IDG-A32X/Nasal/ECAM-controller.nas

# A3XX Electronic Centralised Aircraft Monitoring System
# Jonathan Redpath (legoboyvdlp)

##############################################
# Copyright (c) Joshua Davidson (it0uchpods) #
##############################################

# Colors:
# 1 - Red, 2 - Amber, 3 - Cyan 4 - Green 5 - White

# Priority: 1 - LEVEL 3    2 - LEVEL 2    3 - LEVEL 1     4 - LEVEL 0     5 - MEMO
# LEVEL 3 has priority over all other warnings
# LEVEL 2 has priority over 1 and 0
# LEVEL 1 has priority over 0

# LEVEL 3 Messages Priority:
# Red visual warning, repetitive chime or sound
# 1 Stall
# 2 Over speed
# 3 Engine dual failure
# 4 Engine fire
# 5 APU fire
# 6 Takeoff configuration
# 7 Sidestick fault
# 8 Excessive cabin altitude
# 9 Engine oil lo pressure
# 10 L + R Elevator fault
# 11 Landing gear
# 12 Autopilot disconnection
# 13 Auto land
# 14 Smoke
# 15 Emergency configuration
# 16 Dual hydraulic failure

# LEVEL 2 Messages:
# Amber warning, single chime

# LEVEL 1 Messages:
# Amber warning, no chime

# LEVEL 0 Messages: 
# No visual warning or chime: ECAM blue, green, or white message

# TYPES: Independent, Primary and Secondary, Status, and MEMO

# Operation: FWC receives electrical boolean or numeric signals, from the systems, and outputs a message, audible warning, or visual alert

# Electrical Connection: FWC1 is controlled by AC ESS, FWC2 by AC BUS 2

# Sounds: reduce volume by 6DB is engines are off

# ARINC 429: 100kb/s (high speed)

# PHASE: /FMGC/status/phase

# DISPLAY: 1 - EWD 2 - MEMO 3 - STATUS
var ewd = props.globals.initNode("/instrumentation/ewd");
var ewd_msg_three	= ewd.initNode("msg/priority_3"," ","STRING");
var ewd_msg_two		= ewd.initNode("msg/priority_2"," ","STRING");
var ewd_msg_one		= ewd.initNode("msg/priority_1"," ","STRING");
var ewd_msg_zero	= ewd.initNode("msg/priority_0"," ","STRING");
var ewd_msg_memo	= ewd.initNode("msg/memo"," ","STRING");
var msgs_priority_3 = std.Vector.new();
var msgs_priority_2 = std.Vector.new();
var msgs_priority_1 = std.Vector.new();
var msgs_priority_0 = std.Vector.new();
var msgs_memo = std.Vector.new();
var active_messages = std.Vector.new();
var num_lines = 6;
var msg = nil;
var spacer = nil;
var line = nil;

# messages logic and added to arrays

var messages_priority_3 = func {
	if (getprop("/controls/flight/flap-pos") > 2 and getprop("/position/gear-agl-ft") < 750 and getprop("/gear/gear[1]/position-norm") != 1 and getprop("/FMGC/status/phase") == 5) {
		msgs_priority_3.append("L/G GEAR NOT DOWN");
		active_messages.append("L/G GEAR NOT DOWN");
	}
}
var messages_priority_2 = func {}
var messages_priority_1 = func {}
var messages_priority_0 = func {}
var messages_memo = func {
	if (getprop("controls/flight/speedbrake-arm") == 1) {
		msgs_memo.append("GND SPLRS ARMED");
		active_messages.append("GND SPLRS ARMED");
	}
}


# Finally the controller

var ECAM_controller = {
	loop: func() {
		# cleans up arrays
		msgs_priority_3.clear();
		msgs_priority_2.clear();
		msgs_priority_1.clear();
		msgs_priority_0.clear();
		msgs_memo.clear();
		active_messages.clear();
		
		# check active messages
		# config_warnings();
		messages_priority_3();
		messages_priority_2();
		messages_priority_1();
		messages_priority_0();
		messages_memo();
		
		# write to ECAM
		foreach(var ewd_messages; active_messages.vector) { 
			var i = 1;
			var x = getprop("/ECAM/msg/line" ~ i);
			print("Variable i is:" ~ i);
			if (x == "") {
				setprop("/ECAM/msg/line" ~ i, ewd_messages);
			} else {
				i = i + 1;
				setprop("/ECAM/msg/line" ~ i, ewd_messages);
				print("Variable i is:" ~ i);
			}
		}
		
		# debug
		
		foreach(var debug; active_messages.vector) { 
			print(debug);
		}
		
	},
};