# Electrical system for A320 by Joshua Davidson (it0uchpods/411). var ELEC_UPDATE_PERIOD = 0.5; # A periodic update in secs var STD_VOLTS_AC = 115; # Typical volts for a power source var MIN_VOLTS_AC = 110; # Typical minimum voltage level for generic equipment var STD_VOLTS_DC = 28; # Typical volts for a power source var MIN_VOLTS_DC = 25; # Typical minimum voltage level for generic equipment var STD_AMPS = 0; # Not used yet var NUM_ENGINES = 2; # Set all the stuff I need var elec_init = func { setprop("/controls/switches/annun-test", 0); setprop("/controls/electrical/switches/galley", 0); setprop("/controls/electrical/switches/idg1", 0); setprop("/controls/electrical/switches/idg2", 0); setprop("/controls/electrical/switches/gen1", 0); setprop("/controls/electrical/switches/gen2", 0); setprop("/controls/electrical/switches/gen-apu", 0); setprop("/controls/electrical/switches/gen-ext", 0); setprop("/controls/electrical/switches/apu-ext-crosstie", 1); setprop("/controls/electrical/switches/acc-ess-feed", 1); setprop("/controls/electrical/switches/battery1", 0); setprop("/controls/electrical/switches/battery2", 0); setprop("/systems/electrical/battery1-volts", 25.9); setprop("/systems/electrical/battery2-volts", 25.9); setprop("/systems/electrical/bus/dc1", 0); setprop("/systems/electrical/bus/dc2", 0); setprop("/systems/electrical/bus/ac1", 0); setprop("/systems/electrical/bus/ac2", 0); setprop("/systems/electrical/bus/ac-ess", 0); setprop("systems/electrical/on", 0); setprop("/controls/electrical/xtie/xtieL", 0); setprop("/controls/electrical/xtie/xtieR", 0); # Below are standard FG Electrical stuff to keep things working when the plane is powered setprop("/systems/electrical/outputs/adf", 0); setprop("/systems/electrical/outputs/audio-panel", 0); setprop("/systems/electrical/outputs/audio-panel[1]", 0); setprop("/systems/electrical/outputs/autopilot", 0); setprop("/systems/electrical/outputs/avionics-fan", 0); setprop("/systems/electrical/outputs/beacon", 0); setprop("/systems/electrical/outputs/bus", 0); setprop("/systems/electrical/outputs/cabin-lights", 0); setprop("/systems/electrical/outputs/dme", 0); setprop("/systems/electrical/outputs/efis", 0); setprop("/systems/electrical/outputs/flaps", 0); setprop("/systems/electrical/outputs/fuel-pump", 0); setprop("/systems/electrical/outputs/fuel-pump[1]", 0); setprop("/systems/electrical/outputs/gps", 0); setprop("/systems/electrical/outputs/gps-mfd", 0); setprop("/systems/electrical/outputs/hsi", 0); setprop("/systems/electrical/outputs/instr-ignition-switch", 0); setprop("/systems/electrical/outputs/instrument-lights", 0); setprop("/systems/electrical/outputs/landing-lights", 0); setprop("/systems/electrical/outputs/map-lights", 0); setprop("/systems/electrical/outputs/mk-viii", 0); setprop("/systems/electrical/outputs/nav", 0); setprop("/systems/electrical/outputs/nav[1]", 0); setprop("/systems/electrical/outputs/pitot-head", 0); setprop("/systems/electrical/outputs/stobe-lights", 0); setprop("/systems/electrical/outputs/tacan", 0); setprop("/systems/electrical/outputs/taxi-lights", 0); setprop("/systems/electrical/outputs/transponder", 0); setprop("/systems/electrical/outputs/turn-coordinator", 0); } # Define all the stuff I need for the main elec loop var master_elec = func { var gallery_sw = getprop("/controls/electrical/switches/galley"); var idg1_sw = getprop("/controls/electrical/switches/idg1"); var idg2_sw = getprop("/controls/electrical/switches/idg2"); var gen1_sw = getprop("/controls/electrical/switches/gen1"); var gen2_sw = getprop("/controls/electrical/switches/gen2"); var gen_apu_sw = getprop("/controls/electrical/switches/gen-apu"); var gen_ext_sw = getprop("/controls/electrical/switches/gen-ext"); var apu_ext_crosstie_sw = getprop("/controls/electrical/switches/apu-ext-crosstie"); var acc_ess_feed_sw = getprop("/controls/electrical/switches/acc-ess-feed"); var battery1_sw = getprop("/controls/electrical/switches/battery1"); var battery2_sw = getprop("/controls/electrical/switches/battery2"); var rpmapu = getprop("/systems/apu/rpm"); var extpwr_on = getprop("/controls/switches/cart"); var stateL = getprop("/engines/engine[0]/state"); var stateR = getprop("/engines/engine[1]/state"); var xtieL = getprop("/controls/electrical/xtie/xtieL"); var xtieR = getprop("/controls/electrical/xtie/xtieR"); var ac1 = getprop("/systems/electrical/bus/ac1"); var ac2 = getprop("/systems/electrical/bus/ac2"); var ac_ess = getprop("/systems/electrical/bus/ac-ess"); var dc1 = getprop("/systems/electrical/bus/dc1"); var dc2 = getprop("/systems/electrical/bus/dc2"); # Left cross tie yes? if (extpwr_on and gen_ext_sw) { setprop("/controls/electrical/xtie/xtieR", 1); } else if (rpmapu >= 99 and gen_apu_sw) { setprop("/controls/electrical/xtie/xtieR", 1); } else if (stateL == 3 and gen1_sw) { setprop("/controls/electrical/xtie/xtieR", 1); } else { setprop("/controls/electrical/xtie/xtieR", 0); } # Right cross tie yes? if (extpwr_on and gen_ext_sw) { setprop("/controls/electrical/xtie/xtieL", 1); } else if (rpmapu >= 99 and gen_apu_sw) { setprop("/controls/electrical/xtie/xtieL", 1); } else if (stateR == 3 and gen2_sw) { setprop("/controls/electrical/xtie/xtieL", 1); } else { setprop("/controls/electrical/xtie/xtieL", 0); } # Left AC/DC bus yes? if (extpwr_on and gen_ext_sw) { setprop("/systems/electrical/bus/ac1", 115); setprop("/systems/electrical/bus/ac-ess", 115); setprop("/systems/electrical/bus/dc1", 28); } else if (rpmapu >= 99 and gen_apu_sw) { setprop("/systems/electrical/bus/ac1", 115); setprop("/systems/electrical/bus/ac-ess", 115); setprop("/systems/electrical/bus/dc1", 28); } else if (stateL == 3 and gen1_sw) { setprop("/systems/electrical/bus/ac1", 115); setprop("/systems/electrical/bus/ac-ess", 115); setprop("/systems/electrical/bus/dc1", 28); } else if (apu_ext_crosstie_sw == 1 and xtieL) { setprop("/systems/electrical/bus/ac1", 115); setprop("/systems/electrical/bus/ac-ess", 115); setprop("/systems/electrical/bus/dc1", 28); } else { setprop("/systems/electrical/bus/ac1", 0); if (getprop("/systems/electrical/bus/ac2") == 0) { setprop("/systems/electrical/bus/ac-ess", 0); } setprop("/systems/electrical/bus/dc1", 0); } # Right AC/DC bus yes? if (extpwr_on and gen_ext_sw) { setprop("/systems/electrical/bus/ac2", 115); setprop("/systems/electrical/bus/ac-ess", 115); setprop("/systems/electrical/bus/dc2", 28); } else if (rpmapu >= 99 and gen_apu_sw) { setprop("/systems/electrical/bus/ac2", 115); setprop("/systems/electrical/bus/ac-ess", 115); setprop("/systems/electrical/bus/dc2", 28); } else if (stateR == 3 and gen2_sw) { setprop("/systems/electrical/bus/ac2", 115); setprop("/systems/electrical/bus/ac-ess", 115); setprop("/systems/electrical/bus/dc2", 28); } else if (apu_ext_crosstie_sw == 1 and xtieR) { setprop("/systems/electrical/bus/ac2", 115); setprop("/systems/electrical/bus/ac-ess", 115); setprop("/systems/electrical/bus/dc2", 28); } else { setprop("/systems/electrical/bus/ac2", 0); if (getprop("/systems/electrical/bus/ac1") == 0) { setprop("/systems/electrical/bus/ac-ess", 0); } setprop("/systems/electrical/bus/dc2", 0); } if (ac_ess >= 100) { if (gallery_sw == 1) { setprop("/systems/electrical/bus/galley", 115); } else if (gallery_sw == 0) { setprop("/systems/electrical/bus/galley", 0); } } else { setprop("/systems/electrical/bus/galley", 0); } } setlistener("/systems/electrical/bus/ac-ess", func { if (getprop("/systems/electrical/bus/ac-ess") == 0) { setprop("systems/electrical/on", 0); # ai_spin.setValue(0.2); # aispin.stop(); setprop("systems/electrical/outputs/adf", 0); setprop("systems/electrical/outputs/audio-panel", 0); setprop("systems/electrical/outputs/audio-panel[1]", 0); setprop("systems/electrical/outputs/autopilot", 0); setprop("systems/electrical/outputs/avionics-fan", 0); setprop("systems/electrical/outputs/beacon", 0); setprop("systems/electrical/outputs/bus", 0); setprop("systems/electrical/outputs/cabin-lights", 0); setprop("systems/electrical/outputs/dme", 0); setprop("systems/electrical/outputs/efis", 0); setprop("systems/electrical/outputs/flaps", 0); setprop("systems/electrical/outputs/fuel-pump", 0); setprop("systems/electrical/outputs/fuel-pump[1]", 0); setprop("systems/electrical/outputs/gps", 0); setprop("systems/electrical/outputs/gps-mfd", 0); setprop("systems/electrical/outputs/hsi", 0); setprop("systems/electrical/outputs/instr-ignition-switch", 0); setprop("systems/electrical/outputs/instrument-lights", 0); setprop("systems/electrical/outputs/landing-lights", 0); setprop("systems/electrical/outputs/map-lights", 0); setprop("systems/electrical/outputs/mk-viii", 0); setprop("systems/electrical/outputs/nav", 0); setprop("systems/electrical/outputs/nav[1]", 0); setprop("systems/electrical/outputs/pitot-head", 0); setprop("systems/electrical/outputs/stobe-lights", 0); setprop("systems/electrical/outputs/tacan", 0); setprop("systems/electrical/outputs/taxi-lights", 0); setprop("systems/electrical/outputs/transponder", 0); setprop("systems/electrical/outputs/turn-coordinator", 0); } else { setprop("systems/electrical/on", 1); # aispin.start(); setprop("systems/electrical/outputs/adf", 28); setprop("systems/electrical/outputs/audio-panel", 28); setprop("systems/electrical/outputs/audio-panel[1]", 28); setprop("systems/electrical/outputs/autopilot", 28); setprop("systems/electrical/outputs/avionics-fan", 28); setprop("systems/electrical/outputs/beacon", 28); setprop("systems/electrical/outputs/bus", 28); setprop("systems/electrical/outputs/cabin-lights", 28); setprop("systems/electrical/outputs/dme", 28); setprop("systems/electrical/outputs/efis", 28); setprop("systems/electrical/outputs/flaps", 28); setprop("systems/electrical/outputs/fuel-pump", 28); setprop("systems/electrical/outputs/fuel-pump[1]", 28); setprop("systems/electrical/outputs/gps", 28); setprop("systems/electrical/outputs/gps-mfd", 28); setprop("systems/electrical/outputs/hsi", 28); setprop("systems/electrical/outputs/instr-ignition-switch", 28); setprop("systems/electrical/outputs/instrument-lights", 28); setprop("systems/electrical/outputs/landing-lights", 28); setprop("systems/electrical/outputs/map-lights", 28); setprop("systems/electrical/outputs/mk-viii", 28); setprop("systems/electrical/outputs/nav", 28); setprop("systems/electrical/outputs/nav[1]", 28); setprop("systems/electrical/outputs/pitot-head", 28); setprop("systems/electrical/outputs/stobe-lights", 28); setprop("systems/electrical/outputs/tacan", 28); setprop("systems/electrical/outputs/taxi-lights", 28); setprop("systems/electrical/outputs/transponder", 28); setprop("systems/electrical/outputs/turn-coordinator", 28); } }); var update_electrical = func { master_elec(); settimer(update_electrical, ELEC_UPDATE_PERIOD); } settimer(update_electrical, 2);