IDG-A32X/Systems/fmgc-roll-yaw.xml

<?xml version="1.0"?>

<!--
##############################################
# Copyright (c) Joshua Davidson (it0uchpods) #
##############################################
-->

<!-- IT-AUTOFLIGHT -->

<PropertyList>

 <!-- =============================================================== -->
 <!-- Lateral  Modes                                                  -->
 <!-- =============================================================== -->

	<pi-simple-controller>
		<name>ROLL CONTROLLER: HDG/LNAV</name>
		<debug>false</debug>
		<enable>
			<condition>
				<and>
					<or>
						<equals>
							<property>/it-autoflight/output/lat</property>
							<value>0</value>
						</equals>
						<equals>
							<property>/it-autoflight/output/lat</property>
							<value>1</value>
						</equals>
					</or>
					<or>
						<equals>
							<property>/it-autoflight/output/ap1</property>
							<value>1</value>
						</equals>
						<equals>
							<property>/it-autoflight/output/ap2</property>
							<value>1</value>
						</equals>
						<equals>
							<property>/it-autoflight/output/fd1</property>
							<value>1</value>
						</equals>
						<equals>
							<property>/it-autoflight/output/fd2</property>
							<value>1</value>
						</equals>
					</or>
				</and>
			</condition>
		</enable>
		<input>
			<property>/it-autoflight/internal/heading-error-deg</property>
		</input>
		<reference>
			<value>0</value>
		</reference>
		<output>
			<property>/it-autoflight/internal/target-roll-deg</property>
		</output>
		<config>
			<Kp>-1.3</Kp>
			<Ki>-0.000001</Ki>
			<min>
				<property>/it-autoflight/internal/bank-limit</property>
				<scale>-1</scale>
			</min>
			<max>
				<property>/it-autoflight/internal/bank-limit</property>
			</max>
		</config>
	</pi-simple-controller>
	
	<pi-simple-controller>
		<name>VORLOC TRK</name>
		<debug>false</debug>
		<enable>
			<condition>
				<and>
					<equals>
						<property>/it-autoflight/output/lat</property>
						<value>2</value>
					</equals>
					<or>
						<equals>
							<property>/it-autoflight/output/ap1</property>
							<value>1</value>
						</equals>
						<equals>
							<property>/it-autoflight/output/ap2</property>
							<value>1</value>
						</equals>
						<equals>
							<property>/it-autoflight/output/fd1</property>
							<value>1</value>
						</equals>
						<equals>
							<property>/it-autoflight/output/fd2</property>
							<value>1</value>
						</equals>
					</or>
				</and>
			</condition>
		</enable>
		<input>
			<condition>
				<equals>
					<property>/it-autoflight/settings/use-backcourse</property>
					<value>0</value>
				</equals>
			</condition>
			<property>/it-autoflight/internal/nav-heading-error-deg</property>
		</input>
		<input>
			<condition>
				<equals>
					<property>/it-autoflight/settings/use-backcourse</property>
					<value>1</value>
				</equals>
			</condition>
			<property>/it-autoflight/internal/nav-bc-heading-error-deg</property>
		</input>
		<reference>
			<value>0.0</value>
		</reference>
		<output>
			<property>/it-autoflight/internal/target-roll-deg</property>
		</output>
		<config>
			<Kp>-2.8</Kp>
			<Ki>-0.0001</Ki>
			<min>
				<property>/it-autoflight/internal/bank-limit</property>
				<scale>-1</scale>
			</min>
			<max>
				<property>/it-autoflight/internal/bank-limit</property>
			</max>
		</config>
	</pi-simple-controller>

	<filter>
		<name>ROLL DEG SYNC</name>
		<debug>false</debug>
		<type>gain</type>
		<gain>1.0</gain>
		<enable>
			<condition>
				<and>
					<not-equals>
						<property>/it-autoflight/output/ap1</property>
						<value>1</value>
					</not-equals>
					<not-equals>
						<property>/it-autoflight/output/ap2</property>
						<value>1</value>
					</not-equals>
					<not-equals>
						<property>/it-autoflight/output/fd1</property>
						<value>1</value>
					</not-equals>
					<not-equals>
						<property>/it-autoflight/output/fd2</property>
						<value>1</value>
					</not-equals>
				</and>
			</condition>
		</enable>
		<input>/orientation/roll-deg</input>
		<output>/it-autoflight/internal/target-roll-deg</output>
		<min>
			<property>/it-autoflight/internal/bank-limit</property>
			<scale>-1</scale>
		</min>
		<max>
			<property>/it-autoflight/internal/bank-limit</property>
		</max>
	</filter>
	
	<filter>
		<name>IT-CONTROLLER: TARGET ROLL CMD</name>
		<debug>false</debug>
		<feedback-if-disabled>true</feedback-if-disabled>
		<initialize-to>output</initialize-to>
		<input>
			<property>/it-autoflight/internal/target-roll-deg</property>
		</input>
		<output>/it-autoflight/internal/target-roll</output>
		<type>noise-spike</type>
		<max-rate-of-change>6</max-rate-of-change>
	</filter>
	
	<filter>
		<name>System Command: Roll Rate</name>
		<debug>false</debug>
		<type>gain</type>
		<gain>-0.1</gain>
		<enable>
			<condition>
				<or>
					<equals>
						<property>/it-autoflight/output/ap1</property>
						<value>1</value>
					</equals>
					<equals>
						<property>/it-autoflight/output/ap2</property>
						<value>1</value>
					</equals>
				</or>
			</condition>
		</enable>
		<input>
			<property>/orientation/roll-deg</property>
		</input>
		<reference>
			<condition>
				<and>
					<not-equals>
						<property>/it-autoflight/output/lat</property>
						<value>4</value>
					</not-equals>
					<not-equals>
						<property>/it-autoflight/output/lat</property>
						<value>5</value>
					</not-equals>
				</and>
			</condition>
			<property>/it-autoflight/internal/target-roll</property>
		</reference>
		<reference>
			<condition>
				<or>
					<equals>
						<property>/it-autoflight/output/lat</property>
						<value>4</value>
					</equals>
					<equals>
						<property>/it-autoflight/output/lat</property>
						<value>5</value>
					</equals>
				</or>
			</condition>
			<value>0</value>
		</reference>
		<output>
			<property>/it-autoflight/internal/aileron-cmd</property> <!-- Inputs to the FBW Roll Rate -->
		</output>   	
		<min>-0.4</min>
		<max>0.4</max>
	</filter>
	
 <!-- =============================================================== -->
 <!-- Yaw Control                                                     -->
 <!-- =============================================================== -->
	
	<pi-simple-controller>
		<name>RUDDER VORLOC TRK</name>
		<debug>false</debug>
		<enable>
			<condition>
				<equals>
					<property>/it-autoflight/output/lat</property>
					<value>4</value>
				</equals>
			</condition>
		</enable>
		<input>
			<property>/it-autoflight/internal/nav-heading-error-deg</property>
		</input>
		<reference>
			<value>0</value>
		</reference>
		<output>/it-autoflight/internal/rudder-cmd</output>
		<config>
			<Kp>
				<condition>
					<and>
						<equals>
							<property>/gear/gear[1]/wow</property>
							<value>0</value>
						</equals>
						<equals>
							<property>/gear/gear[2]/wow</property>
							<value>0</value>
						</equals>
					</and>
				</condition>
				<value>-0.05</value>
			</Kp>
			<Kp>
				<condition>
					<or>
						<equals>
							<property>/gear/gear[1]/wow</property>
							<value>1</value>
						</equals>
						<equals>
							<property>/gear/gear[2]/wow</property>
							<value>1</value>
						</equals>
					</or>
				</condition>
				<value>-0.02</value>
			</Kp>
			<Ki>0</Ki>
		</config>
		<min>-0.15</min>
		<max>0.15</max>
	</pi-simple-controller>
	
	<filter>
		<name>IT-CONTROLLER: RUDDER CMD</name>
		<debug>false</debug>
		<feedback-if-disabled>true</feedback-if-disabled>
		<initialize-to>output</initialize-to>
		<enable>
			<condition>
				<or>
					<equals>
						<property>/it-autoflight/output/ap1</property>
						<value>1</value>
					</equals>
					<equals>
						<property>/it-autoflight/output/ap2</property>
						<value>1</value>
					</equals>
				</or>
			</condition>
		</enable>
		<input>
			<condition>
				<not-equals>
					<property>/it-autoflight/output/lat</property>
					<value>4</value>
				</not-equals>
			</condition>
			<value>0</value>
		</input>
		<input>
			<condition>
				<equals>
					<property>/it-autoflight/output/lat</property>
					<value>4</value>
				</equals>
			</condition>
			<property>/it-autoflight/internal/rudder-cmd</property>
		</input>
		<output>/controls/flight/rudder</output>
		<type>noise-spike</type>
		<max-rate-of-change>0.6</max-rate-of-change>
	</filter>

</PropertyList>