2018-11-16 18:02:13 +00:00
# A3XX Electronic Centralised Aircraft Monitoring System
2019-01-12 17:04:55 +00:00
# Copyright (c) 2019 Jonathan Redpath (legoboyvdlp)
2018-11-16 18:02:13 +00:00
2019-02-19 18:14:58 +00:00
# props.nas:
2019-03-08 02:02:05 +00:00
var dualFailNode = props.globals.initNode("/ECAM/dual-failure-enabled", 0, "BOOL");
2019-02-19 18:14:58 +00:00
var phaseNode = props.globals.getNode("/ECAM/warning-phase", 1);
2019-02-20 14:28:54 +00:00
var leftMsgNode = props.globals.getNode("/ECAM/left-msg", 1);
var apWarn = props.globals.getNode("/it-autoflight/output/ap-warning", 1);
var athrWarn = props.globals.getNode("/it-autoflight/output/athr-warning", 1);
var emerGen = props.globals.getNode("/controls/electrical/switches/emer-gen", 1);
2019-03-11 17:54:01 +00:00
var fac1Node = props.globals.getNode("/controls/fctl/fac1", 1);
var state1Node = props.globals.getNode("/engines/engine[0]/state", 1);
var state2Node = props.globals.getNode("/engines/engine[1]/state", 1);
var wowNode = props.globals.getNode("/fdm/jsbsim/position/wow", 1);
2019-04-08 15:19:28 +00:00
var apu_rpm = props.globals.getNode("/systems/apu/rpm", 1);
var wing_pb = props.globals.getNode("/controls/switches/wing", 1);
var apumaster = props.globals.getNode("/controls/APU/master", 1);
var apu_bleedSw = props.globals.getNode("/controls/pneumatic/switches/bleedapu", 1);
var gear = props.globals.getNode("/gear/gear-pos-norm", 1);
var cutoff1 = props.globals.getNode("/controls/engines/engine[0]/cutoff-switch", 1);
var cutoff2 = props.globals.getNode("/controls/engines/engine[1]/cutoff-switch", 1);
var engOpt = props.globals.getNode("/options/eng", 1);
2019-02-19 18:14:58 +00:00
# local variables
var phaseVar = nil;
2019-02-20 14:28:54 +00:00
var dualFailFACActive = 1;
2019-02-19 18:14:58 +00:00
2018-11-16 18:02:13 +00:00
var messages_priority_3 = func {
2019-02-19 18:14:58 +00:00
phaseVar = phaseNode.getValue();
2019-02-20 14:28:54 +00:00
2019-02-08 19:57:48 +00:00
# FCTL
2019-02-19 18:14:58 +00:00
if ((flap_not_zero.clearFlag == 0) and phaseVar == 6 and getprop("/controls/flight/flap-lever") != 0 and getprop("/instrumentation/altimeter/indicated-altitude-ft") > 22000) {
2019-02-08 19:57:48 +00:00
flap_not_zero.active = 1;
2018-11-16 18:02:13 +00:00
} else {
2019-03-16 16:39:29 +00:00
ECAM_controller.warningReset(flap_not_zero);
2018-11-16 18:02:13 +00:00
}
2019-02-08 19:57:48 +00:00
2019-02-19 18:14:58 +00:00
# ENG DUAL FAIL
if (phaseVar >= 5 and phaseVar <= 7 and dualFailNode.getBoolValue()) {
dualFail.active = 1;
2019-04-15 18:58:54 +00:00
} elsif (dualFailbatt.clearFlag == 1 or !dualFailNode.getBoolValue()) {
2019-03-16 16:39:29 +00:00
ECAM_controller.warningReset(dualFail);
2019-02-20 14:28:54 +00:00
2019-02-20 16:35:33 +00:00
dualFailFACActive = 1; # reset FAC local variable
2019-02-19 18:14:58 +00:00
}
if (dualFail.active == 1) {
if (getprop("/controls/engines/engine-start-switch") != 2 and dualFailModeSel.clearFlag == 0) {
dualFailModeSel.active = 1;
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailModeSel);
2019-02-19 18:14:58 +00:00
}
if (getprop("/fdm/jsbsim/fcs/throttle-lever[0]") > 0.01 and getprop("/fdm/jsbsim/fcs/throttle-lever[1]") > 0.01 and dualFailLevers.clearFlag == 0) {
dualFailLevers.active = 1;
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailLevers);
2019-02-19 18:14:58 +00:00
}
2019-04-08 15:19:28 +00:00
if (engOpt.getValue() == "IAE" and dualFailRelightSPD.clearFlag == 0) {
2019-02-19 18:14:58 +00:00
dualFailRelightSPD.active = 1;
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailRelightSPD);
2019-02-19 18:14:58 +00:00
}
2019-04-08 15:19:28 +00:00
if (engOpt.getValue() != "IAE" and dualFailRelightSPDCFM.clearFlag == 0) {
2019-02-19 18:14:58 +00:00
dualFailRelightSPDCFM.active = 1;
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailRelightSPDCFM);
2019-02-19 18:14:58 +00:00
}
2019-02-20 14:28:54 +00:00
if (emerGen.getValue() == 0 and dualFailElec.clearFlag == 0) {
dualFailElec.active = 1;
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailElec);
2019-02-20 14:28:54 +00:00
}
if (dualFailRadio.clearFlag == 0) {
dualFailRadio.active = 1;
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailRadio);
2019-02-20 14:28:54 +00:00
}
if (dualFailFACActive == 1 and dualFailFAC.clearFlag == 0) {
dualFailFAC.active = 1;
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailFAC);
2019-02-20 14:28:54 +00:00
}
2019-04-08 15:19:28 +00:00
if (dualFailMasters.clearFlag == 0) {
dualFailRelight.active = 1; # assumption
2019-02-20 14:28:54 +00:00
dualFailMasters.active = 1;
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailRelight);
ECAM_controller.warningReset(dualFailMasters);
}
if (dualFailSPDGD.clearFlag == 0) {
dualFailSuccess.active = 1; # assumption
dualFailSPDGD.active = 1;
} else {
ECAM_controller.warningReset(dualFailSuccess);
ECAM_controller.warningReset(dualFailSPDGD);
}
if (dualFailAPU.clearFlag == 0) {
2019-02-20 14:28:54 +00:00
dualFailAPU.active = 1;
2019-04-08 15:19:28 +00:00
} else {
ECAM_controller.warningReset(dualFailAPU);
2019-02-20 14:28:54 +00:00
}
2019-04-08 15:19:28 +00:00
if (dualFailAPUwing.clearFlag == 0 and apu_rpm.getValue() > 94.9 and wing_pb.getBoolValue()) {
dualFailAPUwing.active = 1;
2019-02-20 14:28:54 +00:00
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailAPUwing);
2019-02-20 14:28:54 +00:00
}
2019-04-08 15:19:28 +00:00
if (dualFailAPUbleed.clearFlag == 0 and apu_rpm.getValue() > 94.9 and !apu_bleedSw.getBoolValue()) {
dualFailAPUbleed.active = 1;
} else {
ECAM_controller.warningReset(dualFailAPUbleed);
}
if (dualFailMastersAPU.clearFlag == 0) {
dualFailMastersAPU.active = 1;
2019-02-20 14:28:54 +00:00
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailMastersAPU);
2019-02-20 14:28:54 +00:00
}
if (dualFailflap.clearFlag == 0) {
2019-04-08 15:19:28 +00:00
dualFailAPPR.active = 1; # assumption
dualFailflap.active = 1;
2019-02-20 14:28:54 +00:00
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailAPPR);
ECAM_controller.warningReset(dualFailflap);
2019-02-20 14:28:54 +00:00
}
if (dualFailcabin.clearFlag == 0) {
dualFailcabin.active = 1;
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailcabin);
2019-02-20 14:28:54 +00:00
}
if (dualFailrudd.clearFlag == 0) {
dualFailrudd.active = 1;
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailrudd);
2019-02-20 14:28:54 +00:00
}
2019-04-08 15:19:28 +00:00
if (dualFailgear.clearFlag == 0 and gear.getValue() != 1) {
dualFail5000.active = 1; # according to doc
dualFailgear.active = 1;
2019-02-20 14:28:54 +00:00
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailgear);
ECAM_controller.warningReset(dualFail5000);
2019-02-20 14:28:54 +00:00
}
if (dualFailfinalspeed.clearFlag == 0) {
2019-04-08 15:19:28 +00:00
dualFailfinalspeed.active = 1;
2019-02-20 14:28:54 +00:00
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailfinalspeed);
2019-02-20 14:28:54 +00:00
}
2019-04-08 15:19:28 +00:00
if (dualFailmasteroff.clearFlag == 0 and (!cutoff1.getBoolValue() or !cutoff2.getBoolValue())) {
dualFailmasteroff.active = 1;
2019-02-20 14:28:54 +00:00
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailmasteroff);
2019-02-20 14:28:54 +00:00
}
2019-04-08 15:19:28 +00:00
if (dualFailapuoff.clearFlag == 0 and apumaster.getBoolValue()) {
dualFailapuoff.active = 1;
} else {
ECAM_controller.warningReset(dualFailapuoff);
}
if (dualFailevac.clearFlag == 0) {
dualFailevac.active = 1;
2019-02-20 14:28:54 +00:00
} else {
2019-04-08 15:19:28 +00:00
ECAM_controller.warningReset(dualFailevac);
2019-02-20 14:28:54 +00:00
}
2019-04-08 15:19:28 +00:00
if (dualFailbatt.clearFlag == 0) { # elec power lost when batt goes off anyway I guess
dualFailbatt.active = 1;
dualFailtouch.active = 1;
} else {
ECAM_controller.warningReset(dualFailbatt);
ECAM_controller.warningReset(dualFailtouch);
}
2019-04-15 18:58:54 +00:00
} else {
ECAM_controller.warningReset(dualFailModeSel);
ECAM_controller.warningReset(dualFailLevers);
ECAM_controller.warningReset(dualFailRelightSPD);
ECAM_controller.warningReset(dualFailRelightSPDCFM);
ECAM_controller.warningReset(dualFailElec);
ECAM_controller.warningReset(dualFailRadio);
ECAM_controller.warningReset(dualFailFAC);
ECAM_controller.warningReset(dualFailRelight);
ECAM_controller.warningReset(dualFailMasters);
ECAM_controller.warningReset(dualFailSuccess);
ECAM_controller.warningReset(dualFailSPDGD);
ECAM_controller.warningReset(dualFailAPU);
ECAM_controller.warningReset(dualFailAPUwing);
ECAM_controller.warningReset(dualFailAPUbleed);
ECAM_controller.warningReset(dualFailMastersAPU);
ECAM_controller.warningReset(dualFailAPPR);
ECAM_controller.warningReset(dualFailflap);
ECAM_controller.warningReset(dualFailcabin);
ECAM_controller.warningReset(dualFailrudd);
ECAM_controller.warningReset(dualFailgear);
ECAM_controller.warningReset(dualFail5000);
ECAM_controller.warningReset(dualFailfinalspeed);
ECAM_controller.warningReset(dualFailmasteroff);
ECAM_controller.warningReset(dualFailapuoff);
ECAM_controller.warningReset(dualFailevac);
ECAM_controller.warningReset(dualFailbatt);
ECAM_controller.warningReset(dualFailtouch);
}
# ENG FIRE
if (eng1FireFlAgent2.clearFlag == 0 and getprop("/systems/fire/engine1/warning-active") == 1 and phaseVar >= 5 and phaseVar <= 7) {
eng1FireFl.active = 1;
} else {
ECAM_controller.warningReset(eng1FireFl);
}
if (eng1FireGnevacBat.clearFlag == 0 and getprop("/systems/fire/engine1/warning-active") == 1 and (phaseVar < 5 or phaseVar > 7)) {
eng1FireGn.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGn);
}
if (eng2FireFlAgent2.clearFlag == 0 and getprop("/systems/fire/engine2/warning-active") == 1 and phaseVar >= 5 and phaseVar <= 7) {
eng2FireFl.active = 1;
} else {
ECAM_controller.warningReset(eng2FireFl);
}
if (eng2FireGnevacBat.clearFlag == 0 and getprop("/systems/fire/engine2/warning-active") == 1 and (phaseVar < 5 or phaseVar > 7)) {
eng2FireGn.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGn);
}
2019-04-19 16:40:20 +00:00
if (apuFireMaster.clearFlag == 0 and getprop("/systems/fire/apu/warning-active") == 1) {
apuFire.active = 1;
} else {
ECAM_controller.warningReset(apuFire);
}
2019-04-15 18:58:54 +00:00
if (eng1FireFl.active == 1) {
eng1FireFllever.active = 1;
eng1FireFlmaster.active = 1;
eng1FireFlPB.active = 1;
eng1FireFlAgent1.active = 1;
eng1FireFlATC.active = 1;
eng1FireFl30Sec.active = 1;
eng1FireFlAgent2.active = 1;
} else {
ECAM_controller.warningReset(eng1FireFllever);
ECAM_controller.warningReset(eng1FireFlmaster);
ECAM_controller.warningReset(eng1FireFlPB);
ECAM_controller.warningReset(eng1FireFlAgent1);
ECAM_controller.warningReset(eng1FireFlATC);
ECAM_controller.warningReset(eng1FireFl30Sec);
ECAM_controller.warningReset(eng1FireFlAgent2);
}
2019-04-19 16:40:20 +00:00
if (eng1FireGn.active == 1) {
eng1FireGnlever.active = 1;
eng1FireGnstopped.active = 1;
eng1FireGnparkbrk.active = 1;
eng1FireGnmaster.active = 1;
eng1FireGnPB.active = 1;
eng1FireGnAgent1.active = 1;
eng1FireGnAgent2.active = 1;
eng1FireGnmaster2.active = 1;
eng1FireGnATC.active = 1;
eng1FireGncrew.active = 1;
eng1FireGnevac.active = 1;
eng1FireGnevacSw.active = 1;
eng1FireGnevacApu.active = 1;
eng1FireGnevacBat.active = 1;
} else {
ECAM_controller.warningReset(eng1FireGnlever);
ECAM_controller.warningReset(eng1FireGnstopped);
ECAM_controller.warningReset(eng1FireGnparkbrk);
ECAM_controller.warningReset(eng1FireGnmaster);
ECAM_controller.warningReset(eng1FireGnPB);
ECAM_controller.warningReset(eng1FireGnAgent1);
ECAM_controller.warningReset(eng1FireGnAgent2);
ECAM_controller.warningReset(eng1FireGnmaster2);
ECAM_controller.warningReset(eng1FireGnATC);
ECAM_controller.warningReset(eng1FireGncrew);
ECAM_controller.warningReset(eng1FireGnevac);
ECAM_controller.warningReset(eng1FireGnevacSw);
ECAM_controller.warningReset(eng1FireGnevacApu);
ECAM_controller.warningReset(eng1FireGnevacBat);
}
2019-04-15 18:58:54 +00:00
if (eng2FireFl.active == 1) {
eng2FireFllever.active = 1;
eng2FireFlmaster.active = 1;
eng2FireFlPB.active = 1;
eng2FireFlAgent1.active = 1;
eng2FireFlATC.active = 1;
eng2FireFl30Sec.active = 1;
eng2FireFlAgent2.active = 1;
} else {
ECAM_controller.warningReset(eng2FireFllever);
ECAM_controller.warningReset(eng2FireFlmaster);
ECAM_controller.warningReset(eng2FireFlPB);
ECAM_controller.warningReset(eng2FireFlAgent1);
ECAM_controller.warningReset(eng2FireFlATC);
ECAM_controller.warningReset(eng2FireFl30Sec);
ECAM_controller.warningReset(eng2FireFlAgent2);
2019-02-19 18:14:58 +00:00
}
2019-04-19 16:40:20 +00:00
if (eng2FireGn.active == 1) {
eng2FireGnlever.active = 1;
eng2FireGnstopped.active = 1;
eng2FireGnparkbrk.active = 1;
eng2FireGnmaster.active = 1;
eng2FireGnPB.active = 1;
eng2FireGnAgent1.active = 1;
eng2FireGnAgent2.active = 1;
eng2FireGnmaster2.active = 1;
eng2FireGnATC.active = 1;
eng2FireGncrew.active = 1;
eng2FireGnevac.active = 1;
eng2FireGnevacSw.active = 1;
eng2FireGnevacApu.active = 1;
eng2FireGnevacBat.active = 1;
} else {
ECAM_controller.warningReset(eng2FireGnlever);
ECAM_controller.warningReset(eng2FireGnstopped);
ECAM_controller.warningReset(eng2FireGnparkbrk);
ECAM_controller.warningReset(eng2FireGnmaster);
ECAM_controller.warningReset(eng2FireGnPB);
ECAM_controller.warningReset(eng2FireGnAgent1);
ECAM_controller.warningReset(eng2FireGnAgent2);
ECAM_controller.warningReset(eng2FireGnmaster2);
ECAM_controller.warningReset(eng2FireGnATC);
ECAM_controller.warningReset(eng2FireGncrew);
ECAM_controller.warningReset(eng2FireGnevac);
ECAM_controller.warningReset(eng2FireGnevacSw);
ECAM_controller.warningReset(eng2FireGnevacApu);
ECAM_controller.warningReset(eng2FireGnevacBat);
}
# APU Fire
if (apuFire.active == 1) {
if (apuFirePB.clearFlag == 0 and !getprop("/controls/APU/fire-btn")) {
apuFirePB.active = 1;
} else {
ECAM_controller.warningReset(apuFirePB);
}
if (apuFireAgent.clearFlag == 0 and !getprop("/systems/fire/apu/disch")) {
apuFireAgent.active = 1;
} else {
ECAM_controller.warningReset(apuFireAgent);
}
if (apuFireMaster.clearFlag == 0 and getprop("/controls/APU/master")) {
apuFireMaster.active = 1;
} else {
ECAM_controller.warningReset(apuFireMaster);
}
} else {
ECAM_controller.warningReset(apuFirePB);
ECAM_controller.warningReset(apuFireAgent);
ECAM_controller.warningReset(apuFireMaster);
}
2019-02-11 12:21:53 +00:00
# CONFIG
2019-02-19 18:14:58 +00:00
if ((slats_config.clearFlag == 0) and (getprop("/controls/flight/flap-lever") == 0 or getprop("/controls/flight/flap-lever")) == 4 and phaseVar >= 3 and phaseVar <= 4) {
2019-02-11 12:21:53 +00:00
slats_config.active = 1;
slats_config_1.active = 1;
} else {
2019-03-16 16:39:29 +00:00
ECAM_controller.warningReset(slats_config);
ECAM_controller.warningReset(slats_config_1);
2019-02-11 12:21:53 +00:00
}
2019-02-19 18:14:58 +00:00
if ((flaps_config.clearFlag == 0) and (getprop("/controls/flight/flap-lever") == 0 or getprop("/controls/flight/flap-lever") == 4) and phaseVar >= 3 and phaseVar <= 4) {
2019-02-11 12:21:53 +00:00
flaps_config.active = 1;
flaps_config_1.active = 1;
} else {
2019-03-16 16:39:29 +00:00
ECAM_controller.warningReset(flaps_config);
ECAM_controller.warningReset(flaps_config_1);
2019-02-11 12:21:53 +00:00
}
2019-02-19 18:14:58 +00:00
if ((spd_brk_config.clearFlag == 0) and getprop("/controls/flight/speedbrake") != 0 and phaseVar >= 3 and phaseVar <= 4) {
2019-02-11 12:21:53 +00:00
spd_brk_config.active = 1;
spd_brk_config_1.active = 1;
} else {
2019-03-16 16:39:29 +00:00
ECAM_controller.warningReset(spd_brk_config);
ECAM_controller.warningReset(spd_brk_config_1);
2019-02-11 12:21:53 +00:00
}
2019-02-19 18:14:58 +00:00
if ((pitch_trim_config.clearFlag == 0) and (getprop("/fdm/jsbsim/hydraulics/elevator-trim/final-deg") > 1.75 or getprop("/fdm/jsbsim/hydraulics/elevator-trim/final-deg") < -3.65) and phaseVar >= 3 and phaseVar <= 4) {
2019-02-11 12:21:53 +00:00
pitch_trim_config.active = 1;
pitch_trim_config_1.active = 1;
} else {
2019-03-16 16:39:29 +00:00
ECAM_controller.warningReset(pitch_trim_config);
ECAM_controller.warningReset(pitch_trim_config_1);
2019-02-11 12:21:53 +00:00
}
2019-02-19 18:14:58 +00:00
if ((rud_trim_config.clearFlag == 0) and (getprop("/fdm/jsbsim/hydraulics/rudder/trim-cmd-deg") < -3.55 or getprop("/fdm/jsbsim/hydraulics/rudder/trim-cmd-deg") > 3.55) and phaseVar >= 3 and phaseVar <= 4) {
2019-02-11 12:21:53 +00:00
rud_trim_config.active = 1;
rud_trim_config_1.active = 1;
} else {
2019-03-16 16:39:29 +00:00
ECAM_controller.warningReset(rud_trim_config);
ECAM_controller.warningReset(rud_trim_config_1);
2019-02-11 12:21:53 +00:00
}
2019-02-19 18:14:58 +00:00
if ((park_brk_config.clearFlag == 0) and getprop("/controls/gear/brake-parking") == 1 and phaseVar >= 3 and phaseVar <= 4) {
2019-02-11 12:21:53 +00:00
park_brk_config.active = 1;
} else {
2019-03-16 16:39:29 +00:00
ECAM_controller.warningReset(park_brk_config);
2019-02-11 12:21:53 +00:00
}
2019-02-08 19:57:48 +00:00
# AUTOFLT
2019-02-20 14:28:54 +00:00
if ((ap_offw.clearFlag == 0) and apWarn.getValue() == 2) {
2018-12-05 16:10:33 +00:00
ap_offw.active = 1;
} else {
2019-03-16 16:39:29 +00:00
ECAM_controller.warningReset(ap_offw);
if (getprop("/it-autoflight/output/ap-warning") == 2) {
setprop("/it-autoflight/output/ap-warning", 0);
setprop("/ECAM/Lower/light/clr", 0);
setprop("/ECAM/warnings/master-warning-light", 0);
}
2018-12-05 16:10:33 +00:00
}
2019-03-16 10:43:52 +00:00
if ((athr_lock.clearFlag == 0) and phaseVar >= 5 and phaseVar <= 7 and getprop("/systems/thrust/thr-locked-alert") == 1) {
2019-03-16 16:39:29 +00:00
if (getprop("/systems/thrust/thr-locked-flash") == 0) {
athr_lock.msg = " ";
} else {
athr_lock.msg = msgSave
}
2018-12-05 15:27:42 +00:00
athr_lock.active = 1;
athr_lock_1.active = 1;
} else {
2019-03-16 16:39:29 +00:00
ECAM_controller.warningReset(athr_lock);
ECAM_controller.warningReset(athr_lock_1);
2018-12-05 15:27:42 +00:00
}
2019-02-20 14:28:54 +00:00
if ((athr_offw.clearFlag == 0) and athrWarn.getValue() == 2 and phaseVar != 4 and phaseVar != 8 and phaseVar != 10) {
2018-12-05 15:27:42 +00:00
athr_offw.active = 1;
athr_offw_1.active = 1;
} else {
2019-03-16 16:39:29 +00:00
ECAM_controller.warningReset(athr_offw);
ECAM_controller.warningReset(athr_offw_1);
if (getprop("/it-autoflight/output/athr-warning") == 2) {
setprop("/it-autoflight/output/athr-warning", 0);
setprop("/ECAM/Lower/light/clr", 0);
setprop("/ECAM/warnings/master-caution-light", 0);
}
2018-12-05 15:27:42 +00:00
}
2018-12-06 12:41:46 +00:00
2019-02-19 18:14:58 +00:00
if ((athr_lim.clearFlag == 0) and getprop("/it-autoflight/output/athr") == 1 and ((getprop("/systems/thrust/eng-out") != 1 and (getprop("/systems/thrust/state1") == "MAN" or getprop("/systems/thrust/state2") == "MAN")) or (getprop("/systems/thrust/eng-out") == 1 and (getprop("/systems/thrust/state1") == "MAN" or getprop("/systems/thrust/state2") == "MAN" or (getprop("/systems/thrust/state1") == "MAN THR" and getprop("/controls/engines/engine[0]/throttle-pos") <= 0.83) or (getprop("/systems/thrust/state2") == "MAN THR" and getprop("/controls/engines/engine[0]/throttle-pos") <= 0.83)))) and (phaseVar >= 5 and phaseVar <= 7)) {
2018-12-06 12:41:46 +00:00
athr_lim.active = 1;
athr_lim_1.active = 1;
} else {
2019-03-16 16:39:29 +00:00
ECAM_controller.warningReset(athr_lim);
ECAM_controller.warningReset(athr_lim_1);
2018-12-06 12:41:46 +00:00
}
2018-12-05 15:27:42 +00:00
}
2019-02-08 19:57:48 +00:00
var messages_priority_2 = func {}
2018-11-16 18:02:13 +00:00
var messages_priority_1 = func {}
var messages_priority_0 = func {}
var messages_memo = func {
2019-02-19 18:14:58 +00:00
phaseVar = phaseNode.getValue();
2019-02-20 14:28:54 +00:00
if (getprop("/services/fuel-truck/enable") == 1 and leftMsgNode.getValue() != "TO-MEMO" and leftMsgNode.getValue() != "LDG-MEMO") {
2018-11-16 18:02:13 +00:00
refuelg.active = 1;
} else {
refuelg.active = 0;
}
2018-11-17 14:18:11 +00:00
if (getprop("/controls/flight/speedbrake-arm") == 1) {
2018-11-16 18:02:13 +00:00
gnd_splrs.active = 1;
} else {
gnd_splrs.active = 0;
}
2019-02-20 14:28:54 +00:00
if (getprop("/controls/lighting/seatbelt-sign") == 1 and leftMsgNode.getValue() != "TO-MEMO" and leftMsgNode.getValue() != "LDG-MEMO") {
2018-11-16 18:02:13 +00:00
seatbelts.active = 1;
} else {
seatbelts.active = 0;
}
2019-02-20 14:28:54 +00:00
if (getprop("/controls/lighting/no-smoking-sign") == 1 and leftMsgNode.getValue() != "TO-MEMO" and leftMsgNode.getValue() != "LDG-MEMO") { # should go off after takeoff assuming switch is in auto due to old logic from the days when smoking was allowed!
2018-11-16 18:02:13 +00:00
nosmoke.active = 1;
} else {
nosmoke.active = 0;
}
2019-02-20 14:28:54 +00:00
if (getprop("/controls/lighting/strobe") == 0 and getprop("/gear/gear[1]/wow") == 0 and leftMsgNode.getValue() != "TO-MEMO" and leftMsgNode.getValue() != "LDG-MEMO") { # todo: use gear branch properties
2018-11-16 18:02:13 +00:00
strobe_lt_off.active = 1;
} else {
strobe_lt_off.active = 0;
}
2019-02-20 14:28:54 +00:00
if (getprop("/consumables/fuel/total-fuel-lbs") < 6000 and leftMsgNode.getValue() != "TO-MEMO" and leftMsgNode.getValue() != "LDG-MEMO") { # assuming US short ton 2000lb
2018-11-16 18:02:13 +00:00
fob_3T.active = 1;
} else {
fob_3T.active = 0;
}
if (getprop("instrumentation/mk-viii/inputs/discretes/momentary-flap-all-override") == 1) {
gpws_flap_mode_off.active = 1;
} else {
gpws_flap_mode_off.active = 0;
}
}
var messages_right_memo = func {
2019-02-19 18:14:58 +00:00
phaseVar = phaseNode.getValue();
if (phaseVar >= 3 and phaseVar <= 5) {
2018-11-16 18:02:13 +00:00
to_inhibit.active = 1;
} else {
to_inhibit.active = 0;
}
2019-02-19 18:14:58 +00:00
if (phaseVar >= 7 and phaseVar <= 7) {
2018-11-16 18:02:13 +00:00
ldg_inhibit.active = 1;
} else {
ldg_inhibit.active = 0;
2018-11-16 19:45:27 +00:00
}
2019-04-19 16:40:20 +00:00
if ((getprop("/gear/gear[1]/wow") == 0) and (getprop("/systems/fire/engine1/warning-active") == 1 or getprop("/systems/fire/engine2/warning-active") == 1 or getprop("/systems/fire/apu/warning-active") == 1 or getprop("/systems/failures/cargo-aft-fire") == 1 or getprop("/systems/failures/cargo-fwd-fire") == 1) or (((getprop("/systems/hydraulic/green-psi") < 1500 and getprop("/engines/engine[0]/state") == 3) and (getprop("/systems/hydraulic/yellow-psi") < 1500 and getprop("/engines/engine[1]/state") == 3)) or ((getprop("/systems/hydraulic/green-psi") < 1500 or getprop("/systems/hydraulic/yellow-psi") < 1500) and getprop("/engines/engine[0]/state") == 3 and getprop("/engines/engine[1]/state") == 3) and phaseVar >= 3 and phaseVar <= 8)) {
2018-11-16 19:45:27 +00:00
# todo: emer elec
land_asap_r.active = 1;
} else {
land_asap_r.active = 0;
}
2019-02-19 18:14:58 +00:00
if (land_asap_r.active == 0 and getprop("/gear/gear[1]/wow") == 0 and ((getprop("/fdm/jsbsim/propulsion/tank[0]/contents-lbs") < 1650 and getprop("/fdm/jsbsim/propulsion/tank[1]/contents-lbs") < 1650) or ((getprop("/systems/electrical/bus/dc2") < 25 and (getprop("/systems/failures/elac1") == 1 or getprop("/systems/failures/sec1") == 1)) or (getprop("/systems/hydraulic/green-psi") < 1500 and (getprop("/systems/failures/elac1") == 1 and getprop("/systems/failures/sec1") == 1)) or (getprop("/systems/hydraulic/yellow-psi") < 1500 and (getprop("/systems/failures/elac1") == 1 and getprop("/systems/failures/sec1") == 1)) or (getprop("/systems/hydraulic/blue-psi") < 1500 and (getprop("/systems/failures/elac2") == 1 and getprop("/systems/failures/sec2") == 1))) or (phaseVar >= 3 and phaseVar <= 8 and (getprop("/engines/engine[0]/state") != 3 or getprop("/engines/engine[1]/state") != 3)))) {
2018-11-16 19:45:27 +00:00
land_asap_a.active = 1;
} else {
land_asap_a.active = 0;
2018-11-16 18:02:13 +00:00
}
2019-02-20 14:28:54 +00:00
if (libraries.ap_active == 1 and apWarn.getValue() == 1) {
2018-11-19 15:13:52 +00:00
ap_off.active = 1;
} else {
ap_off.active = 0;
}
2019-02-20 14:28:54 +00:00
if (libraries.athr_active == 1 and athrWarn.getValue() == 1) {
2018-11-19 15:13:52 +00:00
athr_off.active = 1;
} else {
athr_off.active = 0;
}
2018-11-19 16:55:15 +00:00
2019-02-19 18:14:58 +00:00
if ((phaseVar >= 2 and phaseVar <= 7) and getprop("controls/flight/speedbrake") != 0) {
2018-11-16 18:02:13 +00:00
spd_brk.active = 1;
} else {
spd_brk.active = 0;
}
2019-02-19 18:14:58 +00:00
if (getprop("/systems/thrust/state1") == "IDLE" and getprop("/systems/thrust/state2") == "IDLE" and phaseVar >= 6 and phaseVar <= 7) {
2018-11-16 18:02:13 +00:00
spd_brk.colour = "g";
2019-02-19 18:14:58 +00:00
} else if ((phaseVar >= 2 and phaseVar <= 5) or ((getprop("/systems/thrust/state1") != "IDLE" or getprop("/systems/thrust/state2") != "IDLE") and (phaseVar >= 6 and phaseVar <= 7))) {
2018-11-16 18:02:13 +00:00
spd_brk.colour = "a";
}
2019-02-19 18:14:58 +00:00
if (getprop("/controls/gear/brake-parking") == 1 and phaseVar != 3) {
2018-11-16 18:02:13 +00:00
park_brk.active = 1;
} else {
park_brk.active = 0;
}
2019-02-19 18:14:58 +00:00
if (phaseVar >= 4 and phaseVar <= 8) {
2018-11-16 18:02:13 +00:00
park_brk.colour = "a";
} else {
park_brk.colour = "g";
}
if (getprop("/controls/hydraulic/ptu") == 1 and ((getprop("/systems/hydraulic/yellow-psi") < 1450 and getprop("/systems/hydraulic/green-psi") > 1450 and getprop("/controls/hydraulic/elec-pump-yellow") == 0) or (getprop("/systems/hydraulic/yellow-psi") > 1450 and getprop("/systems/hydraulic/green-psi") < 1450))) {
ptu.active = 1;
} else {
ptu.active = 0;
}
if (getprop("/controls/hydraulic/rat-deployed") == 1) {
rat.active = 1;
} else {
rat.active = 0;
}
2019-02-19 18:14:58 +00:00
if (phaseVar >= 1 and phaseVar <= 2) {
2018-11-16 18:02:13 +00:00
rat.colour = "a";
} else {
rat.colour = "g";
}
2019-03-24 03:41:54 +00:00
if (getprop("/sim/model/autopush/enabled") == 1) { # this message is only on when towing - not when disc with switch
2018-11-19 16:55:15 +00:00
nw_strg_disc.active = 1;
} else {
nw_strg_disc.active = 0;
}
if (getprop("/engines/engine[0]/state") == 3 or getprop("/engines/engine[1]/state") == 3) {
nw_strg_disc.colour = "a";
} else {
nw_strg_disc.colour = "g";
}
2019-02-15 21:26:42 +00:00
if (getprop("/controls/electrical/switches/emer-gen") == 1 and getprop("/controls/hydraulic/rat-deployed") == 1 and getprop("/gear/gear[1]/wow") == 0) {
2018-11-16 18:02:13 +00:00
emer_gen.active = 1;
} else {
emer_gen.active = 0;
}
if (getprop("/controls/pneumatic/switches/ram-air") == 1) {
ram_air.active = 1;
} else {
ram_air.active = 0;
}
if (getprop("/controls/engines/engine[0]/igniter-a") == 1 or getprop("/controls/engines/engine[0]/igniter-b") == 1 or getprop("/controls/engines/engine[1]/igniter-a") == 1 or getprop("/controls/engines/engine[1]/igniter-b") == 1) {
ignition.active = 1;
} else {
ignition.active = 0;
}
2018-11-19 16:55:15 +00:00
if (getprop("/controls/pneumatic/switches/bleedapu") == 1 and getprop("/systems/apu/rpm") >= 95) {
apu_bleed.active = 1;
} else {
apu_bleed.active = 0;
}
2018-11-16 18:02:13 +00:00
if (apu_bleed.active == 0 and getprop("/systems/apu/rpm") >= 95) {
apu_avail.active = 1;
} else {
apu_avail.active = 0;
}
if (getprop("/controls/lighting/landing-lights[1]") > 0 or getprop("/controls/lighting/landing-lights[2]") > 0) {
ldg_lt.active = 1;
} else {
ldg_lt.active = 0;
}
if (getprop("/controls/switches/leng") == 1 or getprop("/controls/switches/reng") == 1 or getprop("/systems/electrical/bus/dc1") == 0 or getprop("/systems/electrical/bus/dc2") == 0) {
eng_aice.active = 1;
} else {
eng_aice.active = 0;
}
if (getprop("/controls/switches/wing") == 1) {
wing_aice.active = 1;
} else {
wing_aice.active = 0;
}
2018-11-19 16:55:15 +00:00
2019-02-19 18:14:58 +00:00
if (getprop("/instrumentation/comm[2]/frequencies/selected-mhz") != 0 and (phaseVar == 1 or phaseVar == 2 or phaseVar == 6 or phaseVar == 9 or phaseVar == 10)) {
2018-11-16 18:02:13 +00:00
vhf3_voice.active = 1;
} else {
vhf3_voice.active = 0;
}
2019-02-19 18:14:58 +00:00
if (getprop("/controls/autobrake/mode") == 1 and (phaseVar == 7 or phaseVar == 8)) {
2018-11-16 18:02:13 +00:00
auto_brk_lo.active = 1;
} else {
auto_brk_lo.active = 0;
}
2019-02-19 18:14:58 +00:00
if (getprop("/controls/autobrake/mode") == 2 and (phaseVar == 7 or phaseVar == 8)) {
2018-11-16 18:02:13 +00:00
auto_brk_med.active = 1;
} else {
auto_brk_med.active = 0;
}
2019-02-19 18:14:58 +00:00
if (getprop("/controls/autobrake/mode") == 3 and (phaseVar == 7 or phaseVar == 8)) {
2018-11-16 18:02:13 +00:00
auto_brk_max.active = 1;
} else {
auto_brk_max.active = 0;
}
if (getprop("/systems/fuel/x-feed") == 1 and getprop("controls/fuel/x-feed") == 1) {
fuelx.active = 1;
} else {
fuelx.active = 0;
}
2019-02-19 18:14:58 +00:00
if (phaseVar >= 3 and phaseVar <= 5) {
2018-11-16 18:02:13 +00:00
fuelx.colour = "a";
} else {
fuelx.colour = "g";
}
2018-11-19 16:55:15 +00:00
if (getprop("/instrumentation/mk-viii/inputs/discretes/momentary-flap-3-override") == 1) { # todo: emer elec
gpws_flap3.active = 1;
} else {
gpws_flap3.active = 0;
}
2019-02-19 18:14:58 +00:00
if (phaseVar >= 2 and phaseVar <= 9 and getprop("/systems/fuel/only-use-ctr-tank") == 1 and getprop("/systems/electrical/bus/ac1") >= 115 and getprop("/systems/electrical/bus/ac2") >= 115) {
2018-11-19 16:55:15 +00:00
ctr_tk_feedg.active = 1;
} else {
ctr_tk_feedg.active = 0;
}
2019-02-20 14:28:54 +00:00
}
2019-03-11 17:54:01 +00:00
# Listeners
2019-02-20 14:28:54 +00:00
setlistener("/controls/fctl/fac1", func() {
if (dualFail.active == 0) { return; }
if (fac1Node.getBoolValue()) {
dualFailFACActive = 0;
} else {
dualFailFACActive = 1;
}
2019-03-11 17:54:01 +00:00
}, 0, 0);
setlistener("/engines/engine[0]/state", func() {
if ((state1Node.getValue() != 3 and state2Node.getValue() != 3) and wowNode.getValue() == 0) {
dualFailNode.setBoolValue(1);
} else {
dualFailNode.setBoolValue(0);
}
}, 0, 0);
setlistener("/engines/engine[1]/state", func() {
if ((state1Node.getValue() != 3 and state2Node.getValue() != 3) and wowNode.getValue() == 0) {
dualFailNode.setBoolValue(1);
} else {
dualFailNode.setBoolValue(0);
}
2019-02-20 14:28:54 +00:00
}, 0, 0);