fly/A320-family
1
0
Fork 0
Code Activity
A320-family/Systems/a320-fwc.xml
legoboyvdlp R dfab6c518f Much improved pneumatics warnings
2020-05-10 23:58:26 +01:00

412 lines
14 KiB
XML
Raw Blame History

<!-- Airbus A320 FWC -->
<!-- Copyright (c) 2019 Jonathan Redpath -->
<system name="A320: FWC">
<channel name="FWC" execrate="8">
<actuator name="/ECAM/phases/timer/eng1idle-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/phases/timer/eng1idle</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.033</rate_limit> <!-- 30 seconds -->
</actuator>
<actuator name="/ECAM/phases/timer/eng2idle-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/phases/timer/eng2idle</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.033</rate_limit> <!-- 30 seconds -->
</actuator>
<actuator name="/ECAM/phases/timer/eng1or2-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/phases/timer/eng1or2</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.033</rate_limit> <!-- 30 seconds -->
</actuator>
<actuator name="/ECAM/phases/timer/to-inhibit-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/phases/timer/to-inhibit</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.33</rate_limit> <!-- 3 seconds -->
</actuator>
<actuator name="/ECAM/phases/timer/ldg-inhibit-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/phases/timer/ldg-inhibit</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.33</rate_limit> <!-- 3 seconds -->
</actuator>
<actuator name="/ECAM/warnings/timer/bleed-1-fault-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/warnings/timer/bleed-1-fault</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.2</rate_limit> <!-- 5 seconds -->
</actuator>
<actuator name="/ECAM/warnings/timer/bleed-2-fault-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/warnings/timer/bleed-2-fault</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.2</rate_limit> <!-- 5 seconds -->
</actuator>
<actuator name="/ECAM/warnings/timer/apu-fault-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/warnings/logic/apu-bleed-fault</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.1</rate_limit> <!-- 10 seconds -->
</actuator>
<actuator name="/ECAM/warnings/timer/xbleed-fault-output">
<description>Timer for the ECAM system</description>
<input>/systems/pneumatics/warnings/crossbleed-disag</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.1</rate_limit> <!-- 10 seconds -->
</actuator>
<actuator name="/ECAM/warnings/timer/prv-1-not-shut-apu-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/warnings/logic/prv-1-not-shut-apu</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">1</rate_limit> <!-- 1 second -->
</actuator>
<actuator name="/ECAM/warnings/timer/prv-2-not-shut-apu-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/warnings/logic/prv-2-not-shut-apu</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">1</rate_limit> <!-- 1 second -->
</actuator>
<actuator name="/ECAM/warnings/timer/prv-1-not-shut-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/warnings/logic/prv-1-not-shut</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">1</rate_limit> <!-- 1 second -->
</actuator>
<actuator name="/ECAM/warnings/timer/prv-2-not-shut-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/warnings/logic/prv-2-not-shut</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">1</rate_limit> <!-- 1 second -->
</actuator>
<actuator name="/ECAM/warnings/timer/bleed-1-and-2-low-temp-output">
<description>Timer for the ECAM system</description>
<input>/ECAM/warnings/timer/bleed-1-and-2-low-temp</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.00185185</rate_limit> <!-- 540 seconds -->
</actuator>
<actuator name="/ECAM/warnings/timer/bleed-1-low-temp-output">
<description>Timer for the ECAM system</description>
<input>/systems/pneumatics/warnings/lowtemp-1</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.016666</rate_limit> <!-- 60 seconds -->
</actuator>
<actuator name="/ECAM/warnings/timer/bleed-2-low-temp-output">
<description>Timer for the ECAM system</description>
<input>/systems/pneumatics/warnings/lowtemp-2</input>
<rate_limit sense="decr">100</rate_limit> <!-- Instant -->
<rate_limit sense="incr">0.016666</rate_limit> <!-- 60 seconds -->
</actuator>
</channel>
<channel name="ECAM">
<switch name="/ECAM/warnings/logic/apu-bleed-fault">
<default value="0"/>
<test logic="AND" value="1">
<test logic="OR">
/systems/electrical/bus/dc-2 ge 25
/systems/electrical/relay/dc-ess-feed-bat/contact-pos eq 1
</test>
<test logic="OR">
<test logic="AND">
/systems/apu/available eq 1
/controls/apu/master eq 1
/controls/pneumatics/switches/apu eq 0
/systems/pneumatics/valves/apu-bleed-valve ne 0
</test>
<test logic="AND">
/systems/apu/available eq 1
/controls/apu/master eq 1
/controls/pneumatics/switches/apu eq 1
/systems/pneumatics/valves/apu-bleed-valve ne 1
</test>
</test>
</test>
</switch>
<switch name="/ECAM/warnings/logic/prv-1-not-shut-apu">
<default value="0"/>
<test logic="AND" value="1">
/systems/apu/available eq 1
/controls/pneumatics/switches/apu eq 1
/systems/pneumatics/valves/engine-1-prv-valve-disag eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/prv-2-not-shut-apu">
<default value="0"/>
<test logic="AND" value="1">
/systems/apu/available eq 1
/controls/pneumatics/switches/apu eq 1
/systems/pneumatics/valves/engine-2-prv-valve-disag eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/prv-1-not-shut-apu-reset">
<default value="0"/>
<test logic="OR" value="1">
<test logic="AND">
/controls/pneumatics/switches/bleed-1 eq 0
/ECAM/warnings/logic/engine-1-prv-valve-falling-pulse eq 0 <!-- inverse -->
</test>
/ECAM/warning-phase eq 1
<test logic="AND">
/engines/engine[0]/state eq 3
<test logic="AND">
/ECAM/warnings/logic/apu-bleed-sw-pulse eq 1
/controls/pneumatics/switches/apu eq 1
</test>
</test>
</test>
</switch>
<switch name="/ECAM/warnings/logic/prv-2-not-shut-apu-reset">
<default value="0"/>
<test logic="OR" value="1">
<test logic="AND">
/controls/pneumatics/switches/bleed-2 eq 0
/ECAM/warnings/logic/engine-2-prv-valve-falling-pulse eq 0 <!-- inverse -->
</test>
/ECAM/warning-phase eq 1
<test logic="AND">
/engines/engine[1]/state eq 3
<test logic="AND">
/ECAM/warnings/logic/apu-bleed-sw-pulse eq 1
/controls/pneumatics/switches/apu eq 1
</test>
</test>
</test>
</switch>
<switch name="/ECAM/warnings/logic/prv-1-not-shut">
<default value="0"/>
<test logic="OR" value="1">
/ECAM/warnings/logic/prv-1-not-shut-apu-flipflop-output eq 1
<test logic="AND">
/engines/engine[0]/state ne 3
/systems/pneumatics/valves/engine-1-prv-valve-disag eq 1
</test>
<test logic="AND">
/systems/pneumatics/valves/starter-valve-1 ne 0
/systems/pneumatics/valves/engine-1-prv-valve-disag eq 1
</test>
</test>
</switch>
<switch name="/ECAM/warnings/logic/prv-2-not-shut">
<default value="0"/>
<test logic="OR" value="1">
/ECAM/warnings/logic/prv-2-not-shut-apu-flipflop-output eq 1
<test logic="AND">
/engines/engine[1]/state ne 3
/systems/pneumatics/valves/engine-2-prv-valve-disag eq 1
</test>
<test logic="AND">
/systems/pneumatics/valves/starter-valve-2 ne 0
/systems/pneumatics/valves/engine-2-prv-valve-disag eq 1
</test>
</test>
</switch>
<switch name="/ECAM/warnings/logic/crossbleed-fault">
<default value="0"/>
<test logic="OR" value="1">
/ECAM/warnings/timer/xbleed-fault-output eq 1
<test logic="AND">
/ECAM/warnings/timer/xbleed-fault-output-10 eq 1
/ECAM/warnings/timer/xbleed-fault-output-15 eq 0
</test>
</test>
</switch>
<switch name="/ECAM/warnings/logic/crossbleed-wai">
<default value="0"/>
<test logic="AND" value="1">
/systems/apu/available eq 1
/controls/pneumatics/switches/apu eq 1
/systems/pneumatics/valves/engine-1-prv-valve eq 0
/systems/pneumatics/valves/engine-2-prv-valve eq 0
/systems/pneumatics/warnings/crossbleed-disag-open eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-low-temp-reset">
<default value="0"/>
<test logic="OR" value="1">
<test logic="AND">
/controls/switches/wing eq 0
/ECAM/warnings/logic/wai-falling-pulse eq 0
</test>
/gear/gear[1]/wow eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-1-not-avail">
<default value="0"/>
<test logic="OR" value="1">
/engines/engine[0]/state ne 3
/controls/pneumatics/switches/bleed-1 eq 0
/systems/pneumatics/valves/engine-1-prv-valve-autoclose-cmd eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-2-not-avail">
<default value="0"/>
<test logic="OR" value="1">
/engines/engine[1]/state ne 3
/controls/pneumatics/switches/bleed-2 eq 0
/systems/pneumatics/valves/engine-2-prv-valve-autoclose-cmd eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-1-or-2-not-avail">
<default value="0"/>
<test logic="OR" value="1">
/ECAM/warnings/logic/bleed-1-not-avail eq 1
/ECAM/warnings/logic/bleed-2-not-avail eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-apu-is-in-use">
<default value="0"/>
<test logic="AND" value="1">
/systems/apu/available eq 1
/controls/pneumatics/switches/apu eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-1-avail">
<default value="0"/>
<test logic="OR" value="1">
/ECAM/warnings/logic/bleed-1-not-avail eq 0
/ECAM/warnings/logic/bleed-apu-is-in-use eq 1
<test logic="AND">
/systems/pneumatics/valves/crossbleed-valve eq 1
/ECAM/warnings/logic/bleed-2-not-avail eq 0
</test>
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-2-avail">
<default value="0"/>
<test logic="OR" value="1">
/ECAM/warnings/logic/bleed-2-not-avail eq 0
<test logic="AND">
/systems/pneumatics/valves/crossbleed-valve eq 1
<test logic="OR">
/ECAM/warnings/logic/bleed-1-not-avail eq 0
/ECAM/warnings/logic/bleed-apu-is-in-use eq 1
</test>
</test>
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-1-wai-avail">
<default value="0"/>
<test logic="AND" value="1">
/ECAM/warnings/logic/bleed-apu-is-in-use eq 0
/ECAM/warnings/logic/bleed-1-avail eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-2-wai-avail">
<default value="0"/>
<test logic="AND" value="1">
/ECAM/warnings/logic/bleed-apu-is-in-use eq 0
/ECAM/warnings/logic/bleed-2-avail eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-1-lo-temp-xbleed">
<default value="0"/>
<test logic="AND" value="1">
/ECAM/warnings/logic/bleed-2-wai-avail eq 1 <!-- deliberate -->
/systems/pneumatics/valves/crossbleed-valve eq 0
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-1-lo-temp-bleed">
<default value="0"/>
<test logic="AND" value="1">
/ECAM/warnings/logic/bleed-2-wai-avail eq 1
/controls/pneumatics/switches/bleed-1 eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-1-lo-temp-pack">
<default value="0"/>
<test logic="AND" value="1">
/ECAM/warnings/logic/bleed-2-wai-avail eq 1
/controls/pneumatics/switches/pack-1 eq 1
/controls/pneumatics/switches/pack-2 eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-1-lo-temp-unsucc">
<default value="0"/>
<test logic="OR" value="1">
/ECAM/warnings/logic/bleed-2-wai-avail eq 0
/ECAM/warnings/logic/bleed-1-lo-temp-xbleed eq 1
/ECAM/warnings/logic/bleed-1-lo-temp-bleed eq 1
/ECAM/warnings/logic/bleed-1-lo-temp-pack eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-2-lo-temp-xbleed">
<default value="0"/>
<test logic="AND" value="1">
/ECAM/warnings/logic/bleed-1-wai-avail eq 1 <!-- deliberate -->
/systems/pneumatics/valves/crossbleed-valve eq 0
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-2-lo-temp-bleed">
<default value="0"/>
<test logic="AND" value="1">
/ECAM/warnings/logic/bleed-1-wai-avail eq 1
/controls/pneumatics/switches/bleed-2 eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-2-lo-temp-pack">
<default value="0"/>
<test logic="AND" value="1">
/ECAM/warnings/logic/bleed-1-wai-avail eq 1
/controls/pneumatics/switches/pack-1 eq 1
/controls/pneumatics/switches/pack-2 eq 1
</test>
</switch>
<switch name="/ECAM/warnings/logic/bleed-2-lo-temp-unsucc">
<default value="0"/>
<test logic="OR" value="1">
/ECAM/warnings/logic/bleed-1-wai-avail eq 0
/ECAM/warnings/logic/bleed-2-lo-temp-xbleed eq 1
/ECAM/warnings/logic/bleed-2-lo-temp-bleed eq 1
/ECAM/warnings/logic/bleed-2-lo-temp-pack eq 1
</test>
</switch>
</channel>
</system>
View git blame Copy permalink