|
|
||
|---|---|---|
| .. | ||
| firmware | ||
| pcb | ||
| README.md | ||
Pedestal Connect Box
USB HID
Input
25 Bytes of input, consisting of
- 1 Byte reportId (always value 1)
- 22 Bytes for 11 axis (each axis is 2 bytes and has a range of 0 - 4095)
- 8 Bytes for buttons
Inputs report usually via USB HID so you only have to map them.
Output
9 Byte output, consisting of
- 1 Byte for the reportId (always value 1)
- 2 Bytes for the brightness of the integrated lighting (range 0-48000)
- 2 Bytes for the brightness of the rudder trim display (range 0-48000)
- 2 Bytes for indicator LEDs, each bit controls one item:
- 0x0001: DOOR OPEN
- 0x0002: DOOR FAULT
- 0x0004: ENG 1 FAULT
- 0x0008: ENG 1 FIRE
- 0x0010: ENG 2 FAULT
- 0x0020: ENG 2 FIRE
- 2 Bytes for ECAM page LEDs
- 0x0001: ECAM CLR
- 0x0002: ECAM APU
- 0x0004: ECAM ENG
- 0x0008: ECAM COND
- 0x0010: ECAM BLEED
- 0x0020: ECAM STS
- 0x0040: ECAM DOOR
- 0x0080: ECAM PRESS
- 0x0100: ECAM WHEEL
- 0x0200: ECAM ELEC
- 0x0400: ECAM F/CTL
- 0x0800: ECAM HYD
- 0x1000: ECAM FUEL
- 2 Bytes for generic controls (such as calibration)
Pinout
General pins
PA15|Backlight PWM
Rudder Trim Panel
PA0|Reset PA1|Trim Left PA3|Parking Brake PB10|Display PWM PB13|SPI Clock PB14|SPI Chip Select PB15|SPI Data PC15|Trim Right
Speed Brake
PA2|Speed Brake PA4|Spoiler Arm
Flaps
PA5|Flaps
Gravity Gear Extension
PA6|Gravity Gear Extension
Flood Light and DFDR
PA7|Flood Light Pedestal PC4|DFDR PC5|AIDS
Switching
PA8|ATT Captain PA9|AIR Captain PA10|ATT First Officer PC6|EIS Captain PC9|AIR First Officer PD13|ECAM First Officer PD14|ECAM Captain PD15|EIS First Officer
ECAM
PB0|Upper ECAM Brightness PB1|Lower ECAM Brightness PB2|Keys Column 4 PB11|LEDs Column 6 PB12|LEDs Row 1 PC7|LEDs Column 2 PC8|LEDs Column 3 PD8|LEDs Column 5 PD9|LEDs Column 1 PD10|LEDs Column 4 PD11|Keys Column 1 PD12|Keys Column 2 PE7|Keys Row 4 PE8|Keys Column 3 PE9|LEDs Row 3 PE10|Keys Column 5 PE11|Keys Row 3 PE12|Keys Row 1 PE13|LEDs Row 2 PE14|Keys Column 6 PE15|Keys Row 2
Weather Radar
PB4|MAP PB5|PWS PC2|Tilt PC3|Gain PD1|System 1 PD3|System 2 PD4|Multiscan PD5|WX+T PD6|CCS PD7|TURB
Door
PB6|Fault Light PB7|Open Light PB8|Unlock PB9|Lock PE0|Video
Flood Light and Integ Light
PC0|Flood Light MIP PC1|Integ Light
Engine
PC13|Mode Crank PC14|Mode Start PE1|Engine 1 Fire PE2|Engine 1 Fault PE3|Engine 2 Fault PE4|Engine 2 Fire PE5|Engine 1 Master PE6|Engine 2 Master