IDG-A32X/Models/Instruments/Lower-ECAM/Lower-ECAM.nas

# A3XX Lower ECAM Canvas
# Joshua Davidson (it0uchpods)

##############################################
# Copyright (c) Joshua Davidson (it0uchpods) #
##############################################

var lowerECAM_apu = nil;
var lowerECAM_bleed = nil;
var lowerECAM_cond = nil;
var lowerECAM_door = nil;
var lowerECAM_elec = nil;
var lowerECAM_eng = nil;
var lowerECAM_fctl = nil;
var lowerECAM_fuel = nil;
var lowerECAM_hyd = nil;
var lowerECAM_press = nil;
var lowerECAM_status = nil;
var lowerECAM_wheel = nil;
var lowerECAM_test = nil;
var lowerECAM_display = nil;
var page = "fctl";
var oat = getprop("/environment/temperature-degc");
var blue_psi = 0;
var green_psi = 0;
var yellow_psi = 0;
var autobrakemode = 0;
var nosegear = 0;
var leftgear = 0;
var rightgear = 0;
var leftdoor = 0;
var rightdoor = 0;
var nosedoor = 0;
var gearlvr = 0;
var askidsw = 0;
var brakemode = 0;
var accum = 0;
var elapsedtime = 0;
var tr1_v = 0;
var tr1_a = 0;
var tr2_v = 0;
var tr2_a = 0;
setprop("/systems/electrical/extra/apu-load", 0);
setprop("/systems/electrical/extra/apu-volts", 0);
setprop("/systems/electrical/extra/apu-hz", 0);
setprop("/systems/pneumatic/bleedapu", 0);
setprop("/engines/engine[0]/oil-psi-actual", 0);
setprop("/engines/engine[1]/oil-psi-actual", 0);
setprop("/ECAM/Lower/door-left", 0);
setprop("/ECAM/Lower/door-right", 0);
setprop("/ECAM/Lower/door-nose-left", 0);
setprop("/ECAM/Lower/door-nose-right", 0);
setprop("/ECAM/Lower/APU-N", 0);
setprop("/ECAM/Lower/APU-EGT", 0);
setprop("/ECAM/Lower/Oil-QT[0]", 0);
setprop("/ECAM/Lower/Oil-QT[1]", 0);
setprop("/ECAM/Lower/Oil-PSI[0]", 0);
setprop("/ECAM/Lower/Oil-PSI[1]", 0);
setprop("/ECAM/Lower/aileron-ind-left", 0);
setprop("/ECAM/Lower/aileron-ind-right", 0);
setprop("/ECAM/Lower/elevator-ind-left", 0);
setprop("/ECAM/Lower/elevator-ind-right", 0);
setprop("/ECAM/Lower/elevator-trim-deg", 0);
setprop("/controls/flight/rudder-fdm", 0);
setprop("/environment/temperature-degc", 0);
setprop("/FMGC/internal/gw", 0);
setprop("/controls/flight/spoiler-l1-failed", 0);
setprop("/controls/flight/spoiler-l2-failed", 0);
setprop("/controls/flight/spoiler-l3-failed", 0);
setprop("/controls/flight/spoiler-l4-failed", 0);
setprop("/controls/flight/spoiler-l5-failed", 0);
setprop("/controls/flight/spoiler-r1-failed", 0);
setprop("/controls/flight/spoiler-r2-failed", 0);
setprop("/controls/flight/spoiler-r3-failed", 0);
setprop("/controls/flight/spoiler-r4-failed", 0);
setprop("/controls/flight/spoiler-r5-failed", 0);
setprop("/instrumentation/du/du4-test", 0);
setprop("/instrumentation/du/du4-test-time", 0);
setprop("/instrumentation/du/du4-test-amount", 0);

var canvas_lowerECAM_base = {
	init: func(canvas_group, file) {
		var font_mapper = func(family, weight) {
			return "LiberationFonts/LiberationSans-Regular.ttf";
		};

		canvas.parsesvg(canvas_group, file, {"font-mapper": font_mapper});

		var svg_keys = me.getKeys();
		foreach(var key; svg_keys) {
			me[key] = canvas_group.getElementById(key);
		}

		me.page = canvas_group;

		return me;
	},
	getKeys: func() {
		return [];
	},
	update: func() {
		elapsedtime = getprop("/sim/time/elapsed-sec");
		if (getprop("/systems/electrical/bus/ac2") >= 110) {
			if (getprop("/systems/acconfig/autoconfig-running") != 1 and getprop("/instrumentation/du/du4-test") != 1) {
				setprop("/instrumentation/du/du4-test", 1);
				setprop("/instrumentation/du/du4-test-amount", math.round((rand() * 5 ) + 35, 0.1));
				setprop("/instrumentation/du/du4-test-time", getprop("/sim/time/elapsed-sec"));
			} else if (getprop("/systems/acconfig/autoconfig-running") == 1 and getprop("/instrumentation/du/du4-test") != 1) {
				setprop("/instrumentation/du/du4-test", 1);
				setprop("/instrumentation/du/du4-test-amount", math.round((rand() * 5 ) + 35, 0.1));
				setprop("/instrumentation/du/du4-test-time", getprop("/sim/time/elapsed-sec") - 30);
			}
		} else if (getprop("/systems/electrical/ac1-src") == "XX" or getprop("/systems/electrical/ac2-src") == "XX") {
			setprop("/instrumentation/du/du4-test", 0);
		}
		
		if (getprop("/systems/electrical/bus/ac2") >= 110 and getprop("/controls/lighting/DU/du4") > 0) {
			if (getprop("/instrumentation/du/du4-test-time") + getprop("/instrumentation/du/du4-test-amount") >= elapsedtime) {
				lowerECAM_apu.page.hide();
				lowerECAM_bleed.page.hide();
				lowerECAM_cond.page.hide();
				lowerECAM_door.page.hide();
				lowerECAM_elec.page.hide();
				lowerECAM_eng.page.hide();
				lowerECAM_fctl.page.hide();
				lowerECAM_fuel.page.hide();
				lowerECAM_press.page.hide();
				lowerECAM_status.page.hide();
				lowerECAM_wheel.page.hide();
				lowerECAM_test.page.show();
				lowerECAM_test.update();
			} else {
				lowerECAM_test.page.hide();
				page = getprop("/ECAM/Lower/page");
				if (page == "apu") {
					lowerECAM_apu.page.show();
					lowerECAM_bleed.page.hide();
					lowerECAM_cond.page.hide();
					lowerECAM_door.page.hide();
					lowerECAM_elec.page.hide();
					lowerECAM_eng.page.hide();
					lowerECAM_fctl.page.hide();
					lowerECAM_fuel.page.hide();
					lowerECAM_press.page.hide();
					lowerECAM_status.page.hide();
					lowerECAM_hyd.page.hide();
					lowerECAM_wheel.page.hide();
					lowerECAM_apu.update();
				} else if (page == "bleed") {
					lowerECAM_apu.page.hide();
					lowerECAM_bleed.page.show();
					lowerECAM_cond.page.hide();
					lowerECAM_door.page.hide();
					lowerECAM_elec.page.hide();
					lowerECAM_eng.page.hide();
					lowerECAM_fctl.page.hide();
					lowerECAM_fuel.page.hide();
					lowerECAM_press.page.hide();
					lowerECAM_status.page.hide();
					lowerECAM_hyd.page.hide();
					lowerECAM_wheel.page.hide();
					lowerECAM_bleed.update();
				} else if (page == "cond") {
					lowerECAM_apu.page.hide();
					lowerECAM_bleed.page.hide();
					lowerECAM_cond.page.show();
					lowerECAM_door.page.hide();
					lowerECAM_elec.page.hide();
					lowerECAM_eng.page.hide();
					lowerECAM_fctl.page.hide();
					lowerECAM_fuel.page.hide();
					lowerECAM_press.page.hide();
					lowerECAM_status.page.hide();
					lowerECAM_hyd.page.hide();
					lowerECAM_wheel.page.hide();
					lowerECAM_cond.update();
				} else if (page == "door") {
					lowerECAM_apu.page.hide();
					lowerECAM_bleed.page.hide();
					lowerECAM_cond.page.hide();
					lowerECAM_door.page.show();
					lowerECAM_elec.page.hide();
					lowerECAM_eng.page.hide();
					lowerECAM_fctl.page.hide();
					lowerECAM_fuel.page.hide();
					lowerECAM_press.page.hide();
					lowerECAM_status.page.hide();
					lowerECAM_hyd.page.hide();
					lowerECAM_wheel.page.hide();
					lowerECAM_door.update();
				} else if (page == "elec") {
					lowerECAM_apu.page.hide();
					lowerECAM_bleed.page.hide();
					lowerECAM_cond.page.hide();
					lowerECAM_door.page.hide();
					lowerECAM_elec.page.show();
					lowerECAM_eng.page.hide();
					lowerECAM_fctl.page.hide();
					lowerECAM_fuel.page.hide();
					lowerECAM_press.page.hide();
					lowerECAM_status.page.hide();
					lowerECAM_hyd.page.hide();
					lowerECAM_wheel.page.hide();
					lowerECAM_elec.update();
				} else if (page == "eng") {
					lowerECAM_apu.page.hide();
					lowerECAM_bleed.page.hide();
					lowerECAM_cond.page.hide();
					lowerECAM_door.page.hide();
					lowerECAM_elec.page.hide();
					lowerECAM_eng.page.show();
					lowerECAM_fctl.page.hide();
					lowerECAM_fuel.page.hide();
					lowerECAM_press.page.hide();
					lowerECAM_status.page.hide();
					lowerECAM_hyd.page.hide();
					lowerECAM_wheel.page.hide();
					lowerECAM_eng.update();
				} else if (page == "fctl") {
					lowerECAM_apu.page.hide();
					lowerECAM_bleed.page.hide();
					lowerECAM_cond.page.hide();
					lowerECAM_door.page.hide();
					lowerECAM_elec.page.hide();
					lowerECAM_eng.page.hide();
					lowerECAM_fctl.page.show();
					lowerECAM_fuel.page.hide();
					lowerECAM_press.page.hide();
					lowerECAM_status.page.hide();
					lowerECAM_hyd.page.hide();
					lowerECAM_wheel.page.hide();
					lowerECAM_fctl.update();
				} else if (page == "fuel") {
					lowerECAM_apu.page.hide();
					lowerECAM_bleed.page.hide();
					lowerECAM_cond.page.hide();
					lowerECAM_door.page.hide();
					lowerECAM_elec.page.hide();
					lowerECAM_eng.page.hide();
					lowerECAM_fctl.page.hide();
					lowerECAM_fuel.page.show();
					lowerECAM_press.page.hide();
					lowerECAM_status.page.hide();
					lowerECAM_hyd.page.hide();
					lowerECAM_wheel.page.hide();
					lowerECAM_fuel.update();
				} else if (page == "press") {
					lowerECAM_apu.page.hide();
					lowerECAM_bleed.page.hide();
					lowerECAM_cond.page.hide();
					lowerECAM_door.page.hide();
					lowerECAM_elec.page.hide();
					lowerECAM_eng.page.hide();
					lowerECAM_fctl.page.hide();
					lowerECAM_fuel.page.hide();
					lowerECAM_press.page.show();
					lowerECAM_status.page.hide();
					lowerECAM_hyd.page.hide();
					lowerECAM_wheel.page.hide();
					lowerECAM_press.update();
				} else if (page == "sts") {
					lowerECAM_apu.page.hide();
					lowerECAM_bleed.page.hide();
					lowerECAM_cond.page.hide();
					lowerECAM_door.page.hide();
					lowerECAM_elec.page.hide();
					lowerECAM_eng.page.hide();
					lowerECAM_fctl.page.hide();
					lowerECAM_fuel.page.hide();
					lowerECAM_press.page.hide();
					lowerECAM_status.page.show();
					lowerECAM_hyd.page.hide();
					lowerECAM_wheel.page.hide();
					lowerECAM_status.update();
				} else if (page == "hyd") {
					lowerECAM_apu.page.hide();
					lowerECAM_bleed.page.hide();
					lowerECAM_cond.page.hide();
					lowerECAM_door.page.hide();
					lowerECAM_elec.page.hide();
					lowerECAM_eng.page.hide();
					lowerECAM_fctl.page.hide();
					lowerECAM_fuel.page.hide();
					lowerECAM_press.page.hide();
					lowerECAM_status.page.hide();
					lowerECAM_hyd.page.show();
					lowerECAM_wheel.page.hide();
					lowerECAM_hyd.update();
				} else if (page == "wheel") {
					lowerECAM_apu.page.hide();
					lowerECAM_bleed.page.hide();
					lowerECAM_cond.page.hide();
					lowerECAM_door.page.hide();
					lowerECAM_elec.page.hide();
					lowerECAM_eng.page.hide();
					lowerECAM_fctl.page.hide();
					lowerECAM_fuel.page.hide();
					lowerECAM_press.page.hide();
					lowerECAM_status.page.hide();
					lowerECAM_hyd.page.hide();
					lowerECAM_wheel.page.show();
					lowerECAM_wheel.update();
				} else {
					lowerECAM_apu.page.hide();
					lowerECAM_bleed.page.hide();
					lowerECAM_cond.page.hide();
					lowerECAM_door.page.hide();
					lowerECAM_elec.page.hide();
					lowerECAM_eng.page.hide();
					lowerECAM_fctl.page.hide();
					lowerECAM_fuel.page.hide();
					lowerECAM_press.page.hide();
					lowerECAM_status.page.hide();
					lowerECAM_hyd.page.hide();
					lowerECAM_wheel.page.hide();
				}
			}
		} else {
			lowerECAM_test.page.hide();
			lowerECAM_apu.page.hide();
			lowerECAM_bleed.page.hide();
			lowerECAM_cond.page.hide();
			lowerECAM_door.page.hide();
			lowerECAM_elec.page.hide();
			lowerECAM_eng.page.hide();
			lowerECAM_fctl.page.hide();
			lowerECAM_fuel.page.hide();
			lowerECAM_press.page.hide();
			lowerECAM_status.page.hide();
			lowerECAM_hyd.page.hide();
			lowerECAM_wheel.page.hide();
		}
	},
	updateBottomStatus: func() {
		me["TAT"].setText(sprintf("%2.0f", getprop("/environment/temperature-degc")));
		me["SAT"].setText(sprintf("%2.0f", getprop("/environment/temperature-degc")));
		me["GW"].setText(sprintf("%s", math.round(getprop("/FMGC/internal/gw"))));
		me["UTCh"].setText(sprintf("%02d", getprop("/sim/time/utc/hour")));
		me["UTCm"].setText(sprintf("%02d", getprop("/sim/time/utc/minute")));
	},
};

var canvas_lowerECAM_apu = {
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_apu, canvas_lowerECAM_base]};
		m.init(canvas_group, file);

		return m;
	},
	getKeys: func() {
		return ["TAT","SAT","GW","UTCh","UTCm","APUN-needle","APUEGT-needle","APUN","APUEGT","APUAvail","APUFlapOpen","APUBleedValve","APUBleedOnline","APUGenOnline","APUGentext","APUGenLoad","APUGenbox","APUGenVolt","APUGenHz","APUBleedPSI","APUfuelLO",
		"text3724","text3728","text3732"];
	},
	update: func() {
		oat = getprop("/environment/temperature-degc");
		
		# Avail and Flap Open
		if (getprop("/systems/apu/flap") == 1) {
			me["APUFlapOpen"].show();
		} else {
			me["APUFlapOpen"].hide();
		}

		if (getprop("/systems/apu/rpm") > 94.9) {
			me["APUAvail"].show();
		} else {
			me["APUAvail"].hide();
		}
		
		if (getprop("/fdm/jsbsim/propulsion/tank[2]/contents-lbs") < 100) {
			me["APUfuelLO"].show();
		} else {
			me["APUfuelLO"].hide();
		}
		
		# APU Gen
		if (getprop("/systems/electrical/extra/apu-volts") > 110) {
			me["APUGenVolt"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["APUGenVolt"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/systems/electrical/extra/apu-hz") > 380) {
			me["APUGenHz"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["APUGenHz"].setColor(0.7333,0.3803,0);
		}
		
		if (getprop("/controls/APU/master") == 1 or getprop("/systems/apu/rpm") >= 94.9) {
			me["APUGenbox"].show();
			me["APUGenHz"].show();
			me["APUGenVolt"].show();
			me["APUGenLoad"].show();
			me["text3724"].show();
			me["text3728"].show();
			me["text3732"].show();
		} else {
			me["APUGenbox"].hide();
			me["APUGenHz"].hide();
			me["APUGenVolt"].hide();
			me["APUGenLoad"].hide();
			me["text3724"].hide();
			me["text3728"].hide();
			me["text3732"].hide();
		}
		
		if ((getprop("/systems/apu/rpm") > 94.9) and (getprop("/controls/electrical/switches/gen-apu") == 1)) {
			me["APUGenOnline"].show();
		} else {
			me["APUGenOnline"].hide();
		}
		
		if ((getprop("/controls/APU/master") == 0) or ((getprop("/controls/APU/master") == 1) and (getprop("/controls/electrical/switches/gen-apu") == 1) and (getprop("/systems/apu/rpm") > 94.9))) {
			me["APUGentext"].setColor(0.8078,0.8039,0.8078);
		} else if ((getprop("/controls/APU/master") == 1) and (getprop("/controls/electrical/switches/gen-apu") == 0) and (getprop("/systems/apu/rpm") < 94.9)) { 
			me["APUGentext"].setColor(0.7333,0.3803,0);
		}

		me["APUGenLoad"].setText(sprintf("%s", math.round(getprop("/systems/electrical/extra/apu-load"))));
		me["APUGenVolt"].setText(sprintf("%s", math.round(getprop("/systems/electrical/extra/apu-volts"))));
		me["APUGenHz"].setText(sprintf("%s", math.round(getprop("/systems/electrical/extra/apu-hz"))));

		# APU Bleed
		if (getprop("/controls/adirs/ir[1]/knob") != 1 and (getprop("/controls/APU/master") == 1 or getprop("/systems/pneumatic/bleedapu") > 0)) {
			me["APUBleedPSI"].setColor(0.0509,0.7529,0.2941);
			me["APUBleedPSI"].setText(sprintf("%s", math.round(getprop("/systems/pneumatic/bleedapu"))));
		} else {
			me["APUBleedPSI"].setColor(0.7333,0.3803,0);
			me["APUBleedPSI"].setText(sprintf("%s", "XX"));
		}

		if (getprop("/controls/pneumatic/switches/bleedapu") == 1) {
			me["APUBleedValve"].setRotation(90 * D2R);
			me["APUBleedOnline"].show();
		} else {
			me["APUBleedValve"].setRotation(0);
			me["APUBleedOnline"].hide();
		}

		# APU N and EGT
		if (getprop("/controls/APU/master") == 1) {
			me["APUN"].setColor(0.0509,0.7529,0.2941);
			me["APUN"].setText(sprintf("%s", math.round(getprop("/systems/apu/rpm"))));
			me["APUEGT"].setColor(0.0509,0.7529,0.2941);
			me["APUEGT"].setText(sprintf("%s", math.round(getprop("/systems/apu/egt"))));
		} else if (getprop("/systems/apu/rpm") >= 1) {
			me["APUN"].setColor(0.0509,0.7529,0.2941);
			me["APUN"].setText(sprintf("%s", math.round(getprop("/systems/apu/rpm"))));
			me["APUEGT"].setColor(0.0509,0.7529,0.2941);
			me["APUEGT"].setText(sprintf("%s", math.round(getprop("/systems/apu/egt"))));
		} else {
			me["APUN"].setColor(0.7333,0.3803,0);
			me["APUN"].setText(sprintf("%s", "XX"));
			me["APUEGT"].setColor(0.7333,0.3803,0);
			me["APUEGT"].setText(sprintf("%s", "XX"));
		}
		me["APUN-needle"].setRotation((getprop("/ECAM/Lower/APU-N") + 90) * D2R);
		me["APUEGT-needle"].setRotation((getprop("/ECAM/Lower/APU-EGT") + 90) * D2R);

		me.updateBottomStatus();
	},
};

var canvas_lowerECAM_bleed = {
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_bleed, canvas_lowerECAM_base]};
		m.init(canvas_group, file);
		
		return m;
	},
	getKeys: func() {
		return ["TAT","SAT","GW","UTCh","UTCm"];
	},
	update: func() {
		
		me.updateBottomStatus();
	},
};

var canvas_lowerECAM_cond = {
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_cond, canvas_lowerECAM_base]};
		m.init(canvas_group, file);
		
		return m;
	},
	getKeys: func() {
		return ["TAT","SAT","GW","UTCh","UTCm"];
	},
	update: func() {
		
		me.updateBottomStatus();
	},
};

var canvas_lowerECAM_door = {
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_door, canvas_lowerECAM_base]};
		m.init(canvas_group, file);

		return m;
	},
	getKeys: func() {
		return["TAT","SAT","GW","UTCh","UTCm","Bulk","BulkLine","BulkLbl","Exit1L","Exit1R","Cabin1Left","Cabin1LeftLbl","Cabin1LeftLine","Cabin1LeftSlide","Cabin1Right","Cabin1RightLbl","Cabin1RightLine","Cabin1RightSlide","Cabin2Left","Cabin2LeftLbl",
		"Cabin2LeftLine","Cabin2LeftSlide","Cabin2Right","Cabin2RightLbl","Cabin2RightLine","Cabin2RightSlide","Cabin3Left","Cabin3LeftLbl","Cabin3LeftLine","Cabin3LeftSlide","Cabin3Right","Cabin3RightLbl","Cabin3RightLine","Cabin3RightSlide","AvionicsLine1",
		"AvionicsLbl1","AvionicsLine2","AvionicsLbl2","Cargo1Line","Cargo1Lbl","Cargo1Door","Cargo2Line","Cargo2Lbl","Cargo2Door","ExitLSlide","ExitLLine","ExitLLbl","ExitRSlide","ExitRLine","ExitRLbl","Cabin4Left","Cabin4LeftLbl","Cabin4LeftLine",
		"Cabin4LeftSlide","Cabin4Right","Cabin4RightLbl","Cabin4RightLine","Cabin4RightSlide","DOOROXY-REGUL-LO-PR"];
	},
	update: func() {
		# If you make AirBerlin or Allegiant livery add below 
		
		if (getprop("sim/model/door-positions/doorl1/position-norm") > 0) {
			me["Cabin1Left"].show();
			me["Cabin1Left"].setColor(0.7333,0.3803,0);
			me["Cabin1Left"].setColorFill(0.7333,0.3803,0);
			me["Cabin1LeftLbl"].show();
			me["Cabin1LeftLine"].show();
		} else {
			me["Cabin1Left"].setColor(0.0509,0.7529,0.2941);
			me["Cabin1Left"].setColorFill(0,0,0);
			me["Cabin1LeftLbl"].hide();
			me["Cabin1LeftLine"].hide();
		}
		
		if (getprop("sim/model/door-positions/doorr1/position-norm") > 0) {
			me["Cabin1Right"].show();
			me["Cabin1Right"].setColor(0.7333,0.3803,0);
			me["Cabin1Right"].setColorFill(0.7333,0.3803,0);
			me["Cabin1RightLbl"].show();
			me["Cabin1RightLine"].show();
		} else {
			me["Cabin1Right"].setColor(0.0509,0.7529,0.2941);
			me["Cabin1Right"].setColorFill(0,0,0);
			me["Cabin1RightLbl"].hide();
			me["Cabin1RightLine"].hide();
		}
		
		if (getprop("sim/model/door-positions/doorl4/position-norm") > 0) {
			me["Cabin4Left"].show();
			me["Cabin4Left"].setColor(0.7333,0.3803,0);
			me["Cabin4Left"].setColorFill(0.7333,0.3803,0);
			me["Cabin4LeftLbl"].show();
			me["Cabin4LeftLine"].show();
		} else {
			me["Cabin4Left"].setColor(0.0509,0.7529,0.2941);
			me["Cabin4Left"].setColorFill(0,0,0);
			me["Cabin4LeftLbl"].hide();
			me["Cabin4LeftLine"].hide();
		}
		
		if (getprop("sim/model/door-positions/doorr4/position-norm") > 0) {
			me["Cabin4Right"].show();
			me["Cabin4Right"].setColor(0.7333,0.3803,0);
			me["Cabin4Right"].setColorFill(0.7333,0.3803,0);
			me["Cabin4RightLbl"].show();
			me["Cabin4RightLine"].show();
		} else {
			me["Cabin4Right"].setColor(0.0509,0.7529,0.2941);
			me["Cabin4Right"].setColorFill(0,0,0);
			me["Cabin4RightLbl"].hide();
			me["Cabin4RightLine"].hide();
		}
		
		if (getprop("/sim/model/door-positions/cargobulk/position-norm") > 0) {
			me["Bulk"].setColor(0.7333,0.3803,0);
			me["Bulk"].setColorFill(0.7333,0.3803,0);
			me["BulkLbl"].show();
			me["BulkLine"].show();
		} else {
			me["Bulk"].setColor(0.0509,0.7529,0.2941);
			me["Bulk"].setColorFill(0,0,0);
			me["BulkLbl"].hide();
			me["BulkLine"].hide();
		}
		
		if (getprop("/sim/model/door-positions/cargofwd/position-norm") > 0) {
			me["Cargo1Door"].setColor(0.7333,0.3803,0);
			me["Cargo1Door"].setColorFill(0.7333,0.3803,0);
			me["Cargo1Lbl"].show();
			me["Cargo1Line"].show();
		} else {
			me["Cargo1Door"].setColor(0.0509,0.7529,0.2941);
			me["Cargo1Door"].setColorFill(0,0,0);
			me["Cargo1Lbl"].hide();
			me["Cargo1Line"].hide();
		}
		
		if (getprop("/sim/model/door-positions/cargoaft/position-norm") > 0) {
			me["Cargo2Door"].setColor(0.7333,0.3803,0);
			me["Cargo2Door"].setColorFill(0.7333,0.3803,0);
			me["Cargo2Lbl"].show();
			me["Cargo2Line"].show();
		} else {
			me["Cargo2Door"].setColor(0.0509,0.7529,0.2941);
			me["Cargo2Door"].setColorFill(0,0,0);
			me["Cargo2Lbl"].hide();
			me["Cargo2Line"].hide();
		}
		
		me["Cabin1LeftSlide"].hide();
		me["Cabin1RightSlide"].hide();
		me["Cabin2LeftSlide"].hide();
		me["Cabin2RightSlide"].hide();
		me["Cabin3LeftSlide"].hide();
		me["Cabin3RightSlide"].hide();
		me["Cabin4LeftSlide"].hide();
		me["Cabin4RightSlide"].hide();
		
		me["DOOROXY-REGUL-LO-PR"].hide();
		me["AvionicsLine1"].hide();
		me["AvionicsLine2"].hide();
		me["AvionicsLbl1"].hide();
		me["AvionicsLbl2"].hide();
		me["ExitLSlide"].hide();
		me["ExitLLine"].hide(); 
		me["ExitLLbl"].hide();
		me["ExitRSlide"].hide();
		me["ExitRLine"].hide();
		me["ExitRLbl"].hide();
		me["Cabin1LeftSlide"].hide();
		me["Cabin1RightSlide"].hide();
		me["Cabin4LeftSlide"].hide();
		me["Cabin4RightSlide"].hide();
		me["Cabin2Left"].hide();
		me["Cabin2LeftLine"].hide();
		me["Cabin2LeftLbl"].hide();
		me["Cabin2Right"].hide();
		me["Cabin2RightLine"].hide();
		me["Cabin2RightLbl"].hide();
		me["Cabin3Left"].hide();
		me["Cabin3LeftLine"].hide();
		me["Cabin3LeftLbl"].hide();
		me["Cabin3Right"].hide();
		me["Cabin3RightLine"].hide();
		me["Cabin3RightLbl"].hide();
		
		me.updateBottomStatus();
	},
};

var canvas_lowerECAM_elec = {
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_elec, canvas_lowerECAM_base]};
		m.init(canvas_group, file);

		return m;
	},
	getKeys: func() {
		return ["TAT","SAT","GW","UTCh","UTCm","BAT1-label","Bat1Volt","Bat1Ampere","BAT2-label","Bat2Volt","Bat2Ampere","BAT1-charge","BAT1-discharge","BAT2-charge","BAT2-discharge","ELEC-Line-DC1-DCBAT","ELEC-Line-DC1-DCESS","ELEC-Line-DC2-DCBAT",
		"ELEC-Line-DC1-DCESS_DCBAT","ELEC-Line-DC2-DCESS_DCBAT","ELEC-Line-TR1-DC1","ELEC-Line-TR2-DC2","Shed-label","ELEC-Line-ESSTR-DCESS","TR1-label","TR1Volt","TR1Ampere","TR2-label","TR2Volt","TR2Ampere","EMERGEN-Box-on","EmergenVolt","EmergenHz",
		"ELEC-Line-Emergen-ESSTR","EMERGEN-Label-off","EMERGEN-out","ELEC-Line-ACESS-TRESS","ELEC-Line-AC1-TR1","ELEC-Line-AC2-TR2","ELEC-Line-AC1-ACESS","ELEC-Line-AC2-ACESS","ACESS-SHED","ACESS","AC1-in","AC2-in","ELEC-Line-GEN1-AC1","ELEC-Line-GEN2-AC2",
		"ELEC-Line-APU-AC1","ELEC-Line-APU-EXT","ELEC-Line-EXT-AC2","APU-out","EXT-out","EXTPWR-group","ExtVolt","ExtHz","APU-content","APU-border","APUGentext","APUGenLoad","APUGenVolt","APUGenHz","APUGEN-off","GEN1-label","Gen1Load","Gen1Volt","Gen1Hz",
		"GEN2-label","Gen2Load","GEN2-off","Gen2Volt","Gen2Hz","ELEC-IDG-1-label","ELEC-IDG-1-Temp","IDG1-LOPR","IDG1-DISC","IDG1-RISE-Value","IDG1-RISE-label","GalleyShed","ELEC-IDG-2-Temp","ELEC-IDG-2-label","IDG2-RISE-label","IDG2-RISE-Value","IDG2-LOPR",
		"IDG2-DISC","ESSTR-group","ESSTR-Volt","ESSTR-Ampere","BAT1-content","BAT2-content","BAT1-OFF","BAT2-OFF","GEN1-content","GEN2-content","GEN-1-num-label","GEN-2-num-label","GEN1-off","GEN2-off","GEN1-num-label","GEN2-num-label","EXTPWR-label",
		"ELEC-ACESS-SHED-label","ELEC-DCBAT-label","ELEC-DCESS-label","ELEC-DC2-label","ELEC-DC1-label","ELEC-AC1-label","ELEC-AC2-label","ELEC-ACESS-label"];
	},
	update: func() {

		# BAT1
		if (getprop("/controls/electrical/switches/battery1") == 0) {
			me["BAT1-OFF"].show();
			me["BAT1-content"].hide();
			me["BAT1-discharge"].hide();
			me["BAT1-charge"].hide();
		} else {
			me["BAT1-OFF"].hide();
			me["BAT1-content"].show();
			me["Bat1Ampere"].setText(sprintf("%s", math.round(getprop("/systems/electrical/battery1-amps"))));
			me["Bat1Volt"].setText(sprintf("%s", math.round(getprop("/systems/electrical/battery1-volts"))));

			if (getprop("/systems/electrical/battery1-volts") >= 25) {
				me["Bat1Volt"].setColor(0.0509,0.7529,0.2941);
			} else {
				me["Bat1Volt"].setColor(0.7333,0.3803,0);
			}

			if (getprop("/systems/electrical/battery1-amps") > 5) {
				me["Bat1Ampere"].setColor(0.7333,0.3803,0);
			} else {
				me["Bat1Ampere"].setColor(0.0509,0.7529,0.2941);
			}

			# TODO add correct charge/dischare behaviour
			# this is only temporary
			me["BAT1-discharge"].hide();
			me["BAT1-charge"].hide();
		}

		if (getprop("/systems/electrical/batt1-fault") == 1 or getprop("/systems/electrical/battery1-volts") < 25 or getprop("/systems/electrical/battery1-amps") > 5) {
			me["BAT1-label"].setColor(0.7333,0.3803,0);
		} else {
			me["BAT1-label"].setColor(0.8078,0.8039,0.8078);
		}

		# BAT2
		if (getprop("/controls/electrical/switches/battery2") == 0) {
			me["BAT2-OFF"].show();
			me["BAT2-content"].hide();
			me["BAT2-discharge"].hide();
			me["BAT2-charge"].hide();
		} else {
			me["BAT2-OFF"].hide();
			me["BAT2-content"].show();
			me["Bat2Ampere"].setText(sprintf("%s", math.round(getprop("/systems/electrical/battery2-amps"))));
			me["Bat2Volt"].setText(sprintf("%s", math.round(getprop("/systems/electrical/battery2-volts"))));

			if (getprop("/systems/electrical/battery2-volts") >= 25) {
				me["Bat2Volt"].setColor(0.0509,0.7529,0.2941);
			} else {
				me["Bat2Volt"].setColor(0.7333,0.3803,0);
			}

			if (getprop("/systems/electrical/battery2-amps") > 5) {
				me["Bat2Ampere"].setColor(0.7333,0.3803,0);
			} else {
				me["Bat2Ampere"].setColor(0.0509,0.7529,0.2941);
			}
			# TODO add correct charge/dischare behaviour
			# this is only temporary
			me["BAT2-discharge"].hide();
			me["BAT2-charge"].hide();
		}

		if (getprop("/systems/electrical/batt2-fault") == 1 or getprop("/systems/electrical/battery2-volts") < 25 or getprop("/systems/electrical/battery2-amps") > 5) {
			me["BAT2-label"].setColor(0.7333,0.3803,0);
		} else {
			me["BAT2-label"].setColor(0.8078,0.8039,0.8078);
		}

		# TR1
		# is only powered when ac1 has power
		tr1_v = getprop("/systems/electrical/extra/tr1-volts");
		tr1_a = getprop("/systems/electrical/extra/tr1-amps");

		me["TR1Volt"].setText(sprintf("%s", math.round(tr1_v)));
		me["TR1Ampere"].setText(sprintf("%s", math.round(tr1_a)));

		if (tr1_v < 25 or tr1_v > 31 or tr1_a <= 5) {
			me["TR1-label"].setColor(0.7333,0.3803,0);
		} else {
			me["TR1-label"].setColor(0.8078,0.8039,0.8078);
		}

		if (tr1_v < 25 or tr1_v > 31) {
			me["TR1Volt"].setColor(0.7333,0.3803,0);
		} else {
			me["TR1Volt"].setColor(0.0509,0.7529,0.2941);
		}

		if (tr1_a <= 5) {
			me["TR1Ampere"].setColor(0.7333,0.3803,0);
		} else {
			me["TR1Ampere"].setColor(0.0509,0.7529,0.2941);
		}

		# TR2
		# is only powered when ac2 has power
		tr2_v = getprop("/systems/electrical/extra/tr2-volts");
		tr2_a = getprop("/systems/electrical/extra/tr2-amps");

		me["TR2Volt"].setText(sprintf("%s", math.round(tr2_v)));
		me["TR2Ampere"].setText(sprintf("%s", math.round(tr2_a)));

		if (tr2_v < 25 or tr2_v > 31 or tr2_a <= 5) {
			me["TR2-label"].setColor(0.7333,0.3803,0);
		} else {
			me["TR2-label"].setColor(0.8078,0.8039,0.8078);
		}

		if (tr2_v < 25 or tr2_v > 31) {
			me["TR2Volt"].setColor(0.7333,0.3803,0);
		} else {
			me["TR2Volt"].setColor(0.0509,0.7529,0.2941);
		}

		if (tr2_a <= 5) {
			me["TR2Ampere"].setColor(0.7333,0.3803,0);
		} else {
			me["TR2Ampere"].setColor(0.0509,0.7529,0.2941);
		}

		# ESS TR
		# TODO add amber title on under A.
		# TODO add correct A
		if (getprop("/systems/electrical/bus/dc1") < 25) {
			me["ESSTR-group"].show();
			me["ESSTR-Volt"].setText(sprintf("%s", math.round(getprop("/systems/electrical/bus/dc-ess"))));

			if (getprop("/systems/electrical/bus/dc-ess") < 25 or getprop("/systems/electrical/bus/dc-ess") > 31) {
				me["ESSTR-Volt"].setColor(0.7333,0.3803,0);
			} else {
				me["ESSTR-Volt"].setColor(0.0509,0.7529,0.2941);
			}
		} else {
			me["ESSTR-group"].hide();
		}

		# EMER GEN
		# TODO add values and amber on over/under load
		# TODO changes the prop to the one which indicates the use of the emergen and not of the man depoly
		if (getprop("/controls/electrical/switches/emer-gen") == 0) {
			me["EMERGEN-Box-on"].hide();
			me["EMERGEN-Label-off"].show();
		} else {
			me["EMERGEN-Box-on"].show();
			me["EMERGEN-Label-off"].hide();
		}

		# GEN1
		if (getprop("/controls/electrical/switches/gen1") == 0) {
			me["GEN1-content"].hide();
			me["GEN1-off"].show();
			me["GEN1-label"].setColor(0.7333,0.3803,0);

			if (getprop("/engines/engine[0]/running") == 0) {
				me["GEN1-num-label"].setColor(0.7333,0.3803,0);
			} else {
				me["GEN1-num-label"].setColor(0.8078,0.8039,0.8078);
			}
		} else {
			me["GEN1-content"].show();
			me["GEN1-off"].hide();
			me["Gen1Load"].setText(sprintf("%s", math.round(getprop("/systems/electrical/extra/gen1-load"))));
			me["Gen1Volt"].setText(sprintf("%s", math.round(getprop("/systems/electrical/extra/gen1-volts"))));

			if (getprop("/systems/electrical/bus/gen1-hz") == 0) {
				me["Gen1Hz"].setText(sprintf("XX"));
			} else {
				me["Gen1Hz"].setText(sprintf("%s", math.round(getprop("/systems/electrical/bus/gen1-hz"))));
			}

			if (getprop("/engines/engine[0]/running") == 0) {
				me["GEN1-num-label"].setColor(0.7333,0.3803,0);
			} else {
				me["GEN1-num-label"].setColor(0.8078,0.8039,0.8078);
			}

			if (getprop("/systems/electrical/extra/gen1-volts") > 120 or getprop("/systems/electrical/extra/gen1-volts") < 110 or getprop("/systems/electrical/bus/gen1-hz") > 410 or getprop("/systems/electrical/bus/gen1-hz") < 390 or getprop("/systems/electrical/extra/gen1-load") > 100) {
				me["GEN1-label"].setColor(0.7333,0.3803,0);
			} else {
				me["GEN1-label"].setColor(0.8078,0.8039,0.8078);
			}

			if (getprop("/systems/electrical/extra/gen1-load") > 100) {
				me["Gen1Load"].setColor(0.7333,0.3803,0);
			} else {
				me["Gen1Load"].setColor(0.0509,0.7529,0.2941);
			}

			if (getprop("/systems/electrical/extra/gen1-volts") > 120 or getprop("/systems/electrical/extra/gen1-volts") < 110) {
				me["Gen1Volt"].setColor(0.7333,0.3803,0);
			} else {
				me["Gen1Volt"].setColor(0.0509,0.7529,0.2941);
			}

			if (getprop("/systems/electrical/bus/gen1-hz") > 410 or getprop("/systems/electrical/bus/gen1-hz") < 390) {
				me["Gen1Hz"].setColor(0.7333,0.3803,0);
			} else {
				me["Gen1Hz"].setColor(0.0509,0.7529,0.2941);
			}
		}

		# GEN2
		if (getprop("/controls/electrical/switches/gen2") == 0) {
			me["GEN2-content"].hide();
			me["GEN2-off"].show();
			me["GEN2-label"].setColor(0.7333,0.3803,0);

			if (getprop("/engines/engine[1]/running") == 0) {
				me["GEN2-num-label"].setColor(0.7333,0.3803,0);
			} else {
				me["GEN2-num-label"].setColor(0.8078,0.8039,0.8078);
			}
		} else {
			me["GEN2-content"].show();
			me["GEN2-off"].hide();
			me["Gen2Load"].setText(sprintf("%s", math.round(getprop("/systems/electrical/extra/gen2-load"))));
			me["Gen2Volt"].setText(sprintf("%s", math.round(getprop("/systems/electrical/extra/gen2-volts"))));
			if (getprop("/systems/electrical/bus/gen2-hz") == 0) {
				me["Gen2Hz"].setText(sprintf("XX"));
			} else {
				me["Gen2Hz"].setText(sprintf("%s", math.round(getprop("/systems/electrical/bus/gen2-hz"))));
			}

			if (getprop("/engines/engine[1]/running") == 0) {
				me["GEN2-num-label"].setColor(0.7333,0.3803,0);
			} else {
				me["GEN2-num-label"].setColor(0.8078,0.8039,0.8078);
			}

			if (getprop("/systems/electrical/extra/gen2-volts") > 120 or getprop("/systems/electrical/extra/gen2-volts") < 110 or getprop("/systems/electrical/bus/gen2-hz") > 410 or getprop("/systems/electrical/bus/gen2-hz") < 390 or getprop("/systems/electrical/extra/gen2-load") > 100) {
				me["GEN2-label"].setColor(0.7333,0.3803,0);
			} else {
				me["GEN2-label"].setColor(0.8078,0.8039,0.8078);
			}

			if (getprop("/systems/electrical/extra/gen1-load") > 100) {
				me["Gen1Load"].setColor(0.7333,0.3803,0);
			} else {
				me["Gen1Load"].setColor(0.0509,0.7529,0.2941);
			}


			if (getprop("/systems/electrical/extra/gen2-volts") > 120 or getprop("/systems/electrical/extra/gen2-volts") < 110) {
				me["Gen2Volt"].setColor(0.7333,0.3803,0);
			} else {
				me["Gen2Volt"].setColor(0.0509,0.7529,0.2941);
			}

			if (getprop("/systems/electrical/bus/gen2-hz") > 410 or getprop("/systems/electrical/bus/gen2-hz") < 390) {
				me["Gen2Hz"].setColor(0.7333,0.3803,0);
			} else {
				me["Gen2Hz"].setColor(0.0509,0.7529,0.2941);
			}
		}

		# APU
		if (getprop("/controls/APU/master") == 0) {
			me["APU-content"].hide();
			me["APUGEN-off"].hide();
			me["APU-border"].hide();
			me["APUGentext"].setColor(0.8078,0.8039,0.8078);
		} else {
			me["APU-border"].show();
			if (getprop("/controls/electrical/switches/gen-apu") == 0) {
				me["APU-content"].hide();
				me["APUGEN-off"].show();
				me["APUGentext"].setColor(0.7333,0.3803,0);
			} else {
				me["APU-content"].show();
				me["APUGEN-off"].hide();
				me["APUGenLoad"].setText(sprintf("%s", math.round(getprop("/systems/electrical/extra/apu-load"))));
				me["APUGenVolt"].setText(sprintf("%s", math.round(getprop("/systems/electrical/extra/apu-volts"))));

				if (getprop("/systems/electrical/extra/apu-hz") == 0) {
					me["APUGenHz"].setText(sprintf("XX"));
				} else {
					me["APUGenHz"].setText(sprintf("%s", math.round(getprop("/systems/electrical/extra/apu-hz"))));
				}

				if (getprop("/systems/electrical/extra/apu-volts") > 120 or getprop("/systems/electrical/extra/apu-volts") < 110 or getprop("/systems/electrical/extra/apu-hz") > 410 or getprop("/systems/electrical/extra/apu-hz") < 390 or getprop("/systems/electrical/extra/apu-load") > 100) {
					me["APUGentext"].setColor(0.7333,0.3803,0);
				} else {
					me["APUGentext"].setColor(0.8078,0.8039,0.8078);
				}

				if(getprop("/systems/electrical/extra/apu-load") > 100) {
					me["APUGenLoad"].setColor(0.7333,0.3803,0);
				} else {
					me["APUGenLoad"].setColor(0.0509,0.7529,0.2941);
				}

				if (getprop("/systems/electrical/extra/apu-volts") > 120 or getprop("/systems/electrical/extra/apu-volts") < 110) {
					me["APUGenVolt"].setColor(0.7333,0.3803,0);
				} else {
					me["APUGenVolt"].setColor(0.0509,0.7529,0.2941);
				}

				if (getprop("/systems/electrical/extra/apu-hz") > 410 or getprop("/systems/electrical/extra/apu-hz") < 390) {
					me["APUGenHz"].setColor(0.7333,0.3803,0);
				} else {
					me["APUGenHz"].setColor(0.0509,0.7529,0.2941);
				}
			}
		}

		# EXT PWR
		
		if (getprop("/controls/switches/cart") == 0) {
			me["EXTPWR-group"].hide();
		} else {
			me["EXTPWR-group"].show();
			me["ExtVolt"].setText(sprintf("%s", math.round(getprop("/systems/electrical/extra/ext-volts"))));
			me["ExtHz"].setText(sprintf("%s", math.round(getprop("/systems/electrical/extra/ext-hz"))));

			if (getprop("/systems/electrical/extra/ext-hz") > 410 or getprop("/systems/electrical/extra/ext-hz") < 390 or getprop("/systems/electrical/extra/ext-volts") > 120 or getprop("/systems/electrical/extra/ext-volts") < 110) {
				me["EXTPWR-label"].setColor(0.7333,0.3803,0);
			} else {
				me["EXTPWR-label"].setColor(0.0509,0.7529,0.2941);
			}

			if (getprop("/systems/electrical/extra/ext-hz") > 410 or getprop("/systems/electrical/extra/ext-hz") < 390) {
				me["ExtHz"].setColor(0.7333,0.3803,0);
			} else {
				me["ExtHz"].setColor(0.0509,0.7529,0.2941);
			}

			if (getprop("/systems/electrical/extra/ext-volts") > 120 or getprop("/systems/electrical/extra/ext-volts") < 110) {
				me["ExtVolt"].setColor(0.7333,0.3803,0);
			} else {
				me["ExtVolt"].setColor(0.0509,0.7529,0.2941);
			}
		}

		# TODO add IDG warnings and rise part

		if (getprop("/systems/electrical/extra/galleyshed") == 1 or (getprop("/controls/electrical/switches/galley") == 0)) {
			me["GalleyShed"].show();
		} else {
			me["GalleyShed"].hide();
		}

		# Bus indicators
		if (getprop("/systems/electrical/bus/dcbat") > 25) {
			me["ELEC-DCBAT-label"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["ELEC-DCBAT-label"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/systems/electrical/bus/dc1") > 25) {
			me["ELEC-DC1-label"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["ELEC-DC1-label"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/systems/electrical/bus/dc2") > 25) {
			me["ELEC-DC2-label"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["ELEC-DC2-label"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/systems/electrical/bus/dc-ess") > 25) {
			me["ELEC-DCESS-label"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["ELEC-DCESS-label"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/systems/electrical/bus/ac-ess") > 110) {
			me["ELEC-ACESS-label"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["ELEC-ACESS-label"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/systems/electrical/bus/ac-ess") > 110) {
			me["ACESS-SHED"].hide();
		} else {
			me["ACESS-SHED"].show();
		}

		if (getprop("/systems/electrical/bus/ac1") > 110) {
			me["ELEC-AC1-label"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["ELEC-AC1-label"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/systems/electrical/bus/ac2") > 110) {
			me["ELEC-AC2-label"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["ELEC-AC2-label"].setColor(0.7333,0.3803,0);
		}


		# Managment of the connecting lines between the components
		if (getprop("/systems/electrical/ac1-src") == "APU" or getprop("/systems/electrical/ac2-src") == "APU") {
			me["APU-out"].show();
		} else {
			me["APU-out"].hide();
		}

		if (getprop("/systems/electrical/ac1-src") == "EXT" or getprop("/systems/electrical/ac2-src") == "EXT") {
			me["EXT-out"].show();
		} else {
			me["EXT-out"].hide();
		}

		if (getprop("/systems/electrical/extra/gen1-volts") >= 110) {
			me["ELEC-Line-GEN1-AC1"].show();
		} else {
			me["ELEC-Line-GEN1-AC1"].hide();
		}

		if (getprop("/systems/electrical/extra/gen2-volts") >= 110) {
			me["ELEC-Line-GEN2-AC2"].show();
		} else {
			me["ELEC-Line-GEN2-AC2"].hide();
		}

		if (getprop("/systems/electrical/bus/ac1") >= 110) {
			me["AC1-in"].show();
		} else {
			me["AC1-in"].hide()
		}

		if (getprop("/systems/electrical/bus/ac2") >= 110) {
			me["AC2-in"].show();
		} else {
			me["AC2-in"].hide()
		}

		if (getprop("/systems/electrical/ac1-src") == "APU" or getprop("/systems/electrical/ac1-src") == "EXT" or getprop("/systems/electrical/ac1-src") == "XTIE" or getprop("/systems/electrical/ac2-src") == "XTIE") {
			me["ELEC-Line-APU-AC1"].show();
		} else {
			me["ELEC-Line-APU-AC1"].hide();
		}

		if (getprop("/systems/electrical/ac1-src") == "EXT" or getprop("/systems/electrical/ac2-src") == "APU" or getprop("/systems/electrical/ac1-src") == "XTIE" or getprop("/systems/electrical/ac2-src") == "XTIE") {
			me["ELEC-Line-APU-EXT"].show();
		} else {
			me["ELEC-Line-APU-EXT"].hide();
		}

		if (getprop("/systems/electrical/ac2-src") == "APU" or getprop("/systems/electrical/ac2-src") == "EXT" or getprop("/systems/electrical/ac1-src") == "XTIE" or getprop("/systems/electrical/ac2-src") == "XTIE") {
			me["ELEC-Line-EXT-AC2"].show();
		} else {
			me["ELEC-Line-EXT-AC2"].hide();
		}

		if (getprop("/controls/electrical/switches/ac-ess-feed") == 1) {
			me["ELEC-Line-AC1-ACESS"].hide();
			me["ELEC-Line-AC2-ACESS"].show();
		} else {
			me["ELEC-Line-AC1-ACESS"].show();
			me["ELEC-Line-AC2-ACESS"].hide();
		}

		if (getprop("/systems/electrical/tr1-fault") == 0) {
			if (getprop("/systems/electrical/bus/ac1") < 110) {
				me["ELEC-Line-AC1-TR1"].setColorFill(0.7333,0.3803,0);
			} else {
				me["ELEC-Line-AC1-TR1"].setColorFill(0.0509,0.7529,0.2941);
			}
			me["ELEC-Line-AC1-TR1"].show();
			me["ELEC-Line-TR1-DC1"].show();
		} else {
			me["ELEC-Line-AC1-TR1"].hide();
			me["ELEC-Line-TR1-DC1"].hide();
		}

		if (getprop("/systems/electrical/tr2-fault") == 0) {
			if (getprop("/systems/electrical/bus/ac2") < 110) {
				me["ELEC-Line-AC2-TR2"].setColorFill(0.7333,0.3803,0);
			} else {
				me["ELEC-Line-AC2-TR2"].setColorFill(0.0509,0.7529,0.2941);
			}
			me["ELEC-Line-AC2-TR2"].show();
			me["ELEC-Line-TR2-DC2"].show();
		} else {
			me["ELEC-Line-AC2-TR2"].hide();
			me["ELEC-Line-TR2-DC2"].hide();
		}

		if (getprop("/systems/electrical/bus/ac1") < 110) {
			me["ELEC-Line-DC1-DCESS"].hide();
		} else {
			me["ELEC-Line-DC1-DCESS"].show();
		}

		if (getprop("/systems/electrical/bus/dc1") < 25) {
			me["ELEC-Line-DC1-DCESS_DCBAT"].hide();
			me["ELEC-Line-DC1-DCBAT"].hide();
		} else {
			me["ELEC-Line-DC1-DCESS_DCBAT"].show();
			me["ELEC-Line-DC1-DCBAT"].show();
		}

		if (getprop("/systems/electrical/bus/dc2") < 25 or getprop("/systems/electrical/bus/dc1") >= 25 and getprop("/systems/electrical/bus/ac1") >= 110) {
			me["ELEC-Line-DC2-DCESS_DCBAT"].hide();
			me["ELEC-Line-DC2-DCBAT"].hide();
		} else {
			me["ELEC-Line-DC2-DCESS_DCBAT"].show();
			me["ELEC-Line-DC2-DCBAT"].show();
		}

		if (getprop("/controls/electrical/switches/emer-gen") == 1 and (getprop("/systems/electrical/bus/ac1") < 110 and getprop("/controls/electrical/switches/ac-ess-feed") == 0 or getprop("/systems/electrical/bus/ac2") < 110 and getprop("/controls/electrical/switches/ac-ess-feed") == 1)) {
			me["EMERGEN-out"].show();
		} else {
			me["EMERGEN-out"].hide();
		}

		# TODO add connections from/to ESS TR

		# hide not yet implemented items
		me["IDG1-LOPR"].hide();
		me["IDG2-LOPR"].hide();
		me["IDG1-DISC"].hide();
		me["IDG2-DISC"].hide();
		me["Shed-label"].hide();
		me["ELEC-Line-ACESS-TRESS"].hide();
		me["ELEC-Line-Emergen-ESSTR"].hide();
		me["IDG2-RISE-label"].hide();
		me["IDG2-RISE-Value"].hide();
		me["IDG1-RISE-label"].hide();
		me["IDG1-RISE-Value"].hide();

		me.updateBottomStatus();
	},
};

var canvas_lowerECAM_eng = {
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_eng, canvas_lowerECAM_base]};
		m.init(canvas_group, file);
		
		return m;
	},
	getKeys: func() {
		return ["TAT","SAT","GW","UTCh","UTCm","OilQT1-needle","OilQT2-needle","OilQT1","OilQT2","OilQT1-decimal","OilQT2-decimal","OilPSI1-needle","OilPSI2-needle","OilPSI1","OilPSI2"];
	},
	update: func() {
		# Oil Quantity
		me["OilQT1"].setText(sprintf("%s", math.round(getprop("/engines/engine[0]/oil-qt-actual"))));
		me["OilQT2"].setText(sprintf("%s", math.round(getprop("/engines/engine[1]/oil-qt-actual"))));
		me["OilQT1-decimal"].setText(sprintf("%s", int(10*math.mod(getprop("/engines/engine[0]/oil-qt-actual"),1))));
		me["OilQT2-decimal"].setText(sprintf("%s", int(10*math.mod(getprop("/engines/engine[1]/oil-qt-actual"),1))));
		
		me["OilQT1-needle"].setRotation((getprop("/ECAM/Lower/Oil-QT[0]") + 90) * D2R);
		me["OilQT2-needle"].setRotation((getprop("/ECAM/Lower/Oil-QT[1]") + 90) * D2R);
		
		# Oil Pressure
		if (getprop("/engines/engine[0]/oil-psi-actual") >= 20) {
			me["OilPSI1"].setColor(0.0509,0.7529,0.2941);
			me["OilPSI1-needle"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["OilPSI1"].setColor(1,0,0);
			me["OilPSI1-needle"].setColor(1,0,0);
		}
		
		if (getprop("/engines/engine[1]/oil-psi-actual") >= 20) {
			me["OilPSI2"].setColor(0.0509,0.7529,0.2941);
			me["OilPSI2-needle"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["OilPSI2"].setColor(1,0,0);
			me["OilPSI2-needle"].setColor(1,0,0);
		}
		
		me["OilPSI1"].setText(sprintf("%s", math.round(getprop("/engines/engine[0]/oil-psi-actual"))));
		me["OilPSI2"].setText(sprintf("%s", math.round(getprop("/engines/engine[1]/oil-psi-actual"))));
		
		me["OilPSI1-needle"].setRotation((getprop("/ECAM/Lower/Oil-PSI[0]") + 90) * D2R);
		me["OilPSI2-needle"].setRotation((getprop("/ECAM/Lower/Oil-PSI[1]") + 90) * D2R);
		
		me.updateBottomStatus();
	},
};


var canvas_lowerECAM_fctl = {
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_fctl, canvas_lowerECAM_base]};
		m.init(canvas_group, file);

		return m;
	},
	getKeys: func() {
		return["TAT","SAT","GW","UTCh","UTCm","ailL","ailR","elevL","elevR","PTcc","PT","PTupdn","elac1","elac2","sec1","sec2","sec3","ailLblue","ailRblue","elevLblue","elevRblue","rudderblue","ailLgreen","ailRgreen","elevLgreen","ruddergreen","PTgreen",
		"elevRyellow","rudderyellow","PTyellow","rudder","spdbrkblue","spdbrkgreen","spdbrkyellow","spoiler1Rex","spoiler1Rrt","spoiler2Rex","spoiler2Rrt","spoiler3Rex","spoiler3Rrt","spoiler4Rex","spoiler4Rrt","spoiler5Rex","spoiler5Rrt","spoiler1Lex",
		"spoiler1Lrt","spoiler2Lex","spoiler2Lrt","spoiler3Lex","spoiler3Lrt","spoiler4Lex","spoiler4Lrt","spoiler5Lex","spoiler5Lrt","spoiler1Rf","spoiler2Rf","spoiler3Rf","spoiler4Rf","spoiler5Rf","spoiler1Lf","spoiler2Lf","spoiler3Lf","spoiler4Lf",
		"spoiler5Lf","ailLscale","ailRscale","path4249","path4249-3","path4249-3-6-7","path4249-3-6-7-5","path4249-3-6"];
	},
	update: func() {
		blue_psi = getprop("/systems/hydraulic/blue-psi");
		green_psi = getprop("/systems/hydraulic/green-psi");
		yellow_psi = getprop("/systems/hydraulic/yellow-psi");
		
		# Pitch Trim
		me["PT"].setText(sprintf("%2.1f", math.round(getprop("/ECAM/Lower/elevator-trim-deg"), 0.1)));

		if (math.round(getprop("/ECAM/Lower/elevator-trim-deg"), 0.1) >= 0) {
			me["PTupdn"].setText(sprintf("UP"));
		} else if (math.round(getprop("/ECAM/Lower/elevator-trim-deg"), 0.1) < 0) {
			me["PTupdn"].setText(sprintf("DN"));
		}

		if (green_psi < 1500 and yellow_psi < 1500) {
			me["PT"].setColor(0.7333,0.3803,0);
			me["PTupdn"].setColor(0.7333,0.3803,0);
			me["PTcc"].setColor(0.7333,0.3803,0);
		} else {
			me["PT"].setColor(0.0509,0.7529,0.2941);
			me["PTupdn"].setColor(0.0509,0.7529,0.2941);
			me["PTcc"].setColor(0.0509,0.7529,0.2941);
		}
		
		# Ailerons
		me["ailL"].setTranslation(0,getprop("/ECAM/Lower/aileron-ind-left")*100);
		me["ailR"].setTranslation(0,getprop("/ECAM/Lower/aileron-ind-right")*(-100));
			
		if (blue_psi < 1500 and green_psi < 1500) {
			me["ailL"].setColor(0.7333,0.3803,0);
			me["ailR"].setColor(0.7333,0.3803,0);
		} else {
			me["ailL"].setColor(0.0509,0.7529,0.2941);
			me["ailR"].setColor(0.0509,0.7529,0.2941);
		}
		
		# Elevators
		me["elevL"].setTranslation(0,getprop("/ECAM/Lower/elevator-ind-left")*100);
		me["elevR"].setTranslation(0,getprop("/ECAM/Lower/elevator-ind-right")*100);

		if (blue_psi < 1500 and green_psi < 1500) {
			me["elevL"].setColor(0.7333,0.3803,0);
		} else {
			me["elevL"].setColor(0.0509,0.7529,0.2941);
		}
		
		if (blue_psi < 1500 and yellow_psi < 1500) {
			me["elevR"].setColor(0.7333,0.3803,0);
		} else {
			me["elevR"].setColor(0.0509,0.7529,0.2941);
		}
		
		# Rudder
		me["rudder"].setRotation(getprop("/controls/flight/rudder-fdm")*(-0.6));

		if (blue_psi < 1500 and yellow_psi < 1500 and green_psi < 1500) {
			me["rudder"].setColor(0.7333,0.3803,0);
		} else {
			me["rudder"].setColor(0.0509,0.7529,0.2941);
		}
		
		# Spoilers
		if (getprop("/controls/flight/spoiler-l1") < 0.033) {
			me["spoiler1Lex"].hide();
			me["spoiler1Lrt"].show();
		} else {
			me["spoiler1Lrt"].hide();
			me["spoiler1Lex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-l2") < 0.033) {
			me["spoiler2Lex"].hide();
			me["spoiler2Lrt"].show();
		} else {
			me["spoiler2Lrt"].hide();
			me["spoiler2Lex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-l3") < 0.033) {
			me["spoiler3Lex"].hide();
			me["spoiler3Lrt"].show();
		} else {
			me["spoiler3Lrt"].hide();
			me["spoiler3Lex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-l4") < 0.033) {
			me["spoiler4Lex"].hide();
			me["spoiler4Lrt"].show();
		} else {
			me["spoiler4Lrt"].hide();
			me["spoiler4Lex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-l5") < 0.033) {
			me["spoiler5Lex"].hide();
			me["spoiler5Lrt"].show();
		} else {
			me["spoiler5Lrt"].hide();
			me["spoiler5Lex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-r1") < 0.033) {
			me["spoiler1Rex"].hide();
			me["spoiler1Rrt"].show();
		} else {
			me["spoiler1Rrt"].hide();
			me["spoiler1Rex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-r2") < 0.033) {
			me["spoiler2Rex"].hide();
			me["spoiler2Rrt"].show();
		} else {
			me["spoiler2Rrt"].hide();
			me["spoiler2Rex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-r3") < 0.033) {
			me["spoiler3Rex"].hide();
			me["spoiler3Rrt"].show();
		} else {
			me["spoiler3Rrt"].hide();
			me["spoiler3Rex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-r4") < 0.033) {
			me["spoiler4Rex"].hide();
			me["spoiler4Rrt"].show();
		} else {
			me["spoiler4Rrt"].hide();
			me["spoiler4Rex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-r5") < 0.033) {
			me["spoiler5Rex"].hide();
			me["spoiler5Rrt"].show();
		} else {
			me["spoiler5Rrt"].hide();
			me["spoiler5Rex"].show();
		}
		
		# Spoiler Fail
		if (getprop("/controls/flight/spoiler-l1-failed") or green_psi < 1500) {
			me["spoiler1Lex"].setColor(0.7333,0.3803,0);
			me["spoiler1Lrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-l1") < 0.033) {
				me["spoiler1Lf"].show();
			} else {
				me["spoiler1Lf"].hide();
			}
		} else {
			me["spoiler1Lex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler1Lrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler1Lf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-l2-failed") or yellow_psi < 1500) {
			me["spoiler2Lex"].setColor(0.7333,0.3803,0);
			me["spoiler2Lrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-l2") < 0.033) {
				me["spoiler2Lf"].show();
			} else {
				me["spoiler2Lf"].hide();
			}
		} else {
			me["spoiler2Lex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler2Lrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler2Lf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-l3-failed") or blue_psi < 1500) {
			me["spoiler3Lex"].setColor(0.7333,0.3803,0);
			me["spoiler3Lrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-l3") < 0.033) {
				me["spoiler3Lf"].show();
			} else {
				me["spoiler3Lf"].hide();
			}
		} else {
			me["spoiler3Lex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler3Lrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler3Lf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-l4-failed") or yellow_psi < 1500) {
			me["spoiler4Lex"].setColor(0.7333,0.3803,0);
			me["spoiler4Lrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-l4") < 0.033) {
				me["spoiler4Lf"].show();
			} else {
				me["spoiler4Lf"].hide();
			}
		} else {
			me["spoiler4Lex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler4Lrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler4Lf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-l5-failed") or green_psi < 1500) {
			me["spoiler5Lex"].setColor(0.7333,0.3803,0);
			me["spoiler5Lrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-l5") < 0.033) {
				me["spoiler5Lf"].show();
			} else {
				me["spoiler5Lf"].hide();
			}
		} else {
			me["spoiler5Lex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler5Lrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler5Lf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-r1-failed") or green_psi < 1500) {
			me["spoiler1Rex"].setColor(0.7333,0.3803,0);
			me["spoiler1Rrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-r1") < 0.033) {
				me["spoiler1Rf"].show();
			} else {
				me["spoiler1Rf"].hide();
			}
		} else {
			me["spoiler1Rex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler1Rrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler1Rf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-r2-failed") or yellow_psi < 1500) {
			me["spoiler2Rex"].setColor(0.7333,0.3803,0);
			me["spoiler2Rrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-r2") < 0.033) {
				me["spoiler2Rf"].show();
			} else {
				me["spoiler2Rf"].hide();
			}
		} else {
			me["spoiler2Rex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler2Rrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler2Rf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-r3-failed") or blue_psi < 1500) {
			me["spoiler3Rex"].setColor(0.7333,0.3803,0);
			me["spoiler3Rrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-r3") < 0.033) {
				me["spoiler3Rf"].show();
			} else {
				me["spoiler3Rf"].hide();
			}
		} else {
			me["spoiler3Rex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler3Rrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler3Rf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-r4-failed") or yellow_psi < 1500) {
			me["spoiler4Rex"].setColor(0.7333,0.3803,0);
			me["spoiler4Rrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-r4") < 0.033) {
				me["spoiler4Rf"].show();
			} else {
				me["spoiler4Rf"].hide();
			}
		} else {
			me["spoiler4Rex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler4Rrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler4Rf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-r5-failed") or green_psi < 1500) {
			me["spoiler5Rex"].setColor(0.7333,0.3803,0);
			me["spoiler5Rrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-r5") < 0.033) {
				me["spoiler5Rf"].show();
			} else {
				me["spoiler5Rf"].hide();
			}
		} else {
			me["spoiler5Rex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler5Rrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler5Rf"].hide();
		}
		
		# Flight Computers		
		if (getprop("/systems/fctl/elac1")) {
			me["elac1"].setColor(0.0509,0.7529,0.2941);
			me["path4249"].setColor(0.0509,0.7529,0.2941);
		} else if ((getprop("/systems/fctl/elac1") == 0) or (getprop("/systems/failures/elac1") == 1)) {
			me["elac1"].setColor(0.7333,0.3803,0);
			me["path4249"].setColor(0.7333,0.3803,0);
		}
		
		if (getprop("/systems/fctl/elac2")) {
			me["elac2"].setColor(0.0509,0.7529,0.2941);
			me["path4249-3"].setColor(0.0509,0.7529,0.2941);
		} else if ((getprop("/systems/fctl/elac2") == 0) or (getprop("/systems/failures/elac2") == 1)) {
			me["elac2"].setColor(0.7333,0.3803,0);
			me["path4249-3"].setColor(0.7333,0.3803,0);
		}
		
		if (getprop("/systems/fctl/sec1")) {
			me["sec1"].setColor(0.0509,0.7529,0.2941);
			me["path4249-3-6-7"].setColor(0.0509,0.7529,0.2941);
		} else if ((getprop("/systems/fctl/sec1") == 0) or (getprop("/systems/failures/sec1") == 1)) {
			me["sec1"].setColor(0.7333,0.3803,0);
			me["path4249-3-6-7"].setColor(0.7333,0.3803,0);
		}
		
		if (getprop("/systems/fctl/sec2")) {
			me["sec2"].setColor(0.0509,0.7529,0.2941);
			me["path4249-3-6-7-5"].setColor(0.0509,0.7529,0.2941);
		} else if ((getprop("/systems/fctl/sec2") == 0) or (getprop("/systems/failures/sec2") == 1)) {
			me["sec2"].setColor(0.7333,0.3803,0);
			me["path4249-3-6-7-5"].setColor(0.7333,0.3803,0);
		}
		
		if (getprop("/systems/fctl/sec3")) {
			me["sec3"].setColor(0.0509,0.7529,0.2941);
			me["path4249-3-6"].setColor(0.0509,0.7529,0.2941);
		} else if ((getprop("/systems/fctl/sec3") == 0) or (getprop("/systems/failures/sec3") == 1)) {
			me["sec3"].setColor(0.7333,0.3803,0);
			me["path4249-3-6"].setColor(0.7333,0.3803,0);
		}
		
		# Hydraulic Indicators
		if (getprop("/systems/hydraulic/blue-psi") >= 1500) {
			me["ailLblue"].setColor(0.0509,0.7529,0.2941);
			me["ailRblue"].setColor(0.0509,0.7529,0.2941);
			me["elevLblue"].setColor(0.0509,0.7529,0.2941);
			me["elevRblue"].setColor(0.0509,0.7529,0.2941);
			me["rudderblue"].setColor(0.0509,0.7529,0.2941);
			me["spdbrkblue"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["ailLblue"].setColor(0.7333,0.3803,0);
			me["ailRblue"].setColor(0.7333,0.3803,0);
			me["elevLblue"].setColor(0.7333,0.3803,0);
			me["elevRblue"].setColor(0.7333,0.3803,0);
			me["rudderblue"].setColor(0.7333,0.3803,0);
			me["spdbrkblue"].setColor(0.7333,0.3803,0);
		}
		
		if (getprop("/systems/hydraulic/green-psi") >= 1500) {
			me["ailLgreen"].setColor(0.0509,0.7529,0.2941);
			me["ailRgreen"].setColor(0.0509,0.7529,0.2941);
			me["elevLgreen"].setColor(0.0509,0.7529,0.2941);
			me["ruddergreen"].setColor(0.0509,0.7529,0.2941);
			me["PTgreen"].setColor(0.0509,0.7529,0.2941);
			me["spdbrkgreen"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["ailLgreen"].setColor(0.7333,0.3803,0);
			me["ailRgreen"].setColor(0.7333,0.3803,0);
			me["elevLgreen"].setColor(0.7333,0.3803,0);
			me["ruddergreen"].setColor(0.7333,0.3803,0);
			me["PTgreen"].setColor(0.7333,0.3803,0);
			me["spdbrkgreen"].setColor(0.7333,0.3803,0);
		}
		
		if (getprop("/systems/hydraulic/yellow-psi") >= 1500) {
			me["elevRyellow"].setColor(0.0509,0.7529,0.2941);
			me["rudderyellow"].setColor(0.0509,0.7529,0.2941);
			me["PTyellow"].setColor(0.0509,0.7529,0.2941);
			me["spdbrkyellow"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["elevRyellow"].setColor(0.7333,0.3803,0);
			me["rudderyellow"].setColor(0.7333,0.3803,0);
			me["PTyellow"].setColor(0.7333,0.3803,0);
			me["spdbrkyellow"].setColor(0.7333,0.3803,0);
		}
		
		me.updateBottomStatus();
	},
};

var canvas_lowerECAM_fuel = {
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_fuel, canvas_lowerECAM_base]};
		m.init(canvas_group, file);

		return m;
	},
	getKeys: func() {
		return["TAT","SAT","GW","UTCh","UTCm","FUEL-Pump-Left-1","FUEL-Pump-Left-2","FUEL-Pump-Center-1","FUEL-Pump-Center-2","FUEL-Pump-Right-1","FUEL-Pump-Right-2","FUEL-Left-blocked","FUEL-Right-blocked","FUEL-Center-blocked","FUEL-Left-Tranfser",
		"FUEL-Right-Tranfse","FUEL-Left-Outer-Inacc","FUEL-Left-Inner-Inacc","FUEL-Center-Inacc","FUEL-Right-Inner-Inacc","FUEL-Right-Outer-Inacc","FUEL-Left-Outer-quantity","FUEL-Left-Inner-quantity","FUEL-Center-quantity","FUEL-Right-Inner-quantity",
		"FUEL-Right-Outer-quantity","FUEL-On-Board","FUEL-Flow-per-min","FUEL-APU-arrow","FUEL-APU-label","FUEL-used-1","FUEL-used-both","FUEL-used-2","FUEL-ENG-Master-1","FUEL-ENG-Master-2","FUEL-XFEED","FUEL-XFEED-pipes","FUEL-Left-Outer-temp",
		"FUEL-Left-Inner-temp","FUEL-Right-Inner-temp","FUEL-Right-Outer-temp","FUEL-Pump-Left-1-Closed","FUEL-Pump-Left-1-Open","FUEL-Pump-Left-2-Closed","FUEL-Pump-Left-2-Open","FUEL-Pump-Center-1-Open","FUEL-Pump-Center-1-Closed","FUEL-Pump-Center-2-Closed",
		"FUEL-Pump-Center-2-Open","FUEL-Pump-Right-1-Closed","FUEL-Pump-Right-1-Open","FUEL-Pump-Right-2-Closed","FUEL-Pump-Right-2-Open","FUEL-ENG-1-label","FUEL-ENG-2-label","FUEL-ENG-1-pipe","FUEL-ENG-2-pipe","FUEL-Right-Tranfser","ENG1idFFlow","ENG2idFFlow"];
	},
	update: func() {
		
		# if (getprop("engines/engine[0]/n1-actual") < getprop("/controls/engines/idle-limit")) {
		if (getprop("engines/engine[0]/n1-actual") < 19.7) {
			me["ENG1idFFlow"].setColor(0.7333,0.3803,0);
		} else {
			me["ENG1idFFlow"].setColor(0.8078,0.8039,0.8078);
		}
		
		# if (getprop("engines/engine[1]/n1-actual") < getprop("/controls/engines/idle-limit")) {
		if (getprop("engines/engine[1]/n1-actual") < 19.7) {
			me["ENG2idFFlow"].setColor(0.7333,0.3803,0);
		} else {
			me["ENG2idFFlow"].setColor(0.8078,0.8039,0.8078);
		}
		
		# TODO add FOB half-boxed amber if some fuel is blocked
		me["FUEL-On-Board"].setText(sprintf("%s", math.round(getprop("/consumables/fuel/total-fuel-lbs"), 10)));
		
		if (getprop("/systems/fadec/powered1") == 1 and getprop("/systems/fadec/powered2") == 1) {
			me["FUEL-Flow-per-min"].setColor(0.0509,0.7529,0.2941);
			me["FUEL-Flow-per-min"].setText(sprintf("%s", math.round((getprop("/engines/engine[0]/fuel-flow_actual") + getprop("/engines/engine[1]/fuel-flow_actual")) / 60, 1)));
		} else {
			me["FUEL-Flow-per-min"].setColor(0.7333,0.3803,0);
			me["FUEL-Flow-per-min"].setText("XX");
		}
		
		# this is now bound to the ENG master switch
		# TODO use the valve prop and add amber if diffrence between eng master and valve
		# TODO add transition state
		# TODO fix amber/green at the same time when closed
		if (getprop("/controls/engines/engine[0]/cutoff-switch") == 0) {
			me["FUEL-ENG-Master-1"].setRotation(0);
			me["FUEL-ENG-Master-1"].setColor(0.0509,0.7529,0.2941);
			me["FUEL-ENG-1-pipe"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["FUEL-ENG-Master-1"].setRotation(90 * D2R);
			me["FUEL-ENG-Master-1"].setColor(0.7333,0.3803,0);
			me["FUEL-ENG-1-pipe"].setColor(0.7333,0.3803,0);
		}

		# this is now bound to the ENG master switch
		# TODO use the valve prop and add amber if diffrence between eng master and valve
		# TODO add transition state
		# TODO fix amber/green at the same time when closed
		if (getprop("/controls/engines/engine[1]/cutoff-switch") == 0) {
			me["FUEL-ENG-Master-2"].setRotation(0);
			me["FUEL-ENG-Master-2"].setColor(0.0509,0.7529,0.2941);
			me["FUEL-ENG-2-pipe"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["FUEL-ENG-Master-2"].setRotation(90 * D2R);
			me["FUEL-ENG-Master-2"].setColor(0.7333,0.3803,0);
			me["FUEL-ENG-2-pipe"].setColor(0.7333,0.3803,0);
		}

		# this is now bound to the XFEED switch
		# TODO use the valve prop
		# TODO add amber when disagree between switch and btn
		# TODO add transition state
		if (getprop("/controls/fuel/x-feed") == 1) {
			me["FUEL-XFEED"].setRotation(0);
			me["FUEL-XFEED-pipes"].show();
		} else {
			me["FUEL-XFEED"].setRotation(90 * D2R);
			me["FUEL-XFEED-pipes"].hide();
		}

		# TODO add LO indication
		# TODO fix amber/green at the same time when closed
		if (getprop("controls/fuel/tank0pump1") == 1) {
			me["FUEL-Pump-Left-1-Open"].show();
			me["FUEL-Pump-Left-1-Closed"].hide();
			me["FUEL-Pump-Left-1"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["FUEL-Pump-Left-1-Open"].hide();
			me["FUEL-Pump-Left-1-Closed"].show();
			me["FUEL-Pump-Left-1"].setColor(0.7333,0.3803,0);		
		}

		# TODO add LO indication
		# TODO fix amber/green at the same time when closed
		if (getprop("controls/fuel/tank0pump2") == 1) {
			me["FUEL-Pump-Left-2-Open"].show();
			me["FUEL-Pump-Left-2-Closed"].hide();
			me["FUEL-Pump-Left-2"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["FUEL-Pump-Left-2-Open"].hide();
			me["FUEL-Pump-Left-2-Closed"].show();
			me["FUEL-Pump-Left-2"].setColor(0.7333,0.3803,0);
		}

		# TODO fix amber/green at the same time when closed
		# TODO add functionality to match FCOM 1.28.20 "Amber: Transfer valve is open, whereas commanded closed in automatic or manual mode" 
		if (getprop("controls/fuel/tank1pump1") == 1) {
			me["FUEL-Pump-Center-1-Open"].show();
			me["FUEL-Pump-Center-1-Closed"].hide();
			me["FUEL-Pump-Center-1"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["FUEL-Pump-Center-1-Open"].hide();
			me["FUEL-Pump-Center-1-Closed"].show();
			me["FUEL-Pump-Center-1"].setColor(0.7333,0.3803,0);
		}

		# TODO add LO indication
		# TODO fix amber/green at the same time when closed
		if (getprop("controls/fuel/tank1pump2") == 1) {
			me["FUEL-Pump-Center-2-Open"].show();
			me["FUEL-Pump-Center-2-Closed"].hide();
			me["FUEL-Pump-Center-2"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["FUEL-Pump-Center-2-Open"].hide();
			me["FUEL-Pump-Center-2-Closed"].show();
			me["FUEL-Pump-Center-2"].setColor(0.7333,0.3803,0);
		}

		# TODO add LO indication
		# TODO fix amber/green at the same time when closed
		if (getprop("controls/fuel/tank2pump1") == 1) {
			me["FUEL-Pump-Right-1-Open"].show();
			me["FUEL-Pump-Right-1-Closed"].hide();
			me["FUEL-Pump-Right-1"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["FUEL-Pump-Right-1-Open"].hide();
			me["FUEL-Pump-Right-1-Closed"].show();
			me["FUEL-Pump-Right-1"].setColor(0.7333,0.3803,0);
		}

		# TODO add LO indication
		# TODO fix amber/green at the same time when closed
		if (getprop("controls/fuel/tank2pump2") == 1) {
			me["FUEL-Pump-Right-2-Open"].show();
			me["FUEL-Pump-Right-2-Closed"].hide();
			me["FUEL-Pump-Right-2"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["FUEL-Pump-Right-2-Open"].hide();
			me["FUEL-Pump-Right-2-Closed"].show();
			me["FUEL-Pump-Right-2"].setColor(0.7333,0.3803,0);
		}

		# Hide not yet implemented features
		# TODO add them
		me["FUEL-Left-blocked"].hide();
		me["FUEL-Right-blocked"].hide();
		me["FUEL-Center-blocked"].hide();
		me["FUEL-Left-Outer-Inacc"].hide();
		me["FUEL-Left-Inner-Inacc"].hide();
		me["FUEL-Right-Outer-Inacc"].hide();
		me["FUEL-Right-Inner-Inacc"].hide();
		me["FUEL-Center-Inacc"].hide();
		me["FUEL-Left-Tranfser"].hide();
		me["FUEL-Right-Tranfser"].hide();
		me["FUEL-Left-Outer-temp"].hide();
		me["FUEL-Left-Inner-temp"].hide();
		me["FUEL-Right-Outer-temp"].hide();
		me["FUEL-Right-Inner-temp"].hide();
		
		me.updateBottomStatus();
	},
};

var canvas_lowerECAM_press = {
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_press, canvas_lowerECAM_base]};
		m.init(canvas_group, file);
		
		return m;
	},
	getKeys: func() {
		return ["TAT","SAT","GW","UTCh","UTCm"];
	},
	update: func() {
		
		me.updateBottomStatus();
	},
};

var canvas_lowerECAM_status = {
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_status, canvas_lowerECAM_base]};
		m.init(canvas_group, file);
		
		return m;
	},
	getKeys: func() {
		return ["TAT","SAT","GW","UTCh","UTCm"];
	},
	update: func() {
		
		me.updateBottomStatus();
	},
};

var canvas_lowerECAM_hyd = {
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_hyd, canvas_lowerECAM_base]};
		m.init(canvas_group, file);
		
		return m;
	},
	getKeys: func() {
		return ["TAT","SAT","GW","UTCh","UTCm","Green-Indicator","Blue-Indicator","Yellow-Indicator","Press-Green","Press-Blue","Press-Yellow","Green-Line","Blue-Line","Yellow-Line","PTU-Supply-Line","PTU-supply-yellow","PTU-supply-green","PTU-connection",
		"PTU-Auto-or-off","RAT-label","RAT-stowed","RAT-not-stowed","ELEC-Yellow-off","ELEC-Yellow-on","ELEC-Yellow-label","ELEC-OVTH-Yellow","ELEC-Blue-label","ELEC-OVHT-Blue","ELEC-OVHT-Yellow","Pump-Green-label","Pump-Yellow-label","Pump-Green",
		"Pump-LOPR-Green","Pump-Green-off","Pump-Green-on","Pump-Yellow","Pump-LOPR-Yellow","Pump-Yellow-off","Pump-Yellow-on","Pump-Blue","Pump-LOPR-Blue","Pump-Blue-off","Pump-Blue-on","Fire-Valve-Green","Fire-Valve-Yellow","LO-AIR-PRESS-Green",
		"LO-AIR-PRESS-Yellow","LO-AIR-PRESS-Blue","OVHT-Green","OVHT-Blue","OVHT-Yellow","Quantity-Indicator-Green","Quantity-Indicator-Blue","Quantity-Indicator-Yellow","Green-label","Blue-label","Yellow-label"];
	},
	update: func() {
		blue_psi = getprop("/systems/hydraulic/blue-psi");
		green_psi = getprop("/systems/hydraulic/green-psi");
		yellow_psi = getprop("/systems/hydraulic/yellow-psi");

		me["Press-Green"].setText(sprintf("%s", green_psi));
		me["Press-Blue"].setText(sprintf("%s", blue_psi));
		me["Press-Yellow"].setText(sprintf("%s", yellow_psi));

		if (blue_psi >= 1500) {
			me["Blue-Line"].setColor(0.0509,0.7529,0.2941);
			me["Blue-Line"].setColorFill(0.0509,0.7529,0.2941);
			me["Blue-Indicator"].setColor(0.0509,0.7529,0.2941);
			me["Press-Blue"].setColor(0.0509,0.7529,0.2941);
			me["Blue-label"].setColor(0.8078,0.8039,0.8078);
		} else {
			me["Blue-Line"].setColor(0.7333,0.3803,0);
			me["Blue-Line"].setColorFill(0.7333,0.3803,0);
			me["Blue-Indicator"].setColor(0.7333,0.3803,0);
			me["Press-Blue"].setColor(0.7333,0.3803,0);
			me["Blue-label"].setColor(0.7333,0.3803,0);
		}

		if (yellow_psi >= 1500) {
			me["Yellow-Line"].setColor(0.0509,0.7529,0.2941);
			me["Yellow-Line"].setColorFill(0.0509,0.7529,0.2941);
			me["Yellow-Indicator"].setColor(0.0509,0.7529,0.2941);
			me["Press-Yellow"].setColor(0.0509,0.7529,0.2941);
			me["Yellow-label"].setColor(0.8078,0.8039,0.8078);
		} else {
			me["Yellow-Line"].setColor(0.7333,0.3803,0);
			me["Yellow-Line"].setColorFill(0.7333,0.3803,0);
			me["Yellow-Indicator"].setColor(0.7333,0.3803,0);
			me["Press-Yellow"].setColor(0.7333,0.3803,0);
			me["Yellow-label"].setColor(0.7333,0.3803,0);
		}

		if (green_psi >= 1500) {
			me["Green-Line"].setColor(0.0509,0.7529,0.2941);
			me["Green-Line"].setColorFill(0.0509,0.7529,0.2941);
			me["Green-Indicator"].setColor(0.0509,0.7529,0.2941);
			me["Press-Green"].setColor(0.0509,0.7529,0.2941);
			me["Green-label"].setColor(0.8078,0.8039,0.8078);
		} else {
			me["Green-Line"].setColor(0.7333,0.3803,0);
			me["Green-Line"].setColorFill(0.7333,0.3803,0);
			me["Green-Indicator"].setColor(0.7333,0.3803,0);
			me["Press-Green"].setColor(0.7333,0.3803,0);
			me["Green-label"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/controls/hydraulic/ptu") == 1 and getprop("/systems/hydraulic/ptu-fault") == 0) {
			me["PTU-connection"].setColor(0.0509,0.7529,0.2941);

			if (getprop("/systems/hydraulic/ptu-active") == 1) {
				if (getprop("/systems/hydraulic/ptu-supplies") == "yellow") {
					print("if");
					me["PTU-Supply-Line"].show();
					me["PTU-supply-yellow"].show();
					me["PTU-supply-green"].hide();
					me["PTU-Auto-or-off"].hide();
				} else if (getprop("/systems/hydraulic/ptu-supplies") == "green") {
					print("else if");
					me["PTU-Supply-Line"].show();
					me["PTU-supply-yellow"].hide();
					me["PTU-supply-green"].show();
					me["PTU-Auto-or-off"].hide();
				}
			} else {
				me["PTU-Auto-or-off"].setColor(0.0509,0.7529,0.2941);
				me["PTU-Supply-Line"].hide();
				me["PTU-supply-yellow"].hide();
				me["PTU-supply-green"].hide();
				me["PTU-Auto-or-off"].show();
			}
		} else {
			me["PTU-connection"].setColor(0.7333,0.3803,0);
			me["PTU-Auto-or-off"].setColor(0.7333,0.3803,0);
			me["PTU-Supply-Line"].hide();
			me["PTU-supply-yellow"].hide();
			me["PTU-supply-green"].hide();
			me["PTU-Auto-or-off"].show();
		}

		if (getprop("/engines/engine[0]/n2-actual") >= 59) {
			me["Pump-Green-label"].setColor(0.8078,0.8039,0.8078);
		} else {
			me["Pump-Green-label"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/engines/engine[1]/n2-actual") >= 59) {
			me["Pump-Yellow-label"].setColor(0.8078,0.8039,0.8078);
		} else {
			me["Pump-Yellow-label"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/controls/hydraulic/eng1-pump") == 1) {
			me["Pump-Green-off"].hide();
			if (yellow_psi >= 1500) {
				me["Pump-Green-on"].show();
				me["Pump-LOPR-Green"].hide();
				me["Pump-Green"].setColor(0.0509,0.7529,0.2941);
				me["Pump-Green"].setColorFill(0.0509,0.7529,0.2941);
			} else {
				me["Pump-Green-on"].hide();
				me["Pump-LOPR-Green"].show();
				me["Pump-Green"].setColor(0.7333,0.3803,0);
				me["Pump-Green"].setColorFill(0.7333,0.3803,0);
			}
		} else {
			me["Pump-Green-off"].show();
			me["Pump-Green-on"].hide();
			me["Pump-LOPR-Green"].hide();
			me["Pump-Green"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/controls/hydraulic/eng2-pump") == 1) {
			me["Pump-Yellow-off"].hide();
			if (yellow_psi >= 1500) {
				me["Pump-Yellow-on"].show();
				me["Pump-LOPR-Yellow"].hide();
				me["Pump-Yellow"].setColor(0.0509,0.7529,0.2941);
			} else {
				me["Pump-Yellow-on"].hide();
				me["Pump-LOPR-Yellow"].show();
				me["Pump-Yellow"].setColor(0.7333,0.3803,0);
			}
		} else {
			me["Pump-Yellow-off"].show();
			me["Pump-Yellow-on"].hide();
			me["Pump-LOPR-Yellow"].hide();
			me["Pump-Yellow"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/controls/hydraulic/elec-pump-blue") == 1) {
			me["Pump-Blue-off"].hide();
			if (blue_psi >= 1500) {
				me["Pump-Blue-on"].show();
				me["Pump-LOPR-Blue"].hide();
				me["Pump-Blue"].setColor(0.0509,0.7529,0.2941);
			} else {
				me["Pump-LOPR-Blue"].show();
				me["Pump-Blue-on"].hide();
				me["Pump-Blue"].setColor(0.7333,0.3803,0);
			}
		} else {
			me["Pump-Blue-off"].show();
			me["Pump-Blue-on"].hide();
			me["Pump-LOPR-Blue"].hide();
			me["Pump-Blue"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/controls/hydraulic/elec-pump-yellow") == 0) {
			me["ELEC-Yellow-on"].hide();
			me["ELEC-Yellow-off"].show();
		} else {
			me["ELEC-Yellow-on"].show();
			me["ELEC-Yellow-off"].hide();
			if (getprop("/systems/hydraulic/yellow-psi") >= 1500) {
				me["ELEC-Yellow-on"].setColor(0.0509,0.7529,0.2941);
			} else {
				me["ELEC-Yellow-on"].setColor(0.7333,0.3803,0);
			}
		}

		if (getprop("/systems/hydraulic/yellow-resv-lo-air-press") == 1) {
			me["LO-AIR-PRESS-Yellow"].show();
		} else {
			me["LO-AIR-PRESS-Yellow"].hide();
		}

		if (getprop("/systems/hydraulic/blue-resv-lo-air-press") == 1) {
			me["LO-AIR-PRESS-Blue"].show();
		} else {
			me["LO-AIR-PRESS-Blue"].hide();
		}

		if (getprop("/systems/hydraulic/green-resv-lo-air-press") == 1) {
			me["LO-AIR-PRESS-Green"].show();
		} else {
			me["LO-AIR-PRESS-Green"].hide();
		}

		if (getprop("/systems/hydraulic/elec-pump-yellow-ovht") == 1) {
			me["ELEC-OVHT-Yellow"].show();
		} else {
			me["ELEC-OVHT-Yellow"].hide();
		}

		if (getprop("/systems/hydraulic/elec-pump-blue-ovht") == 1) {
			me["ELEC-OVHT-Blue"].show();
		} else {
			me["ELEC-OVHT-Blue"].hide();
		}

		if (getprop("/controls/hydraulic/rat-deployed") == 1) {
			me["RAT-stowed"].hide();
			me["RAT-not-stowed"].show();
		} else {
			me["RAT-stowed"].show();
			me["RAT-not-stowed"].hide();
		}

		if (getprop("/systems/hydraulic/yellow-resv-ovht") == 1) {
			me["OVHT-Yellow"].show();
		} else {
			me["OVHT-Yellow"].hide();
		}

		if (getprop("/systems/hydraulic/blue-resv-ovht") == 1) {
			me["OVHT-Green"].show();
		} else {
			me["OVHT-Green"].hide();
		}

		if (getprop("/systems/hydraulic/green-resv-ovht") == 1) {
			me["OVHT-Blue"].show();
		} else {
			me["OVHT-Blue"].hide();
		}

		if (getprop("/systems/electrical/bus/ac1") > 110) {
			me["ELEC-Blue-label"].setColor(0.8078,0.8039,0.8078);
		} else {
			me["ELEC-Blue-label"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/systems/electrical/bus/ac2") > 110) {
			me["ELEC-Yellow-label"].setColor(0.8078,0.8039,0.8078);
		} else {
			me["ELEC-Yellow-label"].setColor(0.7333,0.3803,0);
		}

		if (getprop("/systems/hydraulic/yellow-fire-valve") == 1) {
			me["Fire-Valve-Yellow"].setColor(0.7333,0.3803,0);
			me["Fire-Valve-Yellow"].setRotation(90 * D2R)
		} else {
			me["Fire-Valve-Yellow"].setColor(0.0509,0.7529,0.2941);
			me["Fire-Valve-Yellow"].setRotation(0)
		}
		
		if (getprop("/systems/hydraulic/green-fire-valve") == 1) {
			me["Fire-Valve-Green"].setColor(0.7333,0.3803,0);
			me["Fire-Valve-Green"].setRotation(90 * D2R)
		} else {
			me["Fire-Valve-Green"].setColor(0.0509,0.7529,0.2941);
			me["Fire-Valve-Green"].setRotation(0)
		}
		
		me.updateBottomStatus();
	},
};

var canvas_lowerECAM_wheel = {
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_wheel, canvas_lowerECAM_base]};
		m.init(canvas_group, file);
		
		return m;
	},
	getKeys: func() {
		return ["TAT","SAT","GW","UTCh","UTCm","lgctltext","NORMbrk","NWStext","leftdoor","rightdoor","nosegeardoorL","nosegeardoorR","autobrk","autobrkind","NWS","NWSrect","normbrk-rect","altnbrk","normbrkhyd","spoiler1Rex","spoiler1Rrt","spoiler2Rex",
		"spoiler2Rrt","spoiler3Rex","spoiler3Rrt","spoiler4Rex","spoiler4Rrt","spoiler5Rex","spoiler5Rrt","spoiler1Lex","spoiler1Lrt","spoiler2Lex","spoiler2Lrt","spoiler3Lex","spoiler3Lrt","spoiler4Lex","spoiler4Lrt","spoiler5Lex","spoiler5Lrt","spoiler1Rf",
		"spoiler2Rf","spoiler3Rf","spoiler4Rf","spoiler5Rf","spoiler1Lf","spoiler2Lf","spoiler3Lf","spoiler4Lf","spoiler5Lf","ALTNbrk","altnbrkhyd","altnbrk-rect","antiskidtext","brakearrow","accupress_text","accuonlyarrow","accuonly","braketemp1","normbrkhyd",
		"braketemp2","braketemp3","braketemp4","leftuplock","noseuplock","rightuplock","Triangle-Left1","Triangle-Left2","Triangle-Nose1","Triangle-Nose2","Triangle-Right1","Triangle-Right2","BSCUrect1","BSCUrect2","BSCU1","BSCU2"];
	},
	update: func() {
		blue_psi = getprop("/systems/hydraulic/blue-psi");
		green_psi = getprop("/systems/hydraulic/green-psi");
		yellow_psi = getprop("/systems/hydraulic/yellow-psi");
		autobrakemode = getprop("/controls/autobrake/mode");
		nosegear = getprop("gear/gear[0]/position-norm");
		leftgear = getprop("gear/gear[1]/position-norm");
		rightgear = getprop("gear/gear[2]/position-norm");
		leftdoor = getprop("/systems/hydraulic/gear/door-left");
		rightdoor = getprop("/systems/hydraulic/gear/door-right");
		nosedoor = getprop("/systems/hydraulic/gear/door-nose");
		gearlvr = getprop("/controls/gear/gear-down");
		askidsw = getprop("/systems/hydraulic/brakes/askidnwssw");
		brakemode = getprop("/systems/hydraulic/brakes/mode");
		accum = getprop("/systems/hydraulic/brakes/accumulator-pressure-psi");
		
		# L/G CTL
		if ((leftgear == 0 or nosegear == 0 or rightgear == 0 and gearlvr == 0) or (leftgear == 1 or nosegear == 1 or rightgear == 1 and gearlvr == 1)) {
			me["lgctltext"].hide();
		} else {
			me["lgctltext"].show();
		}
		
		# NWS / Antiskid / Brakes
		if (askidsw and yellow_psi >= 1500) {
			me["NWStext"].hide();
			me["NWS"].hide();
			me["NWSrect"].hide();
			me["antiskidtext"].hide();
			me["BSCUrect1"].hide();
			me["BSCUrect2"].hide();
			me["BSCU1"].hide();
			me["BSCU2"].hide();
		} else if (!askidsw and yellow_psi >= 1500) {
			me["NWStext"].show();
			me["NWS"].show();
			me["NWS"].setColor(0.0509,0.7529,0.2941);
			me["NWSrect"].show();
			me["antiskidtext"].show();
			me["antiskidtext"].setColor(0.7333,0.3803,0);
			me["BSCUrect1"].show();
			me["BSCUrect2"].show();
			me["BSCU1"].show();
			me["BSCU2"].show();
		} else {
			me["NWStext"].show();
			me["NWS"].show();
			me["NWS"].setColor(0.7333,0.3803,0);
			me["NWSrect"].show();
			me["antiskidtext"].show();
			me["antiskidtext"].setColor(0.7333,0.3803,0);
			me["BSCUrect1"].show();
			me["BSCUrect2"].show();
			me["BSCU1"].show();
			me["BSCU2"].show();
		}
		
		if (green_psi >= 1500 and brakemode == 1) {
			me["NORMbrk"].hide();
			me["normbrk-rect"].hide();
			me["normbrkhyd"].hide();
		} else if (green_psi >= 1500 and askidsw) {
			me["NORMbrk"].show();
			me["normbrk-rect"].show();
			me["NORMbrk"].setColor(0.7333,0.3803,0);
			me["normbrkhyd"].setColor(0.0509,0.7529,0.2941);
		} else if (green_psi < 1500 or !askidsw) {
			me["NORMbrk"].show();
			me["normbrk-rect"].show();
			me["NORMbrk"].setColor(0.7333,0.3803,0);
			me["normbrkhyd"].setColor(0.7333,0.3803,0);
		}
		
		if (brakemode != 2) {
			me["ALTNbrk"].hide();
			me["altnbrk-rect"].hide();
			me["altnbrkhyd"].hide();
		} else if (yellow_psi >= 1500) {
			me["ALTNbrk"].show();
			me["altnbrk-rect"].show();
			me["altnbrkhyd"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["ALTNbrk"].show();
			me["altnbrk-rect"].show();
			me["altnbrkhyd"].setColor(0.7333,0.3803,0);
		}
		
		if (brakemode == 2 and accum < 200 and yellow_psi < 1500) {
			me["accupress_text"].show();
			me["brakearrow"].hide();
			me["accupress_text"].setColor(0.7333,0.3803,0);
		} else if (brakemode == 2 and accum > 200 and yellow_psi >= 1500){
			me["accupress_text"].show();
			me["brakearrow"].show();
			me["accupress_text"].setColor(0.0509,0.7529,0.2941);
		} else if (brakemode == 2 and accum > 200 and yellow_psi < 1500) {
			me["accuonlyarrow"].show();
			me["accuonly"].show();
			me["brakearrow"].hide();
			me["accupress_text"].hide();
		} else {
			me["accuonlyarrow"].hide();
			me["accuonly"].hide();
			me["brakearrow"].hide();
			me["accupress_text"].hide();
		}
		
		# Gear Doors
		me["leftdoor"].setRotation(getprop("/ECAM/Lower/door-left") * D2R);
		me["rightdoor"].setRotation(getprop("/ECAM/Lower/door-right") * D2R);
		me["nosegeardoorL"].setRotation(getprop("/ECAM/Lower/door-nose-left") * D2R);
		me["nosegeardoorR"].setRotation(getprop("/ECAM/Lower/door-nose-right") * D2R);
		
		if (nosedoor == 0) {
			me["nosegeardoorL"].setColorFill(0.0509,0.7529,0.2941);
			me["nosegeardoorR"].setColorFill(0.0509,0.7529,0.2941);
		} else {
			me["nosegeardoorL"].setColorFill(0.7333,0.3803,0);
			me["nosegeardoorR"].setColorFill(0.7333,0.3803,0);
		}
		
		if (leftdoor == 0) {
			me["leftdoor"].setColorFill(0.0509,0.7529,0.2941);
		} else {
			me["leftdoor"].setColorFill(0.7333,0.3803,0);
		}
		
		if (rightdoor == 0) {
			me["rightdoor"].setColorFill(0.0509,0.7529,0.2941);
		} else {
			me["rightdoor"].setColorFill(0.7333,0.3803,0);
		}
		
		# Triangles
		if (leftgear < 0.2 or leftgear > 0.8) {
			me["Triangle-Left1"].hide();
			me["Triangle-Left2"].hide();
		} else {
			me["Triangle-Left1"].show();
			me["Triangle-Left2"].show();
		}
		
		if (leftgear == 1) {
			me["Triangle-Left1"].setColor(0.0509,0.7529,0.2941);
			me["Triangle-Left2"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["Triangle-Left1"].setColor(1,0,0);
			me["Triangle-Left2"].setColor(1,0,0);
		}
		
		if (nosegear < 0.2 or nosegear > 0.8) {
			me["Triangle-Nose1"].hide();
			me["Triangle-Nose2"].hide();
		} else {
			me["Triangle-Nose1"].show();
			me["Triangle-Nose2"].show();
		}
		
		if (nosegear == 1) {
			me["Triangle-Nose1"].setColor(0.0509,0.7529,0.2941);
			me["Triangle-Nose2"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["Triangle-Nose1"].setColor(1,0,0);
			me["Triangle-Nose2"].setColor(1,0,0);
		}
		
		if (rightgear < 0.2 or rightgear > 0.8) {
			me["Triangle-Right1"].hide();
			me["Triangle-Right2"].hide();
		} else {
			me["Triangle-Right1"].show();
			me["Triangle-Right2"].show();
		}
		
		if (rightgear == 1) {
			me["Triangle-Right1"].setColor(0.0509,0.7529,0.2941);
			me["Triangle-Right2"].setColor(0.0509,0.7529,0.2941);
		} else {
			me["Triangle-Right1"].setColor(1,0,0);
			me["Triangle-Right2"].setColor(1,0,0);
		}
		
		# Autobrake
		if (autobrakemode == 0) {
			me["autobrkind"].hide();
		} elsif (autobrakemode == 1) {
			me["autobrkind"].show();
			me["autobrkind"].setText(sprintf("%s", "LO"));
		} elsif (autobrakemode == 2) {
			me["autobrkind"].show();
			me["autobrkind"].setText(sprintf("%s", "MED"));
		} elsif (autobrakemode == 3) {
			me["autobrkind"].show();
			me["autobrkind"].setText(sprintf("%s", "MAX"));
		}
		
		if (getprop("/controls/autobrake/mode") != 0) {
			me["autobrk"].show();
		} elsif (getprop("/controls/autobrake/mode") == 0) {
			me["autobrk"].hide();
		}
		
		# Spoilers
		if (getprop("/controls/flight/spoiler-l1") < 0.033) {
			me["spoiler1Lex"].hide();
			me["spoiler1Lrt"].show();
		} else {
			me["spoiler1Lrt"].hide();
			me["spoiler1Lex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-l2") < 0.033) {
			me["spoiler2Lex"].hide();
			me["spoiler2Lrt"].show();
		} else {
			me["spoiler2Lrt"].hide();
			me["spoiler2Lex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-l3") < 0.033) {
			me["spoiler3Lex"].hide();
			me["spoiler3Lrt"].show();
		} else {
			me["spoiler3Lrt"].hide();
			me["spoiler3Lex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-l4") < 0.033) {
			me["spoiler4Lex"].hide();
			me["spoiler4Lrt"].show();
		} else {
			me["spoiler4Lrt"].hide();
			me["spoiler4Lex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-l5") < 0.033) {
			me["spoiler5Lex"].hide();
			me["spoiler5Lrt"].show();
		} else {
			me["spoiler5Lrt"].hide();
			me["spoiler5Lex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-r1") < 0.033) {
			me["spoiler1Rex"].hide();
			me["spoiler1Rrt"].show();
		} else {
			me["spoiler1Rrt"].hide();
			me["spoiler1Rex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-r2") < 0.033) {
			me["spoiler2Rex"].hide();
			me["spoiler2Rrt"].show();
		} else {
			me["spoiler2Rrt"].hide();
			me["spoiler2Rex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-r3") < 0.033) {
			me["spoiler3Rex"].hide();
			me["spoiler3Rrt"].show();
		} else {
			me["spoiler3Rrt"].hide();
			me["spoiler3Rex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-r4") < 0.033) {
			me["spoiler4Rex"].hide();
			me["spoiler4Rrt"].show();
		} else {
			me["spoiler4Rrt"].hide();
			me["spoiler4Rex"].show();
		}
		
		if (getprop("/controls/flight/spoiler-r5") < 0.033) {
			me["spoiler5Rex"].hide();
			me["spoiler5Rrt"].show();
		} else {
			me["spoiler5Rrt"].hide();
			me["spoiler5Rex"].show();
		}
		
		# Spoiler Fail
		if (getprop("/controls/flight/spoiler-l1-failed") or green_psi < 1500) {
			me["spoiler1Lex"].setColor(0.7333,0.3803,0);
			me["spoiler1Lrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-l1") < 0.033) {
				me["spoiler1Lf"].show();
			} else {
				me["spoiler1Lf"].hide();
			}
		} else {
			me["spoiler1Lex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler1Lrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler1Lf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-l2-failed") or yellow_psi < 1500) {
			me["spoiler2Lex"].setColor(0.7333,0.3803,0);
			me["spoiler2Lrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-l2") < 0.033) {
				me["spoiler2Lf"].show();
			} else {
				me["spoiler2Lf"].hide();
			}
		} else {
			me["spoiler2Lex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler2Lrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler2Lf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-l3-failed") or blue_psi < 1500) {
			me["spoiler3Lex"].setColor(0.7333,0.3803,0);
			me["spoiler3Lrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-l3") < 0.033) {
				me["spoiler3Lf"].show();
			} else {
				me["spoiler3Lf"].hide();
			}
		} else {
			me["spoiler3Lex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler3Lrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler3Lf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-l4-failed") or yellow_psi < 1500) {
			me["spoiler4Lex"].setColor(0.7333,0.3803,0);
			me["spoiler4Lrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-l4") < 0.033) {
				me["spoiler4Lf"].show();
			} else {
				me["spoiler4Lf"].hide();
			}
		} else {
			me["spoiler4Lex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler4Lrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler4Lf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-l5-failed") or green_psi < 1500) {
			me["spoiler5Lex"].setColor(0.7333,0.3803,0);
			me["spoiler5Lrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-l5") < 0.033) {
				me["spoiler5Lf"].show();
			} else {
				me["spoiler5Lf"].hide();
			}
		} else {
			me["spoiler5Lex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler5Lrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler5Lf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-r1-failed") or green_psi < 1500) {
			me["spoiler1Rex"].setColor(0.7333,0.3803,0);
			me["spoiler1Rrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-r1") < 0.033) {
				me["spoiler1Rf"].show();
			} else {
				me["spoiler1Rf"].hide();
			}
		} else {
			me["spoiler1Rex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler1Rrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler1Rf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-r2-failed") or yellow_psi < 1500) {
			me["spoiler2Rex"].setColor(0.7333,0.3803,0);
			me["spoiler2Rrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-r2") < 0.033) {
				me["spoiler2Rf"].show();
			} else {
				me["spoiler2Rf"].hide();
			}
		} else {
			me["spoiler2Rex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler2Rrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler2Rf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-r3-failed") or blue_psi < 1500) {
			me["spoiler3Rex"].setColor(0.7333,0.3803,0);
			me["spoiler3Rrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-r3") < 0.033) {
				me["spoiler3Rf"].show();
			} else {
				me["spoiler3Rf"].hide();
			}
		} else {
			me["spoiler3Rex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler3Rrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler3Rf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-r4-failed") or yellow_psi < 1500) {
			me["spoiler4Rex"].setColor(0.7333,0.3803,0);
			me["spoiler4Rrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-r4") < 0.033) {
				me["spoiler4Rf"].show();
			} else {
				me["spoiler4Rf"].hide();
			}
		} else {
			me["spoiler4Rex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler4Rrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler4Rf"].hide();
		}
		
		if (getprop("/controls/flight/spoiler-r5-failed") or green_psi < 1500) {
			me["spoiler5Rex"].setColor(0.7333,0.3803,0);
			me["spoiler5Rrt"].setColor(0.7333,0.3803,0);
			if (getprop("/controls/flight/spoiler-r5") < 0.033) {
				me["spoiler5Rf"].show();
			} else {
				me["spoiler5Rf"].hide();
			}
		} else {
			me["spoiler5Rex"].setColor(0.0509,0.7529,0.2941);
			me["spoiler5Rrt"].setColor(0.0509,0.7529,0.2941);
			me["spoiler5Rf"].hide();
		}
		
		# Hide not yet implemented stuff
		me["braketemp1"].hide();
		me["braketemp2"].hide();
		me["braketemp3"].hide();
		me["braketemp4"].hide();
		me["leftuplock"].hide();
		me["noseuplock"].hide();
		me["rightuplock"].hide();

		me.updateBottomStatus();
	},
};

var canvas_lowerECAM_test = {
	init: func(canvas_group, file) {
		var font_mapper = func(family, weight) {
			return "LiberationFonts/LiberationSans-Regular.ttf";
		};

		canvas.parsesvg(canvas_group, file, {"font-mapper": font_mapper});
		
		var svg_keys = me.getKeys();
		foreach(var key; svg_keys) {
			me[key] = canvas_group.getElementById(key);
		}

		me.page = canvas_group;

		return me;
	},
	new: func(canvas_group, file) {
		var m = {parents: [canvas_lowerECAM_test]};
		m.init(canvas_group, file);

		return m;
	},
	getKeys: func() {
		return ["Test_white","Test_text"];
	},
	update: func() {
		if (getprop("/instrumentation/du/du4-test-time") + 1 >= elapsedtime) {
			me["Test_white"].show();
			me["Test_text"].hide();
		} else {
			me["Test_white"].hide();
			me["Test_text"].show();
		}
	},
};

setlistener("sim/signals/fdm-initialized", func {
	lowerECAM_display = canvas.new({
		"name": "lowerECAM",
		"size": [1024, 1024],
		"view": [1024, 1024],
		"mipmapping": 1
	});
	lowerECAM_display.addPlacement({"node": "lecam.screen"});
	var groupApu = lowerECAM_display.createGroup();
	var groupBleed = lowerECAM_display.createGroup();
	var groupCond = lowerECAM_display.createGroup();
	var groupDoor = lowerECAM_display.createGroup();
	var groupElec = lowerECAM_display.createGroup();
	var groupEng = lowerECAM_display.createGroup();
	var groupFctl = lowerECAM_display.createGroup();
	var groupFuel = lowerECAM_display.createGroup();
	var groupPress = lowerECAM_display.createGroup();
	var groupStatus = lowerECAM_display.createGroup();
	var groupHyd = lowerECAM_display.createGroup();
	var groupWheel = lowerECAM_display.createGroup();
	var group_test = lowerECAM_display.createGroup();

	lowerECAM_apu = canvas_lowerECAM_apu.new(groupApu, "Aircraft/IDG-A32X/Models/Instruments/Lower-ECAM/res/apu.svg");
	lowerECAM_bleed = canvas_lowerECAM_bleed.new(groupBleed, "Aircraft/IDG-A32X/Models/Instruments/Lower-ECAM/res/bleed.svg");
	lowerECAM_cond = canvas_lowerECAM_cond.new(groupCond, "Aircraft/IDG-A32X/Models/Instruments/Lower-ECAM/res/cond.svg");
	lowerECAM_door = canvas_lowerECAM_door.new(groupDoor, "Aircraft/IDG-A32X/Models/Instruments/Lower-ECAM/res/door.svg");
	lowerECAM_elec = canvas_lowerECAM_elec.new(groupElec, "Aircraft/IDG-A32X/Models/Instruments/Lower-ECAM/res/elec.svg");
	lowerECAM_eng = canvas_lowerECAM_eng.new(groupEng, "Aircraft/IDG-A32X/Models/Instruments/Lower-ECAM/res/eng.svg");
	lowerECAM_fctl = canvas_lowerECAM_fctl.new(groupFctl, "Aircraft/IDG-A32X/Models/Instruments/Lower-ECAM/res/fctl.svg");
	lowerECAM_fuel = canvas_lowerECAM_fuel.new(groupFuel, "Aircraft/IDG-A32X/Models/Instruments/Lower-ECAM/res/fuel.svg");
	lowerECAM_press = canvas_lowerECAM_press.new(groupPress, "Aircraft/IDG-A32X/Models/Instruments/Lower-ECAM/res/press.svg");
	lowerECAM_status = canvas_lowerECAM_status.new(groupStatus, "Aircraft/IDG-A32X/Models/Instruments/Lower-ECAM/res/status.svg");
	lowerECAM_hyd = canvas_lowerECAM_hyd.new(groupHyd, "Aircraft/IDG-A32X/Models/Instruments/Lower-ECAM/res/hyd.svg");
	lowerECAM_wheel = canvas_lowerECAM_wheel.new(groupWheel, "Aircraft/IDG-A32X/Models/Instruments/Lower-ECAM/res/wheel.svg");
	lowerECAM_test = canvas_lowerECAM_test.new(group_test, "Aircraft/IDG-A32X/Models/Instruments/Common/res/du-test.svg");
	
	lowerECAM_update.start();
});

var lowerECAM_update = maketimer(0.05, func {
	canvas_lowerECAM_base.update();
});

var showLowerECAM = func {
	var dlg = canvas.Window.new([512, 512], "dialog").set("resize", 1);
	dlg.setCanvas(lowerECAM_display);
}