# A3XX Electronic Centralised Aircraft Monitoring System # Jonathan Redpath (legoboyvdlp) ############################################## # Copyright (c) Joshua Davidson (it0uchpods) # ############################################## # Colors: # 1 - Red, 2 - Amber, 3 - Cyan 4 - Green 5 - White # Priority: 1 - LEVEL 3 2 - LEVEL 2 3 - LEVEL 1 4 - LEVEL 0 5 - MEMO # LEVEL 3 has priority over all other warnings # LEVEL 2 has priority over 1 and 0 # LEVEL 1 has priority over 0 # LEVEL 3 Messages Priority: # Red visual warning, repetitive chime or sound # 1 Stall # 2 Over speed # 3 Engine dual failure # 4 Engine fire # 5 APU fire # 6 Takeoff configuration # 7 Sidestick fault # 8 Excessive cabin altitude # 9 Engine oil lo pressure # 10 L + R Elevator fault # 11 Landing gear # 12 Autopilot disconnection # 13 Auto land # 14 Smoke # 15 Emergency configuration # 16 Dual hydraulic failure # LEVEL 2 Messages: # Amber warning, single chime # LEVEL 1 Messages: # Amber warning, no chime # LEVEL 0 Messages: # No visual warning or chime: ECAM blue, green, or white message # TYPES: Independent, Primary and Secondary, Status, and MEMO # Operation: FWC receives electrical boolean or numeric signals, from the systems, and outputs a message, audible warning, or visual alert # Electrical Connection: FWC1 is controlled by AC ESS, FWC2 by AC BUS 2 # Sounds: reduce volume by 6DB is engines are off # ARINC 429: 100kb/s (high speed) # PHASE: /FMGC/status/phase # DISPLAY: 1 - EWD 2 - MEMO 3 - STATUS # commented lines of logic are waiting for proper FMGC warning phases var num_lines = 6; var msg = nil; var spacer = nil; var line = nil; var right_line = nil; var wow = getprop("/gear/gear[1]/wow"); setprop("/ECAM/warnings/master-warning-light", 0); setprop("/ECAM/warnings/master-caution-light", 0); var warning = { msg: "", active: 0, colour: "", aural: "", light: "", noRepeat: 0, new: func(msg,active,colour,aural,light,noRepeat) { var t = {parents:[warning]}; t.msg = msg; t.active = active; t.colour = colour; t.aural = aural; t.light = light; t.noRepeat = noRepeat; return t }, write: func() { var line = 1; while (getprop("/ECAM/msg/line" ~ line) != "") { line = line + 1; # go to next line until empty line } # if (getprop("/ECAM/msg/line" ~ line) != me.msg) if (getprop("/ECAM/msg/line" ~ line) == "" and me.active == 1 and me.msg != "") { # at empty line. Also checks if message is not blank to allow for some warnings with no displayed msg, eg stall setprop("/ECAM/msg/line" ~ line, me.msg); setprop("/ECAM/msg/linec" ~ line, me.colour); } }, warnlight: func() { if ((me.light != "none" or me.light != "") and me.noRepeat == 0 and me.active == 1) { # only toggle light once per message, allows canceling setprop("/ECAM/warnings/master-"~me.light~"-light", 1); me.noRepeat = 1; } }, sound: func() { if (me.active and (me.aural != "none" or me.aural != "") and getprop("/sim/sound/warnings/"~me.aural) != 1) { setprop("/sim/sound/warnings/"~me.aural, 1); } else if (!me.active or me.aural == "none") { if (getprop("/sim/sound/warnings/"~me.aural) == 1) { setprop("/sim/sound/warnings/"~me.aural, 0); } } }, }; var memo = { msg: "", active: 0, colour: "", new: func(msg,active,colour) { var t = {parents:[memo]}; t.msg = msg; t.active = active; t.colour = colour; return t }, write: func() { var right_line = 1; while (getprop("/ECAM/rightmsg/line" ~ right_line) != "") { right_line = right_line + 1; # go to next line until empty line } if (getprop("/ECAM/rightmsg/line" ~ right_line) == "" and me.active == 1) { # at empty line setprop("/ECAM/rightmsg/line" ~ right_line, me.msg); setprop("/ECAM/rightmsg/linec" ~ right_line, me.colour); } }, }; # messages logic and added to arrays var warnings = std.Vector.new([ var lg_not_dn = warning.new(msg: "L/G GEAR NOT DOWN", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0), var pack1_fault = warning.new(msg: "AIR PACK 1 FAULT ", active: 0, colour: "a", aural: "chime", light: "caution", noRepeat: 0), var pack1_fault_subwarn_1 = warning.new(msg: "-PACK 1.............OFF ", active: 0, colour: "c", aural: "none", light: "none", noRepeat: 0), var pack2_fault = warning.new(msg: "AIR PACK 2 FAULT ", active: 0, colour: "a", aural: "chime", light: "caution", noRepeat: 0), var pack2_fault_subwarn_1 = warning.new(msg: "-PACK 2.............OFF ", active: 0, colour: "c", aural: "none", light: "none", noRepeat: 0), var park_brk_on = warning.new(msg: "PARK BRK ON", active: 0, colour: "a", aural: "chime", light: "caution", noRepeat: 0) ]); var memos = std.Vector.new([ var to_inhibit = memo.new(msg: "T.O. INHIBIT", active: 0, colour: "m"), var ldg_inhibit = memo.new(msg: "LDG INHIBIT", active: 0, colour: "m"), var spd_brk = memo.new(msg: "SPEED BRK", active: 0, colour: "g"), var fob_3T = memo.new(msg: "FOB BELOW 3T", active: 0, colour: "g"), var emer_gen = memo.new(msg: "EMER GEN", active: 0, colour: "g"), var rat = memo.new(msg: "RAT OUT", active: 0, colour: "g"), var gnd_splrs = memo.new(msg: "GND SPLRS ARMED", active: 0, colour: "g"), var park_brk = memo.new(msg: "PARK BRK", active: 0, colour: "g"), var refuelg = memo.new(msg: "REFUELG", active: 0, colour: "g"), var ram_air = memo.new(msg: "RAM AIR ON", active: 0, colour: "g"), var ptu = memo.new(msg: "HYD PTU", active: 0, colour: "g"), var eng_aice = memo.new(msg: "ENG A.ICE", active: 0, colour: "g"), var wing_aice = memo.new(msg: "WING A.ICE", active: 0, colour: "g"), var fuelx = memo.new(msg: "FUEL X FEED", active: 0, colour: "g") ]); var clearWarnings = std.Vector.new(); var messages_priority_3 = func { if (getprop("/controls/flight/flap-pos") > 2 and getprop("/position/gear-agl-ft") < 750 and getprop("/gear/gear[1]/position-norm") != 1 and getprop("/FMGC/status/phase") == 5) { # if ((getprop("/controls/flight/flap-pos") > 2 and getprop("/position/gear-agl-ft") < 750 and getprop("/gear/gear[1]/position-norm") != 1 and (getprop("/FMGC/status/phase") != 3 and getprop("/FMGC/status/phase") != 4 and getprop("/FMGC/status/phase") != 5)) or ((getprop("/engines/engine[0]/n1-actual") < 75.0 and getprop("/engines/engine[1]/n1-actual") < 75.0) and getprop("/position/gear-agl-ft") < 750 and getprop("/gear/gear[1]/position-norm") != 1 and (getprop("/FMGC/status/phase") != 3 and getprop("/FMGC/status/phase") != 4 and getprop("/FMGC/status/phase") != 5 and getprop("/FMGC/status/phase") != 6)) or (((getprop("/engines/engine[0]/n1-actual") < 77.0 and getprop("/controls/engines/engine[1]/cutoff-switch") == 0) or (getprop("/engines/engine[1]/n1-actual") < 77.0 and getprop("/controls/engines/engine[0]/cutoff-switch") == 0) and getprop("/position/gear-agl-ft") < 750 and getprop("/gear/gear[1]/position-norm") != 1 and (getprop("/FMGC/status/phase") != 3 and getprop("/FMGC/status/phase") != 4 and getprop("/FMGC/status/phase") != 5 and getprop("/FMGC/status/phase") != 6))) { lg_not_dn.active = 1; } else { lg_not_dn.active = 0; lg_not_dn.noRepeat = 0; } } var messages_priority_2 = func { if ((((getprop("/FMGC/status/phase") >= 1 and getprop("/FMGC/status/phase") <= 2) or (getprop("/FMGC/status/phase") >= 9 and getprop("/FMGC/status/phase") <= 10) and (wow and getprop("/engines/engine[0]/state") == 3)) or getprop("/FMGC/status/phase") == 6) and getprop("/systems/failures/pack1") == 1) { pack1_fault.active = 1; } else { pack1_fault.active = 0; } if (pack1_fault.active == 1 and getprop("/controls/pneumatic/switches/pack1") == 1) { pack1_fault_subwarn_1.active = 1; } else { pack1_fault_subwarn_1.active = 0; } if ((((getprop("/FMGC/status/phase") >= 1 and getprop("/FMGC/status/phase") <= 2) or (getprop("/FMGC/status/phase") >= 9 and getprop("/FMGC/status/phase") <= 10) and (wow and getprop("/engines/engine[1]/state") == 3)) or getprop("/FMGC/status/phase") == 6) and getprop("/systems/failures/pack2") == 1) { pack2_fault.active = 1; } else { pack2_fault.active = 0; } if (pack2_fault.active == 1 and getprop("/controls/pneumatic/switches/pack2") == 1) { pack2_fault_subwarn_1.active = 1; } else { pack2_fault_subwarn_1.active = 0; } # if (getprop("/controls/gear/brake-parking") and (getprop("/FMGC/status/phase") >= 6 and getprop("/FMGC/status/phase") <= 7)) { if (getprop("/controls/gear/brake-parking") and (getprop("/FMGC/status/phase") >= 2 and getprop("/FMGC/status/phase") <= 5)) { park_brk_on.active = 1; } else { park_brk_on.active = 0; park_brk_on.noRepeat = 0; } } var messages_priority_1 = func {} var messages_priority_0 = func {} var messages_memo = func {} var messages_right_memo = func { if (getprop("/FMGC/status/phase") >= 3 and getprop("/FMGC/status/phase") <= 5) { to_inhibit.active = 1; } else { to_inhibit.active = 0; } if (getprop("/FMGC/status/phase") >= 7 and getprop("/FMGC/status/phase") <= 7) { ldg_inhibit.active = 1; } else { ldg_inhibit.active = 0; } if (getprop("controls/flight/speedbrake-arm") == 1) { gnd_splrs.active = 1; } else { gnd_splrs.active = 0; } #if (getprop("/controls/gear/brake-parking") == 1 and getprop("/FMGC/status/phase") != 3) { if (getprop("/controls/gear/brake-parking") == 1) { park_brk.active = 1; } else { park_brk.active = 0; } if (getprop("/FMGC/status/phase") >= 4 and getprop("/FMGC/status/phase") <= 8) { park_brk.colour = "a"; } else { park_brk.colour = "g"; } if (getprop("/controls/pneumatic/switches/ram-air") == 1) { ram_air.active = 1; } else { ram_air.active = 0; } if (getprop("/controls/electrical/switches/emer-gen") == 1 and getprop("/controls/hydraulic/rat-deployed") == 1 and !wow) { emer_gen.active = 1; } else { emer_gen.active = 0; } if ((getprop("/FMGC/status/phase") >= 2 and getprop("/FMGC/status/phase") <= 7) and getprop("controls/flight/speedbrake") != 0) { spd_brk.active = 1; } else { spd_brk.active = 0; } if (getprop("/systems/thrust/state1") == "IDLE" and getprop("/systems/thrust/state2") == "IDLE" and getprop("/FMGC/status/phase") >= 6 and getprop("/FMGC/status/phase") <= 7) { spd_brk.colour = "g"; } else if ((getprop("/FMGC/status/phase") >= 2 and getprop("/FMGC/status/phase") <= 5) or ((getprop("/systems/thrust/state1") != "IDLE" or getprop("/systems/thrust/state2") != "IDLE") and (getprop("/FMGC/status/phase") >= 6 and getprop("/FMGC/status/phase") <= 7))) { spd_brk.colour = "a"; } if (getprop("services/fuel-truck/enable") == 1 and getprop("/ECAM/left-msg") != "TO-MEMO" and getprop("/ECAM/left-msg") != "LDG-MEMO") { refuelg.active = 1; } else { refuelg.active = 0; } if (getprop("/consumables/fuel/total-fuel-lbs") < 6000 and getprop("/ECAM/left-msg") != "TO-MEMO" and getprop("/ECAM/left-msg") != "LDG-MEMO") { # assuming US short ton 2000lb fob_3T.active = 1; } else { fob_3T.active = 0; } if (getprop("/systems/fuel/x-feed") == 1 and getprop("controls/fuel/x-feed") == 1) { fuelx.active = 1; } else { fuelx.active = 0; } if (getprop("/FMGC/status/phase") >= 3 and getprop("/FMGC/status/phase") <= 5) { fuelx.colour = "a"; } else { fuelx.colour = "g"; } if (getprop("/controls/hydraulic/ptu") == 1 and ((getprop("/systems/hydraulic/yellow-psi") < 1450 and getprop("/systems/hydraulic/green-psi") > 1450 and getprop("/controls/hydraulic/elec-pump-yellow") == 0) or (getprop("/systems/hydraulic/yellow-psi") > 1450 and getprop("/systems/hydraulic/green-psi") < 1450))) { ptu.active = 1; } else { ptu.active = 0; } if (getprop("/controls/hydraulic/rat-deployed") == 1) { rat.active = 1; } else { rat.active = 0; } if (getprop("/FMGC/status/phase") >= 1 and getprop("/FMGC/status/phase") <= 2) { rat.colour = "a"; } else { rat.colour = "g"; } if (getprop("/controls/switches/leng") == 1 or getprop("/controls/switches/reng") == 1 or getprop("/systems/electrical/bus/dc1") == 0 or getprop("/systems/electrical/bus/dc2") == 0) { eng_aice.active = 1; } else { eng_aice.active = 0; } if (getprop("/controls/switches/wing") == 1) { eng_aice.active = 1; } else { eng_aice.active = 0; } } # Finally the controller var ECAM_controller = { loop: func() { # check active messages # config_warnings(); messages_priority_3(); messages_priority_2(); messages_priority_1(); messages_priority_0(); messages_memo(); messages_right_memo(); # clear display momentarily if (warnings.size() > 0) { for(var n=1; n<8; n+=1) { setprop("/ECAM/msg/line" ~ n, ""); } } if (memos.size() > 0) { for(var n=1; n<8; n+=1) { setprop("/ECAM/rightmsg/line" ~ n, ""); } } # write to ECAM foreach (var i; warnings.vector) { i.write(); i.warnlight(); i.sound(); } foreach (var m; memos.vector) { m.write(); } }, };