fix APU spinup time and add generator lines. Varios improvements

Models/Instruments/ECAM/page-elec.xml

@@ -712,7 +712,6 @@
 				</or>
 			</condition>
 		</layer>
-		
 		<layer>
 			<type>text</type>
 			<name>TR1-volts</name>
@@ -830,6 +829,56 @@
 			</transformations>
 			<!-- TRs simply show 0V and 0A, no conditions -->
 		</layer>
+		<layer>
+			<name>gen1off</name>
+			<emissive>true</emissive>
+			<w>2</w>
+			<h>10</h>
+			<texture>
+				<path>Aircraft/A320Family/Models/Instruments/ECAM/res/elec-gen-green-line.png</path>
+			</texture>
+			<transformations>
+				<transformation>
+					<type>y-shift</type>
+					<offset>-16</offset>
+				</transformation>
+				<transformation>
+					<type>x-shift</type>
+					<offset>-100</offset>
+				</transformation>
+			</transformations>
+			<condition>
+				<equals>
+					<property>/controls/electrical/switches/gen1</property>
+					<value>1</value>
+				</equals>
+			</condition>
+		</layer>
+		<layer>
+			<name>gen2off</name>
+			<emissive>true</emissive>
+			<w>2</w>
+			<h>10</h>
+			<texture>
+				<path>Aircraft/A320Family/Models/Instruments/ECAM/res/elec-gen-green-line.png</path>
+			</texture>
+			<transformations>
+				<transformation>
+					<type>y-shift</type>
+					<offset>-16</offset>
+				</transformation>
+				<transformation>
+					<type>x-shift</type>
+					<offset>101</offset>
+				</transformation>
+			</transformations>
+			<condition>
+				<equals>
+					<property>/controls/electrical/switches/gen2</property>
+					<value>1</value>
+				</equals>
+			</condition>
+		</layer>
 <!-- ################################## Bottom  #################################-->
 
 		<layer>

Nasal/electrical.nas

@@ -111,6 +111,7 @@ var master_elec = func {
 	var dc_ess = getprop("/systems/electrical/bus/dc-ess");
 	var gen_1_volts = getprop("/systems/electrical/extra/gen1-volts");
 	var gen_2_volts = getprop("/systems/electrical/extra/gen1-volts");
+	var galley_shed = getprop("/systems/electrical/extra/galleyshed");
 	
 	
 	
@@ -235,15 +236,22 @@ var master_elec = func {
 	}
 	
 	if (ac_ess >= 100) {
-		if (galley_sw == 1) { 
+		if (galley_sw == 1 and !galley_shed) { 
 			setprop("/systems/electrical/bus/galley", ac_volt_std);
-		} else if (galley_sw) {
+		} else if (galley_sw or galley_shed) {
 			setprop("/systems/electrical/bus/galley", 0);
 		}
 	} else {
 		setprop("/systems/electrical/bus/galley", 0);
 	}
 	
+	# Galley Shedding Logic
+	if (!gen_apu_sw and !gen_ext_sw and (!gen1_sw or !gen2_sw)) { # this is when one of the generators is not working or turned off as it reads 0 V
+		setprop("/systems/electrical/extra/galleyshed", 1); 
+	} else {
+		setprop("/systems/electrical/extra/galleyshed", 0); 
+	}
+	
 	# Battery Amps
 		if (battery1_sw) {
 			setprop("/systems/electrical/battery1-amps", dc_amps_std);

Nasal/engines.nas

@@ -21,7 +21,8 @@ var n1_wm = 0;
 var n2_wm = 0;
 var apu_max = 99.8;
 var apu_egt_max = 513;
-var spinup_time = 15;
+var spinup_time = 49; # Measured from youtube video
+# For future, APU FLAP also takes 15 extra seconds to open before startup
 var start_time = 10;
 var egt_lightup_time = 2;
 var egt_lightdn_time = 8;
@@ -157,6 +158,7 @@ setlistener("/controls/APU/start", func {
 	}
 });
 
+
 ############
 # Stop APU #
 ############