258 lines
No EOL
24 KiB
Text
258 lines
No EOL
24 KiB
Text
# A3XX Electronic Centralised Aircraft Monitoring System
|
|
|
|
# Copyright (c) 2019 Jonathan Redpath (legoboyvdlp)
|
|
|
|
# messages stored in vectors
|
|
|
|
# Left E/WD
|
|
var warningsOld = std.Vector.new([
|
|
var lg_not_dn = warning.new(msg: "L/G GEAR NOT DOWN", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
var pack1_fault = warning.new(msg: "AIR PACK 1 FAULT ", active: 0, colour: "a", aural: "chime", light: "caution", noRepeat: 0),
|
|
var pack1_fault_subwarn_1 = warning.new(msg: "-PACK 1.............OFF ", active: 0, colour: "b", aural: "none", light: "none", noRepeat: 0),
|
|
var pack2_fault = warning.new(msg: "AIR PACK 2 FAULT ", active: 0, colour: "a", aural: "chime", light: "caution", noRepeat: 0),
|
|
var pack2_fault_subwarn_1 = warning.new(msg: "-PACK 2.............OFF ", active: 0, colour: "b", aural: "none", light: "none", noRepeat: 0),
|
|
var park_brk_on = warning.new(msg: "PARK BRK ON", active: 0, colour: "a", aural: "chime", light: "caution", noRepeat: 0)
|
|
]);
|
|
|
|
var warnings = std.Vector.new([
|
|
var flap_not_zero = warning.new(msg: "F/CTL FLAP LVR NOT ZERO", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
|
|
# Config
|
|
var slats_config = warning.new(msg: "CONFIG", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
var slats_config_1 = warning.new(msg: "SLATS NOT IN T.O. CONFIG", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
var flaps_config = warning.new(msg: "CONFIG", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
var flaps_config_1 = warning.new(msg: "FLAPS NOT IN T.O. CONFIG", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
var spd_brk_config = warning.new(msg: "CONFIG", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
var spd_brk_config_1 = warning.new(msg: "SPD BRK NOT RETRACTED", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
var pitch_trim_config = warning.new(msg: "CONFIG PITCH TRIM", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
var pitch_trim_config_1 = warning.new(msg: " NOT IN T.O. RANGE", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
var rud_trim_config = warning.new(msg: "CONFIG RUD TRIM", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
var rud_trim_config_1 = warning.new(msg: " NOT IN T.O. RANGE", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
var park_brk_config = warning.new(msg: "CONFIG PARK BRK ON", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
|
|
|
|
# Autopilot
|
|
var ap_offw = warning.new(msg: "AUTO FLT AP OFF", active: 0, colour: "r", aural: "calv", light: "warning", noRepeat: 0),
|
|
var athr_offw = warning.new(msg: "AUTO FLT A/THR OFF", active: 0, colour: "a", aural: "chime", light: "caution", noRepeat: 0),
|
|
var athr_offw_1 = warning.new(msg: "-THR LEVERS........MOVE", active: 0, colour: "b", aural: "none", light: "none", noRepeat: 0),
|
|
var athr_lock = warning.new(msg: "ENG THRUST LOCKED", active: 0, colour: "a", aural: "chime", light: "caution", noRepeat: 0),
|
|
var athr_lock_1 = warning.new(msg: "-THR LEVERS........MOVE", active: 0, colour: "b", aural: "none", light: "none", noRepeat: 0),
|
|
var athr_lim = warning.new(msg: "AUTO FLT A/THR LIMITED", active: 0, colour: "a", aural: "chime", light: "caution", noRepeat: 0),
|
|
var athr_lim_1 = warning.new(msg: "-THR LEVERS........MOVE", active: 0, colour: "b", aural: "none", light: "none", noRepeat: 0)
|
|
]);
|
|
|
|
var leftmemos = std.Vector.new([
|
|
var company_alert = warning.new(msg: "COMPANY ALERT", active: 0, colour: "g", aural: "buzz", light: "none", noRepeat: 0), # Not yet implemented, buzzer sound
|
|
var refuelg = warning.new(msg: "REFUELG", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
|
|
var irs_in_align = warning.new(msg: "IRS IN ALIGN", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0), # Not yet implemented
|
|
var gnd_splrs = warning.new(msg: "GND SPLRS ARMED", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
|
|
var seatbelts = warning.new(msg: "SEAT BELTS", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
|
|
var nosmoke = warning.new(msg: "NO SMOKING", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
|
|
var strobe_lt_off = warning.new(msg: "STROBE LT OFF", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
|
|
var outr_tk_fuel_xfrd = warning.new(msg: "OUTR TK FUEL XFRD", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0), # Not yet implemented
|
|
var fob_3T = warning.new(msg: "FOB BELOW 3T", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
|
|
var gpws_flap_mode_off = warning.new(msg: "GPWS FLAP MODE OFF", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
|
|
var atc_datalink_stby = warning.new(msg: "ATC DATALINK STBY", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0), # Not yet implemented
|
|
var company_datalink_stby = warning.new(msg: "COMPANY DATALINK STBY", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0) # Not yet implemented
|
|
]);
|
|
|
|
# Right E/WD
|
|
|
|
var specialLines = std.Vector.new([
|
|
var to_inhibit = memo.new(msg: "T.O. INHIBIT", active: 0, colour: "m"),
|
|
var ldg_inhibit = memo.new(msg: "LDG INHIBIT", active: 0, colour: "m"),
|
|
var land_asap_r = memo.new(msg: "LAND ASAP", active: 0, colour: "r"),
|
|
var land_asap_a = memo.new(msg: "LAND ASAP", active: 0, colour: "a"),
|
|
var ap_off = memo.new(msg: "AP OFF", active: 0, colour: "r"),
|
|
var athr_off = memo.new(msg: "A/THR OFF", active: 0, colour: "a"),
|
|
]);
|
|
|
|
var secondaryFailures = std.Vector.new([
|
|
var secondary_bleed = memo.new(msg: "•AIR BLEED", active: 0, colour: "a"), # Not yet implemented
|
|
var secondary_press = memo.new(msg: "•CAB PRESS", active: 0, colour: "a"), # Not yet implemented
|
|
var secondary_vent = memo.new(msg: "•AVNCS VENT", active: 0, colour: "a"), # Not yet implemented
|
|
var secondary_elec = memo.new(msg: "•ELEC", active: 0, colour: "a"), # Not yet implemented
|
|
var secondary_hyd = memo.new(msg: "•HYD", active: 0, colour: "a"), # Not yet implemented
|
|
var secondary_fuel = memo.new(msg: "•FUEL", active: 0, colour: "a"), # Not yet implemented
|
|
var secondary_cond = memo.new(msg: "•AIR COND", active: 0, colour: "a"), # Not yet implemented
|
|
var secondary_brake = memo.new(msg: "•BRAKES", active: 0, colour: "a"), # Not yet implemented
|
|
var secondary_wheel = memo.new(msg: "•WHEEL", active: 0, colour: "a"), # Not yet implemented
|
|
var secondary_fctl = memo.new(msg: "•F/CTL", active: 0, colour: "a"), # Not yet implemented
|
|
]);
|
|
|
|
var memos = std.Vector.new([
|
|
var spd_brk = memo.new(msg: "SPEED BRK", active: 0, colour: "g"),
|
|
var park_brk = memo.new(msg: "PARK BRK", active: 0, colour: "g"),
|
|
var ptu = memo.new(msg: "HYD PTU", active: 0, colour: "g"),
|
|
var rat = memo.new(msg: "RAT OUT", active: 0, colour: "g"),
|
|
var emer_gen = memo.new(msg: "EMER GEN", active: 0, colour: "g"),
|
|
var ram_air = memo.new(msg: "RAM AIR ON", active: 0, colour: "g"),
|
|
var nw_strg_disc = memo.new(msg: "NW STRG DISC", active: 0, colour: "g"),
|
|
var ignition = memo.new(msg: "IGNITION", active: 0, colour: "g"),
|
|
var cabin_ready = memo.new(msg: "CABIN READY", active: 0, colour: "g"), # Not yet implemented
|
|
var pred_ws_off = memo.new(msg: "PRED W/S OFF", active: 0, colour: "g"), # Not yet implemented
|
|
var terr_stby = memo.new(msg: "TERR STBY", active: 0, colour: "g"), # Not yet implemented
|
|
var tcas_stby = memo.new(msg: "TCAS STBY", active: 0, colour: "g"), # Not yet implemented
|
|
var acars_call = memo.new(msg: "ACARS CALL", active: 0, colour: "g"), # Not yet implemented
|
|
var company_call = memo.new(msg: "COMPANY CALL", active: 0, colour: "g"), # Not yet implemented
|
|
var satcom_alert = memo.new(msg: "SATCOM ALERT", active: 0, colour: "g"), # Not yet implemented
|
|
var acars_msg = memo.new(msg: "ACARS MSG", active: 0, colour: "g"), # Not yet implemented
|
|
var company_msg = memo.new(msg: "COMPANY MSG", active: 0, colour: "g"), # Not yet implemented
|
|
var eng_aice = memo.new(msg: "ENG A.ICE", active: 0, colour: "g"),
|
|
var wing_aice = memo.new(msg: "WING A.ICE", active: 0, colour: "g"),
|
|
var ice_not_det = memo.new(msg: "ICE NOT DET", active: 0, colour: "g"), # Not yet implemented
|
|
var hi_alt = memo.new(msg: "HI ALT", active: 0, colour: "g"), # Not yet implemented
|
|
var apu_avail = memo.new(msg: "APU AVAIL", active: 0, colour: "g"),
|
|
var apu_bleed = memo.new(msg: "APU BLEED", active: 0, colour: "g"),
|
|
var ldg_lt = memo.new(msg: "LDG LT", active: 0, colour: "g"),
|
|
var brk_fan = memo.new(msg: "BRK FAN", active: 0, colour: "g"), # Not yet implemented
|
|
var audio3_xfrd = memo.new(msg: "AUDIO 3 XFRD", active: 0, colour: "g"), # Not yet implemented
|
|
var switchg_pnl = memo.new(msg: "SWITCHG PNL", active: 0, colour: "g"), # Not yet implemented
|
|
var gpws_flap3 = memo.new(msg: "GPWS FLAP 3", active: 0, colour: "g"),
|
|
var hf_data_ovrd = memo.new(msg: "HF DATA OVRD", active: 0, colour: "g"), # Not yet implemented
|
|
var hf_voice = memo.new(msg: "HF VOICE", active: 0, colour: "g"), # Not yet implemented
|
|
var acars_stby = memo.new(msg: "ACARS STBY", active: 0, colour: "g"), # Not yet implemented
|
|
var vhf3_voice = memo.new(msg: "VHF3 VOICE", active: 0, colour: "g"),
|
|
var auto_brk_lo = memo.new(msg: "AUTO BRK LO", active: 0, colour: "g"),
|
|
var auto_brk_med = memo.new(msg: "AUTO BRK MED", active: 0, colour: "g"),
|
|
var auto_brk_max = memo.new(msg: "AUTO BRK MAX", active: 0, colour: "g"),
|
|
var auto_brk_off = memo.new(msg: "AUTO BRK OFF", active: 0, colour: "g"), # Not yet implemented
|
|
var man_ldg_elev = memo.new(msg: "MAN LDG ELEV", active: 0, colour: "g"), # Not yet implemented
|
|
var ctr_tk_feedg = memo.new(msg: "CTR TK FEEDG", active: 0, colour: "g"),
|
|
var fuelx = memo.new(msg: "FUEL X FEED", active: 0, colour: "g")
|
|
]);
|
|
|
|
var clearWarnings = std.Vector.new();
|
|
|
|
# Status SD page
|
|
var statusLim = std.Vector.new([
|
|
var min_rat_spd = status.new(msg: "MIN RAT SPD.....140 KT", active: 0, colour: "c"), # Not yet implemented
|
|
var max_spd_gear = status.new(msg: "MAX SPD........280/.67", active: 0, colour: "c"), # Not yet implemented
|
|
var max_spd_rev = status.new(msg: "MAX SPD........300/.78", active: 0, colour: "c"), # Not yet implemented
|
|
var buffet_rev = status.new(msg: " •IF BUFFET :", active: 0, colour: "w"), # Not yet implemented
|
|
var max_spd_rev_buf = status.new(msg: "MAX SPD.............240", active: 0, colour: "c"), # Not yet implemented
|
|
var max_spd_fctl = status.new(msg: "MAX SPD........320/.77", active: 0, colour: "c"), # Not yet implemented
|
|
var max_spd_fctl2 = status.new(msg: "MAX SPD.........300 KT", active: 0, colour: "c"), # Not yet implemented
|
|
var max_spd_gr_door = status.new(msg: "MAX SPD 250/.60", active: 0, colour: "c"), # Not yet implemented
|
|
var max_alt_press = status.new(msg: "MAX FL : 100/MEA", active: 0, colour: "c"), # Not yet implemented
|
|
var gravity_fuel = status.new(msg: "-PROC:GRAVTY FUEL FEEDING", active: 0, colour: "c"), # Not yet implemented
|
|
var gear_kp_dn = status.new(msg: "L/G............KEEP DOWN", active: 0, colour: "c"), # Not yet implemented
|
|
var park_brk_only = status.new(msg: "PARK BRK ONLY", active: 0, colour: "c"), # Not yet implemented
|
|
var park_brk_only = status.new(msg: "MAX BRK PR........1000PSI", active: 0, colour: "c"), # Not yet implemented
|
|
var fuel_gravity = status.new(msg: "FUEL GRAVTY FEED", active: 0, colour: "c"), # Not yet implemented
|
|
var fctl_manvr = status.new(msg: "MANOEUVER WITH CARE", active: 0, colour: "c"), # Not yet implemented
|
|
var fctl_spdbrk_care = status.new(msg: "USE SPD BRK WITH CARE", active: 0, colour: "c"), # Not yet implemented
|
|
var fctl_spdbrk_dont = status.new(msg: "SPD BRK......DO NOT USE", active: 0, colour: "c"), # Not yet implemented
|
|
var fctl_rud_care = status.new(msg: "RUD WITH CARE ABV 160KT", active: 0, colour: "c"), # Not yet implemented
|
|
var eng_thr_changes = status.new(msg: "AVOID RAPID THR CHANGES", active: 0, colour: "c"), # Not yet implemented
|
|
var avoid_neg_g_fac = status.new(msg: "AVOID NEGATIVE G FACTOR", active: 0, colour: "c"), # Not yet implemented
|
|
var avoid_icing = status.new(msg: "AVOID ICING CONDITONS", active: 0, colour: "c"), # Not yet implemented
|
|
var severe_icing = status.new(msg: " IF A/C ICING SEVERE :", active: 0, colour: "w"), # Not yet implemented, a319 only
|
|
var severe_icing_2 = status.new(msg: "MIN SPD ALPHA PROT", active: 0, colour: "c"), # Not yet implemented, a319 only
|
|
var avoid_thr_chg = status.new(msg: "AVOID THR CHANGES", active: 0, colour: "c"), # Not yet implemented, iae only
|
|
var avoid_thr_chg_2 = status.new(msg: "AVOID RAPID THR CHANGES", active: 0, colour: "c"), # Not yet implemented, iae only
|
|
var avoid_adv_cond = status.new(msg: "AVOID ADVERSE CONDITIONS", active: 0, colour: "c"), # Not yet implemented, iae only
|
|
var atc_com_voice = status.new(msg: "ATC COM VOICE ONLY", active: 0, colour: "c") # Not yet implemented, iae only
|
|
]);
|
|
|
|
var statusApprProc = std.Vector.new([
|
|
var dual_hyd_b_g = status.new(msg: "APPR PROC DUAL HYD LO PR", active: 0, colour: "r"), # Not yet implemented
|
|
var dual_hyd_b_g_2 = status.new(msg: " •IF BLUE OVHT OUT:", active: 0, colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_g_3 = status.new(msg: "-BLUE ELEC PUMP.....AUTO", active: 0, colour: "c"), # Not yet implemented
|
|
var dual_hyd_b_g_4 = status.new(msg: " •IF GREEN OVHT OUT:", active: 0, colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_g_5 = status.new(msg: "-GREEN ENG 1 PUMP.....ON", active: 0, colour: "c"), # Not yet implemented
|
|
var dual_hyd_b_g_6 = status.new(msg: "-PTU................AUTO", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var dual_hyd_b_y = status.new(msg: "APPR PROC DUAL HYD LO PR", active: 0, colour: "r"), # Not yet implemented
|
|
var dual_hyd_b_y_2 = status.new(msg: " •IF BLUE OVHT OUT:", active: 0, colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_y_3 = status.new(msg: "-BLUE ELEC PUMP.....AUTO", active: 0, colour: "c"), # Not yet implemented
|
|
var dual_hyd_b_y_4 = status.new(msg: " •IF YELLOW OVHT OUT:", active: 0, colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_y_5 = status.new(msg: "-YELLOW ENG 2 PUMP....ON", active: 0, colour: "c"), # Not yet implemented
|
|
var dual_hyd_b_y_6 = status.new(msg: "-PTU................AUTO", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var dual_hyd_g_y = status.new(msg: "APPR PROC DUAL HYD LO PR", active: 0, colour: "r"), # Not yet implemented
|
|
var dual_hyd_g_y_2 = status.new(msg: " •IF GREEN OVHT OUT:", active: 0, colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_y_3 = status.new(msg: "-GREEN ENG 1 PUMP.....ON", active: 0, colour: "c"), # Not yet implemented
|
|
var dual_hyd_g_y_4 = status.new(msg: " •IF YELLOW OVHT OUT:", active: 0, colour: "w"), # Not yet implemented
|
|
var dual_hyd_g_y_5 = status.new(msg: "-YELLOW ENG 2 PUMP....ON", active: 0, colour: "c"), # Not yet implemented
|
|
var dual_hyd_g_y_6 = status.new(msg: "-PTU................AUTO", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var single_hyd_b = status.new(msg: "APPR PROC HYD LO PR", active: 0, colour: "a"), # Not yet implemented
|
|
var single_hyd_b_2 = status.new(msg: " •IF BLUE OVHT OUT:", active: 0, colour: "w"), # Not yet implemented
|
|
var single_hyd_b_3 = status.new(msg: "-BLUE ELEC PUMP.....AUTO", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var single_hyd_g = status.new(msg: "APPR PROC HYD LO PR", active: 0, colour: "a"), # Not yet implemented
|
|
var single_hyd_g_2 = status.new(msg: " •IF GREEN OVHT OUT:", active: 0, colour: "w"), # Not yet implemented
|
|
var single_hyd_g_3 = status.new(msg: "-GREEN ENG 1 PUMP.....ON", active: 0, colour: "c"), # Not yet implemented
|
|
var single_hyd_g_4 = status.new(msg: "-PTU................AUTO", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var single_hyd_y = status.new(msg: "APPR PROC HYD LO PR", active: 0, colour: "a"), # Not yet implemented
|
|
var single_hyd_y_2 = status.new(msg: " •IF YELLOW OVHT OUT:", active: 0, colour: "w"), # Not yet implemented
|
|
var single_hyd_y_3 = status.new(msg: "-YELLOW ENG 1 PUMP....ON", active: 0, colour: "c"), # Not yet implemented
|
|
var single_hyd_y_4 = status.new(msg: "-PTU................AUTO", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var avionics_smk = status.new(msg: "APPR PROC:", active: 0, colour: "w"), # Not yet implemented
|
|
var avionics_smk_2 = status.new(msg: " •BEFORE L/G EXTENSION :", active: 0, colour: "w"), # Not yet implemented
|
|
var avionics_smk_2 = status.new(msg: "-GEN 2...............ON", active: 0, colour: "c"), # Not yet implemented
|
|
var avionics_smk_4 = status.new(msg: "-EMER ELEC GEN1 LINE ON", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var ths_stuck = status.new(msg: "APPR PROC:", active: 0, colour: "w"), # Not yet implemented
|
|
var ths_stuck_2 = status.new(msg: "-FOR LDG.....USE FLAP 3", active: 0, colour: "c"), # Not yet implemented
|
|
var ths_stuck_3 = status.new(msg: "-GPWS LDG FLAP 3.....ON", active: 0, colour: "c"), # Not yet implemented
|
|
var ths_stuck_4 = status.new(msg: " •IF MAN TRIM NOT AVAIL:", active: 0, colour: "w"), # Not yet implemented
|
|
var ths_stuck_5 = status.new(msg: " •WHEN CONF3 AND VAPP :", active: 0, colour: "w"), # Not yet implemented
|
|
var ths_stuck_6 = status.new(msg: "-L/G.................DN", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var flap_stuck = status.new(msg: "APPR PROC:", active: 0, colour: "w"), # Not yet implemented
|
|
var flap_stuck_2 = status.new(msg: "-FOR LDG.....USE FLAP 3", active: 0, colour: "c"), # Not yet implemented
|
|
var flap_stuck_3 = status.new(msg: "-FLAPS...KEEP CONF FULL", active: 0, colour: "c"), # Not yet implemented
|
|
var flap_stuck_4 = status.new(msg: "-GPWS FLAP MODE.....OFF", active: 0, colour: "c"), # Not yet implemented
|
|
var flap_stuck_5 = status.new(msg: "-GPWS LDG FLAP 3.....ON", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var slat_stuck = status.new(msg: "APPR PROC:", active: 0, colour: "w"), # Not yet implemented
|
|
var slat_stuck_2 = status.new(msg: "-FOR LDG.....USE FLAP 1", active: 0, colour: "c"), # Not yet implemented
|
|
var slat_stuck_3 = status.new(msg: "-FOR LDG.....USE FLAP 3", active: 0, colour: "c"), # Not yet implemented
|
|
var slat_stuck_4 = status.new(msg: "-CTR TK PUMPS.......OFF", active: 0, colour: "c"), # Not yet implemented
|
|
var slat_stuck_5 = status.new(msg: "-GPWS LDG FLAP 3.....ON", active: 0, colour: "c"), # Not yet implemented
|
|
var slat_stuck_6 = status.new(msg: "-GPWS FLAP MODE.....OFF", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var fctl_proc = status.new(msg: "APPR PROC:", active: 0, colour: "w"), # Not yet implemented
|
|
var fctl_proc_2 = status.new(msg: " •IF BUFFET:", active: 0, colour: "w"), # Not yet implemented
|
|
var fctl_proc_3 = status.new(msg: "-FOR LDG.....USE FLAP 3", active: 0, colour: "c"), # Not yet implemented
|
|
var fctl_proc_4 = status.new(msg: "-GPWS LDG FLAP 3.....ON", active: 0, colour: "c"), # Not yet implemented
|
|
var fctl_proc_5 = status.new(msg: "-AT 1000FT AGL:L/G...DN", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var rev_unlc_proc = status.new(msg: "APPR PROC:", active: 0, colour: "w"), # Not yet implemented
|
|
var rev_unlc_proc_2 = status.new(msg: " •IF BUFFET:", active: 0, colour: "w"), # Not yet implemented
|
|
var rev_unlc_proc_3 = status.new(msg: "-FOR LDG.....USE FLAP 3", active: 0, colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_4 = status.new(msg: "-APPR SPD : VREF + 55KT", active: 0, colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_5 = status.new(msg: "-APPR SPD : VREF + 60KT", active: 0, colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_6 = status.new(msg: "-RUD TRIM.......5 DEG R", active: 0, colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_7 = status.new(msg: "-RUD TRIM.......5 DEG L", active: 0, colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_8 = status.new(msg: "-ATHR...............OFF", active: 0, colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_9 = status.new(msg: "-GPWS FLAP MODE.....OFF", active: 0, colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_10 = status.new(msg: " •WHEN LDG ASSURED:", active: 0, colour: "w"), # Not yet implemented
|
|
var rev_unlc_proc_11 = status.new(msg: "-L/G...............DOWN", active: 0, colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_12 = status.new(msg: " •AT 800FT AGL:", active: 0, colour: "w"), # Not yet implemented
|
|
var rev_unlc_proc_13 = status.new(msg: "-TARGET SPD : VREF+40KT", active: 0, colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_14 = status.new(msg: "-TARGET SPD : VREF+45KT", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var thr_lvr_flt = status.new(msg: "APPR PROC THR LEVER", active: 0, colour: "a"), # Not yet implemented
|
|
var thr_lvr_flt_2 = status.new(msg: "-AUTOLAND...........USE", active: 0, colour: "c"), # Not yet implemented
|
|
var thr_lvr_flt_3 = status.new(msg: " •IF AUTOLAND NOT USED:", active: 0, colour: "w"), # Not yet implemented
|
|
var thr_lvr_flt_4 = status.new(msg: " •AT 500FT AGL :", active: 0, colour: "w"), # Not yet implemented
|
|
var thr_lvr_flt_5 = status.new(msg: "-ENG MASTER 1.......OFF", active: 0, colour: "c"), # Not yet implemented
|
|
var thr_lvr_flt_6 = status.new(msg: "-ENG MASTER 2.......OFF", active: 0, colour: "c"), # Not yet implemented
|
|
|
|
var fuel_ctl_flt = status.new(msg: "APPR PROC FUEL CTL FAULT", active: 0, colour: "a"), # Not yet implemented
|
|
var fuel_ctl_flt_2 = status.new(msg: "REV 1........DO NOT USE", active: 0, colour: "w"), # Not yet implemented
|
|
var fuel_ctl_flt_3 = status.new(msg: "REV 2........DO NOT USE", active: 0, colour: "w"), # Not yet implemented
|
|
var fuel_ctl_flt_4 = status.new(msg: " •AFTER TOUCHDOWN:", active: 0, colour: "w"), # Not yet implemented
|
|
var fuel_ctl_flt_5 = status.new(msg: "-ENG MASTER 1.......OFF", active: 0, colour: "c"), # Not yet implemented
|
|
var fuel_ctl_flt_6 = status.new(msg: "-ENG MASTER 2.......OFF", active: 0, colour: "c"), # Not yet implemented
|
|
]);
|
|
|
|
var statusProc = std.Vector.new();
|
|
var statusInfo = std.Vector.new();
|
|
var statusCancelled = std.Vector.new();
|
|
var statusInop = std.Vector.new();
|
|
var statusMaintenance = std.Vector.new(); |