2018-04-09 15:07:31 +00:00
# A3XX Electronic Centralised Aircraft Monitoring System
# Jonathan Redpath (legoboyvdlp)
##############################################
# Copyright (c) Joshua Davidson (it0uchpods) #
##############################################
# Colors:
# 1 - Red, 2 - Amber, 3 - Cyan 4 - Green 5 - White
# Priority: 1 - LEVEL 3 2 - LEVEL 2 3 - LEVEL 1 4 - LEVEL 0 5 - MEMO
# LEVEL 3 has priority over all other warnings
# LEVEL 2 has priority over 1 and 0
# LEVEL 1 has priority over 0
# LEVEL 3 Messages Priority:
# Red visual warning, repetitive chime or sound
# 1 Stall
# 2 Over speed
# 3 Engine dual failure
# 4 Engine fire
# 5 APU fire
# 6 Takeoff configuration
# 7 Sidestick fault
# 8 Excessive cabin altitude
# 9 Engine oil lo pressure
# 10 L + R Elevator fault
# 11 Landing gear
# 12 Autopilot disconnection
# 13 Auto land
# 14 Smoke
# 15 Emergency configuration
# 16 Dual hydraulic failure
# LEVEL 2 Messages:
# Amber warning, single chime
# LEVEL 1 Messages:
# Amber warning, no chime
# LEVEL 0 Messages:
# No visual warning or chime: ECAM blue, green, or white message
# TYPES: Independent, Primary and Secondary, Status, and MEMO
# Operation: FWC receives electrical boolean or numeric signals, from the systems, and outputs a message, audible warning, or visual alert
# Electrical Connection: FWC1 is controlled by AC ESS, FWC2 by AC BUS 2
# Sounds: reduce volume by 6DB is engines are off
# ARINC 429: 100kb/s (high speed)
# PHASE: /FMGC/status/phase
# DISPLAY: 1 - EWD 2 - MEMO 3 - STATUS
2018-08-02 19:42:14 +00:00
# commented lines of logic are waiting for proper FMGC warning phases
2018-06-05 20:12:28 +00:00
var num_lines = 6;
var msg = nil;
var spacer = nil;
var line = nil;
2018-07-30 18:49:35 +00:00
var right_line = nil;
2018-08-03 14:48:34 +00:00
var wow = getprop("/gear/gear[1]/wow");
2018-08-02 19:42:14 +00:00
setprop("/ECAM/warnings/master-warning-light", 0);
setprop("/ECAM/warnings/master-caution-light", 0);
2018-06-05 20:12:28 +00:00
2018-07-30 18:49:35 +00:00
var warning = {
msg: "",
active: 0,
2018-07-31 14:11:12 +00:00
colour: "",
aural: "",
light: "",
2018-08-02 19:42:14 +00:00
noRepeat: 0,
new: func(msg,active,colour,aural,light,noRepeat) {
2018-07-30 18:49:35 +00:00
var t = {parents:[warning]};
t.msg = msg;
t.active = active;
2018-07-31 14:11:12 +00:00
t.colour = colour;
2018-08-02 19:42:14 +00:00
t.aural = aural;
t.light = light;
t.noRepeat = noRepeat;
2018-07-30 18:49:35 +00:00
return t
},
write: func() {
var line = 1;
while (getprop("/ECAM/msg/line" ~ line) != "") {
line = line + 1; # go to next line until empty line
2018-07-31 14:11:12 +00:00
}
# if (getprop("/ECAM/msg/line" ~ line) != me.msg)
2018-08-07 09:30:07 +00:00
if (getprop("/ECAM/msg/line" ~ line) == "" and me.active == 1 and me.msg != "") { # at empty line. Also checks if message is not blank to allow for some warnings with no displayed msg, eg stall
2018-07-31 14:11:12 +00:00
setprop("/ECAM/msg/line" ~ line, me.msg);
setprop("/ECAM/msg/linec" ~ line, me.colour);
2018-07-30 18:49:35 +00:00
}
},
2018-08-02 19:42:14 +00:00
warnlight: func() {
2018-09-28 11:26:20 +00:00
if ((me.light != "none" or me.light != "") and me.noRepeat == 0 and me.active == 1) { # only toggle light once per message, allows canceling
2018-08-02 19:42:14 +00:00
setprop("/ECAM/warnings/master-"~me.light~"-light", 1);
me.noRepeat = 1;
}
},
2018-08-03 09:36:02 +00:00
sound: func() {
2018-09-28 11:26:20 +00:00
if (me.active and (me.aural != "none" or me.aural != "") and getprop("/sim/sound/warnings/"~me.aural) != 1) {
2018-08-03 09:36:02 +00:00
setprop("/sim/sound/warnings/"~me.aural, 1);
} else if (!me.active or me.aural == "none") {
if (getprop("/sim/sound/warnings/"~me.aural) == 1) {
setprop("/sim/sound/warnings/"~me.aural, 0);
}
}
},
2018-07-30 18:49:35 +00:00
};
var memo = {
msg: "",
active: 0,
2018-07-31 14:11:12 +00:00
colour: "",
2018-08-02 19:42:14 +00:00
new: func(msg,active,colour) {
2018-07-30 18:49:35 +00:00
var t = {parents:[memo]};
t.msg = msg;
t.active = active;
2018-07-31 14:11:12 +00:00
t.colour = colour;
2018-07-30 18:49:35 +00:00
return t
},
write: func() {
var right_line = 1;
while (getprop("/ECAM/rightmsg/line" ~ right_line) != "") {
right_line = right_line + 1; # go to next line until empty line
}
2018-07-31 14:11:12 +00:00
2018-07-30 18:49:35 +00:00
if (getprop("/ECAM/rightmsg/line" ~ right_line) == "" and me.active == 1) { # at empty line
2018-07-31 14:11:12 +00:00
setprop("/ECAM/rightmsg/line" ~ right_line, me.msg);
setprop("/ECAM/rightmsg/linec" ~ right_line, me.colour);
2018-07-30 18:49:35 +00:00
}
},
};
2018-06-05 20:12:28 +00:00
# messages logic and added to arrays
2018-07-31 14:11:12 +00:00
var warnings = std.Vector.new([
2018-08-03 09:36:02 +00:00
var lg_not_dn = warning.new(msg: "L/G GEAR NOT DOWN", active: 0, colour: "r", aural: "crc", light: "warning", noRepeat: 0),
2018-09-28 11:26:20 +00:00
var pack1_fault = warning.new(msg: "AIR PACK 1 FAULT ", active: 0, colour: "a", aural: "chime", light: "caution", noRepeat: 0),
var pack1_fault_subwarn_1 = warning.new(msg: "-PACK 1.............OFF ", active: 0, colour: "c", aural: "none", light: "none", noRepeat: 0),
var pack2_fault = warning.new(msg: "AIR PACK 2 FAULT ", active: 0, colour: "a", aural: "chime", light: "caution", noRepeat: 0),
var pack2_fault_subwarn_1 = warning.new(msg: "-PACK 2.............OFF ", active: 0, colour: "c", aural: "none", light: "none", noRepeat: 0),
2018-09-28 12:43:07 +00:00
var park_brk_on = warning.new(msg: "PARK BRK ON", active: 0, colour: "a", aural: "chime", light: "caution", noRepeat: 0),
var gnd_splrs = warning.new(msg: "GND SPLRS ARMED", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
var fob_3T = warning.new(msg: "FOB BELOW 3T", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
var refuelg = warning.new(msg: "REFUELG", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
var seatbelts = warning.new(msg: "SEAT BELTS", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
2018-09-30 13:38:40 +00:00
var nosmoke = warning.new(msg: "NO SMOKING", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
2018-09-30 14:40:06 +00:00
var strobe_lt_off = warning.new(msg: "STROBE LT OFF", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0),
var gpws_flap_mode_off = warning.new(msg: "GPWS FLAP MODE OFF", active: 0, colour: "g", aural: "none", light: "none", noRepeat: 0)
2018-07-31 14:11:12 +00:00
]);
2018-07-30 18:49:35 +00:00
var memos = std.Vector.new([
2018-08-07 09:30:07 +00:00
var to_inhibit = memo.new(msg: "T.O. INHIBIT", active: 0, colour: "m"),
var ldg_inhibit = memo.new(msg: "LDG INHIBIT", active: 0, colour: "m"),
2018-08-03 14:48:34 +00:00
var spd_brk = memo.new(msg: "SPEED BRK", active: 0, colour: "g"),
var park_brk = memo.new(msg: "PARK BRK", active: 0, colour: "g"),
2018-08-07 09:30:07 +00:00
var ptu = memo.new(msg: "HYD PTU", active: 0, colour: "g"),
2018-09-28 19:34:54 +00:00
var rat = memo.new(msg: "RAT OUT", active: 0, colour: "g"),
var emer_gen = memo.new(msg: "EMER GEN", active: 0, colour: "g"),
var ram_air = memo.new(msg: "RAM AIR ON", active: 0, colour: "g"),
var nw_strg_disc = memo.new(msg: "NW STRG DISC", active: 0, colour: "g"), # Not yet implemented
var ignition = memo.new(msg: "IGNITION", active: 0, colour: "g"),
var cabin_ready = memo.new(msg: "CABIN READY", active: 0, colour: "g"), # Not yet implemented
var pred_ws_off = memo.new(msg: "PRED W/S OFF", active: 0, colour: "g"), # Not yet implemented
var terr_stby = memo.new(msg: "TERR STBY", active: 0, colour: "g"), # Not yet implemented
var tcas_stby = memo.new(msg: "TCAS STBY", active: 0, colour: "g"), # Not yet implemented
var acars_call = memo.new(msg: "ACARS CALL", active: 0, colour: "g"), # Not yet implemented
var company_call = memo.new(msg: "COMPANY CALL", active: 0, colour: "g"), # Not yet implemented
var satcom_alert = memo.new(msg: "SATCOM ALERT", active: 0, colour: "g"), # Not yet implemented
var acars_msg = memo.new(msg: "ACARS MSG", active: 0, colour: "g"), # Not yet implemented
var company_msg = memo.new(msg: "COMPANY MSG", active: 0, colour: "g"), # Not yet implemented
2018-08-07 09:30:07 +00:00
var eng_aice = memo.new(msg: "ENG A.ICE", active: 0, colour: "g"),
var wing_aice = memo.new(msg: "WING A.ICE", active: 0, colour: "g"),
2018-09-28 19:34:54 +00:00
var ice_not_det = memo.new(msg: "ICE NOT DET", active: 0, colour: "g"), # Not yet implemented
var hi_alt = memo.new(msg: "HI ALT", active: 0, colour: "g"), # Not yet implemented
var apu_avail = memo.new(msg: "APU AVAIL", active: 0, colour: "g"),
var apu_bleed = memo.new(msg: "APU BLEED", active: 0, colour: "g"), # Not yet implemented
var ldg_lt = memo.new(msg: "LDG LT", active: 0, colour: "g"),
var brk_fan = memo.new(msg: "BRK FAN", active: 0, colour: "g"), # Not yet implemented
var audio3_xfrd = memo.new(msg: "AUDIO 3 XFRD", active: 0, colour: "g"), # Not yet implemented
var switchg_pnl = memo.new(msg: "SWITCHG PNL", active: 0, colour: "g"), # Not yet implemented
var gpws_flap3 = memo.new(msg: "GPWS FLAP 3", active: 0, colour: "g"), # Not yet implemented
var hf_data_ovrd = memo.new(msg: "HF DATA OVRD", active: 0, colour: "g"), # Not yet implemented
var hf_voice = memo.new(msg: "HF VOICE", active: 0, colour: "g"), # Not yet implemented
var acars_stby = memo.new(msg: "ACARS STBY", active: 0, colour: "g"), # Not yet implemented
var vhf3_voice = memo.new(msg: "VHF3 VOICE", active: 0, colour: "g"),
var auto_brk_lo = memo.new(msg: "AUTO BRK LO", active: 0, colour: "g"),
var auto_brk_med = memo.new(msg: "AUTO BRK MED", active: 0, colour: "g"),
var auto_brk_max = memo.new(msg: "AUTO BRK MAX", active: 0, colour: "g"),
var auto_brk_off = memo.new(msg: "AUTO BRK OFF", active: 0, colour: "g"), # Not yet implemented
var man_ldg_elev = memo.new(msg: "MAN LDG ELEV", active: 0, colour: "g"), # Not yet implemented
var ctr_tk_feedg = memo.new(msg: "CTR TK FEEDG", active: 0, colour: "g"), # Not yet implemented
2018-08-07 09:30:07 +00:00
var fuelx = memo.new(msg: "FUEL X FEED", active: 0, colour: "g")
2018-07-30 18:49:35 +00:00
]);
2018-09-28 11:26:20 +00:00
var clearWarnings = std.Vector.new();
2018-07-30 18:49:35 +00:00
2018-06-05 20:12:28 +00:00
var messages_priority_3 = func {
if (getprop("/controls/flight/flap-pos") > 2 and getprop("/position/gear-agl-ft") < 750 and getprop("/gear/gear[1]/position-norm") != 1 and getprop("/FMGC/status/phase") == 5) {
2018-08-02 19:42:14 +00:00
# if ((getprop("/controls/flight/flap-pos") > 2 and getprop("/position/gear-agl-ft") < 750 and getprop("/gear/gear[1]/position-norm") != 1 and (getprop("/FMGC/status/phase") != 3 and getprop("/FMGC/status/phase") != 4 and getprop("/FMGC/status/phase") != 5)) or ((getprop("/engines/engine[0]/n1-actual") < 75.0 and getprop("/engines/engine[1]/n1-actual") < 75.0) and getprop("/position/gear-agl-ft") < 750 and getprop("/gear/gear[1]/position-norm") != 1 and (getprop("/FMGC/status/phase") != 3 and getprop("/FMGC/status/phase") != 4 and getprop("/FMGC/status/phase") != 5 and getprop("/FMGC/status/phase") != 6)) or (((getprop("/engines/engine[0]/n1-actual") < 77.0 and getprop("/controls/engines/engine[1]/cutoff-switch") == 0) or (getprop("/engines/engine[1]/n1-actual") < 77.0 and getprop("/controls/engines/engine[0]/cutoff-switch") == 0) and getprop("/position/gear-agl-ft") < 750 and getprop("/gear/gear[1]/position-norm") != 1 and (getprop("/FMGC/status/phase") != 3 and getprop("/FMGC/status/phase") != 4 and getprop("/FMGC/status/phase") != 5 and getprop("/FMGC/status/phase") != 6))) {
2018-09-28 12:43:07 +00:00
lg_not_dn.active = 1;
2018-07-30 18:49:35 +00:00
} else {
lg_not_dn.active = 0;
2018-08-02 19:42:14 +00:00
lg_not_dn.noRepeat = 0;
2018-04-09 15:07:31 +00:00
}
2018-06-05 20:12:28 +00:00
}
2018-08-03 09:36:02 +00:00
var messages_priority_2 = func {
2018-09-28 11:26:20 +00:00
if ((((getprop("/FMGC/status/phase") >= 1 and getprop("/FMGC/status/phase") <= 2) or (getprop("/FMGC/status/phase") >= 9 and getprop("/FMGC/status/phase") <= 10) and (wow and getprop("/engines/engine[0]/state") == 3)) or getprop("/FMGC/status/phase") == 6) and getprop("/systems/failures/pack1") == 1) {
pack1_fault.active = 1;
} else {
pack1_fault.active = 0;
}
if (pack1_fault.active == 1 and getprop("/controls/pneumatic/switches/pack1") == 1) {
pack1_fault_subwarn_1.active = 1;
} else {
pack1_fault_subwarn_1.active = 0;
}
if ((((getprop("/FMGC/status/phase") >= 1 and getprop("/FMGC/status/phase") <= 2) or (getprop("/FMGC/status/phase") >= 9 and getprop("/FMGC/status/phase") <= 10) and (wow and getprop("/engines/engine[1]/state") == 3)) or getprop("/FMGC/status/phase") == 6) and getprop("/systems/failures/pack2") == 1) {
pack2_fault.active = 1;
} else {
pack2_fault.active = 0;
}
if (pack2_fault.active == 1 and getprop("/controls/pneumatic/switches/pack2") == 1) {
pack2_fault_subwarn_1.active = 1;
} else {
pack2_fault_subwarn_1.active = 0;
}
2018-08-03 09:36:02 +00:00
# if (getprop("/controls/gear/brake-parking") and (getprop("/FMGC/status/phase") >= 6 and getprop("/FMGC/status/phase") <= 7)) {
if (getprop("/controls/gear/brake-parking") and (getprop("/FMGC/status/phase") >= 2 and getprop("/FMGC/status/phase") <= 5)) {
park_brk_on.active = 1;
} else {
park_brk_on.active = 0;
park_brk_on.noRepeat = 0;
}
}
2018-06-05 20:12:28 +00:00
var messages_priority_1 = func {}
var messages_priority_0 = func {}
2018-09-28 12:43:07 +00:00
var messages_memo = func {
if (getprop("/services/fuel-truck/enable") == 1 and getprop("/ECAM/left-msg") != "TO-MEMO" and getprop("/ECAM/left-msg") != "LDG-MEMO") {
refuelg.active = 1;
2018-08-07 09:30:07 +00:00
} else {
2018-09-28 12:43:07 +00:00
refuelg.active = 0;
2018-08-07 09:30:07 +00:00
}
2018-09-28 12:43:07 +00:00
if (getprop("/controls/flight/speedbrake-arm") == 1) {
2018-07-30 18:49:35 +00:00
gnd_splrs.active = 1;
2018-07-30 11:53:33 +00:00
} else {
2018-07-30 18:49:35 +00:00
gnd_splrs.active = 0;
2018-07-30 11:53:33 +00:00
}
2018-08-02 19:42:14 +00:00
2018-09-28 12:43:07 +00:00
if (getprop("/controls/switches/seatbelt-sign") == 1) {
seatbelts.active = 1;
2018-07-30 11:53:33 +00:00
} else {
2018-09-28 12:43:07 +00:00
seatbelts.active = 0;
2018-06-05 20:12:28 +00:00
}
2018-09-28 12:43:07 +00:00
if (getprop("/controls/switches/no-smoking-sign") == 1) {
nosmoke.active = 1;
2018-08-02 19:42:14 +00:00
} else {
2018-09-28 12:43:07 +00:00
nosmoke.active = 0;
2018-08-02 19:42:14 +00:00
}
2018-09-30 13:38:40 +00:00
if (getprop("/controls/lighting/strobe") == 0 and getprop("/gear/gear[1]/wow") == 0) {
strobe_lt_off.active = 1;
} else {
strobe_lt_off.active = 0;
}
2018-09-30 14:40:06 +00:00
if (getprop("instrumentation/mk-viii/inputs/discretes/momentary-flap-all-override") == 1) {
gpws_flap_mode_off.active = 1;
} else {
gpws_flap_mode_off.active = 0;
}
2018-08-03 14:48:34 +00:00
2018-09-28 12:43:07 +00:00
if (getprop("/consumables/fuel/total-fuel-lbs") < 6000 and getprop("/ECAM/left-msg") != "TO-MEMO" and getprop("/ECAM/left-msg") != "LDG-MEMO") { # assuming US short ton 2000lb
fob_3T.active = 1;
2018-08-03 14:48:34 +00:00
} else {
2018-09-28 12:43:07 +00:00
fob_3T.active = 0;
}
}
var messages_right_memo = func {
if (getprop("/FMGC/status/phase") >= 3 and getprop("/FMGC/status/phase") <= 5) {
to_inhibit.active = 1;
} else {
to_inhibit.active = 0;
2018-08-03 14:48:34 +00:00
}
2018-09-28 12:43:07 +00:00
if (getprop("/FMGC/status/phase") >= 7 and getprop("/FMGC/status/phase") <= 7) {
ldg_inhibit.active = 1;
2018-08-03 14:48:34 +00:00
} else {
2018-09-28 12:43:07 +00:00
ldg_inhibit.active = 0;
2018-08-03 14:48:34 +00:00
}
if ((getprop("/FMGC/status/phase") >= 2 and getprop("/FMGC/status/phase") <= 7) and getprop("controls/flight/speedbrake") != 0) {
spd_brk.active = 1;
} else {
spd_brk.active = 0;
}
if (getprop("/systems/thrust/state1") == "IDLE" and getprop("/systems/thrust/state2") == "IDLE" and getprop("/FMGC/status/phase") >= 6 and getprop("/FMGC/status/phase") <= 7) {
spd_brk.colour = "g";
} else if ((getprop("/FMGC/status/phase") >= 2 and getprop("/FMGC/status/phase") <= 5) or ((getprop("/systems/thrust/state1") != "IDLE" or getprop("/systems/thrust/state2") != "IDLE") and (getprop("/FMGC/status/phase") >= 6 and getprop("/FMGC/status/phase") <= 7))) {
spd_brk.colour = "a";
}
2018-09-28 12:43:07 +00:00
#if (getprop("/controls/gear/brake-parking") == 1 and getprop("/FMGC/status/phase") != 3) {
if (getprop("/controls/gear/brake-parking") == 1) {
park_brk.active = 1;
2018-08-07 09:30:07 +00:00
} else {
2018-09-28 12:43:07 +00:00
park_brk.active = 0;
2018-08-07 09:30:07 +00:00
}
2018-09-28 12:43:07 +00:00
if (getprop("/FMGC/status/phase") >= 4 and getprop("/FMGC/status/phase") <= 8) {
park_brk.colour = "a";
2018-08-07 09:30:07 +00:00
} else {
2018-09-28 12:43:07 +00:00
park_brk.colour = "g";
2018-08-07 09:30:07 +00:00
}
if (getprop("/controls/hydraulic/ptu") == 1 and ((getprop("/systems/hydraulic/yellow-psi") < 1450 and getprop("/systems/hydraulic/green-psi") > 1450 and getprop("/controls/hydraulic/elec-pump-yellow") == 0) or (getprop("/systems/hydraulic/yellow-psi") > 1450 and getprop("/systems/hydraulic/green-psi") < 1450))) {
ptu.active = 1;
} else {
ptu.active = 0;
}
if (getprop("/controls/hydraulic/rat-deployed") == 1) {
rat.active = 1;
} else {
rat.active = 0;
}
if (getprop("/FMGC/status/phase") >= 1 and getprop("/FMGC/status/phase") <= 2) {
rat.colour = "a";
} else {
rat.colour = "g";
}
2018-09-28 12:43:07 +00:00
if (getprop("/controls/electrical/switches/emer-gen") == 1 and getprop("/controls/hydraulic/rat-deployed") == 1 and !wow) {
emer_gen.active = 1;
} else {
emer_gen.active = 0;
}
if (getprop("/controls/pneumatic/switches/ram-air") == 1) {
ram_air.active = 1;
} else {
ram_air.active = 0;
}
2018-09-28 19:34:54 +00:00
if (getprop("/controls/engines/engine[0]/igniter-a") == 1 or getprop("/controls/engines/engine[0]/igniter-b") == 1 or getprop("/controls/engines/engine[1]/igniter-a") == 1 or getprop("/controls/engines/engine[1]/igniter-b") == 1) {
ignition.active = 1;
} else {
ignition.active = 0;
}
if (apu_bleed.active == 0 and getprop("/systems/apu/rpm") >= 95) {
apu_avail.active = 1;
} else {
apu_avail.active = 0;
}
if (getprop("/controls/lighting/landing-lights[1]") > 0 or getprop("/controls/lighting/landing-lights[2]") > 0) {
ldg_lt.active = 1;
} else {
ldg_lt.active = 0;
}
2018-08-07 09:30:07 +00:00
if (getprop("/controls/switches/leng") == 1 or getprop("/controls/switches/reng") == 1 or getprop("/systems/electrical/bus/dc1") == 0 or getprop("/systems/electrical/bus/dc2") == 0) {
eng_aice.active = 1;
} else {
eng_aice.active = 0;
}
if (getprop("/controls/switches/wing") == 1) {
2018-09-28 12:43:07 +00:00
wing_aice.active = 1;
2018-08-07 09:30:07 +00:00
} else {
2018-09-28 12:43:07 +00:00
wing_aice.active = 0;
}
2018-09-28 19:34:54 +00:00
if (getprop("/instrumentation/comm[2]/frequencies/selected-mhz") != 0) {
vhf3_voice.active = 1;
} else {
vhf3_voice.active = 0;
}
if (getprop("/controls/autobrake/mode") == 1) {
auto_brk_lo.active = 1;
} else {
auto_brk_lo.active = 0;
}
if (getprop("/controls/autobrake/mode") == 2) {
auto_brk_med.active = 1;
} else {
auto_brk_med.active = 0;
}
if (getprop("/controls/autobrake/mode") == 3) {
auto_brk_max.active = 1;
} else {
auto_brk_max.active = 0;
}
2018-09-28 12:43:07 +00:00
if (getprop("/systems/fuel/x-feed") == 1 and getprop("controls/fuel/x-feed") == 1) {
fuelx.active = 1;
} else {
fuelx.active = 0;
}
if (getprop("/FMGC/status/phase") >= 3 and getprop("/FMGC/status/phase") <= 5) {
fuelx.colour = "a";
} else {
fuelx.colour = "g";
2018-08-07 09:30:07 +00:00
}
2018-06-05 20:12:28 +00:00
}
2018-04-09 15:07:31 +00:00
2018-06-05 20:12:28 +00:00
# Finally the controller
2018-04-09 15:07:31 +00:00
2018-06-05 20:12:28 +00:00
var ECAM_controller = {
loop: func() {
2018-04-09 15:07:31 +00:00
2018-06-05 20:12:28 +00:00
# check active messages
# config_warnings();
messages_priority_3();
messages_priority_2();
messages_priority_1();
messages_priority_0();
messages_memo();
2018-07-30 11:53:33 +00:00
messages_right_memo();
2018-06-05 20:12:28 +00:00
2018-07-31 14:11:12 +00:00
# clear display momentarily
2018-07-30 11:53:33 +00:00
2018-07-30 18:49:35 +00:00
if (warnings.size() > 0) {
2018-07-31 14:11:12 +00:00
for(var n=1; n<8; n+=1) {
2018-08-02 19:42:14 +00:00
setprop("/ECAM/msg/line" ~ n, "");
2018-07-30 18:49:35 +00:00
}
2018-06-06 20:46:41 +00:00
}
2018-07-30 11:53:33 +00:00
2018-07-30 18:49:35 +00:00
if (memos.size() > 0) {
2018-07-31 14:11:12 +00:00
for(var n=1; n<8; n+=1) {
2018-08-02 19:42:14 +00:00
setprop("/ECAM/rightmsg/line" ~ n, "");
2018-07-30 18:49:35 +00:00
}
2018-07-30 11:53:33 +00:00
}
2018-07-31 14:11:12 +00:00
# write to ECAM
foreach (var i; warnings.vector) {
i.write();
2018-08-02 19:42:14 +00:00
i.warnlight();
2018-08-03 09:36:02 +00:00
i.sound();
2018-07-31 14:11:12 +00:00
}
foreach (var m; memos.vector) {
m.write();
}
2018-04-09 15:07:31 +00:00
},
2018-09-28 19:34:54 +00:00
};
