986 lines
76 KiB
Text
986 lines
76 KiB
Text
# A3XX Electronic Centralised Aircraft Monitoring System
|
|
# Copyright (c) 2021 Jonathan Redpath (legoboyvdlp)
|
|
|
|
# messages stored in vectors
|
|
|
|
# Lights: 0 = red, 1 = yellow, 9 = none
|
|
# Sounds: 0 = master warn, 1 = chime, 9 = other
|
|
|
|
# Left E/WD
|
|
|
|
var warnings = std.Vector.new([
|
|
# LEVEL 3 WARN
|
|
var stall = warning.new(msg: "", aural: 2),
|
|
var flap_not_zero = warning.new(msg: "F/CTL FLAP LVR NOT ZERO", colour: "r", aural: 0, light: 0, isMainMsg: 1),
|
|
|
|
var overspeed = warning.new(msg: "OVER SPEED", colour: "r", aural: 0, light: 0, isMainMsg: 1),
|
|
var overspeedVMO = warning.new(msg: " -VMO/MMO.......350 /.82", colour: "r"),
|
|
var overspeedGear = warning.new(msg: " -VLE...........280 /.67", colour: "r"),
|
|
var overspeedFlap = warning.new(msg: " -VFE................XXX", colour: "r"),
|
|
|
|
var allEngFail = warning.new(msg: "ENG ALL ENGINES FAILURE", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "enginePage"),
|
|
var allEngFailElec = warning.new(msg: " -EMER ELEC PWR...MAN ON", colour: "c"),
|
|
var allEngFailSPD1 = warning.new(msg: " OPT RELIGHT SPD.260/.77", colour: "c"),
|
|
var allEngFailSPD2 = warning.new(msg: " OPT RELIGHT SPD.270/.77", colour: "c"),
|
|
var allEngFailSPD3 = warning.new(msg: " OPT RELIGHT SPD.280/.77", colour: "c"),
|
|
var allEngFailSPD4 = warning.new(msg: " OPT RELIGHT SPD.300/.77", colour: "c"),
|
|
var allEngFailAPU = warning.new(msg: " -APU..............START", colour: "c"),
|
|
var allEngFailLevers = warning.new(msg: " -THR LEVERS........IDLE", colour: "c"),
|
|
var allEngFailFAC = warning.new(msg: " -FAC 1......OFF THEN ON", colour: "c"),
|
|
var allEngFailGlide = warning.new(msg: " GLDG DIST: 2NM/1000FT", colour: "c"),
|
|
var allEngFailDiversion = warning.new(msg: " -DIVERSION.....INITIATE", colour: "c"),
|
|
var allEngFailProc = warning.new(msg: " -ALL ENG FAIL PROC.APPLY", colour: "c"),
|
|
|
|
# ENG 1 THR LEVER ABV IDLE
|
|
var eng1ThrLvrAbvIdle = warning.new(msg: "ENG 1 THR LEVER ABV IDLE", colour: "r", aural: 3, light: 0, isMainMsg: 1),
|
|
var eng1ThrLvrAbvIdle2 = warning.new(msg: " -THR LEVER 1.......IDLE", colour: "c"),
|
|
|
|
# ENG 2 THR LEVER ABV IDLE
|
|
var eng2ThrLvrAbvIdle = warning.new(msg: "ENG 2 THR LEVER ABV IDLE", colour: "r", aural: 3, light: 0, isMainMsg: 1),
|
|
var eng2ThrLvrAbvIdle2 = warning.new(msg: " -THR LEVER 2.......IDLE", colour: "c"),
|
|
|
|
# ENG 1 FIRE (flight)
|
|
var eng1Fire = warning.new(msg: "ENG 1 FIRE", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "enginePage"),
|
|
var eng1FireFllever = warning.new(msg: " -THR LEVER 1.......IDLE", colour: "c"),
|
|
var eng1FireFlmaster = warning.new(msg: " -ENG MASTER 1.......OFF", colour: "c"),
|
|
var eng1FireFlPB = warning.new(msg: " -ENG 1 FIRE P/B....PUSH", colour: "c"),
|
|
var eng1FireFlAgent1Timer = warning.new(msg: " -AGENT 1 AFT 10 S.DISCH", colour: "w"),
|
|
var eng1FireFlAgent1 = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"),
|
|
var eng1FireFlATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"),
|
|
var eng1FireFl30Sec = warning.new(msg: " .IF FIRE AFTER 30 S:", colour: "w"),
|
|
var eng1FireFlAgent2 = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"),
|
|
|
|
# ENG 1 FIRE (ground)
|
|
var eng1FireGnlever = warning.new(msg: " -THR LEVERS........IDLE", colour: "c"),
|
|
var eng1FireGnstopped = warning.new(msg: " .WHEN A/C IS STOPPED:", colour: "w"),
|
|
var eng1FireGnparkbrk = warning.new(msg: " -PARKING BRK.........ON", colour: "c"),
|
|
var eng1FireGnATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"),
|
|
var eng1FireGncrew = warning.new(msg: " -CABIN CREW.......ALERT", colour: "c"),
|
|
var eng1FireGnmaster = warning.new(msg: " -ENG MASTER 1.......OFF", colour: "c"),
|
|
var eng1FireGnPB = warning.new(msg: " -ENG 1 FIRE P/B....PUSH", colour: "c"),
|
|
var eng1FireGnAgent1 = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"),
|
|
var eng1FireGnAgent2 = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"),
|
|
var eng1FireGnEvac = warning.new(msg: " -EMER EVAC PROC...APPLY", colour: "c"),
|
|
|
|
# ENG 2 FIRE (flight)
|
|
var eng2Fire = warning.new(msg: "ENG 2 FIRE", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "enginePage"),
|
|
var eng2FireFllever = warning.new(msg: " -THR LEVER 2.......IDLE", colour: "c"),
|
|
var eng2FireFlmaster = warning.new(msg: " -ENG MASTER 2.......OFF", colour: "c"),
|
|
var eng2FireFlPB = warning.new(msg: " -ENG 2 FIRE P/B....PUSH", colour: "c"),
|
|
var eng2FireFlAgent1Timer = warning.new(msg: " -AGENT 1 AFT 10 S.DISCH", colour: "w"),
|
|
var eng2FireFlAgent1 = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"),
|
|
var eng2FireFlATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"),
|
|
var eng2FireFl30Sec = warning.new(msg: " .IF FIRE AFTER 30 S:", colour: "w"),
|
|
var eng2FireFlAgent2 = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"),
|
|
|
|
# ENG 2 FIRE (ground)
|
|
var eng2FireGnlever = warning.new(msg: " -THR LEVERS........IDLE", colour: "c"),
|
|
var eng2FireGnstopped = warning.new(msg: " .WHEN A/C IS STOPPED:", colour: "w"),
|
|
var eng2FireGnparkbrk = warning.new(msg: " -PARKING BRK.........ON", colour: "c"),
|
|
var eng2FireGnATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"),
|
|
var eng2FireGncrew = warning.new(msg: " -CABIN CREW.......ALERT", colour: "c"),
|
|
var eng2FireGnmaster = warning.new(msg: " -ENG MASTER 2.......OFF", colour: "c"),
|
|
var eng2FireGnPB = warning.new(msg: " -ENG 2 FIRE P/B....PUSH", colour: "c"),
|
|
var eng2FireGnAgent1 = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"),
|
|
var eng2FireGnAgent2 = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"),
|
|
var eng2FireGnEvac = warning.new(msg: " -EMER EVAC PROC...APPLY", colour: "c"),
|
|
|
|
# APU FIRE
|
|
var apuFire = warning.new(msg: "APU FIRE ", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "apuPage"),
|
|
var apuFirePB = warning.new(msg: " -APU FIRE P/B......PUSH", colour: "c"),
|
|
var apuFireAgentTimer = warning.new(msg: " -AGENT AFT 10 S...DISCH", colour: "c"),
|
|
var apuFireAgent = warning.new(msg: " -AGENT............DISCH", colour: "c"),
|
|
var apuFireMaster = warning.new(msg: " -MASTER SW..........OFF", colour: "c"),
|
|
|
|
# ADR 1 + 2 + 3 FAULT
|
|
var ADR123Fault = warning.new(msg: "NAV ADR 1+2+3 FAULT ", colour: "r", aural: 0, light: 0, isMainMsg: 1),
|
|
var ADR123FaultAP = warning.new(msg: " -AP+FD..............OFF", colour: "c"),
|
|
var ADR123FaultATHR = warning.new(msg: " -ATHR...............OFF", colour: "c"),
|
|
var ADR123FaultPRBW = warning.new(msg: " -PROBE/WINDOW HEAT...ON", colour: "c"),
|
|
var ADR123FaultBUSSC = warning.new(msg: " -CAPT BKUP SPD/ALT...ON", colour: "c"),
|
|
var ADR123FaultBUSSF = warning.new(msg: " -FO BKUP SPD/ALT.....ON", colour: "c"),
|
|
var ADR123FaultADRPB = warning.new(msg: " -ADR 1+2+3 P/B......OFF", colour: "c"),
|
|
var ADR123FaultSPD = warning.new(msg: " -SPD......FLY THE GREEN", colour: "c"),
|
|
var ADR123FaultAOADISAG = warning.new(msg: " .IF AOA DISAGREE: ", colour: "w"),
|
|
var ADR123FaultBUSSINOP = warning.new(msg: " BKUP SPD/ALT.DO NOT USE", colour: "c"),
|
|
var ADR123FaultSTBY = warning.new(msg: " -STBY INST.MAY BE UNREL", colour: "c"),
|
|
var ADR123FaultPROC = warning.new(msg: " -ALL ADR OFF PROC.APPLY", colour: "c"),
|
|
|
|
# Config
|
|
var slats_config = warning.new(msg: "CONFIG", colour: "r", aural: 0, light: 0),
|
|
var slats_config_1 = warning.new(msg: "SLATS NOT IN T.O. CONFIG", colour: "r", aural: 0, light: 0),
|
|
var flaps_config = warning.new(msg: "CONFIG", colour: "r", aural: 0, light: 0),
|
|
var flaps_config_1 = warning.new(msg: "FLAPS NOT IN T.O. CONFIG", colour: "r", aural: 0, light: 0),
|
|
var spd_brk_config = warning.new(msg: "CONFIG", colour: "r", aural: 0, light: 0, sdPage: "fctlPage"),
|
|
var spd_brk_config_1 = warning.new(msg: "SPD BRK NOT RETRACTED", colour: "r", aural: 0, light: 0),
|
|
var pitch_trim_config = warning.new(msg: "CONFIG PITCH TRIM", colour: "r", aural: 0, light: 0, sdPage: "fctlPage"),
|
|
var pitch_trim_config_1 = warning.new(msg: " NOT IN T.O. RANGE", colour: "r", aural: 0, light: 0),
|
|
var rud_trim_config = warning.new(msg: "CONFIG RUD TRIM", colour: "r", aural: 0, light: 0, sdPage: "fctlPage"),
|
|
var rud_trim_config_1 = warning.new(msg: " NOT IN T.O. RANGE", colour: "r", aural: 0, light: 0),
|
|
var park_brk_config = warning.new(msg: "CONFIG PARK BRK ON", colour: "r", aural: 0, light: 0),
|
|
var l_sidestick_fault = warning.new(msg: "CONFIG L SIDESTICK FAULT", colour: "r", aural: 0, light: 0, isMainMsg: 1),
|
|
var l_sidestick_fault_to = warning.new(msg: " (BY TAKE OVER)", colour: "r"),
|
|
var l_sidestick_fault_pb = warning.new(msg: " -L TAKE OVER....DEPRESS", colour: "c"),
|
|
var r_sidestick_fault = warning.new(msg: "CONFIG R SIDESTICK FAULT", colour: "r", aural: 0, light: 0, isMainMsg: 1),
|
|
var r_sidestick_fault_to = warning.new(msg: " (BY TAKE OVER)", colour: "r"),
|
|
var r_sidestick_fault_pb = warning.new(msg: " -R TAKE OVER....DEPRESS", colour: "c"),
|
|
|
|
|
|
# EXCESS CAB ALT
|
|
var excessCabAlt = warning.new(msg: "CAB PR EXCESS CAB ALT", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "cabPressPage"),
|
|
var excessCabAltMask = warning.new(msg: " -CREW OXY MASKS.....USE", colour: "c"),
|
|
var excessCabAltSigns = warning.new(msg: " -SIGNS...............ON", colour: "c"),
|
|
var excessCabAltEmerD = warning.new(msg: " .EMER DESCENT:", colour: "w"),
|
|
var excessCabAltDES = warning.new(msg: " -DESCENT.......INITIATE", colour: "c"),
|
|
var excessCabAltTHRLVR = warning.new(msg: " -THR LEVERS........IDLE", colour: "c"),
|
|
var excessCabAltSPDBRK = warning.new(msg: " -SPD BRK...........FULL", colour: "c"),
|
|
var excessCabAltSPD = warning.new(msg: " SPD.....MAX/APPROPRIATE", colour: "c"),
|
|
var excessCabAltENG = warning.new(msg: " -ENG MODE...........IGN", colour: "c"),
|
|
var excessCabAltATC = warning.new(msg: " -ATC.............NOTIFY", colour: "c"),
|
|
var excessCabAltCAB = warning.new(msg: " -CABIN CREW......ADVISE", colour: "c"),
|
|
var excessCabAltPA = warning.new(msg: " -EMER DES (PA).ANNOUNCE", colour: "c"),
|
|
var excessCabAltXPDR = warning.new(msg: " -XPDR 7700.....CONSIDER", colour: "c"),
|
|
var excessCabAltMEA = warning.new(msg: " MAX FL.....100/MEA-MORA", colour: "c"),
|
|
var excessCabAltCabAlt = warning.new(msg: " .IF CAB ALT>14000 FT:", colour: "w"),
|
|
var excessCabAltMasks = warning.new(msg: " -PAX OXY MASKS...MAN ON", colour: "c"),
|
|
|
|
# ENG 1 OIL LO PR
|
|
var eng1OilLoPr = warning.new(msg: "ENG 1 OIL LO PR ", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "enginePage"),
|
|
var eng1OilLoPrIf = warning.new(msg: " .IF OIL PR < 13 PSI :", colour: "w"),
|
|
var eng1OilLoPrIf2 = warning.new(msg: " .IF OIL PR < 60 PSI :", colour: "w"),
|
|
var eng1OilLoPrThrot = warning.new(msg: " -THR LEVER 1.......IDLE", colour: "c"),
|
|
var eng1OilLoPrMaster = warning.new(msg: " -ENG MASTER 1.......OFF", colour: "c"),
|
|
|
|
# ENG 2 OIL LO PR
|
|
var eng2OilLoPr = warning.new(msg: "ENG 2 OIL LO PR ", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "enginePage"),
|
|
var eng2OilLoPrIf = warning.new(msg: " .IF OIL PR < 13 PSI :", colour: "w"),
|
|
var eng2OilLoPrIf2 = warning.new(msg: " .IF OIL PR < 60 PSI :", colour: "w"),
|
|
var eng2OilLoPrThrot = warning.new(msg: " -THR LEVER 2.......IDLE", colour: "c"),
|
|
var eng2OilLoPrMaster = warning.new(msg: " -ENG MASTER 2.......OFF", colour: "c"),
|
|
|
|
# FCTL L+R ELEV FAULT
|
|
var lrElevFault = warning.new(msg: "F/CTL L+R ELEV FAULT", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "fctlPage"),
|
|
var lrElevFaultSpeed = warning.new(msg: " MAX SPEED.......320/.77", colour: "c"),
|
|
var lrElevFaultTrim = warning.new(msg: " -MAN PITCH TRIM.....USE", colour: "c"),
|
|
var lrElevFaultSpdBrk = warning.new(msg: " SPD BRK......DO NOT USE", colour: "c"),
|
|
|
|
# Gear not down
|
|
var gearNotDown = warning.new(msg: "L/G GEAR NOT DOWN", colour: "r", aural: 0, light: 0, isMainMsg: 1),
|
|
|
|
var gearNotDownLocked = warning.new(msg: "L/G GEAR NOT DOWNLOCKED", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "wheelPage"),
|
|
var gearNotDownLockedRec = warning.new(msg: " -L/G LEVER......RECYCLE", colour: "c"),
|
|
var gearNotDownLockedWork = warning.new(msg: " .IF UNSUCCESSFUL:", colour: "w"),
|
|
var gearNotDownLocked120 = warning.new(msg: " AFTER 120S:", colour: "w"),
|
|
var gearNotDownLockedGrav = warning.new(msg: " -L/G.........GRVTY EXTN", colour: "c"),
|
|
|
|
# Autopilot off involuntary
|
|
var ap_offw = warning.new(msg: "AUTO FLT AP OFF", colour: "r", light: 0, isMainMsg: 1),
|
|
|
|
# Cargo smoke
|
|
var cargoSmokeFwd = warning.new(msg: "SMOKE FWD CARGO SMOKE", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "condPage"),
|
|
var cargoSmokeFwdFans = warning.new(msg: " -CAB FANS...........OFF", colour: "c"),
|
|
var cargoSmokeFwdGrdClsd = warning.new(msg: " .IF FWD CRG CLSD:", colour: "w"),
|
|
var cargoSmokeFwdAgent = warning.new(msg: " -AGENT............DISCH", colour: "c"),
|
|
var cargoSmokeFwdGrd = warning.new(msg: " .WHEN ON GROUND", colour: "w"),
|
|
var cargoSmokeFwdDoors = warning.new(msg: " BEFORE OPEN CRG DOORS:", colour: "w"),
|
|
var cargoSmokeFwdDisemb = warning.new(msg: " -PAX..........DISEMBARK", colour: "c"),
|
|
var cargoSmokeAft = warning.new(msg: "SMOKE AFT CARGO SMOKE", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "condPage"),
|
|
var cargoSmokeAftFans = warning.new(msg: " -CAB FANS...........OFF", colour: "c"),
|
|
var cargoSmokeAftGrdClsd = warning.new(msg: " .IF AFT CRG CLSD:", colour: "w"),
|
|
var cargoSmokeAftAgent = warning.new(msg: " -AGENT............DISCH", colour: "c"),
|
|
var cargoSmokeAftGrd = warning.new(msg: " .WHEN ON GROUND", colour: "w"),
|
|
var cargoSmokeAftDoors = warning.new(msg: " BEFORE OPEN CRG DOORS:", colour: "w"),
|
|
var cargoSmokeAftDisemb = warning.new(msg: " -PAX..........DISEMBARK", colour: "c"),
|
|
|
|
# Lavatory SMOKE
|
|
var lavatorySmoke = warning.new(msg: "SMOKE LAVATORY SMOKE ", colour: "r", aural: 0, light: 0, isMainMsg: 1),
|
|
var lavatorySmokeComm = warning.new(msg: " -CKPT/CAB COM.ESTABLISH ", colour: "c"),
|
|
|
|
# EXCES RESID PR
|
|
var excessResidPress = warning.new(msg: "CAB PR EXCES RESIDUAL PR ", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "cabPressPage"),
|
|
var excessResidPressPack1 = warning.new(msg: " -PACK 1.............OFF", colour: "c"),
|
|
var excessResidPressPack2 = warning.new(msg: " -PACK 2.............OFF", colour: "c"),
|
|
var excessResidPressCabCr = warning.new(msg: " -CABIN CREW.......ALERT", colour: "c"),
|
|
|
|
# ESS Bus on Bat
|
|
# NEW EMER CONFIG
|
|
var essBusOnBat = warning.new(msg: "ELEC ESS BUSES ON BAT", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "elecPage"),
|
|
var essBusOnBatMinSpeed = warning.new(msg: " MIN RAT SPD......140 KT", colour: "c"),
|
|
|
|
# Emer Config
|
|
var emerconfig = warning.new(msg: "ELEC EMER CONFIG", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "elecPage"),
|
|
var emerconfigMinRat = warning.new(msg: " MIN RAT SPD......140 KT", colour: "c"),
|
|
var emerconfigGen = warning.new(msg: " -GEN 1+2....OFF THEN ON", colour: "c"),
|
|
var emerconfigGen2 = warning.new(msg: " .IF UNSUCCESSFUL :", colour: "w"),
|
|
var emerconfigBusTie = warning.new(msg: " -BUS TIE............OFF", colour: "c"),
|
|
var emerconfigGen3 = warning.new(msg: " -GEN 1+2....OFF THEN ON", colour: "c"),
|
|
var emerconfigManOn = warning.new(msg: " -EMER ELEC PWR...MAN ON", colour: "c"),
|
|
var emerconfigEngMode = warning.new(msg: " -ENG MODE SEL.......IGN", colour: "c"),
|
|
var emerconfigRadio = warning.new(msg: " -VHF1/ATC1..........USE", colour: "c"),
|
|
var emerconfigFuelG = warning.new(msg: " FUEL GRVTY FEED", colour: "c"),
|
|
var emerconfigFuelG2 = warning.new(msg: " PROC:GRVTY FUEL FEEDING", colour: "c"),
|
|
var emerconfigFAC = warning.new(msg: " -FAC 1......OFF THEN ON", colour: "c"),
|
|
var emerconfigBusTie2 = warning.new(msg: " -BUS TIE...........AUTO", colour: "c"),
|
|
var emerconfigAPU = warning.new(msg: " -APU (IF AVAIL)...START", colour: "c"),
|
|
var emerconfigVent = warning.new(msg: " -BLOWER + EXTRACT..OVRD", colour: "c"),
|
|
var emerconfigFuelIN = warning.new(msg: " FUEL CONSUMPT INCRSD", colour: "c"),
|
|
var emerconfigFMSPRD = warning.new(msg: " FMS PRED UNRELIABLE", colour: "c"),
|
|
|
|
# B + Y LO PR
|
|
var hydBYloPr = warning.new(msg: "HYD B+Y SYS LO PR", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "hydraulicPage"),
|
|
var hydBYloPrRat = warning.new(msg: " MIN RAT SPD......140 KT", colour: "c"),
|
|
var hydBYloPrYElec = warning.new(msg: " -YELLOW ELEC PUMP....ON", colour: "c"),
|
|
var hydBYloPrRatOn = warning.new(msg: " -RAT.............MAN ON", colour: "c"),
|
|
var hydBYloPrBElec = warning.new(msg: " -BLUE ELEC PUMP.....OFF", colour: "c"),
|
|
var hydBYloPrYEng = warning.new(msg: " -YELLOW ENG 2 PUMP..OFF", colour: "c"),
|
|
var hydBYloPrMaxSpd = warning.new(msg: " MAX SPEED.......320/.77", colour: "c"),
|
|
var hydBYloPrMnvrCare = warning.new(msg: " MANEUVER WITH CARE", colour: "c"),
|
|
var hydBYloPrGaPitch = warning.new(msg: " FOR GA:MAX PITCH 15 DEG", colour: "c"),
|
|
var hydBYloPrFuelCnsmpt = warning.new(msg: " FUEL CONSUMPT INCRSD", colour: "c"),
|
|
var hydBYloPrFmsPredict = warning.new(msg: " FMS PRED UNRELIABLE", colour: "c"),
|
|
|
|
# G + B LO PR
|
|
var hydGBloPr = warning.new(msg: "HYD G+B SYS LO PR", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "hydraulicPage"),
|
|
var hydGBloPrRat = warning.new(msg: " MIN RAT SPD......140 KT", colour: "c"),
|
|
var hydGBloPrRatOn = warning.new(msg: " -RAT.............MAN ON", colour: "c"),
|
|
var hydGBloPrBElec = warning.new(msg: " -BLUE ELEC PUMP.....OFF", colour: "c"),
|
|
var hydGBloPrGEng = warning.new(msg: " -GREEN ENG 1 PUMP...OFF", colour: "c"),
|
|
var hydGBloPrMnvrCare = warning.new(msg: " MANEUVER WITH CARE", colour: "c"),
|
|
var hydGBloPrGaPitch = warning.new(msg: " FOR GA:MAX PITCH 15 DEG", colour: "c"),
|
|
var hydGBloPrFuelCnsmpt = warning.new(msg: " FUEL CONSUMPT INCRSD", colour: "c"),
|
|
var hydGBloPrFmsPredict = warning.new(msg: " FMS PRED UNRELIABLE", colour: "c"),
|
|
|
|
# G + Y LO PR
|
|
var hydGYloPr = warning.new(msg: "HYD G+Y SYS LO PR", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "hydraulicPage"),
|
|
var hydGYloPrPtu = warning.new(msg: " -PTU................OFF", colour: "c"),
|
|
var hydGYloPrGEng = warning.new(msg: " -GREEN ENG 1 PUMP...OFF", colour: "c"),
|
|
var hydGYloPrYEng = warning.new(msg: " -YELLOW ENG 2 PUMP..OFF", colour: "c"),
|
|
var hydGYloPrYElec = warning.new(msg: " -YELLOW ELEC PUMP....ON", colour: "c"),
|
|
var hydGYloPrMnvrCare = warning.new(msg: " MANEUVER WITH CARE", colour: "c"),
|
|
var hydGYloPrFuelCnsmpt = warning.new(msg: " FUEL CONSUMPT INCRSD", colour: "c"),
|
|
var hydGYloPrFmsPredict = warning.new(msg: " FMS PRED UNRELIABLE", colour: "c"),
|
|
|
|
# AIR BLEED LEAK
|
|
var airBleedLeak = warning.new(msg: "AIR BLEED LEAK ", colour: "r", aural: 0, light: 0, isMainMsg: 1, sdPage: "bleedPage"),
|
|
var airBleedLeakShut = warning.new(msg: " -X BLEED..........SHUT", colour: "c"),
|
|
|
|
# LEVEL 2 WARN
|
|
# THR LEVERS NOT SET
|
|
var engThrustLvrNotSet = warning.new(msg: "ENG THR LEVERS NOT SET ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var engThrustLvrNotSetMCT = warning.new(msg: " -THR LEVERS ....MCT/FLX", colour: "c"),
|
|
var engThrustLvrNotSetTO = warning.new(msg: " -THR LEVERS.......TO/GA", colour: "c"),
|
|
|
|
# REV SET
|
|
var engRevSet = warning.new(msg: "ENG REV SET ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var engRevSetLevers = warning.new(msg: " -THR LEVER......FWD THR", colour: "c"),
|
|
|
|
# ENG 1 FAIL
|
|
var eng1Fail = warning.new(msg: "ENG 1 FAIL ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var thrustMalfunction1 = warning.new(msg: " THRUST MALFUNCTION ", colour: "a"),
|
|
var shaftFailure1 = warning.new(msg: " SHAFT FAILURE ", colour: "a"),
|
|
var eng1FailModeSel = warning.new(msg: " -ENG MODE SEL.......IGN", colour: "c"),
|
|
var eng1FailThrLvrIdle = warning.new(msg: " -THR LEVER 1.......IDLE", colour: "c"),
|
|
var eng1FailNoRelight = warning.new(msg: ".IF NO RELIGHT AFTER 30S", colour: "w"),
|
|
var eng1FailMasterOff = warning.new(msg: " -ENG MASTER 1.......OFF", colour: "c"),
|
|
var eng1FailDamage = warning.new(msg: " IF DAMAGE : ", colour: "w"),
|
|
var eng1FailFirePB = warning.new(msg: " -ENG 1 FIRE P/B....PUSH", colour: "c"),
|
|
var eng1FailAgent1DischT = warning.new(msg: " -AGENT1 AFTER 10S.DISCH", colour: "c"),
|
|
var eng1FailAgent1Disch = warning.new(msg: " -AGENT 1..........DISCH", colour: "c"),
|
|
var eng1FailNoDamage = warning.new(msg: " IF NO DAMAGE : ", colour: "w"),
|
|
var eng1FailRelight = warning.new(msg: " -ENG 1 RELIGHT.CONSIDER", colour: "c"),
|
|
|
|
# ENG 1 OIL HI TEMP
|
|
var eng1OilHiTemp = warning.new(msg: "ENG 1 OIL HI TEMP ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng1OilHiTempIdle = warning.new(msg: " -THR LEVER 1.......IDLE", colour: "c"),
|
|
var eng1OilHiTempSuccess = warning.new(msg: " .IF UNSUCCESSFUL: ", colour: "w"),
|
|
var eng1OilHiTempMaster = warning.new(msg: " -ENG MASTER 1.......OFF", colour: "c"),
|
|
|
|
# ENG 1 SHUT DOWN
|
|
var eng1ShutDown = warning.new(msg: "ENG 1 SHUT DOWN ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng1ShutDownPack = warning.new(msg: " -PACK 1.............OFF", colour: "c"),
|
|
var eng1ShutDownXBleed = warning.new(msg: " -X BLEED...........OPEN", colour: "c"),
|
|
var eng1ShutDownModeSel = warning.new(msg: " -ENG MODE SEL.......IGN", colour: "c"),
|
|
var eng1ShutDownFuelLeak = warning.new(msg: " .IF NO FUEL LEAK :", colour: "w"),
|
|
var eng1ShutDownImbalance = warning.new(msg: " -IMBALANCE......MONITOR", colour: "c"),
|
|
var eng1ShutDownTCAS = warning.new(msg: " -TCAS MODE SEL.......TA", colour: "c"),
|
|
var eng1ShutDownBuffet = warning.new(msg: " .IF BUFFET : ", colour: "w"),
|
|
var eng1ShutDownSpeed = warning.new(msg: " MAX SPEED...........240", colour: "c"),
|
|
var eng1ShutDownXBleedS = warning.new(msg: " -X BLEED...........SHUT", colour: "c"),
|
|
var eng1ShutDownWingAI = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"),
|
|
var eng1ShutDownIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
|
|
# ENG 2 FAIL
|
|
var eng2Fail = warning.new(msg: "ENG 2 FAIL ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var thrustMalfunction2 = warning.new(msg: " THRUST MALFUNCTION ", colour: "a"),
|
|
var shaftFailure2 = warning.new(msg: " SHAFT FAILURE ", colour: "a"),
|
|
var eng2FailModeSel = warning.new(msg: " -ENG MODE SEL.......IGN", colour: "c"),
|
|
var eng2FailThrLvrIdle = warning.new(msg: " -THR LEVER 2.......IDLE", colour: "c"),
|
|
var eng2FailNoRelight = warning.new(msg: ".IF NO RELIGHT AFTER 30S", colour: "w"),
|
|
var eng2FailMasterOff = warning.new(msg: " -ENG MASTER 2.......OFF", colour: "c"),
|
|
var eng2FailDamage = warning.new(msg: " IF DAMAGE : ", colour: "w"),
|
|
var eng2FailFirePB = warning.new(msg: " -ENG 2 FIRE P/B....PUSH", colour: "c"),
|
|
var eng2FailAgent1DischT = warning.new(msg: " -AGENT2 AFTER 10S.DISCH", colour: "c"),
|
|
var eng2FailAgent1Disch = warning.new(msg: " -AGENT 2..........DISCH", colour: "c"),
|
|
var eng2FailNoDamage = warning.new(msg: " IF NO DAMAGE : ", colour: "w"),
|
|
var eng2FailRelight = warning.new(msg: " -ENG 2 RELIGHT.CONSIDER", colour: "c"),
|
|
|
|
# ENG 2 OIL HI TEMP
|
|
var eng2OilHiTemp = warning.new(msg: "ENG 2 OIL HI TEMP ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng2OilHiTempIdle = warning.new(msg: " -THR LEVER 2.......IDLE", colour: "c"),
|
|
var eng2OilHiTempSuccess = warning.new(msg: " .IF UNSUCCESSFUL: ", colour: "w"),
|
|
var eng2OilHiTempMaster = warning.new(msg: " -ENG MASTER 2.......OFF", colour: "c"),
|
|
|
|
# ENG 2 SHUT DOWN
|
|
var eng2ShutDown = warning.new(msg: "ENG 2 SHUT DOWN ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng2ShutDownPack1 = warning.new(msg: " -PACK 1.............OFF", colour: "c"),
|
|
var eng2ShutDownPack = warning.new(msg: " -PACK 2.............OFF", colour: "c"),
|
|
var eng2ShutDownXBleed = warning.new(msg: " -X BLEED...........OPEN", colour: "c"),
|
|
var eng2ShutDownModeSel = warning.new(msg: " -ENG MODE SEL.......IGN", colour: "c"),
|
|
var eng2ShutDownFuelLeak = warning.new(msg: " .IF NO FUEL LEAK :", colour: "w"),
|
|
var eng2ShutDownImbalance = warning.new(msg: " -IMBALANCE......MONITOR", colour: "c"),
|
|
var eng2ShutDownTCAS = warning.new(msg: " -TCAS MODE SEL.......TA", colour: "c"),
|
|
var eng2ShutDownBuffet = warning.new(msg: " .IF BUFFET : ", colour: "w"),
|
|
var eng2ShutDownSpeed = warning.new(msg: " MAX SPEED...........240", colour: "c"),
|
|
var eng2ShutDownXBleedS = warning.new(msg: " -X BLEED...........SHUT", colour: "c"),
|
|
var eng2ShutDownWingAI = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"),
|
|
var eng2ShutDownIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
|
|
# SAT ABOVE FLEX TEMP
|
|
var satAbvFlexTemp = warning.new(msg: "ENG SAT ABOVE FLEX TEMP", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var satAbvFlexTempCheck = warning.new(msg: " -T.O DATA.........CHECK", colour: "c"),
|
|
|
|
# B RSVR LO LVL
|
|
var hydBSysLoLvl = warning.new(msg: "HYD B RSVR LO LVL ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var hydBSysLoLvlPump = warning.new(msg: " -BLUE ELEC PUMP.....OFF ", colour: "c"),
|
|
|
|
# G RSVR LO LVL
|
|
var hydGSysLoLvl = warning.new(msg: "HYD G RSVR LO LVL ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var hydGSysLoLvlPtu = warning.new(msg: " -PTU................OFF ", colour: "c"),
|
|
var hydGSysLoLvlPump = warning.new(msg: " -GREEN ENG 1 PUMP...OFF ", colour: "c"),
|
|
|
|
# Y RSVR LO LVL
|
|
var hydYSysLoLvl = warning.new(msg: "HYD Y RSVR LO LVL ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var hydYSysLoLvlPtu = warning.new(msg: " -PTU................OFF ", colour: "c"),
|
|
var hydYSysLoLvlPump = warning.new(msg: " -YELLOW ENG 2 PUMP..OFF ", colour: "c"),
|
|
var hydYSysLoLvlElec = warning.new(msg: " -YELLOW ELEC PUMP...OFF ", colour: "c"),
|
|
|
|
# B SYS LO PR
|
|
var hydBSysLoPr = warning.new(msg: "HYD B SYS LO PR ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var hydBSysLoPrFuel = warning.new(msg: " FUEL CONSUMPT INCRSD ", colour: "c"),
|
|
var hydBSysLoPrFmsPred = warning.new(msg: " FMS PRED UNRELIABLE ", colour: "c"),
|
|
|
|
# G SYS LO PR
|
|
var hydGSysLoPr = warning.new(msg: "HYD G SYS LO PR ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var hydGSysLoPrFuel = warning.new(msg: " FUEL CONSUMPT INCRSD ", colour: "c"),
|
|
var hydGSysLoPrFmsPred = warning.new(msg: " FMS PRED UNRELIABLE ", colour: "c"),
|
|
var hydGSysLoPrEngPump = warning.new(msg: " G ENG 1 PUMP LO PR ", colour: "a"),
|
|
|
|
# Y SYS LO PR
|
|
var hydYSysLoPr = warning.new(msg: "HYD Y SYS LO PR ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var hydYSysLoPrAccu = warning.new(msg: " BRK Y ACCU PR MONITOR ", colour: "c"),
|
|
var hydYSysLoPrFuel = warning.new(msg: " FUEL CONSUMPT INCRSD ", colour: "c"),
|
|
var hydYSysLoPrFmsPred = warning.new(msg: " FMS PRED UNRELIABLE ", colour: "c"),
|
|
var hydYSysLoPrEngPump = warning.new(msg: " Y ENG 2 PUMP LO PR ", colour: "a"),
|
|
|
|
# DC EMER CONFIG
|
|
var dcEmerconfig = warning.new(msg: "ELEC DC EMER CONFIG", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var dcEmerconfigManOn = warning.new(msg: " -EMER ELEC PWR...MAN ON", colour: "c"),
|
|
var dcEmerconfigFuel = warning.new(msg: " FUEL CONSUMPT INCRSD", colour: "c"),
|
|
|
|
# DC BUS 1 OR 2 FAULT
|
|
var dcBus12Fault = warning.new(msg: "ELEC DC BUS 1+2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var dcBus12FaultBlower = warning.new(msg: " -BLOWER............OVRD", colour: "c"),
|
|
var dcBus12FaultExtract = warning.new(msg: " -EXTRACT...........OVRD", colour: "c"),
|
|
var dcBus12FaultBaroRef = warning.new(msg: " -BARO REF.........CHECK", colour: "c"),
|
|
var dcBus12FaultFuel = warning.new(msg: " FUEL CONSUMPT INCRSD", colour: "c"),
|
|
var dcBus12FaultPredict = warning.new(msg: " FMS PRED UNRELIABLE", colour: "c"),
|
|
var dcBus12FaultIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
var dcBus12FaultBrking = warning.new(msg: " MAX BRK........1000 PSI", colour: "c"),
|
|
|
|
# AC ESS BUS FAULT
|
|
var AcBusEssFault = warning.new(msg: "ELEC AC ESS BUS FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var AcBusEssFaultFeed = warning.new(msg: " -AC ESS FEED.......ALTN", colour: "c"),
|
|
var AcBusEssFaultAtc = warning.new(msg: " -ATC..............SYS 2", colour: "c"),
|
|
|
|
# AC BUS 1 FAULT
|
|
var AcBus1Fault = warning.new(msg: "ELEC AC BUS 1 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var AcBus1FaultBlower = warning.new(msg: " -BLOWER............OVRD", colour: "c"),
|
|
|
|
# DC ESS BUS FAULT
|
|
var DcEssBusFault = warning.new(msg: "ELEC DC ESS BUS FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var DcEssBusFaultRadio = warning.new(msg: " -VHF 2 OR 3.........USE", colour: "c"),
|
|
var DcEssBusFaultRadio2 = warning.new(msg: " -AUDIO SWTG......SELECT", colour: "c"),
|
|
var DcEssBusFaultBaro = warning.new(msg: " -BARO REF.........CHECK", colour: "c"),
|
|
var DcEssBusFaultGear = warning.new(msg: " -L/G.........GRVTY EXTN", colour: "c"),
|
|
var DcEssBusFaultGPWS = warning.new(msg: " -GPWS SYS...........OFF", colour: "c"),
|
|
var DcEssBusFaultFuel = warning.new(msg: " FUEL CONSUMPT INCRSD", colour: "c"),
|
|
var DcEssBusFaultPredict = warning.new(msg: " FMS PRED UNRELIABLE", colour: "c"),
|
|
var DcEssBusFaultIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
|
|
# AC BUS 2 FAULT
|
|
var AcBus2Fault = warning.new(msg: "ELEC AC BUS 2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var AcBus2FaultExtract = warning.new(msg: " -EXTRACT...........OVRD", colour: "c"),
|
|
var AcBus2FaultAtc = warning.new(msg: " -ATC..............SYS 1", colour: "c"),
|
|
|
|
# DC BUS 1 FAULT
|
|
var dcBus1Fault = warning.new(msg: "ELEC DC BUS 1 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var dcBus1FaultBlower = warning.new(msg: " -BLOWER............OVRD", colour: "c"),
|
|
var dcBus1FaultExtract = warning.new(msg: " -EXTRACT...........OVRD", colour: "c"),
|
|
var dcBus1FaultIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
|
|
# DC BUS 2 FAULT
|
|
var dcBus2Fault = warning.new(msg: "ELEC DC BUS 2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var dcBus2FaultAirData = warning.new(msg: " -AIR DATA SWTG......F/O", colour: "c"),
|
|
var dcBus2FaultBaro = warning.new(msg: " -BARO REF.........CHECK", colour: "c"),
|
|
var dcBus2FaultGear = warning.new(msg: " -L/G.........GRVTY EXTN", colour: "c"),
|
|
var dcBus2FaultFuel = warning.new(msg: " FUEL CONSUMPT INCRSD", colour: "c"),
|
|
var dcBus2FaultPredict = warning.new(msg: " FMS PRED UNRELIABLE", colour: "c"),
|
|
|
|
# DC BAT BUS FAULT
|
|
var dcBusBatFault = warning.new(msg: "ELEC DC BAT BUS FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
|
|
# DC ESS BUS SHED
|
|
var dcBusEssShed = warning.new(msg: "ELEC DC ESS BUS SHED", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var dcBusEssShedExtract = warning.new(msg: " -EXTRACT...........OVRD", colour: "c"),
|
|
var dcBusEssShedIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
|
|
# AC ESS BUS SHED
|
|
var acBusEssShed = warning.new(msg: "ELEC AC ESS BUS SHED", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var acBusEssShedAtc = warning.new(msg: " -ATC..............SYS 2", colour: "c"),
|
|
|
|
# IDG 1 DISCONNECTED
|
|
var idg1Disc = warning.new(msg: "ELEC IDG 1 DISCONNECTED", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
|
|
# IDG 2 DISCONNECTED
|
|
var idg2Disc = warning.new(msg: "ELEC IDG 2 DISCONNECTED", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
|
|
# GEN 1 FAULT
|
|
var gen1fault = warning.new(msg: "ELEC GEN 1 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var gen1faultGen = warning.new(msg: " -GEN 1......OFF THEN ON", colour: "c"),
|
|
var gen1faultGen2 = warning.new(msg: " .IF UNSUCCESSFUL :", colour: "w"),
|
|
var gen1faultGen3 = warning.new(msg: " -GEN 1..............OFF", colour: "c"),
|
|
|
|
# ESS TR FAULT
|
|
var essTRFault = warning.new(msg: "ELEC ESS TR FAULT ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
|
|
# GEN 2 FAULT
|
|
var gen2fault = warning.new(msg: "ELEC GEN 2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var gen2faultGen = warning.new(msg: " -GEN 2......OFF THEN ON", colour: "c"),
|
|
var gen2faultGen2 = warning.new(msg: " .IF UNSUCCESSFUL :", colour: "w"),
|
|
var gen2faultGen3 = warning.new(msg: " -GEN 2..............OFF", colour: "c"),
|
|
|
|
# APU GEN FAULT
|
|
var apuGenfault = warning.new(msg: "ELEC APU GEN FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var apuGenfaultGen = warning.new(msg: " -APU GEN....OFF THEN ON", colour: "c"),
|
|
var apuGenfaultGen2 = warning.new(msg: " .IF UNSUCCESSFUL :", colour: "w"),
|
|
var apuGenfaultGen3 = warning.new(msg: " -APU GEN............OFF", colour: "c"),
|
|
|
|
# GEN OFF
|
|
var gen1Off = warning.new(msg: "ELEC GEN 1 OFF ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var gen2Off = warning.new(msg: "ELEC GEN 2 OFF ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
|
|
# APU GEN FAULT
|
|
var acEssBusAltn = warning.new(msg: "ELEC AC ESS BUS ALTN", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
|
|
# L ELEV FAULT
|
|
var lElevFault = warning.new(msg: "F/CTL L ELEV FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var lElevFaultCare = warning.new(msg: " MANEUVER WITH CARE", colour: "c"),
|
|
var lElevFaultPitch = warning.new(msg: " FOR GA:MAX PITCH 15 DEG", colour: "c"),
|
|
|
|
# R ELEV FAULT
|
|
var rElevFault = warning.new(msg: "F/CTL R ELEV FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var rElevFaultCare = warning.new(msg: " MANEUVER WITH CARE", colour: "c"),
|
|
var rElevFaultPitch = warning.new(msg: " FOR GA:MAX PITCH 15 DEG", colour: "c"),
|
|
|
|
# F/CTL SPD BRK STILL OUT
|
|
var fctlSpdBrkStillOut = warning.new(msg: "F/CTL SPD BRK STILL OUT ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var fctlPitchTrimDisag = warning.new(msg: "F/CTL", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var fctlPitchTrimDisag2 = warning.new(msg: "PITCH TRIM/MCDU/CG DISAGREE", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var fctlFlapsDisag = warning.new(msg: "F/CTL FLAPS/MCDU DISAGREE", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var toSpdsDisag = warning.new(msg: "T.O V1/VR/V2 DISAGREE ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var toSpdsTooLow = warning.new(msg: "T.O SPEEDS TOO LOW ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var toSpdsNotInserted = warning.new(msg: "T.O SPEEDS NOT INSERTED ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
|
|
# DIRECT LAW
|
|
var directLaw = warning.new(msg: "F/CTL DIRECT LAW", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var directLawProt = warning.new(msg: " (PROT LOST)", colour: "a"),
|
|
var directLawMaxSpeed = warning.new(msg: " MAX SPEED........320/.77", colour: "c"),
|
|
var directLawTrim = warning.new(msg: " -MAN PITCH TRIM.....USE", colour: "c"),
|
|
var directLawCare = warning.new(msg: " MANEUVER WITH CARE", colour: "c"),
|
|
var directLawSpdBrk = warning.new(msg: " USE SPD BRK WITH CARE", colour: "c"),
|
|
var directLawSpdBrk2 = warning.new(msg: " SPD BRK.......DO NOT USE", colour: "c"),
|
|
|
|
# ALTN LAW
|
|
var altnLaw = warning.new(msg: "F/CTL ALTN LAW", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var altnLawProt = warning.new(msg: " (PROT LOST)", colour: "a"),
|
|
var altnLawMaxSpeed = warning.new(msg: " MAX SPEED........320 KT", colour: "c"),
|
|
var altnLawMaxSpeed2 = warning.new(msg: " MAX SPEED........320/.77", colour: "c"),
|
|
var altnLawCare = warning.new(msg: " MANEUVER WITH CARE", colour: "c"),
|
|
var altnLawMaxSpdBrk = warning.new(msg: " SPD BRK.......DO NOT USE", colour: "c"),
|
|
|
|
# Autothrust
|
|
var athr_offw = warning.new(msg: "AUTO FLT A/THR OFF", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var athr_offw_1 = warning.new(msg: " -THR LEVERS........MOVE", colour: "c"),
|
|
var athr_lock = warning.new(msg: "ENG THRUST LOCKED", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var athr_lock_1 = warning.new(msg: " -THR LEVERS........MOVE", colour: "c"),
|
|
var athr_lim = warning.new(msg: "AUTO FLT A/THR LIMITED", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var athr_lim_1 = warning.new(msg: " -THR LEVERS........MOVE", colour: "c"),
|
|
|
|
# TCAS FAULT
|
|
var tcasFault = warning.new(msg: "NAV TCAS FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var tcasStby = warning.new(msg: "NAV TCAS STBY", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var gpwsFault = warning.new(msg: "NAV GPWS FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var gpwsFaultOff = warning.new(msg: " -GPWS...............OFF", colour: "c"),
|
|
var gpwsTerrFault = warning.new(msg: "NAV GPWS TERR DET FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var gpwsTerrFaultOff = warning.new(msg: " -GPWS TERR..........OFF", colour: "c"),
|
|
|
|
# FAC and Rudder System
|
|
var fac12Fault = warning.new(msg: "AUTO FLT FAC 1+2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var fac12FaultRud = warning.new(msg: "RUD WITH CARE ABV 160 KT", colour: "c"),
|
|
var fac12FaultFac = warning.new(msg: " -FAC 1+2....OFF THEN ON", colour: "c"),
|
|
var fac12FaultSuccess = warning.new(msg: " .IF UNSUCCESSFUL :", colour: "w"),
|
|
var fac12FaultFacOff = warning.new(msg: " -FAC 1+2............OFF", colour: "c"),
|
|
var yawDamperSysFault = warning.new(msg: "AUTO FLT YAW DAMPER SYS", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var yawDamperSysFaultFac1 = warning.new(msg: " -FAC 1......OFF THEN ON", colour: "c"),
|
|
var yawDamperSysFaultFac2 = warning.new(msg: " -FAC 2......OFF THEN ON", colour: "c"),
|
|
# var rudderTrimSysFault = warning.new(msg: "AUTO FLT RUD TRIM SYS", colour: "a", aural: 1, light: 1, isMainMsg: 1), not implemented
|
|
# var rudderTrimSysFaultFac = warning.new(msg: " -FAC 1+2....OFF THEN ON", colour: "c"),
|
|
var rudTravLimSysFault = warning.new(msg: "AUTO FLT RUD TRV LIM SYS", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var rudTravLimSysFaultRud = warning.new(msg: "RUD WITH CARE ABV 160 KT", colour: "c"),
|
|
var rudTravLimSysFaultFac = warning.new(msg: " -FAC 1+2....OFF THEN ON", colour: "c"),
|
|
var fac1Fault = warning.new(msg: "AUTO FLT FAC 1 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var fac1FaultFac = warning.new(msg: " -FAC 1......OFF THEN ON", colour: "c"),
|
|
var fac1FaultSuccess = warning.new(msg: " .IF UNSUCCESSFUL :", colour: "w"),
|
|
var fac1FaultFacOff = warning.new(msg: " -FAC 1..............OFF", colour: "c"),
|
|
var fac2Fault = warning.new(msg: "AUTO FLT FAC 2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var fac2FaultFac = warning.new(msg: " -FAC 2......OFF THEN ON", colour: "c"),
|
|
var fac2FaultSuccess = warning.new(msg: " .IF UNSUCCESSFUL :", colour: "w"),
|
|
var fac2FaultFacOff = warning.new(msg: " -FAC 2..............OFF", colour: "c"),
|
|
|
|
# FCU fault
|
|
var fcuFault = warning.new(msg: "AUTO FLT FCU 1+2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var fcuFaultBaro = warning.new(msg: " -PFD BARO REF: STD ONLY", colour: "c"),
|
|
|
|
# FUEL
|
|
var wingLoLvl = warning.new(msg: "FUEL L+R WING TK LO LVL", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var wingLoLvlManMode = warning.new(msg: " -FUEL MODE SEL......MAN", colour: "c"),
|
|
var wingLoLvlPumpL1 = warning.new(msg: " -L TK PUMP 1.........ON", colour: "c"),
|
|
var wingLoLvlPumpL2 = warning.new(msg: " -L TK PUMP 2.........ON", colour: "c"),
|
|
var wingLoLvlPumpC1 = warning.new(msg: " -CTR TK PUMP 1.......ON", colour: "c"),
|
|
var wingLoLvlPumpR1 = warning.new(msg: " -R TK PUMP 1.........ON", colour: "c"),
|
|
var wingLoLvlPumpR2 = warning.new(msg: " -R TK PUMP 2.........ON", colour: "c"),
|
|
var wingLoLvlPumpC2 = warning.new(msg: " -CTR TK PUMP 2.......ON", colour: "c"),
|
|
var wingLoLvlLeak = warning.new(msg: " .IF NO FUEL LEAK: ", colour: "w"),
|
|
var wingLoLvlXFeed = warning.new(msg: " -FUEL X FEED.........ON", colour: "c"),
|
|
var wingLoLvlGrav = warning.new(msg: " .IF GRVTY FEED: ", colour: "w"),
|
|
var wingLoLvlXFeedOff = warning.new(msg: " -FUEL X FEED........OFF", colour: "c"),
|
|
|
|
var ctrPumpsOff = warning.new(msg: "FUEL CTR TK PUMPS OFF ", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var ctrPumpsOffPump1 = warning.new(msg: " -CTR TK PUMP 1.......ON", colour: "c"),
|
|
var ctrPumpsOffPump2 = warning.new(msg: " -CTR TK PUMP 2.......ON", colour: "c"),
|
|
|
|
# APU shutdown
|
|
var apuEmerShutdown = warning.new(msg: "APU EMER SHUT DOWN", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var apuEmerShutdownMast = warning.new(msg: " -MASTER SW..........OFF", colour: "c"),
|
|
var apuAutoShutdown = warning.new(msg: "APU AUTO SHUT DOWN", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var apuAutoShutdownMast = warning.new(msg: " -MASTER SW..........OFF", colour: "c"),
|
|
|
|
# Bleed
|
|
var bleed1Fault = warning.new(msg: "AIR ENG 1 BLEED FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var bleed1FaultOff = warning.new(msg: " -ENG 1 BLEED........OFF", colour: "c"),
|
|
var bleed1FaultPack = warning.new(msg: " -PACK 1.............OFF", colour: "c"),
|
|
var bleed1FaultXBleed = warning.new(msg: " -X BLEED...........OPEN", colour: "c"),
|
|
var bleed2Fault = warning.new(msg: "AIR ENG 2 BLEED FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var bleed2FaultOff = warning.new(msg: " -ENG 2 BLEED........OFF", colour: "c"),
|
|
var bleed2FaultPack = warning.new(msg: " -PACK 2.............OFF", colour: "c"),
|
|
var bleed2FaultXBleed = warning.new(msg: " -X BLEED...........OPEN", colour: "c"),
|
|
var apuBleedFault = warning.new(msg: "AIR APU BLEED FAULT", colour: "a", aural: 1, light: 1),
|
|
var hpValve1Fault = warning.new(msg: "AIR ENG 1 HP VALVE FAULT", colour: "a"),
|
|
var hpValve2Fault = warning.new(msg: "AIR ENG 2 HP VALVE FAULT", colour: "a"),
|
|
var xBleedFault = warning.new(msg: "AIR X BLEED FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var xBleedFaultMan = warning.new(msg: " -X BLEED........MAN CTL", colour: "c"),
|
|
var xBleedFaultWAI = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"),
|
|
var xBleedFaultICE = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
var bleed1Off = warning.new(msg: "AIR BLEED 1 OFF", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var bleed2Off = warning.new(msg: "AIR BLEED 2 OFF", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var engBleedLowTemp = warning.new(msg: "AIR ENG 1+2 BLEED LO TEMP", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var engBleedLowTempAthr = warning.new(msg: " -A/THR..............OFF", colour: "c"),
|
|
var engBleedLowTempAdv = warning.new(msg: " -THR LEVERS.....ADVANCE", colour: "c"),
|
|
var engBleedLowTempSucc = warning.new(msg: " .IF UNSUCCESSFUL :", colour: "c"),
|
|
var engBleedLowTempIce = warning.new(msg: " -WING A.ICE.........OFF", colour: "c"),
|
|
var engBleedLowTempIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
var eng1BleedLowTemp = warning.new(msg: "AIR ENG 1 BLEED LO TEMP", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng1BleedLowTempAthr = warning.new(msg: " -A/THR..............OFF", colour: "c"),
|
|
var eng1BleedLowTempAdv = warning.new(msg: " -THR LEVER 1....ADVANCE", colour: "c"),
|
|
var eng1BleedLowTempSucc = warning.new(msg: " .IF UNSUCCESSFUL :", colour: "c"),
|
|
var eng1BleedLowTempXBld = warning.new(msg: " -X BLEED...........OPEN", colour: "c"),
|
|
var eng1BleedLowTempOff = warning.new(msg: " -ENG 1 BLEED........OFF", colour: "c"),
|
|
var eng1BleedLowTempPack = warning.new(msg: " -PACK 1.............OFF", colour: "c"),
|
|
var eng1BleedLowTempIce = warning.new(msg: " -WING A.ICE.........OFF", colour: "c"),
|
|
var eng1BleedLowTempIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
var eng2BleedLowTemp = warning.new(msg: "AIR ENG 2 BLEED LO TEMP", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng2BleedLowTempAthr = warning.new(msg: " -A/THR..............OFF", colour: "c"),
|
|
var eng2BleedLowTempAdv = warning.new(msg: " -THR LEVER 2....ADVANCE", colour: "c"),
|
|
var eng2BleedLowTempSucc = warning.new(msg: " .IF UNSUCCESSFUL :", colour: "c"),
|
|
var eng2BleedLowTempXBld = warning.new(msg: " -X BLEED...........OPEN", colour: "c"),
|
|
var eng2BleedLowTempOff = warning.new(msg: " -ENG 2 BLEED........OFF", colour: "c"),
|
|
var eng2BleedLowTempPack = warning.new(msg: " -PACK 2.............OFF", colour: "c"),
|
|
var eng2BleedLowTempIce = warning.new(msg: " -WING A.ICE.........OFF", colour: "c"),
|
|
var eng2BleedLowTempIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
var eng1BleedAbPress = warning.new(msg: "AIR ENG 1 BLEED ABNORM PR", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng1BleedAbPressPack = warning.new(msg: " -PACK 1.............OFF", colour: "c"),
|
|
var eng1BleedAbPressXBld = warning.new(msg: " -X BLEED...........OPEN", colour: "c"),
|
|
var eng2BleedAbPress = warning.new(msg: "AIR ENG 2 BLEED ABNORM PR", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng2BleedAbPressPack = warning.new(msg: " -PACK 1.............OFF", colour: "c"),
|
|
var eng2BleedAbPressXBld = warning.new(msg: " -X BLEED...........OPEN", colour: "c"),
|
|
var eng1BleedNotClsd = warning.new(msg: "AIR ENG 1 BLEED NOT CLSD", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng1BleedNotClsdOff = warning.new(msg: " -ENG 1 BLEED........OFF", colour: "c"),
|
|
var eng2BleedNotClsd = warning.new(msg: "AIR ENG 2 BLEED NOT CLSD", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng2BleedNotClsdOff = warning.new(msg: " -ENG 2 BLEED........OFF", colour: "c"),
|
|
var bleedMonFault = warning.new(msg: "BLEED MONITORING FAULT", colour: "a", isMainMsg: 1),
|
|
var bleedMon1Fault = warning.new(msg: "BLEED MONIT SYS 1 FAULT", colour: "a", isMainMsg: 1),
|
|
var bleedMon2Fault = warning.new(msg: "BLEED MONIT SYS 2 FAULT", colour: "a", isMainMsg: 1),
|
|
|
|
# PACK
|
|
var pack12Fault = warning.new(msg: "AIR PACK 1+2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var pack12FaultPackOff1 = warning.new(msg: " -PACK 1.............OFF", colour: "c"),
|
|
var pack12FaultPackOff2 = warning.new(msg: " -PACK 2.............OFF", colour: "c"),
|
|
var pack12FaultDescend = warning.new(msg: " -DESCENT TO FL 100/MEA ", colour: "c"),
|
|
var pack12FaultDiffPr = warning.new(msg: " .WHEN DIFF PR <1 PSI", colour: "w"),
|
|
var pack12FaultDiffPr2 = warning.new(msg: " AND FL BELOW 100 :", colour: "w"),
|
|
var pack12FaultRam = warning.new(msg: " -RAM AIR...........OPEN", colour: "c"),
|
|
var pack12FaultMax = warning.new(msg: " MAX FL..........100/MEA", colour: "c"),
|
|
var pack12FaultOvht = warning.new(msg: " .WHEN PACK OVHT OUT:", colour: "w"),
|
|
var pack12FaultPackOn1 = warning.new(msg: " -PACK 1..............ON", colour: "c"),
|
|
var pack12FaultPackOn2 = warning.new(msg: " -PACK 2..............ON", colour: "c"),
|
|
var pack1Ovht = warning.new(msg: "AIR PACK 1 OVHT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var pack1OvhtOff = warning.new(msg: " -PACK 1.............OFF", colour: "c"),
|
|
var pack1OvhtOut = warning.new(msg: " .WHEN PACK OVHT OUT:", colour: "w"),
|
|
var pack1OvhtPack = warning.new(msg: " -PACK 1..............ON", colour: "c"),
|
|
var pack2Ovht = warning.new(msg: "AIR PACK 2 OVHT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var pack2OvhtOff = warning.new(msg: " -PACK 2.............OFF", colour: "c"),
|
|
var pack2OvhtOut = warning.new(msg: " .WHEN PACK OVHT OUT:", colour: "w"),
|
|
var pack2OvhtPack = warning.new(msg: " -PACK 2..............ON", colour: "c"),
|
|
var pack1Fault = warning.new(msg: "AIR PACK 1 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var pack1FaultOff = warning.new(msg: " -PACK 1.............OFF", colour: "c"),
|
|
var pack2Fault = warning.new(msg: "AIR PACK 2 FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var pack2FaultOff = warning.new(msg: " -PACK 2.............OFF", colour: "c"),
|
|
var pack1Off = warning.new(msg: "AIR PACK 1 OFF", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var pack2Off = warning.new(msg: "AIR PACK 2 OFF", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var cabFanFault = warning.new(msg: "COND L+R CAB FAN FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var cabFanFaultFlow = warning.new(msg: " -PACK FLOW...........HI", colour: "c"),
|
|
var trimAirFault = warning.new(msg: "COND TRIM AIR SYS FAULT", colour: "a", isMainMsg: 1),
|
|
var trimAirFaultAft = warning.new(msg: " -AFT CAB TRIM VALVE", colour: "c"),
|
|
var trimAirFaultFwd = warning.new(msg: " -FWD CAB TRIM VALVE", colour: "c"),
|
|
var trimAirFaultCkpt = warning.new(msg: " -CKPT TRIM VALVE", colour: "c"),
|
|
|
|
# Eng AICE
|
|
var eng1IceClosed = warning.new(msg: "ANTI ICE ENG1 VALVE CLSD", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng1IceClosedIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
var eng2IceClosed = warning.new(msg: "ANTI ICE ENG2 VALVE CLSD", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng2IceClosedIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
var eng1IceOpen = warning.new(msg: "ANTI ICE ENG1 VALVE OPEN", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng1IceOpenThrust = warning.new(msg: " THRUST LIM PENALTY", colour: "c"),
|
|
var eng2IceOpen = warning.new(msg: "ANTI ICE ENG2 VALVE OPEN", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng2IceOpenThrust = warning.new(msg: " THRUST LIM PENALTY", colour: "c"),
|
|
|
|
# Wing AICE
|
|
var wingIceSysFault = warning.new(msg: "WING A.ICE SYS FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var wingIceSysFaultXbld = warning.new(msg: " -X BLEED...........OPEN", colour: "c"),
|
|
var wingIceSysFaultOff = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"),
|
|
var wingIceSysFaultIcing = warning.new(msg: " AVOID ICING CONDITIONS", colour: "c"),
|
|
var wingIceLOpen = warning.new(msg: "WING A.ICE L VALVE OPEN", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var wingIceLOpenOff = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"),
|
|
var wingIceLOpenEngOff = warning.new(msg: " -ENG1 BLEED.........OFF", colour: "c"),
|
|
var wingIceLOpenXbld = warning.new(msg: " -X BLEED...........SHUT", colour: "c"),
|
|
var wingIceLOpenApuOff = warning.new(msg: " -APU BLEED..........OFF", colour: "c"),
|
|
var wingIceLOpenFlt = warning.new(msg: " WAI AVAIL IN FLT", colour: "c"),
|
|
var wingIceLOpenEngOn = warning.new(msg: " -ENG1 BLEED.........OFF", colour: "c"),
|
|
var wingIceLOpenIceReq = warning.new(msg: " -WING ANTI ICE..AS RQRD", colour: "c"),
|
|
var wingIceLOpenThrust = warning.new(msg: " THRUST LIM PENALTY", colour: "c"),
|
|
var wingIceROpen = warning.new(msg: "WING A.ICE R VALVE OPEN", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var wingIceROpenOff = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"),
|
|
var wingIceROpenEngOff = warning.new(msg: " -ENG2 BLEED.........OFF", colour: "c"),
|
|
var wingIceROpenXbld = warning.new(msg: " -X BLEED...........SHUT", colour: "c"),
|
|
var wingIceROpenApuOff = warning.new(msg: " -APU BLEED..........OFF", colour: "c"),
|
|
var wingIceROpenFlt = warning.new(msg: " WAI AVAIL IN FLT", colour: "c"),
|
|
var wingIceROpenEngOn = warning.new(msg: " -ENG2 BLEED.........OFF", colour: "c"),
|
|
var wingIceROpenIceReq = warning.new(msg: " -WING ANTI ICE..AS RQRD", colour: "c"),
|
|
var wingIceROpenThrust = warning.new(msg: " THRUST LIM PENALTY", colour: "c"),
|
|
var wingIceOpenGnd = warning.new(msg: "WING A.ICE OPEN ON GND", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var wingIceOpenGndShut = warning.new(msg: " -WING ANTI ICE......OFF", colour: "c"),
|
|
|
|
var yawDamper1Fault = warning.new(msg: "AUTO FLT YAW DAMPER 1", colour: "a", isMainMsg: 1),
|
|
var yawDamper2Fault = warning.new(msg: "AUTO FLT YAW DAMPER 2", colour: "a", isMainMsg: 1),
|
|
# var rudTrim1Fault = warning.new(msg: "AUTO FLT RUD TRIM1 FAULT", colour: "a", isMainMsg: 1), not implemented
|
|
# var rudTrim2Fault = warning.new(msg: "AUTO FLT RUD TRIM2 FAULT", colour: "a", isMainMsg: 1), not implemented
|
|
var rudTravLimSys1Fault = warning.new(msg: "AUTO FLT RUD TRV LIM 1", colour: "a", isMainMsg: 1),
|
|
var rudTravLimSys2Fault = warning.new(msg: "AUTO FLT RUD TRV LIM 2", colour: "a", isMainMsg: 1),
|
|
var fcuFault1 = warning.new(msg: "AUTO FLT FCU 1 FAULT", colour: "a", isMainMsg: 1),
|
|
var fcuFault1Baro = warning.new(msg: " -BARO REF.......X CHECK", colour: "c"),
|
|
var fcuFault2 = warning.new(msg: "AUTO FLT FCU 2 FAULT", colour: "a", isMainMsg: 1),
|
|
var fcuFault2Baro = warning.new(msg: " -BARO REF.......X CHECK", colour: "c"),
|
|
|
|
var wingIceLHiPr = warning.new(msg: "WING A.ICE L HI PR", colour: "a", isMainMsg: 1),
|
|
var wingIceLHiPrThrust = warning.new(msg: " THRUST LIM PENTALTY", colour: "c"),
|
|
var wingIceRHiPr = warning.new(msg: "WING A.ICE R HI PR", colour: "a", isMainMsg: 1),
|
|
var wingIceRHiPrThrust = warning.new(msg: " THRUST LIM PENTALTY", colour: "c"),
|
|
|
|
# FIRE det fault
|
|
var eng1FireDetFault = warning.new(msg: "ENG 1 FIRE DET FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng1LoopAFault = warning.new(msg: "ENG 1 FIRE LOOP A FAULT", colour: "a", isMainMsg: 1),
|
|
var eng1LoopBFault = warning.new(msg: "ENG 1 FIRE LOOP B FAULT", colour: "a", isMainMsg: 1),
|
|
var eng2FireDetFault = warning.new(msg: "ENG 2 FIRE DET FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var eng2LoopAFault = warning.new(msg: "ENG 2 FIRE LOOP A FAULT", colour: "a", isMainMsg: 1),
|
|
var eng2LoopBFault = warning.new(msg: "ENG 2 FIRE LOOP B FAULT", colour: "a", isMainMsg: 1),
|
|
var apuFireDetFault = warning.new(msg: "APU FIRE DET FAULT", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var apuLoopAFault = warning.new(msg: "APU FIRE LOOP A FAULT", colour: "a", isMainMsg: 1),
|
|
var apuLoopBFault = warning.new(msg: "APU FIRE LOOP B FAULT", colour: "a", isMainMsg: 1),
|
|
var crgFwdFireDetFault = warning.new(msg: "FWD CRG DET FAULT", colour: "a", isMainMsg: 1),
|
|
var crgAftFireDetFault = warning.new(msg: "AFT CRG DET FAULT", colour: "a", isMainMsg: 1),
|
|
|
|
# Radios
|
|
var hf1Emitting = warning.new(msg: "COM HF 1 EMITTING", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
var hf2Emitting = warning.new(msg: "COM HF 2 EMITTING", colour: "a", aural: 1, light: 1, isMainMsg: 1),
|
|
|
|
# Recall
|
|
var recallNormal = warning.new(msg: " ", colour: "g", isMainMsg: 1),
|
|
var recallNormal1 = warning.new(msg: " ", colour: "g", isMainMsg: 1),
|
|
var recallNormal2 = warning.new(msg: " NORMAL", colour: "g", isMainMsg: 1),
|
|
]);
|
|
|
|
var configmemos = std.Vector.new([
|
|
var toMemoLine1 = warning.new(msg: "T.O AUTO BRK.....MAX", colour: "c", isMemo: 1),
|
|
var toMemoLine2 = warning.new(msg: " SIGNS.........ON", colour: "c", isMemo: 1),
|
|
var toMemoLine3 = warning.new(msg: " SPLRS........ARM", colour: "c", isMemo: 1),
|
|
var toMemoLine4 = warning.new(msg: " FLAPS........T.O", colour: "c", isMemo: 1),
|
|
var toMemoLine5 = warning.new(msg: " T.O CONFIG..TEST", colour: "c", isMemo: 1),
|
|
|
|
var ldgMemoLine1 = warning.new(msg: "LDG LDG GEAR......DN", colour: "c", isMemo: 1),
|
|
var ldgMemoLine2 = warning.new(msg: " SIGNS.........ON", colour: "c", isMemo: 1),
|
|
var ldgMemoLine3 = warning.new(msg: " SPLRS........ARM", colour: "c", isMemo: 1),
|
|
var ldgMemoLine4 = warning.new(msg: " FLAPS.......FULL", colour: "c", isMemo: 1),
|
|
]);
|
|
|
|
var leftmemos = std.Vector.new([
|
|
var company_alert = warning.new(msg: "COMPANY ALERT" ), # Not yet implemented, buzzer sound
|
|
var refuelg = warning.new(msg: "REFUELG" ),
|
|
var irs_in_align = warning.new(msg: "IRS IN ALIGN" ),
|
|
var gnd_splrs = warning.new(msg: "GND SPLRS ARMED" ),
|
|
var seatbelts = warning.new(msg: "SEAT BELTS" ),
|
|
var nosmoke = warning.new(msg: "NO SMOKING" ),
|
|
var strobe_lt_off = warning.new(msg: "STROBE LT OFF" ),
|
|
var outr_tk_fuel_xfrd = warning.new(msg: "OUTR TK FUEL XFRD" ),
|
|
var fob_3T = warning.new(msg: "FOB BELOW 3T" ),
|
|
var fob_66L = warning.new(msg: "FOB BELOW 6600LBS" ),
|
|
var gpws_flap_mode_off = warning.new(msg: "GPWS FLAP MODE OFF" ),
|
|
var atc_datalink_stby = warning.new(msg: "ATC DATALINK STBY" ), # Not yet implemented
|
|
var company_datalink_stby = warning.new(msg: "COMPANY DATALINK STBY"), # Not yet implemented
|
|
var acars_stby = warning.new(msg: "ACARS STBY" ), # Not yet implemented
|
|
]);
|
|
|
|
# Right E/WD
|
|
|
|
var specialLines = std.Vector.new([
|
|
var to_inhibit = memo.new(msg: "T.O. INHIBIT", colour: "m"),
|
|
var ldg_inhibit = memo.new(msg: "LDG INHIBIT", colour: "m"),
|
|
var land_asap_r = memo.new(msg: "LAND ASAP", colour: "r"),
|
|
var land_asap_a = memo.new(msg: "LAND ASAP", colour: "a"),
|
|
var ap_off = memo.new(msg: "AP OFF", colour: "r"),
|
|
var athr_off = memo.new(msg: "A/THR OFF", colour: "a")
|
|
]);
|
|
|
|
var secondaryFailures = std.Vector.new([
|
|
var secondary_bleed = memo.new(msg: ".AIR BLEED", colour: "a"), # Not yet implemented
|
|
var secondary_press = memo.new(msg: ".CAB PRESS", colour: "a"), # Not yet implemented
|
|
var secondary_vent = memo.new(msg: ".AVNCS VENT", colour: "a"), # Not yet implemented
|
|
var secondary_elec = memo.new(msg: ".ELEC", colour: "a"), # Not yet implemented
|
|
var secondary_hyd = memo.new(msg: ".HYD", colour: "a"), # Not yet implemented
|
|
var secondary_fuel = memo.new(msg: ".FUEL", colour: "a"), # Not yet implemented
|
|
var secondary_cond = memo.new(msg: ".AIR COND", colour: "a"), # Not yet implemented
|
|
var secondary_brake = memo.new(msg: ".BRAKES", colour: "a"), # Not yet implemented
|
|
var secondary_wheel = memo.new(msg: ".WHEEL", colour: "a"), # Not yet implemented
|
|
var secondary_fctl = memo.new(msg: ".F/CTL", colour: "a") # Not yet implemented
|
|
]);
|
|
|
|
var memos = std.Vector.new([
|
|
var spd_brk = memo.new(msg: "SPEED BRK" ),
|
|
var park_brk = memo.new(msg: "PARK BRK" ),
|
|
var ptu = memo.new(msg: "HYD PTU" ),
|
|
var rat = memo.new(msg: "RAT OUT" ),
|
|
var emer_gen = memo.new(msg: "EMER GEN" ),
|
|
var ram_air = memo.new(msg: "RAM AIR ON" ),
|
|
var pax_oxy = memo.new(msg: "OXY PAX ON" ),
|
|
var nw_strg_disc = memo.new(msg: "NW STRG DISC"),
|
|
var ignition = memo.new(msg: "IGNITION" ),
|
|
var eng1Cowl = memo.new(msg: "ENG 1 COWL" ), # Not yet implemented (NEO)
|
|
var eng2Cowl = memo.new(msg: "ENG 2 COWL" ), # Not yet implemented (NEO)
|
|
var cabin_ready = memo.new(msg: "CABIN READY" ), # Not yet implemented
|
|
var pred_ws_off = memo.new(msg: "PRED W/S OFF"), # Not yet implemented
|
|
var terr_stby = memo.new(msg: "TERR STBY" ), # Not yet implemented
|
|
var tcas_stby = memo.new(msg: "TCAS STBY" ),
|
|
var company_call = memo.new(msg: "COMPANY CALL"),
|
|
var satcom_alert = memo.new(msg: "SATCOM ALERT"), # Not yet implemented
|
|
var company_msg = memo.new(msg: "COMPANY MSG" ),
|
|
var eng_aice = memo.new(msg: "ENG A.ICE" ),
|
|
var wing_aice = memo.new(msg: "WING A.ICE" ),
|
|
var ice_not_det = memo.new(msg: "ICE NOT DET" ), # Not yet implemented
|
|
var hi_alt = memo.new(msg: "HI ALT" ), # Not yet implemented
|
|
var apu_avail = memo.new(msg: "APU AVAIL" ),
|
|
var apu_bleed = memo.new(msg: "APU BLEED" ),
|
|
var ldg_lt = memo.new(msg: "LDG LT" ),
|
|
var brk_fan = memo.new(msg: "BRK FAN" ),
|
|
var audio3_xfrd = memo.new(msg: "AUDIO 3 XFRD"), # Not yet implemented
|
|
var switchg_pnl = memo.new(msg: "SWITCHG PNL" ), # Not yet implemented
|
|
var gpws_flap3 = memo.new(msg: "GPWS FLAP 3" ),
|
|
var hf_data_ovrd = memo.new(msg: "HF DATA OVRD"), # Not yet implemented
|
|
var hf_voice = memo.new(msg: "HF VOICE" ), # Not yet implemented
|
|
var vhf3_voice = memo.new(msg: "VHF3 VOICE" ),
|
|
var auto_brk_lo = memo.new(msg: "AUTO BRK LO" ),
|
|
var auto_brk_med = memo.new(msg: "AUTO BRK MED"),
|
|
var auto_brk_max = memo.new(msg: "AUTO BRK MAX"),
|
|
var auto_brk_off = memo.new(msg: "AUTO BRK OFF"), # Not yet implemented
|
|
var man_ldg_elev = memo.new(msg: "MAN LDG ELEV"), # Not yet implemented
|
|
var ctr_tk_feedg = memo.new(msg: "CTR TK FEEDG"),
|
|
var fuelx = memo.new(msg: "FUEL X FEED" ),
|
|
var adirs_switch = memo.new(msg: "ADIRS SWTG" ) # Not yet implemented
|
|
]);
|
|
|
|
var clearWarnings = std.Vector.new();
|
|
|
|
# Status SD page
|
|
var statusLim = std.Vector.new([
|
|
var min_rat_spd = status.new(msg: "MIN RAT SPD.....140 KT", colour: "c"), # Not yet implemented
|
|
var max_spd_gear = status.new(msg: "MAX SPD........280/.67", colour: "c"), # Not yet implemented
|
|
var max_spd_rev = status.new(msg: "MAX SPD........300/.78", colour: "c"), # Not yet implemented
|
|
var buffet_rev = status.new(msg: " .IF BUFFET :", colour: "w"), # Not yet implemented
|
|
var max_spd_rev_buf = status.new(msg: "MAX SPD.............240", colour: "c"), # Not yet implemented
|
|
var max_spd_fctl = status.new(msg: "MAX SPD........320/.77", colour: "c"), # Not yet implemented
|
|
var max_spd_fctl2 = status.new(msg: "MAX SPD.........300 KT", colour: "c"), # Not yet implemented
|
|
var max_spd_gr_door = status.new(msg: "MAX SPD 250/.60", colour: "c"), # Not yet implemented
|
|
var max_alt_press = status.new(msg: "MAX FL : 100/MEA", colour: "c"), # Not yet implemented
|
|
var gravity_fuel = status.new(msg: "-PROC:GRAVTY FUEL FEEDING", colour: "c"), # Not yet implemented
|
|
var gear_kp_dn = status.new(msg: "L/G............KEEP DOWN", colour: "c"), # Not yet implemented
|
|
var park_brk_only = status.new(msg: "PARK BRK ONLY", colour: "c"), # Not yet implemented
|
|
var park_brk_only = status.new(msg: "MAX BRK PR........1000PSI", colour: "c"), # Not yet implemented
|
|
var fuel_gravity = status.new(msg: "FUEL GRAVTY FEED", colour: "c"), # Not yet implemented
|
|
var fctl_manvr = status.new(msg: "MANOEUVER WITH CARE", colour: "c"), # Not yet implemented
|
|
var fctl_spdbrk_care = status.new(msg: "USE SPD BRK WITH CARE", colour: "c"), # Not yet implemented
|
|
var fctl_spdbrk_dont = status.new(msg: "SPD BRK......DO NOT USE", colour: "c"), # Not yet implemented
|
|
var fctl_rud_care = status.new(msg: "RUD WITH CARE ABV 160KT", colour: "c"), # Not yet implemented
|
|
var eng_thr_changes = status.new(msg: "AVOID RAPID THR CHANGES", colour: "c"), # Not yet implemented
|
|
var avoid_neg_g_fac = status.new(msg: "AVOID NEGATIVE G FACTOR", colour: "c"), # Not yet implemented
|
|
var avoid_icing = status.new(msg: "AVOID ICING CONDITONS", colour: "c"), # Not yet implemented
|
|
var severe_icing = status.new(msg: " IF A/C ICING SEVERE :", colour: "w"), # Not yet implemented, a319 only
|
|
var severe_icing_2 = status.new(msg: "MIN SPD ALPHA PROT", colour: "c"), # Not yet implemented, a319 only
|
|
var avoid_thr_chg = status.new(msg: "AVOID THR CHANGES", colour: "c"), # Not yet implemented, iae only
|
|
var avoid_thr_chg_2 = status.new(msg: "AVOID RAPID THR CHANGES", colour: "c"), # Not yet implemented, iae only
|
|
var avoid_adv_cond = status.new(msg: "AVOID ADVERSE CONDITIONS", colour: "c"), # Not yet implemented, iae only
|
|
var atc_com_voice = status.new(msg: "ATC COM VOICE ONLY", colour: "c") # Not yet implemented, iae only
|
|
]);
|
|
|
|
var statusApprProc = std.Vector.new([
|
|
var dual_hyd_b_g = status.new(msg: "APPR PROC DUAL HYD LO PR", colour: "r"), # Not yet implemented
|
|
var dual_hyd_b_g_2 = status.new(msg: " .IF BLUE OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_g_3 = status.new(msg: "-BLUE ELEC PUMP.....AUTO", colour: "c"), # Not yet implemented
|
|
var dual_hyd_b_g_4 = status.new(msg: " .IF GREEN OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_g_5 = status.new(msg: "-GREEN ENG 1 PUMP.....ON", colour: "c"), # Not yet implemented
|
|
var dual_hyd_b_g_6 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented
|
|
|
|
var dual_hyd_b_y = status.new(msg: "APPR PROC DUAL HYD LO PR", colour: "r"), # Not yet implemented
|
|
var dual_hyd_b_y_2 = status.new(msg: " .IF BLUE OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_y_3 = status.new(msg: "-BLUE ELEC PUMP.....AUTO", colour: "c"), # Not yet implemented
|
|
var dual_hyd_b_y_4 = status.new(msg: " .IF YELLOW OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_y_5 = status.new(msg: "-YELLOW ENG 2 PUMP....ON", colour: "c"), # Not yet implemented
|
|
var dual_hyd_b_y_6 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented
|
|
|
|
var dual_hyd_g_y = status.new(msg: "APPR PROC DUAL HYD LO PR", colour: "r"), # Not yet implemented
|
|
var dual_hyd_g_y_2 = status.new(msg: " .IF GREEN OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var dual_hyd_b_y_3 = status.new(msg: "-GREEN ENG 1 PUMP.....ON", colour: "c"), # Not yet implemented
|
|
var dual_hyd_g_y_4 = status.new(msg: " .IF YELLOW OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var dual_hyd_g_y_5 = status.new(msg: "-YELLOW ENG 2 PUMP....ON", colour: "c"), # Not yet implemented
|
|
var dual_hyd_g_y_6 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented
|
|
|
|
var single_hyd_b = status.new(msg: "APPR PROC HYD LO PR", colour: "a"), # Not yet implemented
|
|
var single_hyd_b_2 = status.new(msg: " .IF BLUE OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var single_hyd_b_3 = status.new(msg: "-BLUE ELEC PUMP.....AUTO", colour: "c"), # Not yet implemented
|
|
|
|
var single_hyd_g = status.new(msg: "APPR PROC HYD LO PR", colour: "a"), # Not yet implemented
|
|
var single_hyd_g_2 = status.new(msg: " .IF GREEN OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var single_hyd_g_3 = status.new(msg: "-GREEN ENG 1 PUMP.....ON", colour: "c"), # Not yet implemented
|
|
var single_hyd_g_4 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented
|
|
|
|
var single_hyd_y = status.new(msg: "APPR PROC HYD LO PR", colour: "a"), # Not yet implemented
|
|
var single_hyd_y_2 = status.new(msg: " .IF YELLOW OVHT OUT:", colour: "w"), # Not yet implemented
|
|
var single_hyd_y_3 = status.new(msg: "-YELLOW ENG 1 PUMP....ON", colour: "c"), # Not yet implemented
|
|
var single_hyd_y_4 = status.new(msg: "-PTU................AUTO", colour: "c"), # Not yet implemented
|
|
|
|
var avionics_smk = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented
|
|
var avionics_smk_2 = status.new(msg: " .BEFORE L/G EXTENSION :", colour: "w"), # Not yet implemented
|
|
var avionics_smk_2 = status.new(msg: "-GEN 2...............ON", colour: "c"), # Not yet implemented
|
|
var avionics_smk_4 = status.new(msg: "-EMER ELEC GEN1 LINE ON", colour: "c"), # Not yet implemented
|
|
|
|
var ths_stuck = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented
|
|
var ths_stuck_2 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented
|
|
var ths_stuck_3 = status.new(msg: "-GPWS LDG FLAP 3.....ON", colour: "c"), # Not yet implemented
|
|
var ths_stuck_4 = status.new(msg: " .IF MAN TRIM NOT AVAIL:", colour: "w"), # Not yet implemented
|
|
var ths_stuck_5 = status.new(msg: " .WHEN CONF3 AND VAPP :", colour: "w"), # Not yet implemented
|
|
var ths_stuck_6 = status.new(msg: "-L/G.................DN", colour: "c"), # Not yet implemented
|
|
|
|
var flap_stuck = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented
|
|
var flap_stuck_2 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented
|
|
var flap_stuck_3 = status.new(msg: "-FLAPS...KEEP CONF FULL", colour: "c"), # Not yet implemented
|
|
var flap_stuck_4 = status.new(msg: "-GPWS FLAP MODE.....OFF", colour: "c"), # Not yet implemented
|
|
var flap_stuck_5 = status.new(msg: "-GPWS LDG FLAP 3.....ON", colour: "c"), # Not yet implemented
|
|
|
|
var slat_stuck = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented
|
|
var slat_stuck_2 = status.new(msg: "-FOR LDG.....USE FLAP 1", colour: "c"), # Not yet implemented
|
|
var slat_stuck_3 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented
|
|
var slat_stuck_4 = status.new(msg: "-CTR TK PUMPS.......OFF", colour: "c"), # Not yet implemented
|
|
var slat_stuck_5 = status.new(msg: "-GPWS LDG FLAP 3.....ON", colour: "c"), # Not yet implemented
|
|
var slat_stuck_6 = status.new(msg: "-GPWS FLAP MODE.....OFF", colour: "c"), # Not yet implemented
|
|
|
|
var fctl_proc = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented
|
|
var fctl_proc_2 = status.new(msg: " .IF BUFFET:", colour: "w"), # Not yet implemented
|
|
var fctl_proc_3 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented
|
|
var fctl_proc_4 = status.new(msg: "-GPWS LDG FLAP 3.....ON", colour: "c"), # Not yet implemented
|
|
var fctl_proc_5 = status.new(msg: "-AT 1000FT AGL:L/G...DN", colour: "c"), # Not yet implemented
|
|
|
|
var rev_unlc_proc = status.new(msg: "APPR PROC:", colour: "w"), # Not yet implemented
|
|
var rev_unlc_proc_2 = status.new(msg: " .IF BUFFET:", colour: "w"), # Not yet implemented
|
|
var rev_unlc_proc_3 = status.new(msg: "-FOR LDG.....USE FLAP 3", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_4 = status.new(msg: "-APPR SPD : VREF + 55KT", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_5 = status.new(msg: "-APPR SPD : VREF + 60KT", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_6 = status.new(msg: "-RUD TRIM.......5 DEG R", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_7 = status.new(msg: "-RUD TRIM.......5 DEG L", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_8 = status.new(msg: "-ATHR...............OFF", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_9 = status.new(msg: "-GPWS FLAP MODE.....OFF", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_10 = status.new(msg: " .WHEN LDG ASSURED:", colour: "w"), # Not yet implemented
|
|
var rev_unlc_proc_11 = status.new(msg: "-L/G...............DOWN", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_12 = status.new(msg: " .AT 800FT AGL:", colour: "w"), # Not yet implemented
|
|
var rev_unlc_proc_13 = status.new(msg: "-TARGET SPD : VREF+40KT", colour: "c"), # Not yet implemented
|
|
var rev_unlc_proc_14 = status.new(msg: "-TARGET SPD : VREF+45KT", colour: "c"), # Not yet implemented
|
|
|
|
var thr_lvr_flt = status.new(msg: "APPR PROC THR LEVER", colour: "a"), # Not yet implemented
|
|
var thr_lvr_flt_2 = status.new(msg: "-AUTOLAND...........USE", colour: "c"), # Not yet implemented
|
|
var thr_lvr_flt_3 = status.new(msg: " .IF AUTOLAND NOT USED:", colour: "w"), # Not yet implemented
|
|
var thr_lvr_flt_4 = status.new(msg: " .AT 500FT AGL :", colour: "w"), # Not yet implemented
|
|
var thr_lvr_flt_5 = status.new(msg: "-ENG MASTER 1.......OFF", colour: "c"), # Not yet implemented
|
|
var thr_lvr_flt_6 = status.new(msg: "-ENG MASTER 2.......OFF", colour: "c"), # Not yet implemented
|
|
|
|
var fuel_ctl_flt = status.new(msg: "APPR PROC FUEL CTL FAULT", colour: "a"), # Not yet implemented
|
|
var fuel_ctl_flt_2 = status.new(msg: "REV 1........DO NOT USE", colour: "w"), # Not yet implemented
|
|
var fuel_ctl_flt_3 = status.new(msg: "REV 2........DO NOT USE", colour: "w"), # Not yet implemented
|
|
var fuel_ctl_flt_4 = status.new(msg: " .AFTER TOUCHDOWN:", colour: "w"), # Not yet implemented
|
|
var fuel_ctl_flt_5 = status.new(msg: "-ENG MASTER 1.......OFF", colour: "c"), # Not yet implemented
|
|
var fuel_ctl_flt_6 = status.new(msg: "-ENG MASTER 2.......OFF", colour: "c") # Not yet implemented
|
|
]);
|
|
|
|
var statusProc = std.Vector.new();
|
|
var statusInfo = std.Vector.new();
|
|
var statusCancelled = std.Vector.new();
|
|
var statusInop = std.Vector.new();
|
|
var statusMaintenance = std.Vector.new();
|
|
|
|
# hack thrust lock message:
|
|
var msgSave = athr_lock.msg;
|