2017-07-02 14:45:39 +00:00
# A3XX Buttons
# Joshua Davidson (it0uchpods)
2019-01-01 06:03:06 +00:00
# Copyright (c) 2019 Joshua Davidson (it0uchpods)
2017-07-13 17:30:33 +00:00
2017-07-02 14:45:39 +00:00
# Resets buttons to the default values
var variousReset = func {
setprop("/modes/cpt-du-xfr", 0);
setprop("/modes/fo-du-xfr", 0);
setprop("/controls/fadec/n1mode1", 0);
setprop("/controls/fadec/n1mode2", 0);
setprop("/instrumentation/mk-viii/serviceable", 1);
setprop("/instrumentation/mk-viii/inputs/discretes/terr-inhibit", 0);
setprop("/instrumentation/mk-viii/inputs/discretes/gpws-inhibit", 0);
setprop("/instrumentation/mk-viii/inputs/discretes/glideslope-cancel", 0);
2017-12-29 23:37:07 +00:00
setprop("/instrumentation/mk-viii/inputs/discretes/momentary-flap-all-override", 0);
setprop("/instrumentation/mk-viii/inputs/discretes/momentary-flap-3-override", 0);
2017-07-22 16:15:00 +00:00
setprop("/controls/switches/cabinCall", 0);
setprop("/controls/switches/mechCall", 0);
2017-09-10 19:51:14 +00:00
setprop("/controls/switches/emer-lights", 0.5);
2017-07-07 19:06:38 +00:00
# cockpit voice recorder stuff
setprop("/controls/CVR/power", 0);
setprop("/controls/CVR/test", 0);
setprop("/controls/CVR/tone", 0);
setprop("/controls/CVR/gndctl", 0);
setprop("/controls/CVR/erase", 0);
2017-07-10 00:10:20 +00:00
setprop("/controls/switches/cabinfan", 1);
2017-07-27 18:26:05 +00:00
setprop("/controls/oxygen/crewOxyPB", 1); # 0 = OFF 1 = AUTO
2017-07-25 18:35:57 +00:00
setprop("/controls/switches/emerCallLtO", 0); # ON light, flashes white for 10s
setprop("/controls/switches/emerCallLtC", 0); # CALL light, flashes amber for 10s
setprop("/controls/switches/emerCall", 0);
setprop("/controls/switches/LrainRpt", 0);
setprop("/controls/switches/RrainRpt", 0);
2017-07-25 18:45:20 +00:00
setprop("/controls/switches/wiperLspd", 0); # -1 = INTM 0 = OFF 1 = LO 2 = HI
setprop("/controls/switches/wiperRspd", 0); # -1 = INTM 0 = OFF 1 = LO 2 = HI
2017-08-17 03:25:16 +00:00
setprop("/controls/lighting/strobe", 0);
setprop("/controls/lighting/beacon", 0);
2019-02-18 20:53:32 +00:00
setprop("/controls/switches/beacon", 0);
setprop("/controls/switches/wing-lights", 0);
setprop("/controls/switches/landing-lights-l", 0);
setprop("/controls/switches/landing-lights-r", 0);
2017-08-17 03:25:16 +00:00
setprop("/controls/lighting/wing-lights", 0);
setprop("/controls/lighting/nav-lights-switch", 0);
setprop("/controls/lighting/landing-lights[1]", 0);
setprop("/controls/lighting/landing-lights[2]", 0);
setprop("/controls/lighting/taxi-light-switch", 0);
2017-11-07 19:44:44 +00:00
setprop("/controls/lighting/DU/du1", 1);
setprop("/controls/lighting/DU/du2", 1);
setprop("/controls/lighting/DU/du3", 1);
setprop("/controls/lighting/DU/du4", 1);
setprop("/controls/lighting/DU/du5", 1);
setprop("/controls/lighting/DU/du6", 1);
2018-11-07 22:18:17 +00:00
setprop("/controls/lighting/DU/mcdu1", 1);
setprop("/controls/lighting/DU/mcdu2", 1);
2017-11-15 21:15:49 +00:00
setprop("/modes/fcu/hdg-time", 0);
2017-12-02 22:52:41 +00:00
setprop("/controls/switching/ATTHDG", 0);
setprop("/controls/switching/AIRDATA", 0);
2017-12-30 15:27:24 +00:00
setprop("/controls/switches/no-smoking-sign", 1);
setprop("/controls/switches/seatbelt-sign", 1);
2017-07-07 19:06:38 +00:00
}
2018-09-14 15:12:06 +00:00
var BUTTONS = {
init: func() {
var stateL = getprop("/engines/engine[0]/state");
var stateR = getprop("/engines/engine[1]/state");
var Lrain = getprop("/controls/switches/LrainRpt");
var Rrain = getprop("/controls/switches/RrainRpt");
var OnLt = getprop("/controls/switches/emerCallLtO");
var CallLt = getprop("/controls/switches/emerCallLtC");
var EmerCall = getprop("/controls/switches/emerCall");
var wow = getprop("/gear/gear[1]/wow");
var wowr = getprop("/gear/gear[2]/wow");
var gndCtl = getprop("/systems/CVR/gndctl");
var acPwr = getprop("/systems/electrical/bus/ac-ess");
},
update: func() {
rainRepel();
CVR_master();
if (getprop("/controls/switches/emerCall")) {
EmerCallOnLight();
EmerCallLight();
}
},
};
var rainRepel = func() {
2017-07-25 18:35:57 +00:00
Lrain = getprop("/controls/switches/LrainRpt");
Rrain = getprop("/controls/switches/RrainRpt");
wow = getprop("/gear/gear[1]/wow");
stateL = getprop("/engines/engine[0]/state");
stateR = getprop("/engines/engine[1]/state");
if (Lrain and (stateL != 3 and stateR != 3 and wow)) {
setprop("/controls/switches/LrainRpt", 0);
}
if (Rrain and (stateL != 3 and stateR != 3 and wow)) {
setprop("/controls/switches/RrainRpt", 0);
}
}
2018-09-14 15:12:06 +00:00
var EmerCallOnLight = func() {
2017-07-25 18:35:57 +00:00
OnLt = getprop("/controls/switches/emerCallLtO");
2018-09-14 15:12:06 +00:00
EmerCall = getprop("/controls/switches/emerCall");
if ((OnLt and EmerCall) or !EmerCall) {
2017-07-25 18:35:57 +00:00
setprop("/controls/switches/emerCallLtO", 0);
2018-09-14 15:12:06 +00:00
} else if (!OnLt and EmerCall) {
2017-07-25 18:35:57 +00:00
setprop("/controls/switches/emerCallLtO", 1);
}
}
2018-09-14 15:12:06 +00:00
var EmerCallLight = func() {
2017-07-25 18:35:57 +00:00
CallLt = getprop("/controls/switches/emerCallLtC");
2018-09-14 15:12:06 +00:00
EmerCall = getprop("/controls/switches/emerCall");
if ((CallLt and EmerCall) or !EmerCall) {
2017-07-25 18:35:57 +00:00
setprop("/controls/switches/emerCallLtC", 0);
2018-09-14 15:12:06 +00:00
} else if (!CallLt and EmerCall) {
2017-07-25 18:35:57 +00:00
setprop("/controls/switches/emerCallLtC", 1);
}
}
2017-07-22 16:15:00 +00:00
2018-09-14 15:12:06 +00:00
var CVR_master = func() {
stateL = getprop("/engines/engine[0]/state");
stateR = getprop("/engines/engine[1]/state");
wow = getprop("/gear/gear[1]/wow");
wowr = getprop("/gear/gear[2]/wow");
gndCtl = getprop("/systems/CVR/gndctl");
acPwr = getprop("/systems/electrical/bus/ac-ess");
if (acPwr > 0 and wow and wowr and (gndCtl or (stateL == 3 or stateR == 3))) {
setprop("/controls/CVR/power", 1);
} else if (!wow and !wowr and acPwr > 0) {
setprop("/controls/CVR/power", 1);
} else {
setprop("/controls/CVR/power", 0);
}
}
var EmerCall = func {
setprop("/controls/switches/emerCall", 1);
2018-09-14 14:23:09 +00:00
settimer(func() {
2018-09-14 14:25:49 +00:00
setprop("/controls/switches/emerCall", 0);
2018-09-14 15:12:06 +00:00
}, 10);
}
var CabinCall = func {
setprop("/controls/switches/cabinCall", 0);
settimer(func() {
setprop("/controls/switches/cabinCall", 0);
2017-07-22 16:15:00 +00:00
}, 15);
}
2017-07-25 18:35:57 +00:00
2017-07-22 16:15:00 +00:00
var MechCall = func {
setprop("/controls/switches/mechCall", 1);
settimer(func() {
setprop("/controls/switches/mechCall", 0);
}, 15);
}
2017-07-07 19:06:38 +00:00
var CVR_test = func {
var parkBrake = getprop("/controls/gear/brake-parking");
if (parkBrake) {
setprop("controls/CVR/tone", 1);
settimer(func() {
setprop("controls/CVR/tone", 0);
}, 15);
}
}
2019-02-24 22:06:53 +00:00
var ktsMach = props.globals.getNode("/it-autoflight/input/kts-mach", 1);
var iasSet = props.globals.getNode("/it-autoflight/input/spd-kts", 1);
var machSet = props.globals.getNode("/it-autoflight/input/spd-mach", 1);
var hdgSet = props.globals.getNode("/it-autoflight/input/hdg", 1);
var altSet = props.globals.getNode("/it-autoflight/input/alt", 1);
var altSetMode = props.globals.getNode("/it-autoflight/config/altitude-dial-mode", 1);
var vsSet = props.globals.getNode("/it-autoflight/input/vs", 1);
var fpaSet = props.globals.getNode("/it-autoflight/input/fpa", 1);
var iasNow = props.globals.getNode("/instrumentation/airspeed-indicator/indicated-speed-kt", 1);
var machNow = props.globals.getNode("/instrumentation/airspeed-indicator/indicated-mach", 1);
var spdManaged = props.globals.getNode("/it-autoflight/input/spd-managed", 1);
var showHDG = props.globals.getNode("/it-autoflight/custom/show-hdg", 1);
var trkfpaSW = props.globals.getNode("/it-autoflight/custom/trk-fpa", 1);
var latMode = props.globals.getNode("/it-autoflight/output/lat", 1);
var vertMode = props.globals.getNode("/it-autoflight/output/vert", 1);
var locArm = props.globals.getNode("/it-autoflight/output/loc-armed", 1);
var apprArm = props.globals.getNode("/it-autoflight/output/appr-armed", 1);
var dcEss = props.globals.getNode("/systems/electrical/bus/dc-ess", 1);
var fd1 = props.globals.getNode("/it-autoflight/output/fd1", 1);
var fd2 = props.globals.getNode("/it-autoflight/output/fd2", 1);
var ap1 = props.globals.getNode("/it-autoflight/output/ap1", 1);
var ap2 = props.globals.getNode("/it-autoflight/output/ap2", 1);
var athr = props.globals.getNode("/it-autoflight/output/athr", 1);
2017-07-02 14:45:39 +00:00
2019-02-24 22:06:53 +00:00
var APPanel = {
AP1: func() {
if (dcEss.getValue() >= 25) {
if (!ap1.getBoolValue()) {
setprop("it-autoflight/input/ap1", 1);
} else {
libraries.apOff("hard", 1);
}
}
},
AP2: func() {
if (dcEss.getValue() >= 25) {
if (!ap2.getBoolValue()) {
setprop("it-autoflight/input/ap2", 1);
} else {
libraries.apOff("hard", 2);
}
}
},
ATHR: func() {
if (dcEss.getValue() >= 25) {
if (!athr.getBoolValue()) {
setprop("it-autoflight/input/athr", 1);
} else {
libraries.athrOff("hard");
}
}
},
FD1: func() {
if (dcEss.getValue() >= 25) {
if (!fd1.getBoolValue()) {
setprop("it-autoflight/input/fd1", 1);
} else {
setprop("it-autoflight/input/fd1", 0);
}
}
},
FD2: func() {
if (dcEss.getValue() >= 25) {
if (!fd2.getBoolValue()) {
setprop("it-autoflight/input/fd2", 1);
} else {
setprop("it-autoflight/input/fd2", 0);
}
}
},
APDiscSoft: func() {
if (ap1.getBoolValue() or ap2.getBoolValue()) {
libraries.apOff("soft", 0);
2017-11-15 21:15:49 +00:00
} else {
2019-02-24 22:06:53 +00:00
if (getprop("/it-autoflight/sound/apoffsound") == 1 or getprop("/it-autoflight/sound/apoffsound2") == 1) {
setprop("/it-autoflight/sound/apoffsound", 0);
setprop("/it-autoflight/sound/apoffsound2", 0);
}
setprop("/it-autoflight/output/ap-warning", 0);
setprop("/ECAM/warnings/master-warning-light", 0);
2017-11-15 21:15:49 +00:00
}
2019-02-24 22:06:53 +00:00
},
ATDiscSoft: func() {
if (athr.getBoolValue()) {
libraries.athrOff("soft");
setprop("/ECAM/warnings/master-caution-light", 1);
} else {
if (getprop("/it-autoflight/output/athr-warning") == 1) {
setprop("/it-autoflight/output/athr-warning", 0);
setprop("/ECAM/warnings/master-caution-light", 0);
}
}
},
IASMach: func() {
if (dcEss.getValue() >= 25) {
if (ktsMach.getBoolValue()) {
ktsMach.setBoolValue(0);
} else {
ktsMach.setBoolValue(1);
}
}
},
SPDPush: func() {
if (dcEss.getValue() >= 25) {
if (getprop("/FMGC/internal/cruise-lvl-set") == 1 and getprop("/FMGC/internal/cost-index-set") == 1) {
spdManaged.setBoolValue(1);
fmgc.ManagedSPD.start();
}
}
},
SPDPull: func() {
if (dcEss.getValue() >= 25) {
spdManaged.setBoolValue(0);
fmgc.ManagedSPD.stop();
var ias = iasNow.getValue();
var mach = machNow.getValue();
if (!ktsMach.getBoolValue()) {
if (ias >= 100 and ias <= 350) {
iasSet.setValue(math.round(ias));
} else if (ias < 100) {
iasSet.setValue(100);
} else if (ias > 350) {
iasSet.setValue(350);
}
} else if (ktsMach.getBoolValue()) {
if (mach >= 0.50 and mach <= 0.82) {
machSet.setValue(math.round(mach, 0.001));
} else if (mach < 0.50) {
machSet.setValue(0.50);
} else if (mach > 0.82) {
machSet.setValue(0.82);
}
}
}
},
SPDAdjust: func(d) {
if (dcEss.getValue() >= 25) {
if (!spdManaged.getBoolValue()) {
if (ktsMach.getBoolValue()) {
var machTemp = machSet.getValue();
if (d == 1) {
machTemp = math.round(machTemp + 0.001, 0.001); # Kill floating point error
} else if (d == -1) {
machTemp = math.round(machTemp - 0.001, 0.001); # Kill floating point error
} else if (d == 10) {
machTemp = math.round(machTemp + 0.01, 0.01); # Kill floating point error
} else if (d == -10) {
machTemp = math.round(machTemp - 0.01, 0.01); # Kill floating point error
}
if (machTemp < 0.50) {
machSet.setValue(0.50);
} else if (machTemp > 0.82) {
machSet.setValue(0.82);
} else {
machSet.setValue(machTemp);
}
} else {
var iasTemp = iasSet.getValue();
if (d == 1) {
iasTemp = iasTemp + 1;
} else if (d == -1) {
iasTemp = iasTemp - 1;
} else if (d == 10) {
iasTemp = iasTemp + 10;
} else if (d == -10) {
iasTemp = iasTemp - 10;
}
if (iasTemp < 100) {
iasSet.setValue(100);
} else if (iasTemp > 350) {
iasSet.setValue(350);
} else {
iasSet.setValue(iasTemp);
}
}
}
}
},
HDGPush: func() {
if (fd1.getBoolValue() or fd2.getBoolValue() or ap1.getBoolValue() or ap2.getBoolValue()) {
setprop("/it-autoflight/input/lat", 1);
}
},
HDGPull: func() {
if (fd1.getBoolValue() or fd2.getBoolValue() or ap1.getBoolValue() or ap2.getBoolValue()) {
if (latMode.getValue() == 0 or !showHDG.getBoolValue()) {
setprop("/it-autoflight/input/lat", 3);
showHDG.setBoolValue(1);
} else {
setprop("/it-autoflight/input/lat", 0);
showHDG.setBoolValue(1);
}
}
},
HDGAdjust: func(d) {
if (dcEss.getValue() >= 25) {
if (latMode.getValue() != 0) {
hdgInput();
}
if (showHDG.getBoolValue()) {
var hdgTemp = hdgSet.getValue();
if (d == 1) {
hdgTemp = hdgTemp + 1;
} else if (d == -1) {
hdgTemp = hdgTemp - 1;
} else if (d == 10) {
hdgTemp = hdgTemp + 10;
} else if (d == -10) {
hdgTemp = hdgTemp - 10;
}
if (hdgTemp < 0.5) {
hdgSet.setValue(hdgTemp + 360);
} else if (hdgTemp >= 360.5) {
hdgSet.setValue(hdgTemp - 360);
} else {
hdgSet.setValue(hdgTemp);
}
}
}
},
LOCButton: func() {
if (dcEss.getValue() >= 25) {
var vertTemp = vertMode.getValue();
if ((locArm.getBoolValue() or latMode.getValue() == 2) and !apprArm.getBoolValue() and vertTemp != 2 and vertTemp != 6) {
2019-02-24 22:35:32 +00:00
if (latMode.getValue() == 2) {
setprop("/it-autoflight/input/lat", 0);
} else {
fmgc.disarmLOC();
}
if (vertTemp == 2 or vertTemp == 6) {
me.VSPull();
} else {
fmgc.disarmGS();
}
2019-02-24 22:06:53 +00:00
} else {
setprop("/it-autoflight/input/lat", 2);
2019-02-24 22:35:32 +00:00
if (vertTemp == 2 or vertTemp == 6) {
me.VSPull();
} else {
2019-02-24 22:06:53 +00:00
fmgc.disarmGS();
}
}
}
},
TRKFPA: func() {
if (dcEss.getValue() >= 25) {
fmgc.toggle_trkfpa();
}
},
ALTPush: func() {
if (dcEss.getValue() >= 25) {
# setprop("/it-autoflight/input/vert", 8); # He don't work yet m8
}
},
ALTPull: func() {
if (dcEss.getValue() >= 25) {
setprop("/it-autoflight/input/vert", 4);
}
},
ALTAdjust: func(d) {
if (dcEss.getValue() >= 25) {
var altTemp = altSet.getValue();
if (d == 1) {
if (altSetMode.getBoolValue()) {
altTemp = altTemp + 1000;
} else {
altTemp = altTemp + 100;
}
} else if (d == -1) {
if (altSetMode.getBoolValue()) {
altTemp = altTemp - 1000;
} else {
altTemp = altTemp - 100;
}
} else if (d == 2) {
altTemp = altTemp + 100;
} else if (d == -2) {
altTemp = altTemp - 100;
} else if (d == 10) {
altTemp = altTemp + 1000;
} else if (d == -10) {
altTemp = altTemp - 1000;
}
if (altTemp < 0) {
altSet.setValue(0);
} else if (altTemp > 50000) {
altSet.setValue(50000);
} else {
altSet.setValue(altTemp);
}
}
},
VSPush: func() {
if (dcEss.getValue() >= 25) {
if (trkfpaSW.getBoolValue()) {
setprop("/it-autoflight/input/vert", 5);
setprop("/it-autoflight/input/fpa", 0);
} else {
setprop("/it-autoflight/input/vert", 1);
setprop("/it-autoflight/input/vs", 0);
}
}
},
VSPull: func() {
if (dcEss.getValue() >= 25) {
if (trkfpaSW.getBoolValue()) {
setprop("/it-autoflight/input/vert", 5);
} else {
setprop("/it-autoflight/input/vert", 1);
}
}
},
VSAdjust: func(d) {
if (dcEss.getValue() >= 25) {
if (vertMode.getValue() == 1) {
var vsTemp = vsSet.getValue();
if (d == 1) {
vsTemp = vsTemp + 100;
} else if (d == -1) {
vsTemp = vsTemp - 100;
} else if (d == 10) {
vsTemp = vsTemp + 1000;
} else if (d == -10) {
vsTemp = vsTemp - 1000;
}
if (vsTemp < -6000) {
vsSet.setValue(-6000);
} else if (vsTemp > 6000) {
vsSet.setValue(6000);
} else {
vsSet.setValue(vsTemp);
}
} else if (vertMode.getValue() == 5) {
var fpaTemp = fpaSet.getValue();
if (d == 1) {
fpaTemp = math.round(fpaTemp + 0.1, 0.1);
} else if (d == -1) {
fpaTemp = math.round(fpaTemp - 0.1, 0.1);
} else if (d == 10) {
fpaTemp = fpaTemp + 1;
} else if (d == -10) {
fpaTemp = fpaTemp - 1;
}
if (fpaTemp < -9.9) {
fpaSet.setValue(-9.9);
} else if (fpaTemp > 9.9) {
fpaSet.setValue(9.9);
} else {
fpaSet.setValue(fpaTemp);
}
}
if ((vertMode.getValue() != 1 and !trkfpaSW.getBoolValue()) or (vertMode.getValue() != 5 and trkfpaSW.getBoolValue())) {
me.VSPull();
}
}
},
APPRButton: func() {
if (dcEss.getValue() >= 25) {
var vertTemp = vertMode.getValue();
if ((locArm.getBoolValue() or latMode.getValue() == 2) and (apprArm.getBoolValue() or vertTemp == 2 or vertTemp == 6)) {
2019-02-24 22:35:32 +00:00
if (latMode.getValue() == 2) {
setprop("/it-autoflight/input/lat", 0);
} else {
fmgc.disarmLOC();
}
if (vertTemp == 2 or vertTemp == 6) {
me.VSPull();
} else {
fmgc.disarmGS();
}
2019-02-24 22:06:53 +00:00
} else {
setprop("/it-autoflight/input/vert", 2);
}
}
},
};
2017-07-02 14:45:39 +00:00
var hdgInput = func {
2019-02-24 22:06:53 +00:00
if (latMode.getValue() != 0) {
showHDG.setBoolValue(1);
2017-07-02 14:45:39 +00:00
var hdgnow = getprop("/it-autoflight/input/hdg");
2017-11-15 21:15:49 +00:00
setprop("/modes/fcu/hdg-time", getprop("/sim/time/elapsed-sec"));
}
}
2017-07-02 14:45:39 +00:00
var toggleSTD = func {
var Std = getprop("/modes/altimeter/std");
if (Std == 1) {
var oldqnh = getprop("/modes/altimeter/oldqnh");
setprop("/instrumentation/altimeter/setting-inhg", oldqnh);
setprop("/modes/altimeter/std", 0);
} else if (Std == 0) {
var qnh = getprop("/instrumentation/altimeter/setting-inhg");
setprop("/modes/altimeter/oldqnh", qnh);
setprop("/instrumentation/altimeter/setting-inhg", 29.92);
setprop("/modes/altimeter/std", 1);
}
}
var increaseManVS = func {
var manvs = getprop("/systems/pressurization/outflowpos-man");
var auto = getprop("/systems/pressurization/auto");
if (manvs <= 1 and manvs >= 0 and !auto) {
setprop("/systems/pressurization/outflowpos-man", manvs + 0.001);
}
}
var decreaseManVS = func {
var manvs = getprop("/systems/pressurization/outflowpos-man");
var auto = getprop("/systems/pressurization/auto");
if (manvs <= 1 and manvs >= 0 and !auto) {
setprop("/systems/pressurization/outflowpos-man", manvs - 0.001);
}
2018-09-14 18:49:45 +00:00
}
2018-12-05 15:27:42 +00:00
var apOff = func(type, side) {
2018-12-28 12:40:12 +00:00
if (side == 0) {
setprop("/it-autoflight/input/ap1", 0);
setprop("/it-autoflight/input/ap2", 0);
} elsif (side == 1) {
setprop("/it-autoflight/input/ap1", 0);
} elsif (side == 2) {
setprop("/it-autoflight/input/ap2", 0);
2018-12-05 15:27:42 +00:00
}
2018-12-28 12:40:12 +00:00
apWarn(type);
}
var apWarn = func(type) {
if (type == "none") {
return;
} elsif (type == "soft") {
2018-12-05 15:27:42 +00:00
setprop("/ECAM/ap-off-time", getprop("/sim/time/elapsed-sec"));
setprop("/it-autoflight/output/ap-warning", 1);
2018-12-05 16:10:33 +00:00
setprop("/ECAM/warnings/master-warning-light", 1);
2018-12-05 15:27:42 +00:00
} else {
setprop("/it-autoflight/output/ap-warning", 2);
2018-12-28 12:40:12 +00:00
# master warning handled by warning system in this case
2018-12-05 16:10:33 +00:00
libraries.LowerECAM.clrLight();
2018-12-05 15:27:42 +00:00
}
}
var athrOff = func(type) {
2018-12-29 13:17:00 +00:00
if (type == "hard") {
lockThr();
}
2018-12-28 12:40:12 +00:00
setprop("/it-autoflight/input/athr", 0);
2018-12-29 13:17:00 +00:00
2018-12-28 12:40:12 +00:00
athrWarn(type);
}
var athrWarn = func(type) {
if (type == "none") {
return;
} elsif (type == "soft") {
2018-12-05 15:27:42 +00:00
setprop("/ECAM/athr-off-time", getprop("/sim/time/elapsed-sec"));
setprop("/it-autoflight/output/athr-warning", 1);
} else {
libraries.LowerECAM.clrLight();
setprop("/it-autoflight/output/athr-warning", 2);
}
setprop("/ECAM/warnings/master-caution-light", 1);
}
2018-12-29 13:17:00 +00:00
var lockThr = func() {
state1 = getprop("/systems/thrust/state1");
state2 = getprop("/systems/thrust/state2");
if ((state1 == "CL" and state2 == "CL" and getprop("/systems/thrust/eng-out") == 0) or (state1 == "MCT" and state2 == "MCT" and getprop("/systems/thrust/eng-out") == 1)) {
setprop("/systems/thrust/thr-locked", 1);
}
lockTimer.start();
}
var checkLockThr = func() {
state1 = getprop("/systems/thrust/state1");
state2 = getprop("/systems/thrust/state2");
if ((state1 != "CL" and state2 != "CL" and getprop("/systems/thrust/eng-out") == 0) or (state1 != "MCT" and state2 != "MCT" and getprop("/systems/thrust/eng-out") == 1)) {
setprop("/systems/thrust/thr-locked", 0);
lockTimer.stop();
}
}
var lockTimer = maketimer(0.02, checkLockThr);
