fly/IDG-A32X
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

interpolate nlg and wheel ECAM

Browse source
This commit is contained in:
Jonathan Redpath 2016-12-09 22:15:47 +00:00
parent 934064042f
commit 4eaccab27e
5 changed files with 114 additions and 6 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

70
Models/Instruments/ECAM/page-wheel.xml
View file

@ -23,6 +23,76 @@
<emissive>true</emissive>
</layer>
<layer>
<name>greentriangle1</name>
<w>50</w>
<h>25</h>
<texture>
<path>Aircraft/A320Family/Models/Instruments/ECAM/res/wheel-green-triangle.png</path>
<x1>0.0</x1>
<y1>0.0</y1>
<x2>1</x2>
<y2>1</y2>
</texture>
<emissive>true</emissive>
<transformations>
<transformation>
<type>y-shift</type>
<offset>80</offset>
</transformation>
<transformation>
<type>x-shift</type>
<offset>0</offset>
</transformation>
</transformations>
<condition>
<and>
<equals>
<property>gear/gear[1]/position-norm</property>
<value>1</value>
</equals>
<equals>
<property>controls/lgciu[1]/nlg/isdownlock</property>
<value>1</value>
</equals>
</and>
</condition>
</layer>
<layer>
<name>redtriangle1</name>
<w>50</w>
<h>25</h>
<texture>
<path>Aircraft/A320Family/Models/Instruments/ECAM/res/wheel-red-triangle.png</path>
<x1>0.0</x1>
<y1>0.0</y1>
<x2>1</x2>
<y2>1</y2>
</texture>
<emissive>true</emissive>
<transformations>
<transformation>
<type>y-shift</type>
<offset>80</offset>
</transformation>
<transformation>
<type>x-shift</type>
<offset>0</offset>
</transformation>
</transformations>
<condition>
<and>
<less-than>
<property>/controls/lgciu[0]/nlgpos</property>
<value>0.99</value>
</less-than>
<greater-than>
<property>/controls/lgciu[0]/nlgpos</property>
<value>0.01</value>
</and>
</condition>
</layer>
<!-- ################################## Bottom #################################-->
<layer>

BIN
Models/Instruments/ECAM/res/page-wheel.png
View file

Binary file not shown.
Side by side Swipe Overlay

Before

Width:  |  Height:  |  Size: 23 KiB

After

Width:  |  Height:  |  Size: 22 KiB

BIN
Models/Instruments/ECAM/res/wheel-green-triangle.png Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 1.9 KiB

BIN
Models/Instruments/ECAM/res/wheel-red-triangle.png Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 1.9 KiB

50
Nasal/LGCIU.nas
View file

@ -21,7 +21,9 @@ var lgciu_one_init = func {
print("L/G SYS: Uplock / Downlock System Enabled");
setprop("/controls/lgciu[0]/hyd/greensupply",0); #0 = no, 1 = yes presently no supply as green pump is off
print("L/G SYS: Hydraulics Initialized");
setprop("/controls/lgciu[0]/isonground",1); #0 = no, 1 = yes
setprop("/controls/lgciu[0]/wow/isongroundl",1); #0 = no, 1 = yes
setprop("/controls/lgciu[0]/wow/isongroundn",1); #0 = no, 1 = yes
setprop("/controls/lgciu[0]/wow/isongroundr",1); #0 = no, 1 = yes
setprop("/controls/lgciu[0]/nws/nwsenabled",0); #0 = disabled 1 = enabled, must be disabled for push
setprop("/controls/lgciu[0]/inuse",1); #the LGCIUs switch between eachother on each gear cycle. eg if one LGCIU fails put the gear down and bring them up again to reset
setprop("/controls/lgciu[0]/hasbeenret",0); #has the gear been retracted with LGCIU1?
@ -48,7 +50,9 @@ var lgciu_two_init = func {
print("L/G SYS: Uplock / Downlock System Enabled");
setprop("/controls/lgciu[1]/hyd/greensupply",0); #0 = no, 1 = yes presently no supply as green pump is off
print("L/G SYS: Hydraulics Initialized");
setprop("/controls/lgciu[1]/isonground",1); #0 = no, 1 = yes
setprop("/controls/lgciu[1]/wow/isongroundl",1); #0 = no, 1 = yes
setprop("/controls/lgciu[1]/wow/isongroundn",1); #0 = no, 1 = yes
setprop("/controls/lgciu[1]/wow/isongroundr",1); #0 = no, 1 = yes
setprop("/controls/lgciu[1]/nws/nwsenabled",0); #0 = disabled 1 = enabled, must be disabled for push
setprop("/controls/lgciu[1]/inuse",0); #the LGCIUs switch between eachother on each gear cycle. eg if one LGCIU fails put the gear down and bring them up again to reset
setprop("/controls/lgciu[1]/hasbeenret",0); #has the gear been retracted with LGCIU2?
@ -68,11 +72,35 @@ setlistener("/sim/signals/fdm-initialized", func {
setlistener("/gear/gear[0]/wow", func {
var wowmlgl = getprop("/gear/gear[0]/wow");
if (wowmlgl == 0) {
setprop("/controls/lgciu[0]/isonground",0);
setprop("/controls/lgciu[1]/isonground",0);
setprop("/controls/lgciu[0]/wow/isongroundl",0);
setprop("/controls/lgciu[1]/wow/isongroundl",0);
} else if (wowmlgl == 1) {
setprop("/controls/lgciu[0]/isonground",1);
setprop("/controls/lgciu[1]/isonground",1);
setprop("/controls/lgciu[0]/wow/isongroundl",1);
setprop("/controls/lgciu[1]/wow/isongroundl",1);
}
});
### Nose MLG compressor sensor to check if we are on the ground ###
setlistener("/gear/gear[1]/wow", func {
var wowmlgn = getprop("/gear/gear[1]/wow");
if (wowmlgn == 0) {
setprop("/controls/lgciu[0]/wow/isongroundn",0);
setprop("/controls/lgciu[1]/wow/isongroundn",0);
} else if (wowmlgn == 1) {
setprop("/controls/lgciu[0]/wow/isongroundn",1);
setprop("/controls/lgciu[1]/wow/isongroundn",1);
}
});
### Right MLG compressor sensor to check if we are on the ground ###
setlistener("/gear/gear[2]/wow", func {
var wowmlgr = getprop("/gear/gear[2]/wow");
if (wowmlgr == 0) {
setprop("/controls/lgciu[0]/wow/isongroundr",0);
setprop("/controls/lgciu[1]/wow/isongroundr",0);
} else if (wowmlgr == 1) {
setprop("/controls/lgciu[0]/wow/isongroundr",1);
setprop("/controls/lgciu[1]/wow/isongroundr",1);
}
});
@ -83,28 +111,38 @@ var mlgl = getprop("/controls/lgciu[0]/mlgleftpos");
var mlgr = getprop("/controls/lgciu[0]/mlgrightpos");
var mlgl2 = getprop("/controls/lgciu[1]/mlgleftpos");
var mlgr2 = getprop("/controls/lgciu[1]/mlgrightpos");
var nlg = getprop("/controls/lgciu[0]/nlgpos");
var nlg2 = getprop("/controls/lgciu[1]/nlgpos");
var inuseno1 = getprop("/controls/lgciu[0]/inuse");
var inuseno2 = getprop("/controls/lgciu[1]/inuse");
if ((gr == 1) and (inuseno1 == 1)) {
interpolate("/controls/lgciu[0]/mlgleftpos", 1, 10);
interpolate("/controls/lgciu[0]/mlgrightpos", 1, 10);
interpolate("/controls/lgciu[0]/nlgpos", 1, 10);
setprop("/controls/lgciu[1]/mlgleftpos",1);
setprop("/controls/lgciu[1]/mlgrightpos",1);
setprop("/controls/lgciu[1]/nlgpos",1);
} else if ((gr == 1) and (inuseno2 == 1)) {
interpolate("/controls/lgciu[1]/mlgleftpos", 1, 10);
interpolate("/controls/lgciu[1]/mlgrightpos", 1, 10);
interpolate("/controls/lgciu[1]/nlgpos", 1, 10);
setprop("/controls/lgciu[0]/mlgleftpos",1);
setprop("/controls/lgciu[0]/mlgrightpos",1);
setprop("/controls/lgciu[0]/nlgpos",1);
} else if ((gr == 0) and (inuseno1 == 1)) {
interpolate("/controls/lgciu[0]/mlgleftpos", 0, 10);
interpolate("/controls/lgciu[0]/mlgrightpos", 0, 10);
interpolate("/controls/lgciu[0]/nlgpos", 0, 10);
setprop("/controls/lgciu[1]/mlgleftpos",0);
setprop("/controls/lgciu[1]/mlgrightpos",0);
setprop("/controls/lgciu[1]/nlgpos",0);
} else if ((gr == 0) and (inuseno2 == 1)) {
interpolate("/controls/lgciu[1]/mlgleftpos", 0, 10);
interpolate("/controls/lgciu[1]/mlgrightpos", 0, 10);
interpolate("/controls/lgciu[1]/nlgpos", 0, 10);
setprop("/controls/lgciu[0]/mlgleftpos",0);
setprop("/controls/lgciu[0]/mlgrightpos",0);
setprop("/controls/lgciu[0]/nlgpos",0);
}
});