fgdata/Aircraft/Instruments-3d/primus-1000/primus1000-pfd-hotspots.xml

<!--
Syd Adams

Primus 1000 PFD  hotspots
-->

<PropertyList>

  <name>PFD hotspots</name>
  <w-base>180</w-base>
  <h-base>240</h-base>
  <w>180</w>
  <h>240</h>

  <layers>
  </layers>
 <actions>
   
   <!--  *************      SELECT BARO  /  RA MODE     *****************-->
<!--
   <action>
     <name>bezel outline</name>
     <button>0</button>
     <x>-90</x>
     <y>-120</y>
     <w>180</w>
     <h>240</h>
   </action>
-->
   
   <action>
     <name>select ra / baro alt mode</name>
     <button>0</button>
     <x>-58</x>
     <y>-103</y>
     <w>18</w>
     <h>12</h>
     <binding>
       <command>property-toggle</command>
       <property>/instrumentation/primus1000/ra-mode</property>
       <min>0</min>
       <max>1</max>
     </binding>
   </action>

   <!--                  reset baro -->

   <action>
     <name>reset inhg</name>
     <button>0</button>
     <x>44</x>
     <y>-103</y>
     <w>18</w>
     <h>12</h>
     <binding>
       <command>property-assign</command>
       <property>instrumentation/altimeter/setting-inhg</property>
       <value>29.92</value>
     </binding>
   </action>

   <!--       adjust    inhg          -->
   <action>
     <name>calibrate inhg down fine</name>
     <button>0</button>
     <x>67</x>
     <y>-110</y>
     <w>8</w>
     <h>14</h>
     <binding>
       <command>property-adjust</command>
       <property>/instrumentation/altimeter/setting-inhg</property>
       <step>-0.01</step>
       <min>26.0</min>
       <max>33.0</max>
       <wrap>false</wrap>
     </binding>
   </action>
   
   <action>
     <name>calibrate inhg down coarse</name>
     <button>1</button>
     <x>67</x>
     <y>-110</y>
     <w>8</w>
     <h>14</h>
     <binding>
       <command>property-adjust</command>
       <property>/instrumentation/altimeter/setting-inhg</property>
       <step>-0.1</step>
       <min>26.0</min>
       <max>33.0</max>
       <wrap>false</wrap>
     </binding>
   </action>
   
   <action>
     <name>calibrate inhg up fine</name>
     <button>0</button>
     <x>75</x>
     <y>-110</y>
     <w>8</w>
     <h>14</h>
     <binding>
       <command>property-adjust</command>
       <property>/instrumentation/altimeter/setting-inhg</property>
       <step>0.01</step>
       <min>26.0</min>
       <max>33.0</max>
       <wrap>false</wrap>
     </binding>
   </action>
   
   <action>
     <name>calibrate inhg up coarse</name>
     <button>1</button>
     <x>75</x>
     <y>-110</y>
     <w>8</w>
     <h>14</h>
     <binding>
       <command>property-adjust</command>
       <property>/instrumentation/altimeter/setting-inhg</property>
       <step>0.1</step>
       <min>26.0</min>
       <max>33.0</max>
       <wrap>false</wrap>
     </binding>
   </action>

   
 </actions>
</PropertyList>