fgdata/Shaders/water_lightfield.frag

// This shader is mostly an adaptation of the shader found at
//  http://www.bonzaisoftware.com/water_tut.html and its glsl conversion
//  available at http://forum.bonzaisoftware.com/viewthread.php?tid=10
//  <20> Michael Horsch - 2005
//  Major update and revisions - 2011-10-07
//  <20> Emilian Huminiuc and Vivian Meazza

#version 120

uniform sampler2D water_normalmap;
//uniform sampler2D water_reflection;
uniform sampler2D water_dudvmap;
//uniform sampler2D water_reflection_grey;
uniform sampler2D sea_foam;
uniform sampler2D perlin_normalmap;

uniform sampler3D Noise;

uniform float saturation, Overcast, WindE, WindN;
//uniform float CloudCover0, CloudCover1, CloudCover2, CloudCover3, CloudCover4;
uniform float osg_SimulationTime;
//uniform int Status;

varying vec4 waterTex1; //moving texcoords
varying vec4 waterTex2; //moving texcoords
varying vec4 waterTex4; //viewts
//varying vec4 ecPosition;
varying vec3 viewerdir;
varying vec3 lightdir;
//varying vec3 normal;
varying vec3 specular_light;
varying vec3 relPos;

varying float earthShade;
varying float yprime_alt;
varying float mie_angle;

uniform    float WaveFreq ;
uniform    float WaveAmp ;
uniform    float WaveSharp ;
uniform    float WaveAngle ;
uniform    float WaveFactor ;
uniform    float WaveDAngle ;
uniform    float normalmap_dds;


uniform float hazeLayerAltitude;
uniform float terminator;
uniform float terrain_alt;
uniform float avisibility;
uniform float visibility;
uniform float overcast;
uniform float scattering;
uniform float ground_scattering;
uniform float eye_alt;
uniform float sea_r;
uniform float sea_g;
uniform float sea_b;

const float terminator_width = 200000.0;
const float EarthRadius = 5800000.0;
////fog "include" /////
//uniform int fogType;

vec3 fog_Func(vec3 color, int type);
//////////////////////

/////// functions /////////

void rotationmatrix(in float angle, out mat4 rotmat)
	{
	rotmat = mat4( cos( angle ), -sin( angle ), 0.0, 0.0,
		sin( angle ),  cos( angle ), 0.0, 0.0,
		0.0         ,  0.0         , 1.0, 0.0,
		0.0         ,  0.0         , 0.0, 1.0 );
	}

// wave functions ///////////////////////

struct Wave {
	float freq;  // 2*PI / wavelength
	float amp;   // amplitude
	float phase; // speed * 2*PI / wavelength
	vec2 dir;
	};

Wave wave0 = Wave(1.0, 1.0, 0.5, vec2(0.97, 0.25));
Wave wave1 = Wave(2.0, 0.5, 1.3, vec2(0.97, -0.25));
Wave wave2 = Wave(1.0, 1.0, 0.6, vec2(0.95, -0.3));
Wave wave3 = Wave(2.0, 0.5, 1.4, vec2(0.99, 0.1));

float evaluateWave(in Wave w, vec2 pos, float t)
	{
	return w.amp * sin( dot(w.dir, pos) * w.freq + t * w.phase);
	}

// derivative of wave function
float evaluateWaveDeriv(Wave w, vec2 pos, float t)
	{
	return w.freq * w.amp * cos( dot(w.dir, pos)*w.freq + t*w.phase);
	}

// sharp wave functions
float evaluateWaveSharp(Wave w, vec2 pos, float t, float k)
	{
	return w.amp * pow(sin( dot(w.dir, pos)*w.freq + t*w.phase)* 0.5 + 0.5 , k);
	}

float evaluateWaveDerivSharp(Wave w, vec2 pos, float t, float k)
	{
	return k*w.freq*w.amp * pow(sin( dot(w.dir, pos)*w.freq + t*w.phase)* 0.5 + 0.5 , k - 1) * cos( dot(w.dir, pos)*w.freq + t*w.phase);
	}

void sumWaves(float angle, float dangle, float windScale, float factor, out float ddx, float ddy)
	{
	mat4 RotationMatrix;
	float deriv;
	vec4 P = waterTex1 * 1024.0;

	rotationmatrix(radians(angle + dangle * windScale + 0.6 * sin(P.x * factor)), RotationMatrix);
	P *= RotationMatrix;

	P.y += evaluateWave(wave0, P.xz, osg_SimulationTime);
	deriv = evaluateWaveDeriv(wave0, P.xz, osg_SimulationTime );
	ddx = deriv * wave0.dir.x;
	ddy = deriv * wave0.dir.y;

	P.y += evaluateWave(wave1, P.xz, osg_SimulationTime);
	deriv = evaluateWaveDeriv(wave1, P.xz, osg_SimulationTime);
	ddx += deriv * wave1.dir.x;
	ddy += deriv * wave1.dir.y;

	P.y += evaluateWaveSharp(wave2, P.xz, osg_SimulationTime, WaveSharp);
	deriv = evaluateWaveDerivSharp(wave2, P.xz, osg_SimulationTime, WaveSharp);
	ddx += deriv * wave2.dir.x;
	ddy += deriv * wave2.dir.y;

	P.y += evaluateWaveSharp(wave3, P.xz, osg_SimulationTime, WaveSharp);
	deriv = evaluateWaveDerivSharp(wave3, P.xz, osg_SimulationTime, WaveSharp);
	ddx += deriv * wave3.dir.x;
	ddy += deriv * wave3.dir.y;
	}


float light_func (in float x, in float a, in float b, in float c, in float d, in float e)
{
x = x - 0.5;

// use the asymptotics to shorten computations
if (x > 30.0) {return e;}
if (x < -15.0) {return 0.0;}

return e / pow((1.0 + a * exp(-b * (x-c)) ),(1.0/d));
}

// this determines how light is attenuated in the distance
// physically this should be exp(-arg) but for technical reasons we use a sharper cutoff
// for distance > visibility

float fog_func (in float targ)
{


float fade_mix;

// for large altitude > 30 km, we switch to some component of quadratic distance fading to
// create the illusion of improved visibility range

targ = 1.25 * targ; // need to sync with the distance to which terrain is drawn


if (eye_alt < 30000.0)
	{return exp(-targ - targ * targ * targ * targ);}
else if (eye_alt < 50000.0)
	{
	fade_mix = (eye_alt - 30000.0)/20000.0;
	return fade_mix * exp(-targ*targ - pow(targ,4.0)) + (1.0 - fade_mix) * exp(-targ - pow(targ,4.0));
	}
else
	{
	return exp(- targ * targ - pow(targ,4.0));
	}

}

void main(void)
	{

	float dist = length(relPos);
	const vec4 sca = vec4(0.005, 0.005, 0.005, 0.005);
	const vec4 sca2 = vec4(0.02, 0.02, 0.02, 0.02);
	const vec4 tscale = vec4(0.25, 0.25, 0.25, 0.25);

	mat4 RotationMatrix;

	// compute direction to viewer
	vec3 E = normalize(viewerdir);

	// compute direction to light source
	vec3 L = lightdir; // normalize(lightdir);

	// half vector
	vec3 Hv = normalize(L + E);

	//vec3 Normal = normalize(normal);
	vec3 Normal = vec3 (0.0, 0.0, 1.0);

	const float water_shininess = 240.0;

	// approximate cloud cover
	//float cover = 0.0;
	//bool Status = true;

	float windEffect = sqrt( WindE*WindE + WindN*WindN ) * 0.6; 				//wind speed in kt
	float windScale =  15.0/(3.0 + windEffect);             											//wave scale
	float windEffect_low = 0.3 + 0.7 * smoothstep(0.0, 5.0, windEffect);    				//low windspeed wave filter
	float waveRoughness = 0.01 + smoothstep(0.0, 40.0, windEffect);						//wave roughness filter

	float mixFactor = 0.2 + 0.02 * smoothstep(0.0, 50.0, windEffect);
	//mixFactor = 0.2;
	mixFactor = clamp(mixFactor, 0.3, 0.8);

	// there's no need to do wave patterns or foam for pixels which are so far away that we can't actually see them
	// we only need detail in the near zone or where the sun reflection is

	int detail_flag;
	if ((dist > 15000.0) && (dot(normalize(vec3 (lightdir.x, lightdir.y, 0.0) ), normalize(relPos)) < 0.7 ))  {detail_flag = 0;}
	else {detail_flag = 1;}


	// sine waves
	float ddx, ddx1, ddx2, ddx3, ddy, ddy1, ddy2, ddy3;

	if (detail_flag == 1)
	{
	float angle = 0.0;

	wave0.freq = WaveFreq ;
	wave0.amp = WaveAmp;
	wave0.dir =  vec2(cos(radians(angle)), sin(radians(angle)));

	angle -= 45.0;
	wave1.freq = WaveFreq * 2.0 ;
	wave1.amp = WaveAmp * 1.25;
	wave1.dir =  vec2(cos(radians(angle)), sin(radians(angle)));

	angle += 30.0;
	wave2.freq = WaveFreq * 3.5;
	wave2.amp = WaveAmp * 0.75;
	wave2.dir =  vec2(cos(radians(angle)), sin(radians(angle)));

	angle -= 50.0;
	wave3.freq = WaveFreq * 3.0 ;
	wave3.amp = WaveAmp * 0.75;
	wave3.dir =  vec2(cos(radians(angle)), sin(radians(angle)));

	// sum waves

	ddx = 0.0, ddy = 0.0;
	sumWaves(WaveAngle, -1.5, windScale, WaveFactor, ddx, ddy);

	ddx1 = 0.0, ddy1 = 0.0;
	sumWaves(WaveAngle, 1.5, windScale, WaveFactor, ddx1, ddy1);

	//reset the waves
	angle = 0.0;
	float waveamp = WaveAmp * 0.75;

	wave0.freq = WaveFreq ;
	wave0.amp = waveamp;
	wave0.dir =  vec2(cos(radians(angle)), sin(radians(angle)));

	angle -= 20.0;
	wave1.freq = WaveFreq * 2.0 ;
	wave1.amp = waveamp * 1.25;
	wave1.dir =  vec2(cos(radians(angle)), sin(radians(angle)));

	angle += 35.0;
	wave2.freq = WaveFreq * 3.5;
	wave2.amp = waveamp * 0.75;
	wave2.dir =  vec2(cos(radians(angle)), sin(radians(angle)));

	angle -= 45.0;
	wave3.freq = WaveFreq * 3.0 ;
	wave3.amp = waveamp * 0.75;
	wave3.dir =  vec2(cos(radians(angle)), sin(radians(angle)));

	ddx2 = 0.0, ddy2 = 0.0;
	sumWaves(WaveAngle + WaveDAngle, -1.5, windScale, WaveFactor, ddx2, ddy2);

	ddx3 = 0.0, ddy3 = 0.0;
	sumWaves(WaveAngle + WaveDAngle, 1.5, windScale, WaveFactor, ddx3, ddy3);
	}
	// end sine stuff

	//cover = 5.0 * smoothstep(0.6, 1.0, scattering);
	//cover = 5.0 * ground_scattering;

	vec4 viewt = normalize(waterTex4);

	vec4 disdis = texture2D(water_dudvmap, vec2(waterTex2 * tscale)* windScale) * 2.0 - 1.0;

	vec4 vNorm;


	//normalmaps
	vec4 nmap   = texture2D(water_normalmap, vec2(waterTex1 + disdis * sca2) * windScale) * 2.0 - 1.0;
	vec4 nmap1  = texture2D(perlin_normalmap, vec2(waterTex1 + disdis * sca2) * windScale) * 2.0 - 1.0;

	rotationmatrix(radians(3.0 * sin(osg_SimulationTime * 0.0075)), RotationMatrix);
	nmap  += texture2D(water_normalmap, vec2(waterTex2 * RotationMatrix * tscale) * windScale) * 2.0 - 1.0;
	nmap1 += texture2D(perlin_normalmap, vec2(waterTex2 * RotationMatrix * tscale) * windScale) * 2.0 - 1.0;

	nmap  *= windEffect_low;
	nmap1 *= windEffect_low;

	// mix water and noise, modulated by factor
	vNorm = normalize(mix(nmap, nmap1, mixFactor) * waveRoughness);
	if (detail_flag == 1)	{vNorm.r += ddx + ddx1 + ddx2 + ddx3;}

	if (normalmap_dds > 0)
        vNorm = -vNorm; //dds fix

	//load reflection

	vec4 refl ;

	refl.r = sea_r;
	refl.g = sea_g;
	refl.b = sea_b;
	refl.a = 1.0;


	float intensity;
	// de-saturate for reduced light
	refl.rgb = mix(refl.rgb,  vec3 (0.248, 0.248, 0.248), 1.0 - smoothstep(0.3, 0.7, ground_scattering));

  	// de-saturate light for overcast haze
	intensity = length(refl.rgb);
	refl.rgb = mix(refl.rgb,  intensity * vec3 (1.0, 1.0, 1.0), smoothstep(0.1, 0.8, overcast));

	vec3 N;

	if (detail_flag == 1)
	{

	vec3 N0 = vec3(texture2D(water_normalmap, vec2(waterTex1 + disdis * sca2) * windScale) * 2.0 - 1.0);
	vec3 N1 = vec3(texture2D(perlin_normalmap, vec2(waterTex1 + disdis * sca) * windScale) * 2.0 - 1.0);

	N0 += vec3(texture2D(water_normalmap, vec2(waterTex1 * tscale) * windScale) * 2.0 - 1.0);
	N1 += vec3(texture2D(perlin_normalmap, vec2(waterTex2 * tscale) * windScale) * 2.0 - 1.0);

	rotationmatrix(radians(2.0 * sin(osg_SimulationTime * 0.005)), RotationMatrix);
	N0 += vec3(texture2D(water_normalmap, vec2(waterTex2 * RotationMatrix * (tscale + sca2)) * windScale) * 2.0 - 1.0);
	N1 += vec3(texture2D(perlin_normalmap, vec2(waterTex2 * RotationMatrix * (tscale + sca2)) * windScale) * 2.0 - 1.0);

	rotationmatrix(radians(-4.0 * sin(osg_SimulationTime * 0.003)), RotationMatrix);
	N0 += vec3(texture2D(water_normalmap, vec2(waterTex1 * RotationMatrix + disdis * sca2) * windScale) * 2.0 - 1.0);
	N1 += vec3(texture2D(perlin_normalmap, vec2(waterTex1 * RotationMatrix + disdis * sca) * windScale) * 2.0 - 1.0);

	N0 *= windEffect_low;
	N1 *= windEffect_low;

	N0.r += (ddx + ddx1 + ddx2 + ddx3);
	N0.g += (ddy + ddy1 + ddy2 + ddy3);

	N = normalize(mix(Normal + N0, Normal + N1, mixFactor) * waveRoughness);

	if (normalmap_dds > 0)
        N = -N; //dds fix
	}
	else
	{N = vec3 (0.0, 0.0, 1.0);}

    	//float lightArg = (terminator-yprime_alt)/100000.0;




	vec3 specular_color = vec3(specular_light)
		* pow(max(0.0, dot(N, Hv)), water_shininess) * 6.0;
	vec4 specular = vec4(specular_color, 0.5);

	specular = specular * saturation * 0.3  * earthShade  ;

	//calculate fresnel
	vec4 invfres = vec4( dot(vNorm, viewt) );
	vec4 fres = vec4(1.0) + invfres;
	refl *= fres;



	vec4 ambient_light;

	ambient_light.rgb = specular_light.rgb;
   	ambient_light.a = 1.0;


	vec4 finalColor;

	//if(cover >= 1.5)
	//if (ground_scattering > 0.4)
	//	{
	//	finalColor = refl + specular;
	//	} else {
	//		finalColor = refl;
	//	}

	finalColor = refl + specular * smoothstep(0.3, 0.6, ground_scattering);

	//add foam

	if (dist < 10000.0)
	{
	float foamSlope = 0.10 + 0.1 * windScale;


	vec4 foam_texel = texture2D(sea_foam, vec2(waterTex2 * tscale) * 25.0);
	float waveSlope = N.g;

	if (windEffect >= 8.0)
		if (waveSlope >= foamSlope){
			finalColor = mix(finalColor, max(finalColor, finalColor + foam_texel), smoothstep(0.01, 0.50, N.g));
			}
	}



		finalColor *= ambient_light;



// here comes the terrain haze model


float delta_z = hazeLayerAltitude - eye_alt;



if (dist > 40.0)
{


float transmission;
float vAltitude;
float delta_zv;
float H;
float distance_in_layer;
float transmission_arg;


// angle with horizon
float ct = dot(vec3(0.0, 0.0, 1.0), relPos)/dist;


// we solve the geometry what part of the light path is attenuated normally and what is through the haze layer

if (delta_z > 0.0) // we're inside the layer
	{
	if (ct < 0.0) // we look down
		{
		distance_in_layer = dist;
		//lambda = visibility;
		vAltitude = min(distance_in_layer,min(visibility,avisibility)) * ct;
  		delta_zv = delta_z - vAltitude;
		}
	else 	// we may look through upper layer edge
		{
		H = dist * ct;
		if (H > delta_z) {distance_in_layer = dist/H * delta_z;}
		else {distance_in_layer = dist;}
		//lambda = visibility;
		vAltitude = min(distance_in_layer,visibility) * ct;
  		delta_zv = delta_z - vAltitude;
		}
	}
  else // we see the layer from above, delta_z < 0.0
	{
	H = dist * -ct;
	if (H  < (-delta_z)) // we don't see into the layer at all, aloft visibility is the only fading
		{
		distance_in_layer = 0.0;
		delta_zv = 0.0;
		}
	else
		{
		vAltitude = H + delta_z;
		distance_in_layer = vAltitude/H * dist;
		vAltitude = min(distance_in_layer,visibility) * (-ct);
		delta_zv = vAltitude;
		}
	}


// ground haze cannot be thinner than aloft visibility in the model,
// so we need to use aloft visibility otherwise


transmission_arg = (dist-distance_in_layer)/avisibility;


float eqColorFactor;


if (visibility < avisibility)
	{
	transmission_arg = transmission_arg + (distance_in_layer/visibility);
	// this combines the Weber-Fechner intensity
	eqColorFactor = 1.0 - 0.1 * delta_zv/visibility - (1.0 -scattering);

	}
else
	{
	transmission_arg = transmission_arg + (distance_in_layer/avisibility);
	// this combines the Weber-Fechner intensity
	eqColorFactor = 1.0 - 0.1 * delta_zv/avisibility - (1.0 -scattering);
	}


transmission =  fog_func(transmission_arg);

// there's always residual intensity, we should never be driven to zero
if (eqColorFactor < 0.2) eqColorFactor = 0.2;


float lightArg = (terminator-yprime_alt)/100000.0;

vec3 hazeColor;
//hazeColor.rgb = specular_light.rgb;
hazeColor.b = light_func(lightArg, 1.330e-05, 0.264, 2.527, 1.08e-05, 1.0);
hazeColor.g = light_func(lightArg, 3.931e-06, 0.264, 3.827, 7.93e-06, 1.0);
hazeColor.r = light_func(lightArg, 8.305e-06, 0.161, 3.827, 3.04e-05, 1.0);

// now dim the light for haze
float eShade = 0.9 * smoothstep(terminator_width+ terminator, -terminator_width + terminator, yprime_alt) + 0.1;

// Mie-like factor

if (lightArg < 5.0)
	{intensity = length(hazeColor);
	float mie_magnitude = 0.5 * smoothstep(350000.0, 150000.0, terminator-sqrt(2.0 * EarthRadius * terrain_alt));
	hazeColor = intensity * ((1.0 - mie_magnitude) + mie_magnitude * mie_angle) * normalize(mix(hazeColor,  vec3 (0.5, 0.58, 0.65), mie_magnitude * (0.5 - 0.5 * mie_angle)) );
	}

// high altitude desaturation of the haze color

intensity = length(hazeColor);
hazeColor = intensity * normalize (mix(hazeColor, intensity * vec3 (1.0,1.0,1.0), 0.7* smoothstep(5000.0, 50000.0, eye_alt)));

// blue hue of haze

hazeColor.x = hazeColor.x * 0.83;
hazeColor.y = hazeColor.y * 0.9;


// additional blue in indirect light
float fade_out = max(0.65 - 0.3 *overcast, 0.45);
intensity = length(hazeColor);
hazeColor = intensity * normalize(mix(hazeColor,  1.5* vec3 (0.45, 0.6, 0.8), 1.0 -smoothstep(0.25, fade_out,eShade) ));

// change haze color to blue hue for strong fogging
//intensity = length(hazeColor);
hazeColor = intensity * normalize(mix(hazeColor,  2.0 * vec3 (0.55, 0.6, 0.8), (1.0-smoothstep(0.3,0.8,eqColorFactor))));


// reduce haze intensity when looking at shaded surfaces, only in terminator region

//float shadow = mix( min(1.0 + dot(normal,lightdir),1.0), 1.0, 1.0-smoothstep(0.1, 0.4, transmission));
//hazeColor = mix(shadow * hazeColor, hazeColor, 0.3 + 0.7* smoothstep(250000.0, 400000.0, terminator));

	finalColor.rgb = mix(eqColorFactor * hazeColor * eShade, finalColor.rgb,transmission);


	}
		gl_FragColor = finalColor;

}