flap0 start="0" end="1" lift="1.65" drag="1.2"/>
Update some YASim models to reflect the new controls changes
2003-04-01 14:44:36 +00:00
<control-input axis="/controls/flight/elevator" control="FLAP0"/>
<control-input axis="/controls/flight/elevator-trim" control="FLAP0"/>
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
<control-output control="FLAP0" prop="/surface-positions/elevator-pos-norm"/>
</hstab>
<vstab x="-6.25" y="0" z=".3" taper=".5"
length="1.2" chord="1.2" sweep="10">
<stall aoa="16" width="4" peak="1.5"/>
<flap0 start="0" end="1" lift="1.3" drag="1.1"/>
Update some YASim models to reflect the new controls changes
2003-04-01 14:44:36 +00:00
<control-input axis="/controls/flight/rudder" control="FLAP0" invert="true"/>
<control-input axis="/controls/flight/rudder-trim" control="FLAP0" invert="true"/>
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
<control-output control="FLAP0" prop="/surface-positions/rudder-pos-norm"
min="1" max="-1"/>
</vstab>
<propeller radius="1.0"
cruise-speed="125" cruise-rpm="2665"
cruise-alt="8000" cruise-power="120"
takeoff-power="140.8" takeoff-rpm="2200"
eng-power="160" eng-rpm="2800"
x="-1" y="0" z="0" mass="400" moment="8">
<actionpt x="0" y="0" z="0"/>
Update some YASim models to reflect the new controls changes
2003-04-01 14:44:36 +00:00
<control-input axis="/controls/engines/engine[0]/throttle" control="THROTTLE"/>
Correct XML well-formedness errors.
2003-04-05 15:24:03 +00:00
<control-input axis="/controls/engines/engine[0]/starter" control="STARTER"/>
Update some YASim models to reflect the new controls changes
2003-04-01 14:44:36 +00:00
<control-input axis="/controls/engines/engine[0]/magnetos" control="MAGNETOS"/>
<control-input axis="/controls/engines/engine[0]/mixture" control="MIXTURE"/>
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
</propeller>
Minor adjustments.
2002-12-18 02:03:46 +00:00
<gear x="-1" y="0" z="-1.3" compression=".05"> <!-- nose -->
Update some YASim models to reflect the new controls changes
2003-04-01 14:44:36 +00:00
<control-input axis="/controls/flight/rudder" control="STEER"
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
src0="-1.0" src1="1.0"
dst0="-0.1" dst1="0.1"/>
</gear>
Minor adjustments.
2002-12-18 02:03:46 +00:00
<gear x="-2.8" y="1.5" z="-1.3" compression=".05"> <!-- left main -->
Update some YASim models to reflect the new controls changes
2003-04-01 14:44:36 +00:00
<control-input axis="/controls/gear/wheel[0]/brake" control="BRAKE" split="true"/>
<control-input axis="/controls/gear/parking-brake" control="BRAKE" split="true"/>
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
</gear>
Minor adjustments.
2002-12-18 02:03:46 +00:00
<gear x="-2.8" y="-1.5" z="-1.3" compression=".05"> <!-- left main -->
Add parking brake support
2003-06-22 08:04:33 +00:00
<control-input axis="/controls/gear/wheel[1]/brake" control="BRAKE" split="true"/>
Update some YASim models to reflect the new controls changes
2003-04-01 14:44:36 +00:00
<control-input axis="/controls/gear/parking-brake" control="BRAKE" split="true"/>
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
</gear>
<tank x="-2.5" y="1.5" z="-0.25" capacity="144"/>
<tank x="-2.5" y="-1.5" z="-0.25" capacity="144"/>
Minor adjustments.
2002-12-18 02:03:46 +00:00
<ballast x="-2.0" y="0" z="0" mass="400"/> <!-- cockpit -->
Preliminary draft of a PA28-161 (Piper Warrior II). Right now it uses a simple YASim aero model, the Cessna 2D panel, and an unanimated, untextured 3D model.
2002-12-12 18:55:58 +00:00
<weight x="-2.5" y=".33" z="0" mass-prop="/yasim/pa28/pilot-lb"/>
<weight x="-2.5" y="-.33" z="0" mass-prop="/yasim/pa28/copilot-lb"/>
</airplane>
Copy permalink